Philips MCD755/93 User manual

MCD755
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
2
User Manual
User manual
Remote control with two
AAA batteries
FM antenna
Control Cable
Composite Video Cable
1
Quick Start Guide
Quick start guide
MCD755 QUG_93-Eng 2007.8.29, 9:541

Subwoofer
Surround
speaker (right)
Surround
speaker (left)
Center speaker
Front speaker (right)
Front speaker (left)
Tips
–See the User Manual for other TV
connection options.
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
2
4
3
Setting up the TV
1
2
Press SOURCE (DISC on the remote control) to select disc source.
Turn on the TV and set it to the correctVideo In channel.
5
Connect the speaker cables.
Connect the FM antenna.
Connect the control cable.
Connect the composite video cable to a TV.
Connect the power cords of the main set and TV.
AC power
FM antenna
1
2
3
4
5
MCD755 QUG_93-Eng 2007.8.29, 9:542

Setting the clock
1
2
3
4
In standby mode, press and hold CLOCK/RDS on the remote control.
When the hour digits flash, turn VOLUME-/+ on the system or press VOLUME+/- on the
remote control to set the hours.
Press CLOCK/RDS again and the minute digits flash.Then turn VOLUME-/+ on the
system or press VOLUME+/- on the remote control to set the minutes.
Press CLOCK/RDS again to confirm the time setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support
progressive signals or the cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM on the remote control to exit the system menu and then DISC
and “1” to exit progressive scan.
Tip
See chapters "Getting Started" and "System Menu Options" in the
User Manual for detailed descriptions.
SPEAKER SETUP
CHANNEL DELAY
MCD755 QUG_93-Eng 2007.8.29, 9:543

1
2
3
Press OPEN •CLOSEç(çon the remote control) to open the disc tray and load in a
disc, then press the same button again to close the disc tray.
➜Make sure the label side of the disc is facing up.
Playback will start automatically. If not pressÉÅ.
To stop playback, press PRESET-/9(9on the remote control).
Playing a disc
Programming and tuning to radio stations
1
2
3
Press SOURCE (TUNER on the remote control) to select tuner source.
Press PROG on the remote control for more than two seconds to program all available
stations in order of waveband.
Press PRESET+/- (CH +/- (¡/ ™)on the remote control) until the desired preset
station is displayed.
Tip
Detailed playback features and
additional functions are described in the
accompany owner's manual.
PDCC-JS/JW-0733
OPEN•CLOSE
Notes for remote control:
– First, select the source you wish to control by
pressing one of the source select keys on the remote
control (DISC orTUNER, for example).
–Then select the desired function (
2; , í , ë for
example).
CRoyal Philips Electronics N.V. 2007
All rights reserved.
http://www.philips.com
MCD755 QUG_93-Eng 2007.8.29, 9:544