Connect
1
Setup
2
Set clock
A
1In standby mode, press and hold CLOCK.
» The hour digits are displayed and begin
to blink.
2Press / on the remote control to set
the hours.
3Press CLOCK.
» The minute digits are displayed and
begin to blink.
4Press / to set the minutes.
5Press CLOCK to confirm the time.
Connect power
C
1Connect the power cord to the wall outlet.
C Caution
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
• Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
Play disc
A
1Press DISC to select the disc source.
2Press OPEN/CLOSE on the front panel
to open the disc tray.
3Insert a disc with the printed side facing up,
then close the disc tray.
» Play starts automatically.
• To pause/resume play, press .
• To stop play, press .
To skip to a track, press• / .
To search within a track, press and•
hold / . Release to resume
normal play.
Enjoy
3
© Royal Philips Electronics N.V. 2010
All rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China FWM208_QSG_V1.0
Play from USB
B
1Connect the USB device into the socket.
2Press USB to select the USB source.
» Play starts automatically.
Program and listen to radio
stations
C
1In tuner mode, press and hold
PROGRAM for 2 seconds to activate
automatic program mode.
» [AUTO] (auto) begins to blink.
» All available stations are programmed
in the order of waveband reception
strength.
You can program a maximum of 20 preset
radio stations.
»
The first programmed radio station is
broadcast automatically.
• To pause/resume play, press .
• To stop play, press .
• To select an album, press ALBUM/
PRESET +/-.
To skip to a track, press• / .
To search within a track, press and•
hold / . Release to resume
normal play.
2Press ALBUM/PRESET +/- to select a
preset radio station.
