Philips 109S User manual

1
E
N
Introduction
The PHILIPS 109S color monitor displays sharp and brilliant images of
text and graphics with a maximum resolution up to 1920x1440 pixels. It
is optimal for Windows, CAD / CAM / CAE, desktop publishing, spread
sheets, multi-media, and any other application which demands large
screen size and high resolutions.
This monitor automatically scans horizontal frequencies from 30KHz to
95KHz, and vertical frequencies from 50Hz to 160Hz. With
microprocessor based digital controlled circuit, the monitor can
automatically adjust itself to the video card’s scanning frequency and
displays an image with precise parameters you desire. The wide range
of scanning frequency supports variety of operating platforms, such as
IBM PC and compatibles, Apple’s Macintosh, Quadra and Centris
families, Power PC and workstations.
Feature Highlights
•On-Screen-Display function provides more informations when the
user operates the control functions. This feature provides user-
friendliness and ease-of-use when operating the monitor.
•Anti-Glare and Anti-Static screen coating eliminate any bad effects
caused by the screen surface such as reflection of the room lights
and dust attraction.
• With Color Adjustment function you can easily choose different
preset color temperatures or set your own customized color
parameters.
•ImageTilt Adjustment function provides correction of rotated image.
This correction can minimize the distortions caused by outside
environments, such as earth magnetic field.
•Green Design (option) including automatic power saving function
(NUTEK) and low emission MPRII compliance shows our commitment
in environmental care.
•Plug and Play allows communication between the monitor and PC
system for optimal video configuration via DDC1/DDC2B of VESA
standard.

2
E
N
Note: If you experienced your monitor display is changing from color to
mono, it's possible that you are using a non-VESA-DDC-standard video
card. Please consult with your local Philips dealer for more information.
ENERGY STAR is a U.S. registered mark.
As an ENERGY STAR®Partner, PHILIPS, has determined that this
product meets the ENERGY STAR®guidelines for energy effficiency.
IBM, IBM PC and Power PC are registered trademarks of International
Business Machines Corporation.
Apple, Macintosh, Quadra and Centris are registered trademarks of
Apple Computer, Inc.

3
E
N
Safety precautions and maintenance
◆Disconnect the monitor from the mains supply if the monitor is not to
be used for an extended period of time.
◆Do not attempt to remove the back cover, as you will be exposed to
a shock hazard.The back cover should only be removed by qualified
service personnel.
◆Do not place objects on top of the monitor cabinet, which could fall
into vents or which could cover them and prevent proper cooling of
the monitor’s electronic devices.
◆Do not expose the monitor to rain or excessive moisture to avoid the
risk of shock or permanent damage to the set.
◆Do not use alcohol or ammonia based liquid to clean the monitor. If
necessary, clean with a slightly damp cloth. Disconnect the monitor
from the mains supply before cleaning.
◆Consult a service technician if the monitor does not operate normally
when operating instructions of this manual are followed.
Package
Your PHILIPS 109S package includes the following items:
• The monitor (integrated with tilt / swivel pedestal)
•Power cord
• Interface cable (flying-in)
• floppy disk (Windows '95/'98 driver)
End of life disposal
Your new set contains materials which can be recycled and reused.
Specialized companies can recycle your product to increase the amount
of reusable materials and to minimize the amount of materials to be
disposed of.
Please inform yourself on local regulations on disposal of your old set.

4
E
NInstallation
Important: Please refer to the user’s manuals of your computer and
video adapter to make sure these equipments are properly installed
and configured before installing the monitor.
Positioning / Ventilation
◆Avoid exposing the monitor to direct sunlight, stoves or any other
heat sources.
◆To prevent overheating, make sure that the ventilation openings of
the monitor are not covered.
◆Keep moisture and dust away.
◆Keep away from any magnetic objects, such as speakers, electric
motors, transformers, ...etc.
◆When positioning this monitor, make sure that the mains plug and
socket are easily accessible.
Pedestal
With the built-in pedestal you can tilt and / or swivel the monitor for a
most comfortable viewing angle.
90° 90°
15°
5°
109 S

