Philips FWM154/79 User manual

Quick start guide
Connect
Setup
Enjoy
EN
Mini Hi-Fi System
1
2
3
FWM154
Play disc
A
1Press DISC to select the disc source.
2Press OPEN/CLOSE on the front panel
to open the disc tray.
3Insert a disc with the printed side facing up,
then close the disc tray.
» Play starts automatically.
• To pause/resume play, press .
• To stop play, press .
To skip to a track, press • /.
To search within a track, press and •
hold /. Release to resume
normal play.
Enjoy
3
Program radio stations
automatically
B
1In tuner mode, press and hold
PROGRAM for 2 seconds to activate
automatic program mode.
» [AUTO] (auto) begins to blink.
» All available stations are programmed
in the order of waveband reception
strength.
D Note
You can program a maximum of 20 preset
radio stations.
»
The first programmed radio station is
broadcast automatically.
© Royal Philips Electronics N.V. 2009
All rights reserved.
Specicationsaresubjecttochangewithoutnotice.
Trademarks are the property of Koninklijke Philips
ElectronicsN.V.ortheirrespectiveowners.
Printed in China
FWM154_79_QSG_V1.0
E Tip
Detailed features and additional functions are
described in the user manual.
FWM154_QSG_79_V1.0.indd 2-3 7/31/2009 10:06:02 AM

What’sinthebox
1
2
Quick start guide
XXXXXX
Connect
Setup
2Enjoy
Eng
XXXXXXX
xxxxx
User Manual
Remote Control Quick start guideUser manual
Connect
1
Prepare the remote control
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
A
MP3 link cable
3
1
2
D Note
• Before you press any function button on the remote
control, press a source button to select source with
the remote control.
Connect Speaker
B
D Note
• Ensure that the colors of the speaker wires
and terminals are matched.
1 Connect the speaker wires to the matching
speaker terminals on the main unit.
E Tip
• See the User Manual for how to connect
other equipment to this system.
FMANT LOOP ANT
Speaker
(Right)
Speaker
(Left)
Connect
1
Setup
2
Set clock
A
1 In standby mode, press and hold CLOCK.
» The hour digits are displayed and begin
to blink.
2Press /on the remote control to set
the hours.
3Press CLOCK.
» The minute digits are displayed and
begin to blink.
4Press /to set the minutes.
5Press CLOCK to conrm the time.
Connect power
C
1Connect the power cord to the wall outlet.
C Caution
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
• Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
E Tip
• During play, you can press DISPLAY on the
remote control to view the clock.
FWM154_QSG_79_V1.0.indd 4-5 7/31/2009 10:06:02 AM