Philips MCM309R/37 User manual

MCM309R/37
©Copyright 2007 Philips Consumer Electronics B.V. Eindhoven, The Netherlands
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without
the prior permission of Philips.
Published by SL 0709 Service Audio Printed in The Netherlands Subject to modification
Micro System
Version 1.0
CLASS 1
LASER PRODUCT
©3141 785 31640
TABLE OF CONTENTS
Page
Location of PC Boards & Versions Variation ........................1-2
Specifications .......................................................................1-3
Measurement Setup.............................................................1-4
Service Aids, Safety Instruction, etc...........................1-5 to 1-7
Preparations & Controls ...........................................1-8 to 1-11
Disassembly Instructions & Service positions.........................2
Service Test Program..............................................................3
Set Block Diagram...................................................................4
Set Wiring Diagram .................................................................5
Main Board..............................................................................6
ECO 6 Tuner Board : Systems Non Cenelec ........................7A
Power Board............................................................................8
Display (MCU) Board...............................................................9
Key Boards............................................................................10
Set Mechanical Exploded View & Parts List.......................... 11

1-2
/37 /55
Auxin/CDRin x x
Line Out
Video Out
Surround Out
Subwoofer Out
Digital Out
Digital in
Matrix Surround
RDS/NEWS
Dolby Pro Logic (DPL)
Incredible Surround
Karaoke Features
Voltage Selector
ECO Power Standby (Clock Display Off) x x
ECO6 Tuner Board - Systems Non-Cenelec
ECO6 Tuner Board - Systems Cenelec x x
VERSION VARIATIONS:
Type /Versions: MCM309R
Features &
Board in used:
USB Direct
x
xx
/98
x
x
x
x
x
LACATION OF PCBS

1-3
GENERAL:
Mains voltage : 110-127V/220-240VSwitchablefor/55/98
117V ± 10% for /37
220V ± 10% for /61/93
230 ± 10% for /05/12
Mains frequency : 50/60Hz
Power consumption : 30W at 1/8Prated
< 1W at ECO Standby
Clock accuracy : < 4 seconds per day
Dimension centre unit : : 430 x 110 x 290 mm ( L x D x H )
TUNER:
FM
Tuning range : 87.5-108MHz
Grid : 50kHz
100kHz for /37
IF frequency : 10.7MHz ± 25kHz
Aerial input : 75 ohm coaxial
300 ohm click fit for /37
Sensitivity at 26dB S/N : < 22uV
Selectivity at 600kHz bandwidth : > 25dB
Image rejection : > 20dB
Distortion at RF=1mV, dev. 75kHz : < 7%
-3dB Limiting point : < 26dBf
Crosstalk at RF=1mV, dev. 40kHz : > 18dB
AM
Tuning range : 531-1602kHz
530-1700kHzfor/98/37
Grid : 9kHz
10kHz for /98/37
IF frequency : 450kHz ± 1kHz
Aerial input : Frame aerial
Sensitivity at 26dB S/N : < 22uV
Selectivity at 18kHz bandwidth : > 18dB
IF rejection : > 45dB
Image rejection : > 28dB
Distortion at RF=50mV, M=80% : < 5%
AMPLIFIER:
Output power (4 ohm, 1kHz, 10% THD)
L&R : 2x10WRMS
Frequency response within -3dB : 125Hz-16kHz
DSC : Rock, Pop, Jazz, Classic
Incredible Surround : On / Off
Input sensitivity Aux in (at 1kHz) : 500mV at 600 ohm
CD (Audio Disc1) : 0dB track (Trk 35)
Output sensitivity
Headphone output at 32 ohm : 700mV±2dB(Max.vol
.
COMPACT DISC:
Measurement done directly at the connector on the board
.
Output Resistance : < 100 ohm
Output Voltage (0dB, 1kHz) : 0.5Vrms ± 1dB (unloaded)
Channel Unbalance : < 3dB
Channel Separation (1kHz) : > 40dB
Frequency Response (±3dB) : 125Hz-16kHz
Signal to Noise Ratio : > 58dBA
MP3-CD Bit Rate : 8-320kbps
Sampling Frequencies : 8,11.025,12,16,22.05,24,
32,44.1,48kHz
WMA-CD Bit Rate : 64-192kbps
240 ± 10% for /79
Tuner : FM67.5kHz DEV/AM
8
Recording Format : ISO9660 UDF format not
supported
SPECIFICATIONS

