Philips BT6000 User manual

BT6000
Register your product and get support at
www.philips.com/support
User manual
Portable speaker

1EN
Contents
1 Important 2
2 Your Bluetooth speaker 2
Introduction 2
What's in the box 3
Overview of the speaker 3
3 Get started 4
Power supply 4
Turn on/o 4
Adjust volume 5
4 Use Bluetooth devices 5
Connect a device 5
Play from Bluetooth device 6
Control your phone call 6
Disconnect a device 7
Reconnect a device 7
5 Listen to an external device 8
6 Specications 8
7 Troubleshooting 9
General 9
About Bluetooth device 10
8 Notice 10
Compliance 10
Care of the environment 10
Trademark notice 11

2EN
1 Important
Warning
•Never remove the casing of this speaker.
•Never place this speaker on other electrical
equipment.
•Keep this speaker away from direct
sunlight, naked ames or heat.
•Make sure that you always have easy
access to the power cord, plug, or adaptor
to disconnect the speaker from the power.
• Make sure that there is enough
free space around the speaker for
ventilation.
• After use under humid
circumstance, immediately clean
the product with a soft dry cloth.
• The battery shall not be exposed
to excessive heat such as sunshine,
re or the like.
• The adapter shall not be exposed
to dripping or splashing.
• No objects lled with liquids shall
be placed on the adapter.
• Do not place any sources of
danger on the speaker (e.g. lighted
candles).
• Use only power supplies listed in
the user manual.
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect
device, the disconnect device shall
remain readily operable.
Note
• The type plate is located on the bottom
of the speaker.
2 Your
Bluetooth
speaker
Congratulations on your purchase,
and welcome to Philips! To fully
benet from the support that Philips
oers, register your product at
www.philips.com/welcome.
Introduction
This speaker has passed splash-proof
test (IPX4) and can be used near water.
With this speaker, you can enjoy audio
from Bluetooth-enabled devices or
other external devices.

3EN
What's in the box
Check and identify the contents of your
package:
• Speaker
• USB cable for charging
• USB adapter
• Printed materials
Quick Start Guide
Overview of the speaker
3 4
2 1
5
a /PAIRING
• Enter Bluetooth pairing mode.
• After Bluetooth connection,
respond to an incoming call.
• Clear Bluetooth pairing
information.
b NFC
• Connect a NFC compatible
device through Bluetooth.
c
• Charge the built-in battery.
d AUDIO IN
• Connect an external audio
device.
e Volume knob ( )
• Turn the speaker on or o.
• Adjust volume.

4
3 Get started
Always follow the instructions in this
chapter in sequence.
Power supply
Either AC power or the built-in battery
can be used as power supply of this
product.
Option 1: AC power
Caution
•Risk of product damage! Make sure that the
power voltage corresponds to the voltage
printed on the back or underside of the
speaker.
•Risk of electric shock! When you unplug the
AC adapter, always pull the plug from the
socket. Never pull the cord.
Connect the adapter to:
• the socket on the speaker.
• the power outlet.
Option 2: Battery power
The speaker can also operate on the
built-in rechargeable battery.
Note
•Rechargeable battery has a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
•It takes approximately three hours to fully
charge the battery.
•The red LED indicator ashes when the
battery is low.
To recharge the built-in battery:
• Connect the speaker to AC power.
Battery indicator Battery status
Solid red Under charging
O Fully charged
Turn on/o
OFF
ON
EN

5
To turn the speaker on or o, rotate the
knob clockwise or anticlockwise until
you hear a click.
» When the speaker is turned on, the
blue LED indicator ashes.
» When the speaker is turned o, the
blue LED indicator lights o.
Note
•If the battery level is low, the red LED
indicator ashes.
•The speaker turns o automatically when
being idle for 15 minutes.
Adjust volume
During music playback, rotate the knob
to increase or decrease volume.
4 Use
Bluetooth
devices
With this speaker, you can listen to
audio from Bluetooth-enabled devices
and control the incoming call through
Bluetooth.
Connect a device
Note
•Make sure that Bluetooth function is
enabled on your device, and your device is
set as visible to all other Bluetooth devices.
•Any obstacle between this speaker
and a Bluetooth device can reduce the
operational range.
•Keep away from any other electronic
device that may cause interference.
•The operational range between this
speaker and a Bluetooth device is
approximately 10 meters (30 feet).
Option 1: Connect a device
through NFC
Near Field Communication (NFC) is a
technology that enables short-range
wireless communication between
various NFC compatible devices, such
as mobile phones and IC tags.
If your Bluetooth device supports NFC,
you can connect it with this speaker
easily.
1 Enable NFC on your Bluetooth
device (refer to its user manual).
2 Turn on the speaker.
» The blue LED indicator ashes.
EN

