Philips FWM663X/78 User manual

Register your product and get support at
www.philips.com/welcome
EN User manual
FWM663

Virtual surround 48
Customize sound for room acoustics 49
8 Listen to radio 49
Tune to a radio station 49
Program radio stations automatically 49
Program radio stations manually 50
Select a preset radio station 50
9 USB/SD record 50
Record to a USB/SD device 50
Record CDDA contents to USB/SD
device with high speed 51
Record CDDA contents to a
USB/SD device at any playback time 51
Schedule radio-to-USB/SD record 51
10 Other features 52
Set the alarm timer 52
Set the sleep timer 53
Listen to an external device 53
Delete from a USB/SD device 53
Copy files between SD and USB device 53
Karaoke 54
11 Product information 54
Specifications 54
USB playability information 55
Supported MP3 disc formats 56
Maintenance 56
Content
1 Important 36
Safety 36
Notice 37
2 Your Mini Hi-Fi System 38
Introduction 38
What’s in the box 38
Overview of the main unit 39
Overview of the remote control 41
3 Connect 42
Connect FM antenna 42
Connect AM antenna 42
Connect speakers 43
Connect power 43
4 Get started 44
Prepare the remote control 44
Auto install radio stations 44
Set clock 44
Turn on 45
5 Play 45
Play disc 45
Play from a USB device 46
Play from an SD card 46
Play from an external device 47
6 Play options 47
Repeat and random play 47
Program tracks 47
Display play information 47
7 Adjust volume level and sound
effect 48
Adjust volume level 48
Mute sound 48
Boost loudness 48
Select a preset sound effect 48
Enhance bass 48
English
35EN

36
lUnplug this apparatus during lightning
storms or when unused for long periods
of time.
mRefer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
nBattery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
Install all batteries correctly, + and -•
as marked on the unit.
Do not mix batteries (old and new•
or carbon and alkaline, etc.).
Remove batteries when the unit is•
not used for a long time.
oApparatus shall not be exposed to
dripping or splashing.
pDo not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
qThis product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
rWhere the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
1 Important
Safety
aRead these instructions.
bKeep these instructions.
cHeed all warnings.
dFollow all instructions.
eDo not use this apparatus near water.
fClean only with dry cloth.
gDo not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
hDo not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
iProtect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
jOnly use attachments/accessories
specified by the manufacturer.
kUse only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
EN

37
packaging materials, exhausted batteries and
old equipment.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This apparatus includes this label:
Warning
Never remove the casing of this apparatus.•
Never lubricate any part of this apparatus.•
Never place this apparatus on other electrical•
equipment.
Keep this apparatus away from direct sunlight,
•
naked flames or heat.
Never look into the laser beam inside this
•
apparatus.
Ensure that you always have easy access to the
•
power cord, plug or adaptor to disconnect this
apparatus from the power.
Caution
Use of controls or adjustments or•
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Notice
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
English
EN

38
What’s in the box
Check and identify the contents of your
package:
Main unit x 1•
AC power cable x 1•
Front speakers x 2•
Subwoofer x 1•
Remote control with 2 AAA batteries•
FM wire antenna x 1•
AM loop antenna x 1•
MP3 link cable x 1•
Quick start guide x 1•
User manual x 1•
2 Your Mini Hi-Fi
System
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
at www.Philips.com/welcome.
Introduction
With this unit, you can enjoy audio from discs,
USB devices, iPod players, external devices, or
radio stations.
For your convenience, you can load up to three
discs at once.
To enrich sound, this unit offers you these
sound effects:
MAX sound for instant power boost•
Digital Sound Control (DSC)•
Dynamic Bass Boost (DBB)•
Incredible surround (IS)•
Virtual Ambience-based Control (VAC)•
The unit supports the following media formats:
EN

