Philips FWM3500/37 User manual

www.philips.com/welcome
User manual
Always there to help you
Register your product and get support at
FWM3500
Question?
Contact
Philips

Contents
Register online at www.philips.com/welcome today to
get the very most from your purchase.
Visit our World Wide Web Site at http://www.philips.com/welcome
Registering your model with PHILIPS makes you eligible for all of the valuable benets listed below,so don't miss out.
Register online at www.philips.com/welcome to ensure:
*Product Safety Notication *Additional Benefits
By registering your product, you'll receive notication - directly
from the manufacturer.
Registering your product guarantees that you'll receive all of
the privileges to which you’re entitled, including special money-
saving offers.
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out.
Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to
ensure:
Return your Product Registration Card or register online at
www.philips.com/welcome today to get the very most from your purchase.
Visit our World Wide Web Site at http://www.philips.com/welcome
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS.You’ve selected one of
the best-built, best-backed products available today. We’ll do every-
thing in our power to keep you happy with your purchase for many
years to come.
As a member of the PHILIPS “family,” you’re entitled to protection
by one of the most comprehensive warranties and outstanding
service networks in the industry. What’s more, your purchase guar-
antees you’ll receive all the information and special offers for which
you qualify, plus easy access to accessories from our convenient
home shopping network.
Most importantly, you can count on our uncompromising commit-
ment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing
in a PHILIPS product.
P.S. To get the most from your PHILIPS purchase,be
sure to complete and return your Product Registration
Card at once,or register online at:
www.philips.com/welcome
For Customer Use
Enter below the Serial No.which is locat-
ed on the rear of the cabinet. Retain this
information for future reference.
Model No.__________________________
Serial No. ________________________
Know these
safetysymbols
This “bolt of lightning” indicates unin-
sulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
The “exclamation point” calls atten-
tion to features for which you should
read the enclosed literature closely to pre-
vent operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION:Pour éviter les choc élec-
triques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
*Proof of
Purchase
Returning the enclosed card guarantees
that your date of purchase will be on file,
so no additional paperwork will be
required from you to obtain warranty
service.
*Product Safety
Notification
By registering your product, you'll receive
notification - directly from the manufac-
turer - in the rare case of a product
recall or safety defect.
*Additional Benefits
Registering your product guarantees that
you'll receive all of the privileges to
which you're entitled, including special
money-saving offers.
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your condence in PHILIPS.You’ve selected one of
the best-built, best-backed products available today.We’ll do every-
thing in our power to keep you happy with your purchase for many
years to come.
As a member of the PHILIPS “family,” you’re entitled to protection
by one of the most comprehensive warranties in the industry.
What’s more, your purchase guarantees you’ll receive all the
information and special offers for which you qualify, plus easy access
to accessories from our convenient home shopping network.
Most importantly, you can count on our uncompromising commit-
ment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing
in a PHILIPS product.
P.S. To get the most from your PHILIPS purchase, be
sure to register online at:
www.philips.com/welcome

1EN
Contents
1 Important 2
Important Safety Instructions 2
Notice 3
2 Your Mini Hi-Fi System 4
Introduction 4
What's in the box 4
Overview of the main unit 5
Overview of the remote control 6
3 Get started 8
Connect FM antenna 8
Connect AM antenna 8
Connect speakers 8
Connect power 9
Connect an iPod / iPhone dock 9
Prepare the remote control 9
Auto install radio stations 10
Set clock 10
Turn on 10
4 Play 11
Play disc 11
Play from USB 11
5 Listen to an external device 12
Listen to an MP3 player 12
Listen to a PC 12
Listen to iPod/iPhone 12
6 Play options 13
Repeat and random play 13
Program tracks 13
Display play information 13
7 Adjust volume level and sound
effect 14
Adjust volume level 14
Mute sound 14
Boost loudness 14
Select a preset sound effect 14
Enhance bass 14
Virtual surround 14
Customize sound for room acoustics 14
8 Listen to radio 15
Tune to a radio station 15
Program radio stations manually 15
Select a preset radio station 15
9 USB record 16
Record to USB 16
Record CDDA contents to USB at
any playback time 16
Schedule radio-to-USB record 16
10 Other features 17
Set the alarm timer 17
Set the sleep timer 18
Karaoke 18
11 Product information 18
Specications 18
USB playability information 19
Supported MP3 disc formats 19
Maintenance 19
12 Troubleshooting 20
Contents