6
3 Tap the NFC tag on the top of the
speaker with the NFC area of your
Bluetooth device.
4 Follow the on-screen instructions
to complete the pairing and
connection.
» After successful connection, the
speaker beeps twice, and the
LED indicator turns solid blue.
Option 2: Connect a device
manually
1 On your Bluetooth device, enable
Bluetooth and search for Bluetooth
devices that can be paired (see the
user manual of the device).
2 Turn on the speaker.
» The blue LED indicator ashes.
3 Select [Philips BT6000] displayed
on your device for pairing. If
necessary, input “0000” as the
pairing password.
» After successful connection, the
speaker beeps twice, and the
LED indicator turns solid blue.
• If you fail to nd [Philips
BT6000] on your device
for pairing, press and hold
/PAIRING for three seconds
until you hear beep sound, and
then try again.
LED indicator
(blue)
Description
Flashing quickly Ready for pairing
Flashing slowly Connecting
the previously
connected device
Solid blue Connected
Play from Bluetooth
device
Note
•Music play pauses when there is an
incoming call, and resumes when your
phone call ends.
After successful Bluetooth connection,
play audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the speaker.
Control your phone call
After Bluetooth connection, you can
control an incoming call with this
speaker.
EN

7
Button Function
/PAIRING Press to answer an
incoming call.
Press and hold for three
seconds to reject an
incoming call.
During a call, press to end
the current call.
During a call, press and
hold for three seconds to
transfer the call to your
mobile device.
Disconnect a device
• Press and hold /PAIRING for three
seconds when there is no incoming
call;
• Disable Bluetooth on your device;
or
• Move the device beyond the
communication range.
» The speaker beeps, and the blue
LED indicator ashes.
Note
•Before connecting another Bluetooth
device, disconnect the current device rst.
Reconnect a device
• When you turn on the speaker,
it tries to reconnect the last
connected device automatically;
• If not successful, select [Philips
BT6000] on your Bluetooth menu
to start reconnection.
Clear pairing information
Press and hold /PAIRING for 8 seconds.
EN

8
5 Listen to
an external
device
With this speaker, you can also listen
to an external audio device such as an
MP3 player.
Note
•Make sure that music playback through
Bluetooth is stopped.
1 Open the protective cover on the
left of the speaker.
2 Connect an audio input cable (not
supplied) with a 3.5 mm connector
on both ends to
• the AUDIO IN socket on this
speaker, and
• the headphone socket on the
external device.
3 Play audio on the external device
(refer to its user manual).
Tip
•When you start music streaming from
a connected Bluetooth device, the
speaker switches to the Bluetooth source
automatically.
6 Specications
Note
•Product information is subject to change
without prior notice.
Rated output
power
(Amplier)
12W RMS
Acoustic
frequency
response
100-20000 Hz
Speaker driver 2 x 1.5” full range, 8 Ω
Bass
enhancement
2 x passive radiator
Bluetooth
version
V4.0
Bluetooth
supported
proles
HFP V1.5, A2DP V1.2,
AVRCP V1.4
Bluetooth
frequency band
/ Output power
2.400GHz ~
2.483GHz ISM Band /
≤4dBm (Class 2)
AUX input level 650mV RMS
Water
resistance
IPX4
Power Supply
- AC Power
(power
adapter)
Brand name:
PHILIPS;
Model: AKN2G-
0500200VU;
Input: 100-240 V~,
50/60 Hz, 0.35 A;
Output: 5 V 2 A;
- Built-in
battery
Li-ion battery
(3.7 V, 4400 mAh)
Play time in
battery mode
Approx. 8 hours
Standby Power
Consumption
< 1 W
EN