1-4
Low pass filter 22kHz
L
R
LEVEL METER
e.g. Sennheiser UPM550
with FF-filter
S/N and distortion meter
e.g. Sound Technology ST1700B
DUT
CD
Use Audio Signal Disc SBC429 4822 397 30184 (replaces test disc 3)
L.P.F. = 13 th order filter 4822 395 30204
MEASUREMENT SETUP

1-5
Service Tools:
Universal Torx driver holder .................................4822 395 91019
Torx bit T10 150mm ...........................................4822 395 50456
Torx driver set T6-T20 .........................................4822 395 50145
Torx driver T10 extended .....................................4822 395 50423
Compact Disc:
SBC426/426A Test disc 5 + 5A ...........................4822 397 30096
SBC442 Audio Burn-in test disc 1kHz .................4822 397 30155
SBC429 Audio Signals disc .................................4822 397 30184
Dolby Pro-logic Test Disc ....................................4822 395 10216
ESD Equipment:
Anti-static table mat - large 1200x650x1.25mm ...4822 466 10953
anti-static table mat - small 600x650x1.25mm .....4822 466 10958
Anti-static wristband ............................................4822 395 10223
Connectorbox (1MΩ) ..........................................4822 395 11307
Extension cable
(to connect wristband to conn.box) ..........4822 320 11305
Connecting cable
(to connect table mat to conn.box) ...........4822 320 11306
Earth cable (to Connect product to mat or box) --4822 320 11308
Complete kit ESD3
(combining all above products) ...............4822 320 10671
Wristband tester ...................................................4822 344 13999
SERVICE AIDS
HANDLING CHIP COMPONENTS

