Philips FWD39 Operating manual

Use this simple and quick way to
watch your favourite DVD movie
and enjoy your Home Cinema
experience!
Helpful Hints
You only need to make one video connection to your TV in
order to view the DVD playback.
If yourTV has S-Video or Component
(Pr PbY) video jacks, use one of these
video connections instead for higher
picture quality.
If yourTV has only a single Antenna In jack,
you will need an accessory RF modulator. The RF
modulator converts the video from the DVD system
so it can play through the TV’s Antenna connector.
Refer to your owner’s manual for proper
connection.
P-SCAN Do not activate the progressive scan (through
system menu) unless you have connected the DVD
system to a progressive scan TV using the
Component (Pr Pb Y) video jacks.
When listening to TV programs, press AUX button on
the remote to set the DVD system to AUX mode in order for
the sound to be heard.
FWD39
MW loop
antenna
FM wire
antenna
Speaker
(right) Speaker
(left)

Detailed playback features and additional functions are described in the
accompanying owner’s manual
Make sure your DVD system and TV are connected and turned on!
Plug & Play
1Turn on the system.
“AUTO INSTALL - PRESS PLAY” will be displayed.
2Press PLAY 2; on the system to start installation.
Playing a disc
3Press DISC1/2/3 on the remote control.
You can also select the DISC (DISC10203) on the front panel.
4Turn on theTV and select the correct Video In mode.
You should see the blue Philips DVD background screen on theTV (If no disc in the DVD system).
5Press OPEN0CLOSE 0on the front of the DVD system and load discs, then press
the corresponding OPEN0CLOSE 0again to close the disc tray.
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face
down.
6Playback will start automatically.
If a disc menu appears, use 1/¡/5/4buttons on the remote to make the necessary selection,
then press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow
the instructions given in the disc menu.
7To stop playback, press STOP 9.
Region Codes
DVDs must be labeled for ALL regions or Region 3,
in order to play on this DVD system.
ALL
ALL
3
You should find the below accessories in the packaging box.
Audio cables
(white, red)
component video
cables (red, blue,
green)
MW loop
antenna
Composite video cable
(yellow) AA size
batteries
AC power cable
FM wire antenna
AV IN
3
CD CHANGER
CLOCK
.
TIMER
VOLUME
DEMO
PLAY
MODE
RECORD
CD TAPE
PROGRAM
1
2
3
DBB
PROGRAM
SHUFFLE
FMMW
LWSW
STEREO
FRONT
BACK
RECORD
HSD
2
2
1