5
E
N
Connection
• Connect the monitor to the computer using the supplied interface
cables. Connection with computer system other than IBM PC may
need different type of adapters.Please consult your computer supplier
for these adapters. Connect the power cord to a wall outlet after the
interface cable is properly connected.
Important: Please make sure the AC power to your computer is
“OFF” before connecting or disconnecting any display
peripheral. Failure to do so may cause serious personal injury
as well as permanent damage to your computer equipments.
Monitor rear view
mains connection
VIDEO IN
VIDEO IN

6
E
NControl locations and functions
Front Controls
Descriptions of knobs and keypads on front control panel
➀• To adjust contrast of the display.
➁• To adjust brightness of the display.
➂• To adjust the OSD.
④ • To adjust the OSD.
➄ • To access OSD menu.
➅• To switch monitor's power ON and OFF.
1 2 435 6

7
E
N
OSD menu tree structure
First Level Second Level Third Level
SIZE & POSITION
HORIZONTAL POSITION
ZOOM
HORIZONTAL SIZE
VERTICAL POSITION
VERTICAL SIZE
SAVE & RETURN TO MAIN MENU
RECALL
GEOMETRY
COLOR TEMPERATURE
ADVANCED CONTROLS
MONITOR STATUS
USER 1
USER 2
RED (RED COLOR)
GREEN (GREEN COLOR)
BLUE (BLUE COLOR)
SAVE & RETURN TO
MAIN MENU
RECALL
9300°
6500°
POWER SAVING ON / OFF
LANGUAGES
OSD TIMER
DEGAUSS
EXIT OSD
RESET
RED (RED COLOR)
GREEN (GREEN COLOR)
BLUE (BLUE COLOR)
ROTATION
PINCUSHION
TRAPEZOID
BALANCED PINCUSHION
PARALLELOGRAM
SAVE & RETURN TO MAIN MENU
RECALL
SAVE & RETURN TO MAIN MENU
RECALL
SAVE & RETURN TO MAIN MENU
RECALL
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
5
10
25
50
PRESET MODE
NEW MODE
NO
YES
MOIRÉ H
V
SAVE & RETURN TO MAIN MENU
RECALL
SAVE & RETURN TO MAIN MENU
RECALL

8
E
NAdjustment via On-Screen-Display
Brightness / Contrast
Adjustment of brightness & contrast
●Press , then press "+" or "-"
button to adjust.
●The adjusted parameters are
automatically saved and the OSD
menu will disappear within 5
seconds if there is not any
adjustment/action has been made.
●Press , then press "+" or "-" to
adjust.
●The adjusted parameters are
automatically saved and the OSD
menu will disappear within 5
seconds if there is not any
adjustment/action has been made.
BR GH
INESST
80%
CONTRAST
80%

9
E
N
SIZE & POSITION
Adjustments of zoom, horizontal position, horizontal size, vertical
position, vertical size:
●Press , to access OSD menu.
●Press "+" or "-" button to move
the bar to "SIZE & POSITION".
●Press to access the 2nd lelel
menu. Press "+" or "-" button to
select the function you want to
adjust.
●Press , then press "+" or "-"
button to adjust.
●Press , return to 2nd level
menu.
●The adjusted parameters are
automatically saved and the OSD
menu will disappear within the
time you selected on OSD
TIMER (e.g.10 seconds) if there
is not any adjustment/action has
been made.
●Press , return to the OSD
main menu.
main menu
2nd level menu
TSIZE & POSI NIO
ZOOM AHOR I ZONT POS I T I ONL
AHOR I ZONT S I ZEL
VERTICAL S ITIONPO
VERTICAL ZESI
SAVE & RETURNTO MAIN MENU
RECALL
OSIZE & P TIONSI
GEOMETRYMCOLOR TE RATUREPE
ADVANCED NTROLSCO
EXIT OSD
RESET
7
1024x768 68 . Z
85HZ KH
DEGAUSS SMON I TOR TUSTA
AMINMENU

10
E
NSIZE & POSITION 3rd level menu
ZOOM
HORIZONTAL POSITION
HORIZONTAL SIZE
AA
AA
VERTICAL POSITION
AA
VERTICAL SIZE
A A
A
A
MZOO
80%
PHOR I ZONTAL I T I ONOS
80%
SHOR I ZONTAL EIZ
80%
SVERTICAL PO IONIT
80%
ZVERTICAL S I E
80%