2EN
1 Important
Important Safety Instructions
This 'bolt of lightning' indicates uninsulated
material within the device may cause an
electrical shock. For the safety of everyone in
your household, please do not remove the
covering.
The 'exclamation mark' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING:Toreducetheriskofreorelectric
shock, the device should not be exposed to rain
ormoistureandobjectslledwithliquids,such
as vases, should not be placed on the device.
CAUTION:To prevent electric shock, fully
insert the plug.
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including ampliers) that
produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
j Only use attachments/accessories
specied by the manufacturer.
k Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m Refer all servicing to qualied service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
n Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to
the unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the unit is not
used for a long time.
• Batteries (battery pack or batteries
installed) shall not be exposed to

3EN
excessiveheatsuchassunshine,reor
the like.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
the apparatus (e.g. liquid lled objects,
lighted candles).
q This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
r Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never place this apparatus on other electrical
equipment.
•Keep this apparatus away from direct sunlight, naked
amesorheat.
•Never look into the laser beam inside this apparatus.
•Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus from
the power.
Notice for the USA
Thisequipmenthasbeentestedandfound
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residentialinstallation.Thisequipmentgenerates,
uses,andcanradiateradiofrequencyenergy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.Ifthisequipmentdoescauseharmful
interference to radio or television reception,
which can be determined by turning the
equipmentoffandon,theuserisencouraged
to try to correct the interference by one or
more of the following measures:
• Relocate the receiving antenna.
• Increase the separation between
equipmentandreceiver.
• Connecttheequipmentintoanoutleton
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
The set complies with the FCC-Rules, Part-15
and with 21 CFR 1040.10. Operation is subject
to the following two conditions:
• This device may not cause harmful
interference, and
• This device must accept any interference
received, including interference that may
cause undesired operation.
Notice for Canada
This Class B digital apparatus complies with
Canadian ICES-003.
Notice
Anychangesormodicationsmadetothis
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authoritytooperatetheequipment.
The making of unauthorized copies of copy-
protected material, including computer
programs,les,broadcastsandsound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
Thisequipmentshouldnotbeusedforsuch
purposes.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to

4EN
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
This apparatus includes this label:
Note
•The type plate is located on the back of the unit.
2 Your Mini Hi-Fi
System
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.Philips.com/welcome.
Introduction
With this unit, you can enjoy audio from discs,
USB devices, iPod/iPhone, external devices, or
radio stations.
For your convenience, you can load up to three
discs at once.
To enrich sound, this unit offers you these
sound effects:
• MAX sound for instant power boost
• Digital Sound Control (DSC)
• Dynamic Bass Boost (DBB)
• Incredible surround (IS)
• Virtual Ambience-based Control (VAC)
The unit supports the following media formats:
What's in the box
Check and identify the contents of your
package:
• Main unit x 1
• Loudspeaker box x 2
• Remote control x 1
• AAA battery X 2
• FM wire antenna x 1
• AM loop antenna x 1
• MP3 link cable x 1
• Quick start guide
• User manual
•

5EN
Overview of the main unit
a Display panel
• Show current status.
b
• Turn on the unit or switch to standby
mode.
c Source selection keys
• Select a source.
d
• Stop play or erase a program.
e VOLUME
• Adjust volume.
02'(
0,&
0,&92/
52&.323
6$0%$
0LQL+L)L6\VWHP )ZP
86%
$/%8035(6(7
$/%8035(6(7
03/,1.
0,&
86%3/$<5(&
03/,1.
3&,1
'2&.
7(&+12
',6&
781(5
02'( 86%5(&
b
a
c
d
e
g
h
f
e
j
i
i
l
k
r
q
g
f
n
o
p
m
s
f ALB/PRESET+/-
• Skip to the previous/next album.
• Select a preset radio station.
g /
• Skip to the previous/next track.
• Search within a track/ disc/USB.
• Tune to a radio station.
h MODE
• Select repeat play or random play.
i DSC
• Selectapresetsoundequalizersetting.

