Safety
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never look into the laser beam inside this apparatus.
•Never place this apparatus on other electrical equipment.
• Keep this apparatus away from direct sunlight, naked ames or heat.
•Ensure that you always have easy access to the power cord, plug or adaptor to
disconnect the apparatus from the power.
• The device shall not exposed to dripping or splashing.
• Do no place any source of danger on the device (e.g. liquid lled objects. lit
candles).
• Make sure that there is enough free space around the product for ventilation.
• Battery usage CAUTION – To prevent battery leakage which may result in
bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, + and - as marked on the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
• Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, re or the like.
• Where the plug of the Direct Plug-in Adapter is used as the disconnect device,
the disconnect device shall remain readily operable.
• Only use attachments/accessories specied by the manufacturer.
Notice
Any changes or modications made to this device that are not expressly approved
by Philips Consumer Lifestyle may void the user’s authority to operate the
equipment.
This product complies with the radio interference requirements of the European
Community.
This product complies with the requirement of the 1999/5/EC directive.
A copy of the EC declaration of Conformity is available in the Portable Document
Format(PDF) version of the user manual at www.philips.com/support.
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that
the product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old products
with your normal household waste. Correct disposal of your old product helps to
prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC,
which cannot be disposed with normal household waste.Please inform yourself
about the local rules on separate collection of batteries because correct disposal
helps to prevent negative consequences for the environmental and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging
easy to separate into three materials: cardboard (box), polystyrene foam (buffer)
and polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if disassembled
by a specialized company. Please observe the local regulations regarding the disposal
of packaging materials, exhausted batteries and old equipment.
The making of unauthorized copies of copy-protected material, including computer
programs, les, broadcasts and sound recordings, may be an infringement of
0890
copyrights and constitute a criminal offence. This equipment should not be used for
such purposes.
Note
•The type plate is located on the back of the apparatus.
Specications
Amplier
Rated Output Power 2X2 W RMS
Signal to Noise Ratio > 67 dBA
Audio-in 600 mV RMS 20 kohm
Bluetooth
Bluetooth version V2.1+ EDR
Frequency band 2.402-2.480 GHzISM Band
Rang 10m (free space)
General information
AC Power ASUC12B-050100
Input: 100-240 V~; 50/60Hz; 0.3 A
Output: 5VDC 1000mA
Operation Power Consumption 4 W
Dimensions - Main Unit 300 x 117 x 118mm
Weight - Main Unit 1.15 kg
BEEP
All registered and unregistered trademarks
are property of their respective owners.
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
SBT300_05_Short UM_V2.0
Short user manual Short user manual
AUDIO IN
DC IN
5V 1A
1.5V AA LR 6 x 4
www.philips.com/support
2 sec.
www.philips.com/welcome
Always there to help you
SBT300/05
Register your product and get support at
Question?
Contact
Philips
Enable Bluetooth®, then select 'PHILIPS_SBT300' on your
mobile device
(if necessary, input '0000' as the paring password).
Wait until the Bluetooth®indicator turns solid
blue and the speaker beeps twice.
BluetoothON
PHILIPS_SBT300
Press Pairing for 2 seconds to enter
pairing mode.
Start music play on your
mobile device.
* Press to play / pause
(Only available in Bluetooth mode)
