Philips FWM372/05 User manual

y
CD1/2/3 MUTE
REPEAT PROGRAM SHUFFLE
DSC DBB
DISPLAY DIM SLEEP
TITLE
ALBUM
AUX
TUNER
VOL
TIMER
ON/OFF
1
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
2
User Manual
FM antenna MW antenna Remote Control
Quick Start Guide
Quick start guide
User manual
FWM372
FWM572
FWM372-572 QUG_Eng 2006.3.14, 16:261

Setting the clock
1
2
3
4
In standby or view clock mode, press CLOCK•TIMER once. In other
source mode, press CLOCK•TIMER twice.
Press PROGRAM repeatedly to select clock mode.
Press àor árepeatedly to set the hour.
Press íor ërepeatedly to set the minute.
Press CLOCK•TIMER again to store the setting.
1
2
3
Connect the speaker cables.
Connect the MW and FM antennas.
Connect the power cable of the system.
Tip
See the User Manual for how to
connect other equipment to this
system.
IMPORTANT!
– To set clock in the Eco Power mode, press and hold STANDBY-ON/ECO
POWER 2 on the set for 3 seconds or more to switch to normal standby mode
first before proceeding with the procedures below.
SPEAKERS 6Ω
R
+
–
L
–
+
AM ANTENNA

LR
MW loop
antenna
AUX/
CDR
IN
AC
MAINS
AC power cord
FM AERIAL
75W
FM wire antenna
5
FWM372-572 QUG_Eng 2006.3.14, 16:262

Enjoy
C
Playing a disc
1
2
3
4
Press OPEN•CLOSE to open the disc tray and load up to two
discs on the individual disc trays.To load the third disc, press DISC
CHANGE.
➜Make sure the label side of each loaded disc is facing up.
Press OPEN•CLOSE again to close the disc tray.
Use DSC 1/2/3 (or CD 1/2/3 on the remote control) to select a
disc for playback and then press ÉÅ to start playback.
To stop playback, press STOP9.
2
2
1
1
Programming and tuning to
radio stations
1
2
3
Press TUNER to select the tuner source.
Press PROGRAM for more than two seconds to program all
available stations in order of waveband.
Press íor ëuntil the desired preset station is displayed.
FWM372-572 QUG_Eng 2006.3.14, 16:263

Enjoy
C
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press CD/USB once or more to select USB (or USB DIRECT on the remote control).
Play the USB’s audio files as you do with the albums/tracks on a CD,
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
2005 CKoninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com
PDCC-JS/JW-0611 GB
FWM372-572 QUG_Eng 2006.3.14, 16:264