6EN
j MIC VOL
• Adjust microphone volume.
k Microphone port
• Jack for a microphone.
l DBB
• Turn on or off dynamic bass
enhancement.
m MP3 LINK
• Audio input jack (3.5mm ) for an
external audio device.
n MAX SOUND
• Turn on or off instant power boost for
sound.
o USB PLAY/REC
• Connect to a USB mass storage device.
p USB REC
• Record to a USB device.
q
• Start or pause play.
r
• Open or close the disc compartment.
s Disc compartment door
Overview of the remote
control
a
• Turn on the unit, or switch to standby
mode.
b Source selection keys
• Select a source.
c MODE
• Select repeat play or random play.
d CLOCK
• Set the clock.
• View the clock.
e USB RECORD
• Record to a USB device.
a
b
c
e
g
f
h
j
l
m
s
r
q
p
o
k
i
d
n
r
t
g

7EN
f
• Start or pause play.
g /
• Skip to the previous/next track.
h PROG
• Program tracks.
• Program radio stations.
i
• Stop play or erase a program.
j ALB/PRESET+/-
• Skip to the previous/next album.
• Select a preset radio station.
k MUTE
• Mute volume.
l MAX
• Turn on or off instant power boost for
sound.
m DSC
• Selectapresetsoundequalizer.
n VAC
• Selectanambience-basedequalizer
setting.
o DBB/IS
• Turn on or off dynamic bass
enhancement.
• Turn on or off incredible surround.
p VOL +/-
• Adjust volume.
q DISPLAY
• Select display information.
r /
• Adjustradiofrequency.
• Fast backward or fast forward.
s USB DELETE
• DeleteaudiolesstoredonaUSB
storage device.
t SLEEP/TIMER
• Set the sleep timer.
• Set the alarm timer.
• Turn on or off sleep/alarm timer.

8EN
3 Get started
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect FM antenna
Connect the supplied FM antenna to the FM
jack on the back of the main unit.
Connect AM antenna
1 Assemble the AM loop antenna.
2 Connect the AM loop antenna to the AM
jack on the back of the main unit.
Connect speakers
Note
•For optimal sound, use the supplied speakers only.
•Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specicationssectionofthismanual.
Note
•Make sure that the colors of the speaker wires and
terminals are matched.
Insert the wire completely.
• Insert the right speaker wires to "R",
and left speaker wires to "L".
$17(11$
)0
$0
'2&.
63($.(56
*
3&,1$8;
5/

9EN
Connect power
Caution
•Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back of the unit.
•Before connecting to the AC power, make sure that you
have completed all other connections.
• Connect the AC power plug to the power
outlet.
Connect an iPod / iPhone
dock
$17(11$
)0
$0
'2&.
63($.(56
3&,1$8;
5/
$17(11$
)0
$0
'2&.
63($.(56
3&,1$8;
5/
DOCKING
With the connected iPod / iPhone dock, you
can charge or listen to music from your iPod /
iPhone through this unit.
• Connect a dock (not supplied) to the
DOCK socket on this unit.
Tip
•TolistentomusicfromthedockediPod/iPhone,rst
press DOCK to select the dock source.
Prepare the remote control
Note
•Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
•Danger of explosion if battery is incorrectly replaced.
Replaceonlywiththesameorequivalenttype.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert two AAA batteries (not supplied)
with correct polarity (+/-) as indicated.
3 Close the battery compartment.
Note
•If you are not going to use the remote control for a
long time, remove the batteries.
•Do not use old and new or different types of batteries
in combination.
•Batteries contain chemical substances, so they should
be disposed of properly.