39
dSource selection keys
Select a source.•
eUSB RECORD
Record to a USB device.•
fUSB to SD
Copy audio files from a USB device•
to an SD card.
Overview of the main unit
a
b
d
c
e
f
g
h
j
k
k
i
l
n
m
m
p
q
p
q
o
x
w
u
s
t
v
r
z
{
|
}

€

~
y
a
Turn on the unit or switch to•
standby mode.
bDISPLAY
Select display information.•
cMODE
Select repeat play or random play.•
English
EN

40
v
Start or pause play.•
wMAX SOUND
Turn on or off instant power boost•
for sound.
xVAC
Select an ambiance-based equalizer•
setting.
yIS
Turn on or off incredible surround.•
zDBB
Turn on or off dynamic bass•
enhancement.
{SD DELETE
Delete audio files stored on an SD•
device.
|SD RECORD
Record to an SD card.•
}SD to USB
Copy audio files from an SD card to•
a USB device.
~PROG
Program tracks.•
Program radio stations.•
CLOCK
Set the clock/View the clock.•
€LIGHT
Turn on or off the lighting effect.•
Display panel
Show status.•
gUSB DELETE
Delete audio files stored on a USB•
device.
hVOLUME
Adjust volume.•
iDSC
Select a preset sound equalizer•
setting.
jDISC 1/2/3
Select a disc.•
k/
Skip to the previous/next track.•
Search within a track/disc/USB/SD•
device/DOCK.
Tune to a radio station.•
Adjust time.•
l
Stop play or erase a program.•
mALBUM/PRESET+/-
Skip to the previous/next album.•
Select a preset radio station.•
Adjust time.•
Select 12 hour or 24 hour format.•
nOPEN/CLOSE
Open or close the disc•
compartment.
oDisc compartment door
pMIC VOL
Adjust microphone volume.•
qMicrophone port
Jack for a microphone.•
r
Jack for a USB mass storage device.•
sMP3 LINK
Audio input jack (3.5mm) for an•
external audio device.
tSD card slot
uDISC CHANGE
Change a disc.•
EN

41
a
Turn on the unit or switch to•
standby mode.
bSource selection keys
Select a source.•
cSLEEP
Set the sleep timer.•
dMODE
Select repeat play or random play.•
eUSB DELETE
Delete audio files stored on a USB•
device.
fMUTE
Mute volume.•
gUSB RECORD
Record to a USB device.•
h
Start or pause play.•
i/
Skip to the previous/next track.•
jUSB to SD
Copy audio files from a USB device•
to an SD card.
kALBUM/PRESET+/-
Skip to the previous/next album.•
Select a preset radio station.•
Adjust time.•
Select 12 hour or 24 hour format.•
lNumeric keypad
Select a track from a disc directly.•
mPROG
Program tracks.•
Program radio stations.•
nMAX SOUND
Turn on or off instant power boost•
for sound.
oDSC
Select a preset sound equalizer•
setting.
Overview of the remote
control
u
x
y
{
z
w
v
v
English
EN

42
3 Connect
Connect FM antenna
1Connect the supplied FM antenna to the
FM jack on the back of the main unit.
Connect AM antenna
1Assemble the AM loop antenna.
2Connect the AM loop antenna to the AM
jack on the back of the main unit.
AM
pDBB
Turn on or off dynamic bass•
enhancement.
qVAC/IS
Select an ambiance-based equalizer•
setting.
Turn on or off incredible surround.•
rDISPLAY
Select display information.•
sVOL +/-
Adjust volume.•
t
Stop play or erase a program.•
uSD to USB
Copy audio files from an SD card to•
a USB device.
v/
Skip to the previous/next track.•
Search within a track/disc/USB/SD•
device/DOCK.
Tune to a radio station.•
Adjust time.•
wSD RECORD
Record to an SD card.•
xCLOCK
Set the clock/View the clock.•
ySD DELETE
Delete audio files stored on an SD•
device.
zLIGHT
Turn on or off the lighting effect.•
{TIMER
Set the alarm timer.•
EN

