Philips FWD132/94 Operating manual

Use this simple and quick way to
watch your favourite DVD movie
and enjoy your Home Cinema
experience!
OUT
IN
FWD132/94
FWD132 QUG-Eng 7/23/07, 4:39 PM1

Detailed playback features and additional functions are described in the
accompanying owner’s manual
Make sure your DVD system and TV are connected and turned on!
Playing a disc
1Ajust the source switch on front of the system to select the disc mode.
2Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).
3Press OPEN/CLOSE ?on the front of the DVD system (or remote control) and
load a disc, then press the corresponding OPEN/CLOSE ?to close the disc tray.
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face up.
4Playback will start automatically.
If a disc menu appears, use 5 /4 /A /B buttons on the remote to make the necessary
selection, then press OK to confirm. Or, use the numeric keypad on the remote to select features.
Follow the instructions given in the disc menu.
5To stop playback, press STOP 9.
Region Codes
DVDs must be labeled for ALL regions or Region 5,
in order to play on this DVD system.
You should find the below accessories in the packaging box.
Audio cables (white, red)Composite video cable
(yellow)
Batteries (2 x AA)
ALLALL
5
Remote control
WMA
FWD132 QUG-Eng 7/23/07, 4:39 PM2