Philips MCW770 User manual

MCW770
Wireless PC Link Micro
User manual
Manuel d'utilisation
MC W770/22.1 eng 7/23/04 16:07 Page 1

Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved 13 Amp plug.To
change a fuse in this type of plug proceed as follows:
1Remove fuse cover and fuse.
2
Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI
approved type.
3Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5
Amp. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5 Amp.
Note:The severed plug must be disposed of to avoid a possible
shock hazard should it be inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following
code: blue = neutral (N), brown = live (L).
00As these colours may not correspond with the colour markings
identifying the terminals in your plug, proceed as follows:
– Connect the blue wire to the terminal marked N or col-
oured black.
– Connect the brown wire to the terminal marked L or col-
oured red.
– Do not connect either wire to the earth terminal in the
plug, marked E (or e)or coloured green (or green and
yellow).
Before replacing the plug cover, make certain that the cord grip
is clamped over the sheath of the lead - not simply over the
two wires.
Copyright in the U.K.
Recording and playback of material may require consent. See
Copyright Act 1956 and The Performer’s Protection Acts 1958 to
1972.
2
MC W770/22.1 eng 7/23/04 16:07 Page 2

3
Norge
Typeskilt finnes på apparatens bakside.
Observer: Nettbryteren er sekundert innkoplet. Den
innebygde netdelen er derfor ikke frakoplet nettet så
lenge apparatet er tilsluttet
nettkontakten.
For å redusere faren for brann eller elektrisk støt, skal apparatet
ikke utsettes for regn eller fuktighet.
NAVIGATION (Example only)
9Server 1 Server 1 Server 1 Server 1 :
65
ALBUM 9: ARTIST 9: GENRE 9: ........ 9: T1 9: T2....
Pop 9: Jazz 9: Classic
65 65 65
9T1,T2,T3.. ------- T1,T2,T3.. ------- T1,T2,T3... :
Madonna 9: Pink 9: Dido
65 65 65
9T1,T2,T3 ------- T1,T2,T3 ------- T1,T2,T3 :
Album 1 9: Album2 9: Album3
65 65 65
9T1,T2,T3 ------- T1,T2,T3 ------- T1,T2,T3 :
9PLAY T2.. :
1See page 24 / Voir page 83
MC W770/22.1 eng 7/23/04 16:07 Page 3

MC W770/22.1 eng 7/23/04 16:07 Page 4

Index
EnglishFrançais
5
English ___________________________________ 6
Français ________________________________ 65
MC W770/22.1 eng 7/23/04 16:07 Page 5

Technical data __________________ 8
General information
Supplied accessories ________________ 8
Environmental information ___________ 9
Maintenance ______________________ 9
Disc handling _____________________ 9
Setup ___________________________ 9
Remote control
Remote control usage _____________ 10
Remote control keys ___________ 10–11
Controls and connections
On the back _____________________ 12
On the front __________________ 12–13
Installation
Speaker connections _______________ 14
Antenna connections ______________ 14
AM/MW antenna ______________ 14
FM antenna ___________________ 14
Installing a PC server ______________ 15
Connecting an additional appliance ___ 15
Mains __________________________ 15
Wireless PC link
PC system requirements ___________ 16
Quick installation ______________ 16–20
Firmware upgrade ________________ 21
Preparation for wireless PC link
playback function _________________ 21
Adding music files to the Philips Media
Manager ________________________ 22
Opening and closing the Philips Media
Manager window _________________ 22
PC LINK function _________________ 23
How to display the current
server name __________________ 23
How to select another PC server __ 23
How to select another network ___ 23
Tr ack navigation and playback ________ 24
During playback _______________ 24
Custom installation _____________ 25–32
Manual installation of the driver
for the wireless USB adapter, the
Philips Media Manager software and the
network setup ________________ 25
Installation of an additional audio
system or recovery if audio system
PC link settings are lost _______ 26–27
Installation of an additional PC server
or recovery of PC link settings
on your PC ________________ 27–28
Integration of MC W770 into an
existing (home) network _____ 29–32
Network utilities _______________ 33–36
Check connection ______________ 33
Change of USB port using the
MC W770 _________________ 33–34
Change of the wireless channel
___35–36
Using a different wireless network
adapter ______________________ 37–42
Basic functions
Switching on, switching to standby ____ 43
Demonstration mode ______________ 43
Setting the clock __________________ 44
Displaying the clock _______________ 44
Dim mode ______________________ 44
Volume control ___________________ 45
Volume adjustment _____________ 45
MUTE _______________________ 45
Sound control ____________________ 45
DSC ________________________ 45
VEC ________________________ 45
Playback
Playable discs ____________________ 46
Loading discs ____________________ 46
Playing discs _____________________ 47
Direct selection and playback
of one particular disc ___________ 47
Playback of all loaded discs _______ 47
Contents
6
English
MC W770/22.1 eng 7/23/04 16:07 Page 6