43
Connect power
Caution
Risk of product damage! Ensure that the•
power supply voltage corresponds to the
voltage set on the voltage selector on the back
of the unit.
Ensure that the power supply socket used can
•
support at least 10A current loading.
Before connecting the AC power cord, ensure
•
that you have completed all other connections.
Note
The type plate is located on the back of the•
main unit.
1Connect the AC power cable to:
the main unit.•
the wall socket.•
Connect speakers
Note
For optimal sound, use the supplied speakers•
only.
Connect only speakers with impedance that is
•
the same or higher than the supplied speakers.
Refer to the Specifications section of this
manual.
A: Speakers; B: Subwoofer
Connect the speakers
1Find “SPEAKERS” sockets on the main
unit.
2Insert the black connector of the right
speaker wire to “R”, and the black
connector of the left speaker wire to “L”.
Connect the subwoofer
3Insert the blue connector of the
subwoofer wire to “SUB WOOFER”
socket.
AA
B
English
EN

44
Note
If you are not going to use the remote control•
for a long time, remove the batteries.
Do not use old and new or different types of
•
batteries in combination.
Batteries contain chemical substances, so they
•
should be disposed of properly.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1Connect the unit to the power supply.
[AUTO INSTALL - PRESS PLAY] (auto»
install - press the PLAY button) is
displayed.
2Press on the main unit to start
installation.
[AUTO] (auto) is displayed.»
The unit automatically stores radio»
stations with sufficient signal strength.
When all the available radio stations»
are stored, the first preset radio station
is broadcast automatically.
Set clock
1In the standby mode, press CLOCK to
activate the clock setting mode.
The 12 hour or 24 hour format is»
displayed.
2Press ALBUM/PRESET+/- repeatedly to
select 12 hour or 24 hour format.
3Press CLOCK to confirm.
The clock digits are displayed and»
begin to blink.
4PressALBUM/PRESET+/- to set the hour.
5Press / to set the minute.
6Press CLOCK to confirm.
4 Get started
Caution
Use of controls or adjustments or•
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Note
Risk of explosion! Keep batteries away from•
heat, sunshine or fire. Never discard batteries
in fire.
To replace the remote control battery:
1Open the battery compartment.
2Insert two AAA batteries with correct
polarity (+/-) as indicated.
3Close the battery compartment.
3
1
2
EN

45
5 Play
Play disc
1Press CD 1/2/3 to select the disc source.
2Press OPEN/CLOSE on the main unit to
open the disc compartment.
3Load up to two discs on the disc trays,
with the printed side facing up.
To load the third disc, press• DISC
CHANGE on the main unit to rotate
to the disc tray.
4Press OPEN/CLOSE on the main unit to
close the disc compartment.
Play starts automatically.»
To select a disc, press• DISC 1/2/3.
To pause/resume play, press• .
To stop play, press• .
To select another track, press• /
or press a numeric button.
To select an album, press• ALBUM/
PRESET+/-.
To search within a track, press and•
hold / , and then release to
resume normal play.
2
2
1
1
Tip
To view the clock during play, press• CLOCK.
Turn on
1Press .
The unit switches to the last selected»
source.
Switch to standby
1Press to switch the unit to standby
mode.
The backlight on the display panel»
turns off.
The clock (if set) appears on the»
display panel.
English
EN

46
Play from an SD card
Note
• Ensure that the SD card contains playable
audio contents for supported formats. (see
‘USB playability information’ on page 29)
1Insert the SD card into the SD card slot.
2Press USB/SD to select the SD source.
3Press ALBUM/PRESET+/- to select a
folder.
4Press /to select an audio file.
5Press to start play.
To pause/resume play, press• .
To stop play, press• .
To search within an audio file, press•
and hold / , then release to
resume normal play.
Play from a USB device
Note
• Ensure that the USB device contains playable
audio contents for supported formats. (see
‘USB playability information’ on page 29)
1Insert the USB plug of the device into the
socket.
2Press USB/SD to select the USB source.
3Press ALBUM/PRESET+/- to select a
folder.
4Press /to select an audio file.
5Press to start play.
To pause/resume play, press• .
To stop play, press• .
To search within an audio file, press•
and hold / , then release to
resume normal play.
•
EN

