Philips Streamium WACS4500 Quick start guide

WACS4500
Connect to your PC
Connect Philips Wireless Music Center to your PC if you want to do
the following:
●Access music files stored on your PC from Philips Music Center/
Station’s UPnP source
●Manage the music content stored on Philips Music Center from your
PC
●Update Center’s Gracenote®music recognition service database for
the latest disc information
●Upgrade firmware of Philips Music Center + Station
ENG
SOURCE
SOURCE
To connect to Philips Music Center, your minimum PC requirements must be:
UPnP playback
●Windows 2000/XP (Home or Professional)
●Pentium III 500MHz processor or higher
●256MB RAM
●CD-ROM Drive
●Ethernet Adapter (for wired connection)/ Wireless
Network Adaptor 802.11 b/g (for wireless connection)
●Free hard disk space of 500MB
●Windows Media Player® 9.0 or later installed
Wireless Music
Center + Station
未标题-1 1 2006-11-29 5:20:56 PM

PC StationCenterAccess Point
12
Set up connection between Center and your PC
WIRED WIRELESS
Connect supplied
(Orange) Ethernet
cable from Center to
your PC
1
Install Wireless Audio Device Manager (WADM)
and Philips Media Manager (PMM)
Launch WADM. Is your connection established?
2
YES
Congratulations!
Connection between
Center and your PC
is successful!
NO
Build new connection (only for wired connection)
OR
Check your network
settings
Use WADM Use UPnP
3
For more information, see
B
For more information, see
C
a. Enable your wireless
Access Point/router
b. Configure Network from
Center : Select MENU>Settings
>Network > Wireless > (Select
desired network) > (Input the
encryption key) > Automatic >
Apply Settings > Yes
a. Center: Enter Installation
Mode
b. Station: Enter Installation
Mode
1
2
For more information, see
A
Do you want to connect wired or wirelessly?
未标题-1 2 2006-11-29 5:21:04 PM

Set up a wired connection
A1
Connect Center to PC directly with the supplied (orange) Ethernet
cable
OR
Connect Center directly to Access Point with the supplied (orange)
Ethernet cable
ETHERNET
LAN
Tips:
●Make sure that Ethernet port on your PC is 'Enabled' to make WADM
connection.
●If your PC operation system is Windows Vista, please right click on
WADM, select Properties --> Compatibility, and make sure the
check-box under "Compatibility mode" and "Privilege level" is marked,
then click OK. Otherwise your WADM may not able to be launched.
未标题-1 3 2006-11-29 5:21:05 PM

a. On Center :
●Press the MENU button
●Select Settings>Network >
Wireless > (Select desired net-
work) >
(Input the encryption key by
using the 1way remote con-
trol) > Automatic > Apply
Settings > Yes
b. On Station :
●Repeat the same steps above or
refer to step 2 below to
connect the Station to the
Center
1
Set up a wireless connection
PC StationCenterAccess Point
12
PC StationCenter
12
A2
a. On Center :
●Select HD source, and then
press the MENU button
●Select Station Mgnt > Add
New Station
b. On Station :
●Press the MENU button
●Select Installation Mode
2
Do you have a wireless Access Point?
YES NO
a. On Center :
●Press the MENU button
●Select Information > WiFi >
WEP Key to retrieve WEP key
b. On PC :
●Select Start > Control Panel >
Network Connections >
Enable Wireless Network
Connections > View Available
Wireless Networks > Select
Center’s network > Input
retrieved Center’s WEP key
1
a. On Center :
●Select HD source, and then
press the MENU button
●Select Station Mgnt > Add
New Station
b. On Station :
●Press the MENU button
●Select Installation Mode
2
Tips:
●Check that PC’s wireless network adaptor is enabled.
●Locate Center closer to your wireless Access Point.
●Make sure that DHCP is enabled on your wireless Access Point.
If not available, choose Static and key in IP configuration
未标题-1 4 2006-11-29 5:21:06 PM