1-6
GB
WARNING
All ICs and many other semi-conductors are
susceptible to electrostatic discharges (ESD).
Careless handling during repair can reduce life
drastically.
When repairing, make sure that you are
connected with the same potential as the mass
of the set via a wrist wrap with resistance.
Keep components and tools also at this
potential.
F
ATTENTION
Tous les IC et beaucoup d’autres
semi-conducteurs sont sensibles aux
décharges statiques (ESD).
Leur longévité pourrait être considérablement
écourtée par le fait qu’aucune précaution n’est
prise à leur manipulation.
Lors de réparations, s’assurer de bien être relié
au même potentiel que la masse de l’appareil et
enfiler le bracelet serti d’une résistance de
sécurité.
Veiller à ce que les composants ainsi que les
outils que l’on utilise soient également à ce
potentiel.
ESD
D
WARNUNG
Alle ICs und viele andere Halbleiter sind
empfindlich gegenüber elektrostatischen
Entladungen (ESD).
Unsorgfältige Behandlung im Reparaturfall kan
die Lebensdauer drastisch reduzieren.
Veranlassen Sie, dass Sie im Reparaturfall über
ein Pulsarmband mit Widerstand verbunden
sind mit dem gleichen Potential wie die Masse
des Gerätes.
Bauteile und Hilfsmittel auch auf dieses gleiche
Potential halten.
NL
WAARSCHUWING
Alle IC’s en vele andere halfgeleiders zijn
gevoelig voor electrostatische ontladingen (ESD).
Onzorgvuldig behandelen tijdens reparatie kan
de levensduur drastisch doen verminderen.
Zorg ervoor dat u tijdens reparatie via een
polsband met weerstand verbonden bent met
hetzelfde potentiaal als de massa van het
apparaat.
Houd componenten en hulpmiddelen ook op
ditzelfde potentiaal.
I
AVVERTIMENTO
Tutti IC e parecchi semi-conduttori sono
sensibili alle scariche statiche (ESD).
La loro longevità potrebbe essere fortemente
ridatta in caso di non osservazione della più
grande cauzione alla loro manipolazione.
Durante le riparazioni occorre quindi essere
collegato allo stesso potenziale che quello della
massa dell’apparecchio tramite un braccialetto
a resistenza.
Assicurarsi che i componenti e anche gli utensili
con quali si lavora siano anche a questo
potenziale.
GB
ESD PROTECTION EQUIPMENT:
Complete Kit ESD3 (small tablemat, wristband,
connection box, extention cable and earth cable) ........... 4822 310 10671
Wristband tester ....................................................................4822 344 13999
CLASS 1
LASER PRODUCT
GB
Warning !
Invisible laser radiation when open.
Avoid direct exposure to beam.
S
Varning !
Osynlig laserstrålning när apparaten är öppnad och spärren
är urkopplad. Betrakta ej strålen.
SF
Varoitus !
Avatussa laitteessa ja suojalukituksen ohitettaessa olet alttiina
näkymättömälle laserisäteilylle. Älä katso säteeseen!
DK
Advarse !
Usynlig laserstråling ved åbning når sikkerhedsafbrydere er
ude af funktion. Undgå udsaettelse for stråling.
F
"Pour votre sécurité, ces documents doivent être utilisés par
des spécialistes agréés, seuls habilités à réparer votre
appareil en panne".
GB
Safety regulations require that the set be restored to its original
condition and that parts which are identical with those specified,
be used
Safety components are marked by the symbol
!
.
NL
Veiligheidsbepalingen vereisen, dat het apparaat bij reparatie in
zijn oorspronkelijke toestand wordt teruggebracht en dat onderdelen,
identiek aan de gespecificeerde, worden toegepast.
De Veiligheidsonderdelen zijn aangeduid met het symbool
!
F
Les normes de sécurité exigent que l’appareil soit remis à l’état
d’origine et que soient utiliséés les piéces de rechange identiques
à celles spécifiées.
Less composants de sécurité sont marqués
!
D
Bei jeder Reparatur sind die geltenden Sicherheitsvorschriften zu
beachten. Der Original zustand des Geräts darf nicht verändert werden;
für Reparaturen sind Original-Ersatzteile zu verwenden.
Sicherheitsbauteile sind durch das Symbol
!
markiert.
I
Le norme di sicurezza esigono che l’apparecchio venga rimesso
nelle condizioni originali e che siano utilizzati i pezzi di ricambio
identici a quelli specificati.
Componenty di sicurezza sono marcati con
!
GB
After servicing and before returning set to customer perform a leakage
current measurement test from all exposed metal parts to earth ground to
assure no shock hazard exist. The leakage current must not exceed
0.5mA.