47
6 Play options
Repeat and random play
1Press MODE repeatedly to select:
• : the current track is played repeatedly.
• : all tracks are played repeatedly.
• : all tracks are played
randomly and repeatedly.
• : all tracks are played randomly.
2To return to normal play, press MODE
repeatedly until play mode is no longer
displayed.
Tip
Shuffle play cannot be selected when you play•
programmed tracks.
Program tracks
You can program a maximum of 40 tracks.
1At CD/USB mode, in the stop position,
press PROG to activate the program mode.
[PROG] (program) is displayed.»
2For MP3/WMA tracks, press ALBUM/
PRESET+/- to select an album.
3Press / to select a track number, and
then press PROG to confirm.
4Repeat steps 2 and 3 to select and store
all tracks to program.
5Press to play the programmed tracks.
During play, [PROG] (program) is»
displayed.
To erase the program, in the stop•
position, press .
Display play information
1During play, press DISPLAY repeatedly to
select different play information.
Play from an external device
You can also listen to an external audio device
through this unit.
1Press MP3-LINK to select the MP3 link
source.
2Connect the supplied MP3 link cable to:
the• MP3 LINK jack (3.5mm) on the
unit.
the headphone jack on an external•
device.
3Start to play the device (see the device
user manual).
English
EN

48
Select a preset sound effect
The DSC (Digital Sound Control) enables you
to enjoy special sound effects.
1During play, press DSC repeatedly to
select:
[JAZZ] (jazz)•
[POP] (pop)•
[TECHNO] (techno)•
[OPTIMAL] (optimal)•
Enhance bass
The best DBB (Dynamic Bass Enhancement)
setting is generated automatically for each
DSC selection.You can manually select the
DBB setting that best suits your listening
environment.
1During play, press DBB repeatedly to
select:
DBB 1•
DBB 2•
DBB 3•
DBB off•
If DBB is activated,»DBB is displayed.
Virtual surround
You can enhance audio with a virtual surround
sound effect.
1Press and hold VAC/IS to turn on or off
the incredible surround.
On the main unit, press• IS.
If the incredible surround is activated,»
[INC SURR] (incredible surround) is
displayed.
7 Adjust volume
level and sound
effect
Note
MAX sound and DSC (Digital Sound Control)•
cannot be activated at the same time.
Adjust volume level
Caution
For your hearing health and being•
consideration of other people, it is not
recommended to listen at high volume levels
for a long time.
1During play, press VOL +/- to increase/
decrease the volume level.
Mute sound
1During play, press MUTE to mute/unmute
sound.
Boost loudness
MAX gives an instant boost to the sound
power .
1Press MAX to turn on or off the instant
power boost.
If MAX sound is activated,»MAX is
displayed.
EN

49
8 Listen to radio
Tune to a radio station
1Press TUNER repeatedly to select FM or
AM.
2Press and hold / for more than 2
seconds.
[SEARCH] (search) is displayed.»
The radio tunes to a station with»
strong reception automatically.
3Repeat step 2 to tune to more stations.
To tune to a weak station, press•
/repeatedly until you find optimal
reception.
Program radio stations
automatically
You can program a maximum of 40 preset
radio stations.
1In the tuner mode, press and hold PROG
for more than 2 seconds to activate
automatic program mode.
[AUTO] (auto) is displayed.»
All available stations are programmed»
in the order of waveband reception
strength.
The first programmed radio station is»
broadcast automatically.
Customize sound for room
acoustics
1During play, press VAC/IS repeatedly to
select a type of listening environment:
[HALL] (hall)•
[CONCERT] (concert)•
[CINEMA] (cinema)•
English
EN

