Philips FWM582/BK User manual

T
I
T
L
E
T
I
T
L
E
1
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
2
User Manual
FM antenna MW antenna Remote Control
Quick Start Guide
Quick start guide
User manual
FWM582
FWM582 QSG_Eng 5/21/07, 2:55 PM1

SetupSetup
Setting the clock
1
2
3
4
In standby or view clock mode, press CLOCK•TIMER once. In other
source mode, press CLOCK•TIMER twice.
Press àor árepeatedly to set the hour.
Press íor ërepeatedly to set the minute.
Press CLOCK•TIMER again to store the setting.
1
2
3
Connect the speaker cables.
Connect the MW and FM antennas.
Connect the power cable of the system.
Tip
See the User Manual for how to
connect other equipment to this
system.
MW
6
FWM582 QSG_Eng 5/21/07, 2:55 PM2

Enjoy
C
Playing a disc
1
2
3
4
Press OPEN•CLOSE to open the disc tray and load up to two
discs on the individual disc trays.To load the third disc, press DISC
CHANGE.
➜Make sure the label side of each loaded disc is facing up.
Press OPEN•CLOSE again to close the disc tray.
Use DSC 1/2/3 (or CD 1/2/3 on the remote control) to select a
disc for playback and then press ÉÅ to start playback.
To stop playback, press STOP9.
2
2
1
1
Programming and tuning to
radio stations
1
2
3
Press TUNER to select the tuner source.
Press PROGRAM for more than two seconds to program all
available stations in order of waveband.
Press íor ëuntil the desired preset station is displayed.
FWM582 QSG_Eng 5/21/07, 2:55 PM3

PDCC-JS/JW-0716
Enjoy
C
1
2
3
Insert the USB device’s USB plug into the USB DIRECT socket on the set.
Press USB to select the USB source.
Play the USB’s audio files as you do with the albums/tracks on a CD.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
CRoyal Philips Electronics N.V. 2007
All rights reserved.
http://www.philips.com
Ripping function
1
2
3
4
Insert a USB device with sufficient free space to the USB DIRECT socket on the set.
Prepare the source to record from.
Press USB RECORD to start ripping.
At any moment, simply press STOP9to stop ripping.
FWM582 QSG_Eng 5/21/07, 2:55 PM4