1-7

1-8
EgZeVgVi^dch
GZVgXdccZXi^dch The type plate is located at the rear of the system.
AEdlZg
7Z[dgZXdccZXi^c\i]Z68edlZgXdgYidi]Z
lVaadjiaZi!ZchjgZi]ViVaadi]ZgXdccZXi^dch ]VkZWZZcbVYZ# Warning! – For optimal performance, use only the original power cable. – Never make or change any connections with the power switched on. To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it cdiVkV^aVWaZ[dgVaakZgh^dch#
B6ciZccVh8dccZXi^dc
8dccZXii]Zhjeea^ZY6BaddeVciZccVVcY;B
VciZccVidi]ZgZheZXi^kZiZgb^cVah#6Y_jhii]Z edh^i^dcd[i]ZVciZccV[dgdei^bVagZXZei^dc# 6B6ciZccV Edh^i^dci]ZVciZccVVh[VgVhedhh^WaZ[gdbVIK! K8Gdgdi]ZggVY^Vi^dchdjgXZ#
;B6ciZccV
6B6ciZccV
HeZV`Zg
g^\]i
HeZV`Zg
aZ[i
68edlZg
;B6ciZccV
1
2
;dgWZiiZg;BhiZgZdgZXZei^dc!XdccZXiVc djiYddg;BVciZccVidi]Z;B6CI:CC6 iZgb^cVa#
CHeZV`Zgh8dccZXi^dc
;gdciHeZV`Zgh 8dccZXii]ZheZV`Zgl^gZhidi]ZHE:6@:GH iZgb^cVah!g^\]iheZV`ZgidG><=IVcYaZ[i heZV`ZgidA:;I!XdadgZYbVg`ZYl^gZid  VcYWaVX`jcbVg`ZYl^gZid"# ;jaan^chZgii]Zhig^eeZYedgi^dcd[i]ZheZV`Zg l^gZ^cidi]ZiZgb^cVaVhh]dlc# CdiZh/ ¶ ;dgdei^bVahdjcYeZg[dgbVcXZ!jhZi]Z hjeea^ZYheZV`Zgh# ¶ 9dcdiXdccZXibdgZi]VcdcZheZV`ZgidVcn dcZeV^gd[ $"heZV`ZgiZgb^cVah# ¶ 9dcdiXdccZXiheZV`Zghl^i]Vc^beZYVcXZ adlZgi]Vci]ZheZV`Zghhjeea^ZY#EaZVhZgZ[Zgid i]ZHE:8>;>86I>DCHhZXi^dcd[i]^hbVcjVa# EaVX^c\i]ZhZiVcYheZV`Zgh L^i]i]Zhjeea^ZYYZiVX]VWaZhiVcYhVcYlVaa bdjci^c\`^i!ndjXVcZ^i]ZgeaVXZi]ZbV^chZi VcYheZV`ZghdcYZh`idedgbdjcii]Zbdcid lVaa#9Zh`ide^chiVaaVi^dc^hiV`Zc[dgZmVbeaZ ]ZgZ#;dg]dlidbdjcii]ZhnhiZbdcidlVaa! eaZVhZgZ[ZgidAppendix VcYi]ZViiVX]ZYWall Mounting Instructions#
EgZeVgVi^dch
16a^\ci]Zh^YZbVg`ZYEG:HH4d[i]ZaVg\Zg"
h^oZhiVcYl^i]i]ZhadihVii]ZWdiidbd[i]Z bV^chZi#
2Ejh]i]ZhiVcYYdlc^cidi]Zhadihjci^andj
]ZVgVXa^X`#
36iiVX]i]ZildhbVaaZg"h^oZhiVcYhidi]Z
heZV`Zgh^ci]ZhVbZlVn#
4EaVXZi]ZbV^chZiVcYheZV`Zghjeg^\]idci]Z
YZh`idel^i]i]Zhjeedgid[i]ZhiVcYh# CdiZ/ ¶ IdgZbdkZi]ZhiVcY[gdbi]ZbV^chZidgZ^i]Zg heZV`Zg!l]^aZegZhh^c\YdlcEG:HH4! ejaai]Z hiVcYdji[gdbi]Zhadih# Dei^dcVaXdccZXi^dc I]Zdei^dcVaZfj^ebZciVcYXdccZXi^c\XdgYhVgZ cdihjeea^ZY#GZ[Zgidi]ZdeZgVi^c\^chigjXi^dch d[i]ZXdccZXiZYZfj^ebZci[dgYZiV^ah#
8dccZXi^c\di]ZgZfj^ebZciidndjg hnhiZb
8dccZXii]ZVjY^daZ[iVcYg^\]iDJIiZgb^cVah d[VIK!K8G!AVhZg9^hXeaVnZg!9K9eaVnZgdg 89GZXdgYZgidi]Z6JM$89G>CiZgb^cVah# CdiZ/ ¶ >[ndjVgZXdccZXi^c\Zfj^ebZcil^i]Vbdcd djiejiVh^c\aZVjY^ddjiiZgb^cVa!XdccZXi^iid i]Z6JMaZ[iiZgb^cVa#6aiZgcVi^kZan!ndjXVcjhZV ¸h^c\aZidYdjWaZ¹X^cX]XVWaZi]ZdjiejihdjcY hi^aagZbV^cbdcd#
PREPARATIONS