50
9 USB/SD record
Audio CD tracks, MP3 files, radio, and audio from
external devices are recorded in .mp3 format, and
WMA files are recorded in .wma format.
The first time you record to a USB/SD device,
a folder called ‘PHILIPS’ is automatically created
in the USB/SD device. Each time you record to
a USB/SD device, the recorded files are stored
in a subfolder in the ‘PHILIPS’ folder. Files and
subfolders are named numerically in the order
in which they are created.
Record to a USB/SD device
1Connect a USB/SD device.
2Prepare the source to record from.
Disc - Select the disc source and load•
a disc. You can select a track from
which a recording starts.
Radio - Tune to a radio station.•
MP3 LINK/AUX - Select the MP3•
link/AUX source, and then connect
and start to play an external device.
Karaoke - Singing during karaoke.•
3Press USB RECORD or SD RECORD to
start recording.
For discs, press• USB RECORD or
SD RECORD repeatedly to select:
A[REC ONE] (record one): the first/
current track is recorded.
B[REC ALL] (record all): all tracks/the
remaining tracks are recorded.
Disc play starts automatically from the»
beginning of the disc/the selected track,
and the recording starts.
To stop recording, press• .
Tip
If the USB/SD device does not have enough•
memory to store the audio files, a message
about a full memory is displayed.
Program radio stations
manually
You can program a maximum of 40 preset
radio stations.
1Tune to a radio station.
2Press PROG to activate program mode.
[PROG] (program) blinks on the»
display.
3Press ALBUM/PRESET+/- to allocate a
number to this radio station, and then
press PROG to confirm.
The preset number and the frequency»
of the preset station are displayed.
4Repeat the previous steps to program
other stations.
Tip
To overwrite a programmed station, store•
another station in its place.
Select a preset radio station
1In tuner mode, press ALBUM/PRESET+/-
to select a preset number.
Tip
Position the antenna as far as possible from•
TV, VCR, or other radiation source.
For optimal reception, fully extend and adjust
•
the position of the antenna.
EN

51
2Press to stop recording.
Tip
If the USB/SD storage device does not•
have enough memory to store the audio
files, a message about a full memory is
displayed.
Anytime recording is not available for CD-MP3•
and CD-WMA discs.
Anytime recording is not available for•
High speed recording.
Schedule radio-to-USB/SD
record
Schedule radio recordings in advance and you
can listen to your favorite programs at your
convenience.
Note
A recording is activated only in the standby•
mode.
The maximum length of a recording is 12
•
hours.
1Ensure that you set the clock correctly.
2Plug a USB/SD device.
3Tune to a radio station.
4Press to switch to standby mode.
5Press and hold TIMER for more than 2
seconds.
A prompt to select the source is»
displayed.
6Press TUNER repeatedly to select FM or
AM.
7Press USB RECORD or SD RECORD.
The start timer digits are displayed and»
begin to blink.
8Press ALBUM/PRESET+/- to set the hour.
9Press / to set the minute.
10 Press TIMER to confirm.
Record CDDA contents to
USB/SD device with high speed
To record the CDDA content into a USB/SD
storage device with high speed,
1Connect a USB/SD device.
2Press DISC to select the disc source.
3Load a CDDA disk.
4Press to stop play.
5Press and hold USB RECORD or
SD RECORD until [HIGH SPEED
RECORDING] is displayed.
Press• USB RECORD or SD
RECORD repeatedly to select:
A [REC ONE] (record one): the first/
current track is recorded.
B[REC ALL] (record all): all tracks/the
remaining tracks are recorded.
The recording starts.»
To stop recording, press• .
Tip
If the USB/SD device does not have enough•
memory to store the audio files, a message
about a full memory is displayed.
During high speed recording, speaker will be
•
no sound output.
Record CDDA contents to a
USB/SD device at any playback
time
Note
Make sure that the USB/SD storage device is•
connected to the main unit.
To record the CDDA content into a USB/SD
storage device at any playback time:
1Press USB RECORD or SD RECORD
during CDDA playback.
The recording starts.»
English
EN