10 EN
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1 Connect the unit to the power supply.
» [AUTO INSTALL - PRESS PLAY] (auto
install - press the PLAY button) is
displayed.
2 Press on the main unit to start
installation.
» [AUTO] (auto) is displayed.
» The unit automatically stores radio
stationswithsufcientsignalstrength.
» When all the available radio stations
arestored,therstpresetradiostation
is broadcast automatically.
Set clock
1 In the standby mode, press CLOCK to
activate the clock setting mode.
» The 12 hour or 24 hour format is
displayed.
2 Press ALB/PRESET+/- repeatedly to select
12 hour or 24 hour format.
3 Press CLOCKtoconrm.
» The clock digits are displayed and
begin to blink.
4 Press ALB/PRESET+/- to set the hour.
5 Press / to set the minute.
6 Press CLOCKtoconrm.
Tip
•To view the clock during play, press CLOCK.
Turn on
Press .
» The unit switches to the last selected
source.
Switch to standby
Press to switch the unit to standby mode.
» The backlight on the display panel
turns off.
» The clock (if set) appears on the
display panel.

11EN
4 Play
Play disc
1 Press CD to select the disc source.
2 Press on the main unit to open the disc
compartment.
3 Load a disc on the disc tray, with the
printed side facing up.
4 Press on the main unit to close the disc
compartment.
» Play starts automatically.
• To pause/resume play, press .
• To stop play, press .
• To select another track, press / .
• To select an album, press ALB/
PRESET+/-.
• To search within a track, press and
hold / , then release to resume
normal play.
Play from USB
52&.
6$0%$
HP )ZP
',63/$<
$/%8035(6(7
03/,1.
86%3/$<5(&
03/,1.
3&,1
'2&.
86%3/$<5(&
Note
•Ensure that the USB device contains playable audio
contents for supported formats.
1 Plug the USB device into the USB PLAY/
REC socket of this unit.
2 Press USB to select the USB source.
3 Press ALB/PRESET+/- to select a folder.
4 Press / toselectanaudiole.
5 If the USB device doesn't play, press .
• To pause/resume play, press .
• To stop play, press .
• Tosearchwithinanaudiole,press
and hold / , then release to
resume normal play.

12 EN
5 Listen to an
external device
You can listen to an external audio device
through the speakers of this unit.
Listen to an MP3 player
1 Press MP3 LINK to select the MP3 source.
2 Connect the supplied MP3 link cable to:
• the MP3 LINK jack (3.5mm) on the
unit.
• the headphone jack on the MP3 player.
3 Start to play the device (refer to the
device user manual).
Listen to a PC
You can connect a PC or other audio devices.
1 Press PC IN/DOCK repeatedly to select
the PC (Aux) source.
2 Connect the audio cables (white/red, not
supplied) to:
• the PC IN jacks (white/red) on the
unit.
• the headphone jack on the PC, or
AUDIO OUT jacks on an external
device.
3 Start to play the device (refer to the
device user manual).
Listen to iPod/iPhone
1 Press PC IN/DOCK repeatedly to select
the dock source.
2 Connect a Philips branded dock (modeled:
DCK3060, sold separately) to the DOCK
jack on the back of this unit.
• Then dock your iPod or iPhone onto
the dock.
3 Start to play the device (refer to the iPod/
iPhone user manual).
63($.(56

68%:22)(5

$17(11$
)0
$0
'2&.
/(' 

/('
/('
/('
DOCKING

13EN
6 Play options
Repeat and random play
1 Press MODE repeatedly to select:
• : the current track is played
repeatedly.
• : all tracks are played repeatedly.
• : all tracks are played
randomly and repeatedly.
• : all tracks are played randomly.
2 To return to normal play, press MODE
repeatedly until play mode is no longer
displayed.
Tip
•Shufeplaycannotbeselectedwhenyouplay
programmed tracks.
Program tracks
You can program a maximum of 40 tracks.
1 At CD/USB mode, in the stop position,
press PROG to activate the program
mode.
» [PROG] (program) is displayed.
2 For MP3 tracks, press ALB/PRESET+/- to
select an album.
3 Press / to select a track number, then
press PROGtoconrm.
4 Repeat steps 2 to 3 to select and store all
tracks to program.
5 Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
• To erase the program, in the stop
position, press .
Display play information
During play, press DISPLAY repeatedly to select
different play information.