1-9
EgZeVgVi^dch
>chZgi^c\WViiZg^Zh^cidi]Z GZbdiZ8dcigda
1
3
2
1DeZci]ZWViiZgnXdbeVgibZci# 2>chZgiild666WViiZg^Zh[daadl^c\i]Z
^cY^XVi^dch $"^ch^YZi]ZXdbeVgibZci#
38adhZi]ZXdkZg#
Jh^c\i]ZGZbdiZ8dcigdaiddeZgViZ i]ZEaVnZg
16^bi]ZGZbdiZ8dcigdaY^gZXianVii]ZgZbdiZ
hZchdg>Gdci]Z[gdcieVcZa#
29dcdiejiVcndW_ZXihWZilZZci]ZGZbdiZ
8dcigdaVcYi]ZhnhiZbl]^aZdeZgVi^c\i]Z hnhiZb# 86JI>DC –GZbdkZWViiZg^Zh^[i]ZnVgZ Zm]VjhiZYdg^[i]ZGZbdiZ8dcigda^h cdiWZ^c\jhZY[dgVadc\i^bZ# –9dcdijhZdaYVcYcZldgY^[[ZgZci ineZhd[WViiZg^Zh^cXdbW^cVi^dc# –7ViiZg^ZhXdciV^cX]Zb^XVahjWhiVcXZh! hdi]Znh]djaYWZY^hedhZYd[egdeZgan#
5 7 ! 4 0 9 9
9
8 2 7 #
7 9 1 3 @ 6 7
PREPARATIONS & CONTROLS