52
10 Other features
Set the alarm timer
This unit can be used as an alarm clock. A disc,
radio, or USB/SD device is activated to play at a
preset time.
Note
If you have set a record timer and an alarm•
timer, only the latest timer is activated.
1Ensure that you have set the clock
correctly.
2Press to switch to standby mode.
3Press and hold TIMER for more than 2
seconds.
A prompt to select the source is»
displayed.
4Press CD 1/2/3, or TUNER or USB/SD
to select a source.
5Press TIMER to confirm.
The clock digits are displayed and»
begin to blink.
6Press ALBUM/PRESET+/- to set the hour.
7Press / to set the minute.
8Press TIMER to confirm.
The timer is set and activated.»
To deactivate or reactivate an alarm timer
1In the standby mode, press TIMER
repeatedly.
If the timer is activated,»is displayed.
If the timer is deactivated,»
disappears.
Tip
In MP3 link or AUX mode, the alarm timer•
cannot be set.
If a disc or USB/SD source is selected but no
•
audio file can be played, radio is activated
automatically.
The end timer digits are displayed and»
begin to blink.
11 Press ALBUM/PRESET+/- to set the hour.
12 Press / to set the minute.
13 Press TIMER to confirm.
»is displayed.
At the scheduled times, the recording»
begins and ends automatically.
When the recording ends, the unit»
switches to standby mode.
To deactivate or reactivate a record timer
1In the standby mode, press TIMER
repeatedly.
If the timer is activated,»is displayed.
If the timer is deactivated,»
disappears.
EN

53
the• AUX IN jacks on the back of the
unit.
the AUDIO OUT jacks on an•
external device.
3Start to play the device (refer to the
device’s user manual).
Delete from a USB/SD device
1During play from a USB/SD device, press
/to select an audio file.
To delete an audio folder, in the stop•
position, press ALBUM/PRESET+/-
to select an audio folder.
2Press USB DELETE or SD DELETE.
A confirmation message is displayed.»
3While the message is displayed, press
USB DELETE or SD DELETE again to
confirm.
To cancel, press• .
Copy files between SD and
USB device
You can copy MP3 / WMA file between USB
and SD device.
1Connect both USB and SD devices.
2Press USB/SD to select the USB/SD
source.
3Select an audio file.
4Press USB to SD or SD to USB to start
copy.
You can press• USB to SD or SD to
USB repeatedly to select:
A [COPY ONE] (copy one): the first/
current file is copied.
B [COPY ALL] (copy all): all files/the
remaining files are copied.
The track number and the percentage»
of copy progress are displayed.
Press• to stop copy.
Set the sleep timer
This unit can switch to standby automatically
after a set period.
1When the unit is turned on, press SLEEP
repeatedly to select a set period (in
minutes).
When sleep timer is activated,»is
displayed.
To deactivate sleep timer
1Press SLEEP repeatedly until [OFF] (off)
is displayed.
When sleep timer is deactivated,»
disappears on the display.
Listen to an external device
You can listen to an external audio device
through this unit.
For audio players with headphone sockets
1Press MP3 LINK/AUX repeatedly to
select the MP3 link source.
2Connect the supplied MP3 link cable to:
the• MP3 LINK jack (3.5mm) on the
unit.
the headphone jack on an external•
device.
3Start to play the device (refer to the
device’s user manual).
For audio players with red/white audio output
sockets
1Press MP3 LINK/AUX repeatedly to
select the AUX source.
2Connect the audio cables (white/red
jacks, not supplied) to:
English
EN