14 EN
7 Adjust volume
level and sound
effect
Note
•MAX sound and DSC (Digital Sound Control) cannot
be activated at the same time.
Adjust volume level
Caution
•For your hearing health and being consideration of
other people, it is not recommended to listen at high
volume levels for a long time.
During play, press VOL +/- to increase/decrease
the volume level.
Mute sound
During play, press MUTE to mute/unmute
sound.
Boost loudness
MAX gives an instant boost to the sound
power .
Press MAX to turn on or off the instant power
boost.
» If MAX sound is activated, MAX is
displayed.
Select a preset sound effect
The DSC (Digital Sound Control) enables you
to enjoy special sound effects.
During play, press DSC repeatedly to select:
• [ROCK] (rock)
• [SAMBA] (samba)
• [JAZZ] (jazz)
• [POP] (pop)
• [TECHNO] (techno)
Enhance bass
The best DBB (Dynamic Bass Enhancement)
setting is generated automatically for each
DSC selection.You can manually select the
DBB setting that best suits your listening
environment.
During play, press DBB repeatedly to select:
• DBB 1
• DBB 2
• DBB 3
• DBB off
» If DBB is activated, DBB is displayed.
Virtual surround
You can enhance audio with a virtual surround
sound effect.
Press and hold DBB/IS to turn on or off the
incredible surround.
» If the incredible surround is activated,
[INC SURR] (incredible surround) is
displayed.
Customize sound for room
acoustics
During play, press VAC repeatedly to select a
type of listening environment:
• [HALL] (hall)
• [CONCERT] (concert)
• [CINEMA] (cinema)

15EN
8 Listen to radio
Tune to a radio station
1 Press TUNER repeatedly to select FM or
AM.
2 Press and hold / for more than 2
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
• To tune to a weak station, press /
repeatedlyuntilyoundoptimal
reception.
Program radio stations
manually
You can program a maximum of 40 (FM+AM)
preset radio stations.
1 Tune to a radio station.
2 Press PROG to activate program mode.
» [PROG] (program) is displayed.
3 Press ALB/PRESET+/- to allocate a
number to this radio station, then press
PROGtoconrm.
4 Repeat the above steps to program other
stations.
Tip
•To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press ALB/PRESET+/- to select
a preset number.
Tip
•Position the antenna as far as possible from TV,VCR or
other radiation source.
•For optimal reception, fully extend and adjust the
position of the antenna.

16 EN
9 USB record
AudioCDtracks,MP3les,radioandaudio
from external devices are recorded in .mp3
format.
ThersttimeyourecordtoUSB,afolder
called 'PHILIPS' is automatically created in the
USB device. Each time you record to USB,
therecordedlesarestoredinasub-folderin
the 'PHILIPS' folder. Files and sub-folders are
named numerically in the order in which they
are created.
Record to USB
1 Plug the USB device into the USB PLAY/
REC socket of this unit.
2 Prepare the source to record from.
• Disc - Select the disc source and load a
disc.You can select a track from which
a recording starts.
• Radio - Tune to a radio station.
• MP3 LINK/PC IN - Select the MP3 link/
PC IN source, then connect and start
to play an external device.
3 Press USB RECORD to start recording.
• For discs, press USB RECORD
repeatedly to select:
A [RECONE](recordone):therst/
current track is recorded.
B [REC ALL] (record all): all tracks/the
remaining tracks are recorded.
» Disc play starts automatically from the
beginning of the disc/the selected track,
and the recording starts.
• To stop recording, press .
Note
•If the USB device does not have enough memory to
storetheaudioles,amessageaboutafullmemoryis
displayed.
Record CDDA contents to
USB at any playback time
Note
•Make sure that the USB storage device is connected to
the main unit.
To record the CDDA content into a USB
storage device at any playback time:
1 Press USB RECORD during CDDA
playback.
» The recording starts.
2 Press to stop recording.
Tip
•If the USB storage device does not have enough
memorytostoretheaudioles,amessageaboutafull
memory is displayed.
•Anytime recording is not available for CD-MP3 discs.
•Anytime recording is not available for High speed
recording.
Schedule radio-to-USB
record
Schedule radio recordings in advance and you
can listen to your favorite programs at your
convenience.
Note
•A recording is activated only in the standby mode.
•The maximum length of a recording is 12 hours.
1 Ensure that you set the clock correctly.
2 Plug the USB device into the USB PLAY/
REC socket of this unit.
3 Tune to a radio station.
4 Press to switch to standby mode.