To stop playback __________________ 47
Interrupting and resuming playback
___ 47
Playback features
Selecting and searching _____________ 48
Selecting a track when playback is
stopped _____________________ 48
Selecting a track during playback ___ 48
Searching for a passage during
playback _____________________ 48
Additional selecting and searching (on
MP3-CDs only) __________________ 48
Selecting an album when playback is
stopped _____________________ 48
Selecting an album during playback _48
Selecting a track in the album _____ 48
Album and track name display (on
MP3-CDs only) __________________ 49
SHUFFLE and REPEAT _____________ 49
Repeating a track, a disc or a
programme ___________________ 49
SHUFFLE - Playing tracks in
random order _________________ 49
Programming track numbers ________ 50
Clearing the programme ___________ 50
Tuner
Tuning to radio stations ____________ 51
Storing radio stations ___________ 51–52
Storing by using “Plug and Play” ___ 51
Storing by automatic programming _52
Storing by manual programming ___ 52
Tuning to preset radio stations _______ 52
Deleting a preset radio station _______ 52
RDS ___________________________ 53
Switching through RDS
information ___________________ 53
Automatic clock setting via RDS ___ 53
NEWS _________________________ 54
Activating the NEWS function ____ 54
Deactivating the NEWS function __ 54
Timer
Wake-up timer ________________ 55–56
Timer setting __________________ 55
Activating or deactivating
the timer _____________________ 56
Checking the timer setting ________ 56
Sleep timer ______________________ 56
Troubleshooting _____________ 57–58
Frequently asked questions __ 59–64
This set complies with the radio
interference requirements of the
European Community.
Hereby Philips Consumer Electronics,
BCU Audio Video Entertainment,
declares that this product MC W770 is
in compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC.
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in
hazardous radiation exposure or
other unsafe operation.
DANGER
Invisible laser radiation when open.
AVOID DIRECT EXPOSURE TO
BEAM.
Contents
7
English
MC W770/22.1 eng 7/23/04 16:07 Page 7

Technical data
Subject to modification without notice.
General
AC Power ___________ 230V / 50–60Hz
Power consumption
Active ______________________ 44 W
Standby ___________________ < 10 W
Eco Power Standby _________ < 0.5 W
Dimensions,
w × h × d ________ 175 ×285 ×340 mm
Weight (without speakers) _______ 5.5 kg
Amplifier
Output power ________ 2 x 150 W MPO
2 x 75 W RMS (6 Ω,1kHz, 10% THD)
Frequency response _50–20000 Hz, - 3dB
S/N ratio _____________ ≥75 dBA (IEC)
Input sensitivity
AUX/CDR IN __________ 500 mV/1V
Output
Impedance speakers _________ ≥6 Ω
Impedance headphones 32 Ω– 1000 Ω
CD changer
Number of programmable tracks ____ 99
Frequency range ____ 50–20000 Hz, - 3dB
S/N ratio _____________ ≥75 dBA (IEC)
Channel separation ____ ≥60 dB (1 kHz)
MPEG 1 Layer 3 (MP3-CD) __ MPEG AUDIO
MP3-CD bit rate _________ 32-256 kbps
128 kbps advised
Sampling frequencies ___ 32, 44.1, 48 kHz
Wireless PC LINK
Wireless standard ____________ 802.11b
Frequency range ____ 50–20000 Hz, - 3dB
S/N ratio _____________ ≥75 dBA (IEC)
Total harmonic distortion _____ 0.3% (1 kHz)
Tuner
Wave range
FM ________________ 87.5–108 MHz
MW _______________ 531–1602 kHz
Number of presets _______________ 40
Antenna
FM _____________________ 75 Ωwire
AM _________________ Loop antenna
Speakers
System _____________ 3 way, Bass reflex
Impedance _____________________ 6 Ω
Woofer ____________________ 1 x 6.5"
Tweeter _____________________ 1 x 2"
Dimensions,
w × h × d ________ 175 ×285 ×248 mm
Weight __________________ 3.1 kg each
Supplied accessories
– PC link software installer CD-ROM
– Wireless USB adapter and
extension cable
– Remote control and 2 batteries, size AA
–2loudspeaker boxes including
2 speaker cables
– AM loop antenna
– FM wire antenna
– Mains cable
Technical data / General information
8
English
MC W770/22.1 eng 7/23/04 16:07 Page 8

