Philips MCM128B/05 User manual

Quick Start Guide
Step B
Step A
Enjoy
Setup
What’s in the Box?
You should find these items upon opening the box.
MCM128B
1
Quick Start Guide
Quick Start Guide
2
User Manual
User manual
MW antenna
Pull out the insulation
plastic sheet.
VOLUME
ALBUM
DBB DSC
MUTE
SLEEP TIMER
REPEAT SHUFF
AUX PROG
CD TUNER
VOLUME
DBB DSC
Remote Control
MCM128B_05 QSG_Eng 22/11/06, 17:221

Step A Setup
1
2
3
Tip
It is unnecessary to
connect the FM pigtail
antenna since it is
fixed to the main unit.
Connection
5
1
2
3
4
Setting the clock
For radio reception, connect the supplied MW antenna to the
MW aerial terminal.
Connect the speaker wires to the SPEAKERS terminals,
marked red wire to “+”, marked black wire to “-”.
Connect the power cord of the system to the
AC power outlet.
In standby mode, press PROG/CLOCK button.
The clock digits for the hours flash.
Press ¡1 / 2™ to set the hours.
Press PROG/CLOCK again.The clock digits for the minutes flash.
Press ¡1 / 2™ to set the minutes.
Press PROG/CLOCK to confirm the time.
iR
USB DIRECT
PROG/CLOCK
MICRO SYSTEM MCM128
AC MAINS~
RIGHT
FM
aerial
LEFT
AC power cord
FM wire antenna
Speaker
(right)
Speaker
(left)
MW loop antenna
1
2
2
3
MCM128B_05 QSG_Eng 22/11/06, 17:222

1
2
3
4
5
Tip
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
Step B Enjoy
Playing a disc
1
2
Select TUNER source.
Press BAND (TUNER on the remote control) to select your waveband.
Tu r n TUNING 0to tune to a station.
Listening to radio
3
SLEEP TIMER
REPEAT SHUFF
PROG
CD TUNER
MUTE
CD
ALBUM
USB
STANDBY-ON SOURCE VOLUME
-
+
BAND
O
P
E
N
/
C
L
O
S
E
PROG/CLOCK TUNING
SOURCE BAND TUNING
Select CD source.
Press OPEN•CLOSE on the top of the system to open the CD door.
Insert a disc with the printed side facing up and press down
on OPEN•CLOSE to close the CD door.
PressÉÅto start playback.
Press 9to stop playback.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or AUX,
for example).
–Then select the desired function ( 2;,
í, ëfor example).
MCM128B_05 QSG_Eng 22/11/06, 17:223

Step B Enjoy
Playing a USB mass storage device
1
2
3
4
5
Make sure that your MCM128B is being powered on.
Press SOURCE repeatedly (or USB on the remote) to enter USB mode.
The LCD display shows- - - with USB DIRECT.
Plug a compatible USB mass storage device to MCM128B’s USB port marked .
If needed, use a suitable USB cable to connect between the device and MCM128’s USB port.
The device will automatically power on.
PressÉÅon your MCM128B to start playback.
Press 9to stop playback.
2006 CKoninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com PDCC-JH-0647
Tip
Refer to the user manual supplied for
the description about compatibility of
USB mass storage device, and
playability of the files stored on the
USB device.
Notes for USB usage:
–This micro system is able to support most USB mass storage devices on the current market.
–In case this micro system fails to identify your USB device, please unplug it and then plug it again. For
USB devices designed with batteries, if the problem remains, please ensure sufficient power supply to
your USB devices by replacing/recharging the batteries.
–You may not be able to play bought tracks in your USB device through this system, such as those
bought from the Apple iTunes or Microsoft PlaysForSure websites!
–This micro system is designed for playback of digital music formats MP3 andWMA only and does not
support WMA-DRM,AAC,WAV, M4a, M4b etc.
–Never try to connect this micro system with your PC through a USB cable to avoid any possible
damage!
MCM128B_05 QSG_Eng 22/11/06, 17:224