Philips MC145/12 User manual

2
User manual
1
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Quick Start Guide
MC145
Quick Start Guide
Setup
Step A
Enjoy
Step B
Pull out the insulation
plastic sheet.
Remote Control
User manual
MC145 QUG_Eng 2006.4.13, 15:451

Setup
FM ANT
AC ~
110V
220V
Speaker
(right)
Speaker
(left)
AC power cord
FM antenna
1
2
Tip
It is unnecessary to
connect the FM pigtail
antenna since it is
fixed to the main unit.
Connection
1Connect the speaker wires to the SPEAKERS terminals.
2After ensuring all the above connections have been made, connect
the power cord of the system to the AC power outlet.
Setting the clock
1In standby mode, press DISPLAY/CLOCK button..
The clock digits for the hours flash.
2Press ¡1 / 2™ to set the hours.
3Press DISPLAY/CLOCK again. The clock digits for the minutes flash.
4Press ¡1 / 2™ to set the minutes.
5Press DISPLAY/CLOCK to confirm the time.
MC145 QUG_Eng 2006.4.13, 15:452

Enjoy
Step B
Tip
Detailed playback features and additional
functions are described in the accompany
user's manual.
Playing a disc
1Select CD source.
2Press OPEN•CLOSE on the top of the system to open the CD door.
3Insert a disc with printed side facing up and press down
on OPEN•CLOSE to close the CD door.
4Press 2; to start playback.
5Press 9to stop playback.
Auto programming radio stations
1Press SOURCE (TUNER on the remote control) to select tuner source.
2Press STOP/BAND (on the set) or TUNER (on the remote control)
once or more to select your waveband.
3Press PRESET G/H(3/ 4on remote control) to select the preset
number where programming should start.
4Press PROG for more than 2 seconds to activate programming.
MC145 QUG_Eng 2006.4.13, 15:453