Environmental information
All redundant packing material has been
omitted.We have done our utmost to
make the packaging easily separable into
three mono materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet).
Your set consists of materials which can be
recycled if disassembled by a specialised
company. Please observe the local
regulations regarding the disposal of packing
materials, exhausted batteries and old
equipment.
Maintenance
Clean the set with a
soft, slightly dampened,
lint-free cloth. Do not
use any cleaning agents
as they may have a
corrosive effect.
Do not expose the set,
batteries or discs to
humidity, rain, sand or
excessive heat (caused by
heating equipment or
direct sunlight).
Always keep the trays of
your set closed to protect the lens from
dust. If the set fails to read discs correctly
use a commonly available cleaning-CD to
clean the lens before submitting the set to
repair. Other cleaning methods may destroy
the lens.
The lens may cloud over when the set is
moved from cold to warm surroundings.
Playing a disc is not possible then. Leave the
set in a warm environment until the
moisture evaporates.
Disc handling
To take a disc out of
its box easily, press the
centre spindle while lifting
it. After use, always take
the disc out of the set
and store it in the disc case.
Never attach a sticker to a disc. If you want
to provide a disc with an inscription use a
soft felt-tipped pen and write only on the
printed side.
To clean a disc, wipe it
in a straight line from the
centre towards the edge
using a soft, lint-free cloth.
Any cleaning agents may
damage the disc!
Setup
Place the set on a flat, hard and stable
surface.
Do not position the set on top of other
equipment that might heat it up (e.g.
receiver or amplifier).
Place the apparatus in a
location with adequate
ventilation to prevent
internal heat build up.
Allow at least 10 cm
(4 inches) clearance
from the rear and the
top of the unit and 5 cm (2 inches)
from each side.
The apparatus shall not be exposed to
dripping or splashing.
Do not place any sources of danger on the
apparatus (e.g. liquid filled objects, lighted
candles).
Do not block any ventilation openings.
General information
9
English
5 cm
2 inches
5 cm
2 inches
10 cm
4 inches
10 cm
4 inches
MC W770/22.1 eng 7/23/04 16:07 Page 9

Remote control usage
1Open the battery compartment of the
remote control and insert 2 alkaline
batteries, type AA (R06, UM-3).
2Close the battery compartment.
Do not use old and new or different types
of batteries in combination.
Remove batteries if they are empty or if the
remote control will not be used for a long
time.
Batteries contain chemical substances,
so they should be disposed of properly.
The buttons on the remote control work
the same way as the corresponding ones
on the set.
Important!
Always select the source you wish to
control first by pressing one of the source
keys on the remote control (e. g. CD,
TUNER).Then select the desired function
(e.g. 4,¢,ÉÅ).
The remote control remains tuned to the
selected source until another source button
on the remote control is pressed.
Remote control keys
Remote control
10
English
AUX PC LINK
1
#
2
3
4
7
6
@
!
$
%
*
^
&
¡
)
™
0
(
TUNERCD
SHUFFLEPROGRAM
TIMERCLOCKSLEEP
DSC VECDIM
MUTE
CD1CD2CD3
CD5
CD4
ALBUM
VOL
9
REPEAT
RDS/NEWS
TIMER ON/OFF
8
DISPLAY
5
HOME
BROWSE
MC W770/22.1 eng 7/23/04 16:07 Page 10

