Philips 140S User manual

14"TFT LCD XGA monitor
140S
Product description
•14" color LCD monitor with excellent display performance
•Analog video interface with advanced one touchAUTO
adjustment for full compatibility with standard video cards.
•Most compact design
•6.5"(165mm) depth with cable management,less than 60%
foot print of comparable CRT monitors
•TOC99,E2000,NUTEK,EPA,FCC,CE,ISO9241 and
ISO14001 Certified

LCD panel
• Type TFT LCD
• Screen size 14.1 inch / 35.8 cm diagonal
• Pixel pitch 0.279 x 0.279mm
• LCD panel type 1024 x 768 pixels,
R.G.B vertical stripe
Anti-glare polarizer,hard coated
• Effective viewing area 285.7 x 214.3mm
• Display colors 8 bits interface, 16M colors with
dithering
Scanning
• Vertical refresh rate 56~75 Hz
• Horizontal frequency 31~60 KHz
Video
• Video dot rate 80 MHz
• Input impedance
- video 75 ohm
- Sync 2K ohm
• Input signal levels 0.7 Vpp
• Sync input signal Separate sync
Composite sync
Sync on green
• Sync polarities Positive and negative
• Video interface Analog (D-Sub) input only
Optical characteristics
• Contrast ratio 200 (typ.)
• Brightness 200 cd/m2(typ.)
• White chromaticity x:0.281 y:0.311 (at 9300°K)
x:0.312 y:0.338 (at 6500°K)
• Viewing angle Upper ≥30°(typ.)
(C/R ≥5) Lower ≥55°(typ.)
Left ≥63°(typ.)
Right ≥63°(typ.)
• Response time <50 ms (typ.)
Resolution & preset modes
• Maximum 1024x768 at 75Hz
• Recommended 1024x768 at 60Hz
• 14 user definable modes
• 14 factory preset modes: H.freq (KHz)/V.freq (Hz)
640 x 350 31.5/70
720 x 400 31.5/70
640 x 480 31.5/60,35.0/67,
37.8/73,37.5/75
800 x 600 35.2/56,37.9/60,
48.0/72,46.9/75
832 x 624 49.7/75
1024 x 768 48.4/60,56.5/70,
60.0/75
(Interlace mode is not applicable)
Plug and play compatibility
• Display data channel DDC 1/2B (VESA)
• MicrosoftWindows 95/98 &Windows 2000 compatible
Technical Specifications
14"TFT LCD XGA monitor
140S
Power management
Complies with EPA Energy Star and NUTEK specifications
• Typical operation 27W
• Sleep mode 3W
Low-emission characteristics
• Complies with MPR-II andTCO‘99 specifications
Monitor controls and functions
• Front Power on/off - push button
OSD (OK) - push button
Auto - push button
Up/Down (Brightness) - push button
Left / Right - push button
• LED indicator Green power on
Amber sleep mode
Flashing Green new mode
Connections and cables
• Connections
-Video 15-pin D-sub (analog)
- DC input 6.5mm DC connector
- Power External 18V AC/DCAdapter
• Cables D-SubVideo and Power
Regulatory approvals
• TUV/GS,TUV-Ergo
• FCC-B,UL, CSA
• SEMKO
• MPR-II Low Emission
• CE Mark
• NUTEK,Energy Star
• TCO ’99
Physical specifications
• Dimension (WxHxD) 361 x 343 x 165 mm (incl.Pedestal)
• Tilt / Swivel -5°~35° / ±40°
• Weight 4.6 Kg
• Power supply 100 – 240VAC, 50/60 Hz
• Power consumption 27W* (typ.)
• Temperature (operating) +5°C to +35°C
• Temperature (storage) -20°C to +60°C
• Relative humidity 20% to 80%
• System MTBF 50K hrs (excluding LCD panel,CCFL)
We recommend using 1024 x 768 at 60Hz non-interlaced mode for the best picture quality
As an Energy Star partner,Philips has determined that this product meets the Energy Star
guidelines for energy efficiency.
Microsoft andWindows are registered trademarks of Microsoft Corporation
Macintosh is a registered trademark ofApple Computer,Inc.
* Resolution 1024 x 768,standard size,contrast max.,brightness 50%, 9300°K,
full white pattern.
All data subject to change without notice
Release date: March 2000
www.pcstuff.philips.com