Install and launch WADM
Insert PC Suite CD into PC
Select desired language and accept license terms
Select ‘WADM’ and select ‘Next’ to start installation
To launch WADM, double click the desktop icon
A list of found Center/ Station appears
Select desired Center/Station,
and then click Connect now
OR
If desired Center/Station is not found :
●Wired connection: Select Connection
Wizard >Express mode>Next to
build new connection
Note: If you selected Connection Wizard >Custom mode, it
will select Wireless network adaptor automatically by default if the
PC has both wired and wireless adapter. Please select Wired net-
work adaptor manually.
●Wireless connection: Check that wireless Access Point is
broadcasting preferred wireless network SSID AND that PC’s
wireless network adaptor is working
1
2
3
4
5
Tips:
●Log onto your PC with administrator's privileges enabled.
●If Center/ Station’s IP configuration is not in the default range (Subnet mask:
255.255.0.0; IP address: 172.31.x.x). Select Connection Wizard >Custom
Mode. Input Center/Station’s current IP configuration as prompted. Press the
MENU button and select Information >Ethernet to check IP configuration.
●For Windows®XP SP2 users, make sure your Windows Firewall has been
turned off by clicking Start >Control Panel >Security Center >
Windows Firewall >Off (Visit www.microsoft.com for more details).
●If some of the WADM functions cannot be used, it might be because
your anti-virus software blocked them. It is recommended to turn off
your anti-virus software temporarily.
●When WADM is running, Internet access may be disabled. Close WADM to
restore access.
未标题-1 5 2006-11-29 5:21:08 PM

To edit track information
On the device window, click to
highlight the desired track
Right click on your mouse.
Click Track info
Click on “Title” or “Artist” to sort the
music files by track name or by Artist
1
2
C1
Use WADM
Tips:
●To select more than one file, press and hold <Ctrl> on your PC keyboard,
and click.
●To playback tracks, double click on the track to start playing.
●Always press and hold STANDBY-ON to switch the set to ECO
POWER (power-saving mode) before removing its power plug.
Transfer music files from PC to Center
Click Content management
On My Computer window, click to
highlight a desired file/folder
Drag selection to device
window
While transferring, you can add more
file/folder(s) to the transferred queue
1
2
3
3
4
未标题-1 6 2006-11-29 5:21:09 PM

Backup Center’s music library
on PC
Use WADM
C2
Click Backup content
Follow the screen instructions to
back up Center’s music files to
your PC. Backup files are named
with current date
1
2
Restore PC’s backup files to
Center
Click Restore content
Click to highlight the file to be
restored, and then click Open
1
2
Helpful hint:
●Make sure that you have adequate space to store the backup files.
●Do not delete the backup file by using Windows Explorer. If the
backup file is accidently deleted, please find out the file named
YOURMAC.inx by using your Explorer's search tool and then
delete it. Only after that you can do backup again.
About Device Configuration
In the sub-menu of Device configura-
tion, you can see System informa-
tion, manage the Network settings,
upgrade Firmware, update CD
Database and to view the device's
connection with external network.
未标题-1 7 2006-11-29 5:21:11 PM

Check you have installed Philips
Media Manager (PMM) on PC
To launch PMM, double click the
desktop icon if it is created
The first time you launch PMM,
click Add Music >Add Files or
Folders to specify music folders
on your PC
Center/Station:
Press SOURCE, and then
select preferred music server
1
2
3
4
W©Royal Philips Electronics N.V. 2006
All rights reserved.
3141 075 21491
www.philips.com
ENG
PDCC-2006
Use UPnP
C3
Need help?
Online
Go to www.philips.com/support
SOURCE
SOURCE
Gracenote and CDDB are registered trademarks of Gracenote.The Gracenote logo and
logotype, and the “Powered by Gracenote” logo are trademarks of Gracenote.
Tips:
●UPnP device may not necessarily be a PC but any content serving
device.
●If UPnP device is not detected after 5 minutes, powering it off and
on again might re-establish a faster connection.
未标题-1 8 2006-11-29 5:21:13 PM