12
switches the set to (Eco Power) standby
2Source buttons
CD
selects the CD changer
TUNER
selects the tuner and toggles between the
wavebands: TUNER FM and TUNER MW
AUX
selects the input for an additional connected
appliance and toggles between the input
sensitivities: AUX (high level input sensitivity)
and AUX CDR (low level input sensitivity)
PC LINK A
selects the connected PC as source
3CD1,CD2,CD3,CD4,CD5
selects a disc tray and starts playback
4VOLUME-,VOLUME+
decreases/increases the volume level
5ALBUM ∞ BROWSE-,
ALBUM 5 BROWSE+
CD: selects the previous/next album on an
MP3-CD
TUNER: selects the previous/next preset
radio station
PC LINK: selects the previous/next level
CLOCK or TIMER: sets the hours
6Ç
stops playback
7ÉÅ
starts and interrupts playback
84,¢
CD:
– selects the previous/next track
– searches backwards/forwards (press and
hold the button) within the current track
TUNER: tunes to a lower/higher radio
frequency (press and hold the button for
more than a half second)
CLOCK or TIMER: sets the minutes
PC LINK: selects the previous/next item
9DISPLAY
CD: displays the album and track name on
an MP3-CD
PC LINK: switches between displaying the
elapsed playing time, the track name and
the file name
0SHUFFLE
plays tracks in random order
!PROGRAM
enters the programme menu
@REPEAT
repeats a track, a disc or programmed track(s)
#SLEEP
sets the sleep timer
$CLOCK
– displays the set time
– enters the clock setting mode (press and
hold for more than 2 seconds)
%TIMER
– displays the timer setting
– enters the timer setting mode (press
and hold for more than 2 seconds)
^TIMER ON/OFF
switches the timer on/off
&VEC
selects predefined surround sound settings
*DSC
selects predefined sound settings
(DIM
controls the brightness of the display
)RDS/NEWS
TUNER: selects RDS information
In other modes: activates/deactivates news
¡HOME
PC LINK: returns to the first level of the
file structure
™MUTE
switches the sound off temporarily
Remote control
11
English
MC W770/22.1 eng 7/23/04 16:07 Page 11

On the back
1SPEAKERS 6 ΩL/R
connect to the supplied speakers
2AC MAINS ~
After all other connections have been
made, connect the mains lead to the wall
socket.
3AUX/CDR IN R/L
connect to the analogue audio output of
an additional appliance
4AM ANTENNA
connect the supplied loop antenna here
5FM ANTENNA
connect the supplied wire antenna here
On the front
6DISC 1,DISC 2,DISC 3,DISC 4,
DISC 5
selects a disc tray and starts playback
7OPEN/CLOSE /
opens/closes the disc tray
8disc trays
Controls and connections
12
English
6
1
2
3
5
4
6
7
8
!
#
@
%
$
^
9
0
≤£™¡&
*(
)
MC W770/22.1 eng 7/23/04 16:07 Page 12

9STANDBY-ON 2
switches the set to (Eco Power) standby
0iR
sensor for the infrared remote control
Note: Always point the remote control
towards this sensor.
!display
@source control lights
when a source is active the respective
control light lights up
#SOURCE
toggles between the sources:
CD: the CD changer is selected
TUNER FM: the FM tuner waveband is
selected
TUNER MW: the MW tuner waveband is
selected
AUX: the high level input sensitivity for an
additional connected appliance is selected
AUX CDR: the low level input sensitivity for
an additional connected appliance is
selected
$HOME
PC LINK: returns to the first level of the
file structure
%PC LINK A
selects the connected PC as source
^VOLUME rotary
adjusts the volume
&ÉÅ
starts and interrupts playback
*STOP DEMO Ç
– stops playback
– deactivates/activates the demonstration
mode (press and hold the button for
5 seconds)
(¢
CD:
– selects the next track
– searches forwards (press and hold the
button) within the current track
TUNER: tunes to a higher radio frequency
(press and hold the button for more than
a half second)
CLOCK or TIMER: sets the minutes
PC LINK: selects the next item
)WIRELESS PC LINK control light
lights up and blinks when PC LINK data
are transferred
¡p
3.5 mm headphone socket
Note: Connecting the headphones will switch
off the speakers.
™4
CD:
– selects the previous track
– searches backwards (press and hold the
button) within the current track
TUNER: tunes to a lower radio frequency
(press and hold the button for more than
a half second)
CLOCK or TIMER: sets the minutes
PC LINK: selects the previous item
£ALBUM/PRESET ∞BROWSE-
CD: selects the previous album on an
MP3-CD
TUNER: selects the previous preset radio
station
PC LINK: selects the previous level
CLOCK or TIMER: sets the hours
≤ALBUM/PRESET 5BROWSE+
CD: selects the next album on an
MP3-CD
TUNER: selects the next preset radio
station
PC LINK: selects the next level
CLOCK or TIMER: sets the hours
Controls and connections
13
English
MC W770/22.1 eng 7/23/04 16:07 Page 13