1-10
1@ 2 3 4 # 9 0 % ^ & ∞
5 $ 8 ! ™ ¡ ) ( * £ ≤
7 6 • §
6 7 ≥
8dcigdah
8dcigdahdci]ZhnhiZb (illustrations on page 3)
1HI6C97N"DC$:8DEDL:GB ¶hl^iX]Zhi]ZhnhiZbdcdgid:XdEdlZg
hiVcYWn$cdgbVahiVcYWnl^i]XadX`Y^heaVn#
29^heaVnhXgZZc ¶h]dlhi]ZhiVijhd[i]ZhnhiZb# 3A:;IDE:C8ADH: ¶deZch$XadhZhi]ZaZ[i89Yddg# 4G><=IDE:C8ADH: ¶deZch$XadhZhi]Zg^\]i89Yddg# 5>G ¶gZbdiZhZchdg 6KDAJB: -$+ ¶VY_jhihi]ZkdajbZaZkZa# 79^hXigVnh 8BdYZHZaZXi^dc
6A7JB-$+à$á [dgIJC:G #################### ijcZhidVhiVi^dc# [dg89$BE("89 ######## [VhihZVgX]ZhWVX`VcY
[dglVgYl^i]^cVigVX`$Y^hX egZhhVcY]daY#
[dgBE("89 ################# h`^ehidi]ZWZ\^cc^c\d[V
XjggZci$egZk^djh$ hjWhZfjZciVaWjb#
[dg8adX`$I^bZg ######### hZihi]Z]djg# 9######################################### hidehY^hXeaVnWVX`dg
ZgVhZhVY^hXegd\gVb#
ÉÅ ############################### hiVgihdg^ciZggjeih
eaVnWVX`#
I>IA: -$+¡$™ [dgIJC:G #################### hZaZXihVegZhZigVY^d
hiVi^dc#
[dg89$BE("89 ###### h`^ehidi]ZWZ\^cc^c\d[V
XjggZci$egZk^djh$ hjWhZfjZciigVX`#
[dg8adX`$I^bZg ######### hZihi]Zb^cjiZ#
99>H8&$'$($) ¶hZaZXihVY^hXigVn[dgeaVnWVX`# 0EGD<G6B
[dg89$BE("89 ######## egd\gVbbZhigVX`hVcY
gZk^Zlhi]Zegd\gVb#
[dgIJC:G #################### egd\gVbhijcZghiVi^dch#
!HDJG8: ¶hZaZXihi]ZgZheZXi^kZhdjcYhdjgXZ[dg89$
IJC:G;B$6B$6JM#
@8AD8@I>B:G ¶hZihi]ZXadX`dgi^bZg[jcXi^dc# #n ¶XdccZXih]ZVYe]dcZh
8dcigdahdci]ZgZbdiZ^aajhigVi^dch
dceV\Z)
1HI6C97N"DCB ¶hl^iX]Zhi]ZhnhiZbdcdgid:XdEdlZg
hiVcYWn$cdgbVahiVcYWnl^i]XadX`Y^heaVn#
2HdjgXZhZaZXi^dcJH7jcVkV^aVWaZ[dg
i]^hkZgh^dc
¶hZaZXihi]ZgZheZXi^kZhdjcYhdjgXZ[dg89$
IJC:G;B$6B$6JM#
389&$'$($) ¶hZaZXihVY^hXigVn[dgeaVnWVX`# 4Aç ¶deZch$XadhZhi]ZaZ[i89Yddg# 5Gç ¶deZch$XadhZhi]Zg^\]i89Yddg# 6à$á
[dgIJC:G #################### ijcZhidVhiVi^dc# [dg89$BE("89 ######## [VhihZVgX]ZhWVX`VcY
[dglVgYl^i]^cVigVX`$Y^hX egZhhVcY]daY#
[dgBE("89 ################# h`^ehidi]ZWZ\^cc^c\d[V
XjggZci$egZk^djh$ hjWhZfjZciVaWjb#
[dg8adX`$I^bZg ######### hZihi]Z]djg#
7¡$™
[dg89$BE("89 ###### h`^ehidi]ZWZ\^cc^c\d[V
XjggZci$egZk^djh$ hjWhZfjZciigVX`#
8KDA $" ¶VY_jhihi]ZkdajbZaZkZa# 96A7JB$EG:H:I $"
[dgIJC:G #################### hZaZXihVegZhZigVY^d
hiVi^dc#
[dgBE("89 ################# h`^ehidi]ZWZ\^cc^c\d[V
XjggZci$egZk^djh$ hjWhZfjZciVaWjb#
[dg8adX`$I^bZg ######### hZihi]Zb^cjiZ#
CONTROLS