17EN
5 Press and hold SLEEP/TIMER for more
than 2 seconds.
» A prompt to select the source is
displayed.
6 Press TUNER repeatedly to select FM or
AM.
7 Press USB RECORD.
» The start timer digits are displayed and
begin to blink.
8 Press ALB/PRESET+/- to set the hour.
9 Press / to set the minute.
10 Press SLEEP/TIMERtoconrm.
» The end timer digits are displayed and
begin to blink.
11 Press ALB/PRESET+/- to set the hour.
12 Press / to set the minute.
13 Press SLEEP/TIMERtoconrm.
» is displayed.
» At the scheduled times, the recording
begins and ends automatically.
» When the recording ends, the unit
switches to standby mode.
To deactivate or re-activate a record timer
1 In the standby mode, press SLEEP/TIMER
repeatedly.
» If the timer is activated, is displayed.
» If the timer is deactivated,
disappears.
10 Other features
Set the alarm timer
This unit can be used as an alarm clock.The
disc, radio or USB is activated to play at a
preset time.
Note
•If you have set a record timer and an alarm timer, only
the latest timer is activated.
1 Ensure that you have set the clock
correctly.
2 Press to switch to standby mode.
3 Press and hold SLEEP/TIMER for more
than 2 seconds.
» A prompt to select the source is
displayed.
4 Press CD, or TUNER or USB to select a
source.
5 Press SLEEP/TIMERtoconrm.
» The clock digits are displayed and
begin to blink.
6 Press ALB/PRESET+/- to set the hour.
7 Press / to set the minute.
8 Press SLEEP/TIMERtoconrm.
» The timer is set and activated.
To deactivate or re-activate an alarm timer
1 In the standby mode, press SLEEP/TIMER
repeatedly.
» If the timer is activated, is displayed.
» If the timer is deactivated,
disappears.

18 EN
Tip
•In MP3 link or AUX mode, the alarm timer cannot be
set.
•IfdiscorUSBsourceisselectedbutnoaudiolecan
be played, radio is activated automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1 When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period of
time (in minutes).
» When sleep timer is activated, is
displayed.
To deactivate sleep timer
1 Press SLEEP/TIMER repeatedly until [OFF]
(off) is displayed.
» When sleep timer is deactivated,
disappears on the display.
Karaoke
You can connect a microphone and sing along
with a music source.
1 Turn MIC VOL to the minimum level.
2 Connect a microphone to the microphone
port on the unit.
3 Press CD, or TUNER, or USB, or MP3
LINK, or PC IN/DOCK to select the
source, and start play.
4 Sing through the microphone.
• To adjust the volume of the source,
press VOL +/-.
• To adjust the volume of the
microphone, turn MIC VOL.
11 Product
information
Note
•Product information is subject to change without prior
notice.
Specications
Amplier
Total output power 4 X 75W RMS
Frequencyresponse 60 Hz - 16kHz
Signal-to- noise ratio >65 dBA
Aux input 500mV/600mV
Disc
Laser type Semiconductor
Disc diameter 12cm/8cm
Support disc CD-DA, CD-R, CD-
RW, MP3-CD
Audio DAC 24Bits / 44.1kHz
Total harmonic
distortion
<1%
Frequencyresponse 60Hz -16kHz
(44.1kHz)
S/N ratio >70dBA
Tuner
Tuning range FM: 87.5 - 108MHz;
AM: 530 - 1700KHz
(10KHz)
Tuning grid 100KHz (FM); 10KHz (AM)
Number of
presets
40 (FM + AM)
FM 75ohm wire