Philips MSX SBC 3810 User manual

PHILIPS
PHILIPf
Mouse instruction manual
SBC 3810
4822 01 $ 50054
Mouse Muis
instruction man us/ instruktieboek
Mans
Instniktions
Souris
manual d‘instructions
Sorcio
manuafe cfistruzione
Raton
manual da instrucciones
■ 1,1 ■ ■ ■
O W

Caution
To avoid careless damage to the mouse please note
the precautions mentioned below.
1. The mouse is a very precise mechanical device,
so handle with care. Do not drop or hit it.
2. Don't use the mouse in locations subject to extreme
temperatures (either high or low), humidity, dust
and vibration.
3. Do not carry the mouse by holding the cable.
4. Be sure that you place the mouse on a dean flat
surface.
5. Do not disconnect the mouse from the computer by
simply pulling out the cable. It may cause damage
to the cable and the connector.

Technical specification
Interface: MSX standard
Sensor: optica! rotary encoder
Resolution: 30 pulse/per rotation,
0,26 mm/per pulse
Speed of encoder: 120 r.p.m.
Select switch operating force: 120 ±80 gf
Operating force mouse: 120 gf
Input/output: TTL level
Supply voltage: 5 V dq±5%
Outside dimensions: 97x64x38.5 mm (WxDxH) max.
Weight: approx. 110g fw/o cable/ connector)
Cable length: 110 cm.
PIN CONNECTIONS
CONNECTION ( 6 6 666 )
TABLE \q 000 /
VS 8 7 6J
PIN NO.
FUNCTION
1 UP
2 5
DOWN
3
LEFT
4
RIGHT
5
+5V
6
BUTTON SWITCH LEFT
7
BUTTON SWITCH RIGHT
8
STROBE
9
GROUND

Philips MSX mouse SBC 3810
Operation instructions
The mouse is used in combination with your MSX
computer and will be connected to the joystick port ,
indicated in the user manual of the related application
software package.
When sliding this mouse lightly o ver a flat surface ,
the cursor on the display/ TV. — or monitor screen
moves quickly in accordance with the motion of the
mouse.
The SBC 3810 can easily be used if a level surface is
available where the mouse can be moved about
25 cm/10 inches in all directions. Ho wever if the
mouse cannot be moved as far as desired due to space
limitation, it can be picked up and returned to the
appropriate location.
This ergonomical designed mouse with two select
switches is easy in operation by manipulating with
one hand. The program below enables you to design
graphics, which will be displayed on your TV. -
or monitor screen. In this program the mouse will be
connected to joystick port 1.
Sample MSX computer program
10 ON ERROR GOTO 20
20 DEFINTA-Z
30 OPEN "grp:" FOR OUTPUT AS #1
40 SCREEN 2:CLS
50 A$=""
60 FOR 1=1 TO 8
70 READ A:A$=A$+CHR$(A)
80 NEXT I
90 SPRIT£$(0)=A$
100 IF PAD (12)= 0 THEN 100
110 X=X+PAD(13):Y=Y+PAD{14)
120 IF X>256 THEN X=256
130 IF Y>1 92 THEN Y=192
140 IF X<0THEN X=0
150 IF Y<0THEN Y=0
160 PUT SPRITE 0, (X-4, Y-4) r 15
1 70 IF NOT STRIG{1)=-1 THEN X1=X;Y1=Y:GOTO 100
180 LINE (XI. Y1)-(X,Y):X1=X:Y1=Y
190 GOT0100
200 DATA 16,16,16,238,16,16,16, 0

left button
press for choice
of command
on menu-screen
right button
press for moving
the cursor by
sliding the mouse
over flat surface
mouse
Cleaning the mouse
In order to ensure optima! operation of this mouse ,
a periodic cleaning is necessary\ This operation is very
simple, by following the steps below.
1. Turn the mouse upside down in your hand with the
cable pointing towards you.
2. Place two fingers on the arrow symbols on either
side of the roller opening on the bottom of the
mouse.
3. Hold one handover the mouse and turn it over so
the ball drops into your hand.
4. Use a dean, soft, and dry doth to wipe the ball
dean. Never use a cleaning fluid or lint-erasing
tissue.
5. Gently blow into the mouse housing to get rid of
any dust.
6. Replace the ball in its housing, then reinsert the
detachable cover and lock it by turning from mark
"0"to "C".