1-11
CONTROLS AND TROUBLESHOUTING
8dcigdah
Notes for remote control: – First select the source you wish to control by pressing one of the source select keys on the remote control (for example CD,TUNER). – Then select the desired function (for example
ÉÅ
,
í
,
ë
).
0ÉÅ ¶hiVgihdg^ciZggjeiheaVnWVX`# !9 ¶hidehY^hXeaVnWVX`dgZgVhZhVY^hXegd\gVb# @BJI: ¶^ciZggjeihVcYgZhjbZhhdjcYgZegdYjXi^dc# #>H>cXgZY^WaZHjggdjcY ¶VXi^kViZhdgYZVXi^kViZhi]ZhjggdjcYhdjcY
Z[[ZXi#
$9779ncVb^X7Vhh7ddhi ¶Zc]VcXZhi]ZWVhh# %C:LH$G9HjcVkV^aVWaZ[dgi]^hkZgh^dc ^CjbZg^X@ZneVY%".
[dg89$BE("89 ######## hZaZXihVigVX`[dgeaVnWVX`
Y^gZXian#
&EGD<G6B
[dg89$BE("89 ######## egd\gVbhigVX`hVcY
gZk^Zlhi]Zegd\gVb#
[dgIJC:G #################### egd\gVbhijcZghiVi^dch#
*9>B ¶ijgchdcdgd[[i]ZY^b[jcXi^dc[dgi]ZY^heaVn
hXgZZc#
(HA::E ¶VXi^kViZh$YZVXi^kViZhdghZaZXihi]ZhaZZeZgi^bZ# )I>B:GDC$D;; ¶VXi^kViZh$YZVXi^kViZhi]Zi^bZg[jcXi^dc# ¡I>B:G ¶hZihi]Zi^bZg[jcXi^dc# ™8AD8@ ¶hZihi]ZXadX`[jcXi^dc# £9>HEA6N ¶Y^heaVnhY^hX^c[dgbVi^dcYjg^c\eaVnWVX`# ≤H=J;;A: ¶eaVnhY^hXigVX`h^cgVcYdbdgYZg# ∞G:E:6I ¶gZeZVihVigVX`$Y^hXegd\gVb$Zci^gZY^hX# §9:AjcVkV^aVWaZ[dgi]^hkZgh^dc ≥G:8jcVkV^aVWaZ[dgi]^hkZgh^dc •9H89^\^iVaHdjcY8dcigda ¶hZaZXihhdjcYX]VgVXiZg^hi^Xh/GD8@$?6OO$EDE$
8A6HH>8#
IgdjWaZh]ddi^c\
WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. ¸/0%*4$ ¹^hY^heaVnZY# GVY^dgZXZei^dc^heddg# I]ZhnhiZbYdZhcdigZVXil]ZcWjiidch VgZegZhhZY# HdjcYXVccdiWZ]ZVgYdg^hd[eddg fjVa^in# I]ZaZ[iVcYg^\]ihdjcYdjiejihVgZ gZkZghZY# I]ZgZbdiZXdcigdaYdZhcdi[jcXi^dc egdeZgan# I]Zi^bZg^hcdildg`^c\# I]Z8adX`$I^bZghZii^c\^hZgVhZY#
>chZgiVY^hX# 8]ZX`^[i]ZY^hX^h^chZgiZYjeh^YZYdlc# LV^ijci^ai]Zbd^hijgZXdcYZchVi^dcVii]ZaZch ]VhXaZVgZY# GZeaVXZdgXaZVci]ZY^hX!hZZ¸BV^ciZcVcXZ¹# JhZV[^cVa^hZY89"GLdgVXdggZXiBE("89 [dgbViY^hX# >[i]Zh^\cVa^hiddlZV`!VY_jhii]ZVciZccVdg XdccZXiVcZmiZgcVaVciZccV[dgWZiiZg gZXZei^dc# >cXgZVhZi]ZY^hiVcXZWZilZZci]ZB^Xgd=^;^ HnhiZbVcYndjgIKdgK8G# GZbdkZVcYgZXdccZXii]Z68edlZgeaj\VcY hl^iX]dci]ZhnhiZbV\V^c# 6Y_jhii]ZkdajbZ# 9^hXdccZXii]Z]ZVYe]dcZh# 8]ZX`i]Vii]ZheZV`ZghVgZXdccZXiZY XdggZXian# 8]ZX`^[i]Zhig^eeZYheZV`Zgl^gZ^hXaVbeZY# BV`ZhjgZi]ZBE("89lVhgZXdgYZYl^i]^c ('s'*+`WehW^igViZl^i]hVbea^c\[gZfjZcX^Zh Vi)-`=o!))#&`=odg('`=o# 8]ZX`i]ZheZV`ZgXdccZXi^dchVcYadXVi^dc# HZaZXii]ZhdjgXZ89dgIJC:G![dgZmVbeaZ WZ[dgZegZhh^c\i]Z[jcXi^dcWjiidcÉÅ!í! ë# GZYjXZi]ZY^hiVcXZWZilZZci]ZgZbdiZ XdcigdaVcYi]ZhnhiZb# >chZgii]ZWViiZgnl^i]^ihedaVg^i^Zh  $¶h^\chVa^\cZYVh^cY^XViZY# GZeaVXZi]ZWViiZgn# Ed^cii]ZgZbdiZXdcigdaY^gZXianidlVgY >GhZchdgdci]Z[gdcid[i]ZhnhiZb# HZii]ZXadX`XdggZXian# EgZhhI>B:Gidhl^iX]dci]Zi^bZg# EdlZg]VhWZZc^ciZggjeiZYdgi]ZedlZgXdgY ]VhWZZcY^hXdccZXiZY#GZhZii]ZXadX`$i^bZg#
EgdWaZb Hdaji^dc