Warning:
Never make or change connections
with the mains supply switched on.
Speaker connections
Use the supplied speakers only. Using
other speakers can damage the set or
the sound quality will be negatively
affected.
●Connect the cable of the left speaker to L
(red and black) and the cable of the right
speaker to R (red and black) as follows:
Press the clip of the red terminal and fully
insert the stripped portion of the coloured
(or marked) speaker cable into the socket,
then release the clip.
Press the clip of the black terminal and fully
insert the stripped portion of the black (or
unmarked) speaker cable into the socket,
then release the clip.
Antenna connections
AM/MW antenna
The loop antenna supplied is for indoor use
only.
1Assemble the loop antenna as shown
below.
2Fit the plug of the loop antenna to
AM ANTENNA as shown below.
3Adjust the position of the antenna for
optimal reception (as far away as possible
from the TV,VCR or other radiation
sources).
FM antenna
The wire antenna supplied can only be used
to receive nearby stations. For better
reception we recommend using a cable
antenna system or an outdoor antenna.
1Extend the wire antenna and fit it to
FM ANTENNA as shown below.
Note: If you are using a cable antenna system
or an outdoor antenna, fit the antenna plug to
FM ANTENNA instead of the wire antenna.
2Move the antenna in different positions for
optimal reception (as far away as possible
from the TV,VCR or other radiation
sources).
3Fix the antenna’s end to the wall.
Installation
14
English
AM ANTENNA FM ANTENNA
AM ANTENNA FM ANTENNA
NTENNA FM ANTENNA
MC W770/22.1 eng 7/23/04 16:07 Page 14

Installing a PC server
See chapter Wireless PC Link “Quick
installation”.
Connecting an additional
appliance
It is possible to use an additional appliance,
e.g.TV,VCR or CD recorder with the set.
You can choose between high level input
sensitivity (e.g. for a connected TV or VCR)
and low level input sensitivity (e.g. for a
connected CD recorder).
1Insert the red plug of a cinch cable to the
red socket AUX IN R and the white plug to
the white socket AUX IN L.
2Connect the other end of the cinch cable
to the audio outputs of the additional
appliance.
3Press SOURCE on the set repeatedly until
AUX is selected.
➜AUX: the high level input sensitivity for an
additional connected appliance is
selected.
To select the low level input sensitivity press
and hold for more than 2 seconds
SOURCE on the set until AUX CDR is
selected.
➜AUX CDR: the low level input sensitivity
for an additional connected appliance is
selected.
To toggle the input sensitivity press
SOURCE again for 2 seconds on the set.
or
Press AUX on the remote control
repeatedly until the desired input sensitivity
(AUX or AUX CDR) is displayed.
Note: It is not possible to connect a turntable
directly to AUX IN L/R. If you wish to use a
turntable, you have to connect an
RIAA-amplifier to AUX IN L/R on the set.
Then connect the turntable to the
RIAA-amplifier.
Mains
The type plate is located on the rear of
the set.
1Check whether the mains voltage as shown
on the type plate corresponds to your local
mains voltage. If it does not, consult your
dealer or service organisation.
2Make sure all connections have been
made before switching on the mains
supply.
3Connect the mains cable supplied to
AC MAINS ~ and to the wall socket.This
switches on the mains supply.
00When the mains cable is connected for the
first time to the wall socket TUNER and
AUTO INSTALL - PRESS PLAY is
displayed. Press either ÉÅ on the set to
store all available radio stations
automatically (see also chapter “Storing
radio stations”) or if you do not wish to
store them now press Çon the set to
exit.
When the set is switched to standby, it is
still consuming some power. To disconnect
the set from the mains completely,
remove the mains plug from the wall
socket.
To avoid overheating of the set a safety
circuit has been built in.Therefore your
set may disconnect under extreme
conditions. If this happens, switch the
set off and let it cool down before
reusing it.
For users in the U.K.: please follow the
instructions on page 3.
Installation
15
English
MC W770/22.1 eng 7/23/04 16:07 Page 15