2-1 2-1
DISMANTLING INSTRUCTIONS
1) Loosen 4 screws A to remove the Front Panel Ass’y by sliding it
out towards the underside before lifting up as shown in Figure 1.
2) Loosen 7 screws B and 4 screws C to remove the Rear Panel
Ass’y .
- 7 screws on the rear
- 2 screws each on the upside & downside
as shown in Figure 2.
3) Loosen 10 screws D (see Figure 3) to remove the CD Door
Track, then remove Left and Right CD Door.
- 5 screws each on the upper & under side.
Detaching the Control Panel Ass’y from the Front Panel Ass’y
Figure 1
Figure 3
Figure 4
1) Loosen 11 screws E (see Figure 4) to remove the Control
Panel Ass’y .
Figure 2
Dismantling of the Front and Rear Panel assembly
BB
A
CD
E
Detach the speaker stands in the same way as
you do the main unit stand#
To detach the stand from the main unit,
a. As shown,hold down PRESS 4
b. Move out the stand to detach.
1
Detaching the Stands from the Speakers and Main Sets
12

2-2 2-2
Service position A
Service position B
Service position C
DISMANTLING INSTRUCTIONS
Repair Hints & Service Positions
1) DuringrepairitispossibletodisconnecttheTunerBoard
and/or CD Module completely unless the fault is sus-
pected to be in that area. This will not affect the
performance of the rest of the set.
Note: Theflexcables areveryfragile,care shouldbetaken
not to damage them during repair. After repair, be
very sure that the flex cables are inserted properly
intotheflexsocketsbeforeencasing,otherwisefaults
may occurs.

3-1 3-1
Figure 1
Y
N
Y
N
ALBUM+ & PLAY
Button pressed?
Button pressed?
DISPLAY
TEST
Display shows Figure 1
and switch all LEDs on
To hold ALBUM+ &
PROGRAM depressed while
set on standby
Display shows the
ROM version
"Vy--y MTP xx-xx-2006"
(Main menu)
V refers to Version
y--y refers to Software version number of the uProcessor
(counting up from 01 to 99)
xx refers to date number of the production.
ALBUM+ & PLAY
SERVICE TEST PROGRAM

4-1 4-1
SET BLOCK DIAGRAM

SET WIRING DIAGRAM
5-1 5-1

MAIN BOARD
TABLE OF CONTENTS
Main PCB - Layout Top View ...........................................6-2
Main PCB - Layout Bottom View .....................................6-3
Main PCB - Circuit Diagram (Audio Part).........................6-4
Main PCB - Circuit Diagram (CD Part).............................6-5
Class D Power PCB - Layout Top View ..........................6-6
6-1 6-1

6-2 6-2
PCB LAYOUT - MAIN BOARD (TOP VIEW)

PCB LAYOUT - MAIN BOARD (BOTTOM VIEW)
6-3 6-3

6-4 6-4
CIRCUIT DIAGRAM - MAIN BOARD
AUDIO PART