PC system requirements
– Windows 98SE/ME/2000/XP
–Pentium Class 350MHz processor or higher
– 128MB RAM or higher
– CD–ROM drive
– USB port
– Free hard disk space: 100 MB for the software
Quick installation
This is the recommended way to setup your MC W770 for wireless PC link operation.With
this installation all three components needed for the wireless PC link operation will be installed:
– The wireless USB adapter’s driver software
– The Philips Media Manager software with UPnP server
– The network setup of your MC W770 and your PC
We recommend using this setup for the first installation of the MC W770.
Do not connect the wireless USB adapter immediately! You will be asked during the
installation process to connect it.
If you have a Firewall installed on your PC, please switch it off during the installation.
Please close all other programs running on your PC before starting installation.
1Place the set as close as possible to the PC.
Note: In order to ensure a good wireless connection avoid placing the set close to microwave ovens
and large metal objects.
2Switch on your PC and insert the installation disc into the CD-ROM drive of your PC.
Note: Do not use the
icon, which will appear on
the PC screen.
3The installation guide will
appear automatically. If it
does not, please start the
setup_.exe programme
from the installation CD.
The installation software
starts with the language
selection and the following
window appears:
Select your desired
language and click on OK.
Wireless PC link Quick Installation
16
English
MC W770/22.1 eng 7/23/04 16:07 Page 16

4The following window
appears:
It is important not to
connect the wireless
USB adapter
immediately, but only if
the software driver for it
is installed from the
CD-ROM.You will be
asked during the
installation process to
connect it. Click on
Continue.
5The following window
appears:
Quick Installation is
preselected. Click on
Install to start the
installation.
Quick Installation Wireless PC link
17
English
MC W770/22.1 eng 7/23/04 16:07 Page 17

6The following window
appears:
The driver and utility
software of the wireless
USB adapter will be
installed first. Click on
Next to start the
installation and follow
the installation steps.
Windows may display a
warning that the driver
is not approved by
Microsoft (message
differs with Windows
version). Ignore the
message and continue
with the installation.
7The Philips Media
Manager software will
be installed next. Click
on Next and follow the
installation steps.
●After installation the
Philips Media Manager
will automatically start
up.When opening the
Philips Media Manager
for the first time, you
will be asked if you
want to add a folder
and scan for media
(music) files. Open a
drive or a folder with
music in it.This folder is
now added to the
Philips Media Manager
and you can have access
to the music files in it
from the MC W770.You
can always add more
files and folders at a later time (refer to the chapter ‘Preparation for wireless PC link playback
function’)
Wireless PC link Quick Installation
18
English
MC W770/22.1 eng 7/23/04 16:07 Page 18

8 When the message asking
for rebooting appears, click
on OK to confirm. (Keep
the installation disc
inserted.)
9The necessary software
components are
installed.The PC is ready
for setup. Plug the
wireless USB adapter
into a free USB port of
your computer. Click on
OK.
10Windows will find the
wireless USB adapter
and the Windows New
Hardware wizard pops
up:
Select the
recommended option.
Windows will find the
correct driver which
was just installed before.
Click on Next to
continue and start the
driver
installation.Windows
may display a warning
that the driver is not
approved by Microsoft
(message differs with Windows version). Ignore the message and continue with the installation.
Quick Installation Wireless PC link
19
English
MC W770/22.1 eng 7/23/04 16:07 Page 19

11The installation software
checks if the wireless
USB adapter is available.
Then the network setup
is started and following
window appears:
12 After the configuration
has been checked you
have to enter the
installation mode on
your MC W770. Press
PC LINK Aon your
MC W770 to select the
PC as source. Press
PC LINK Afor at least
5 seconds until
INSTALLING is scrolled
on the set.
➜The set searches for
a connection to the
PC.This can require
up to about a minute.
When the
connection is
established, Next is activated. Click on Next.
Wireless PC link Quick Installation
20
English
MC W770/22.1 eng 7/23/04 16:07 Page 20