Philips 27PC4326/37B User manual

ANT.
AUDIOOUTAUDIOOUT
COAXIALCOAXIAL
IN
OUT
OR
3
CABLE BOX
CABLE TV SIGNAL
RF COAXIAL
CABLE
ANT.
4
ANT.
ANTENNA or
CABLE TV SIGNAL
2
1Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
2If you do not have a Cable Box, simply connect your Antenna or Cable TV signal directly to the ANT. (enna)
jack on the rear of the TV/VCR/DVD.
3If you do have a Cable Box or Satellite Receiver, first connect the Cable TV or Satellite signal to the IN jack
on the Cable Box or Satellite Receiver. Then, use an RF coaxial cable (not supplied) to connect the OUT
jack of the Cable Box or Satellite Receiver to the ANT. (enna) jack on the TV/VCR/DVD. To view any channel,
set the TV/VCR/DVD to the output channel of the Cable Box or Satellite Receiver (channel 3 or 4). Then, select channels at
the Cable Box or Satellite Receiver.
4When all connections are complete, plug the power cord of the TV/VCR/DVD into an active power
outlet.
5Press STANDBY-ONyon the TV/VCR/DVD or its remote to turn on the unit.
There are many ways to connect your new TV/VCR/DVD to your other equipment. This Quick Start Guide
shows the easiest, most common connections for the TV/VCR/DVD.
27PC4326
Printed in Malaysia
8239 300 47441
1EMN21841
T3221UB*****
T3221UB_QSG_EN 5/8/06 7:18 PM Page 1

123
456
STANDBY-ON OPEN/CLOSE
MODE
SELECT
DISPLAY
CH. VOL.
MUTE
MENU
PICTURE
/SLEEP
Quick Start Guide (cont’d)
Quick Start Guide (cont’d)
Detailed playback features and additional functions are described in the
accompanying user manual.
Watching TV
1Press STANDBY-ONyto turn on the TV/VCR/DVD. The red VCR/TV light
will appear.
2This unit memorizes TV channels when you connect an Antenna or Cable TV signal
as described in this Quick Start Guide.
To watch TV, use CH. ▲/▼to select memorized channels. If a channel is skipped,
use the Number buttons to select it.To update your channels later, refer to the user
manual.
3Press VOL. X/Yto adjust the volume.
Playing a Videotape
1With the unit on, press SELECT to put the unit in TV/VCR mode. The red
VCR/TV light will appear.
2Insert a videotape in the cassette compartment. If playback does not start
automatically, press PLAY B.
3Press STOP Cto stop playback.
Playing a DVD
1With the unit on, press SELECT repeatedly to put the TV/VCR/DVD in
DVD mode. The green DVD light will appear on the front of the TV/VCR/DVD.
2Press OPEN/CLOSE Ato open the disc tray.
3Place a disc into the tray, with the label facing up and the shiny side facing
down.
Playable Discs
The TV/VCR/DVD will play the following discs.
Windows Media is a trademark of Microsoft Corporation.
DVDs must have a Region Code of ALL regions or Region 1.
DVDs must be recorded in the NTSC Color System.
1
ALL
VOLUME 20
PLAY
HG
STOP
RETURN
MODE
SELECT
DISPLAY
CH. VOL.
MUTE
DISC SET-UP
MENU
SLOW PAUSE
TITLE
ENTER
PICTURE
/SLEEP
1
2
3
2
1
3
4Press PLAY B.The tray will close and playback will begin. If playback does
not start automatically, press PLAY Bagain.
If a DVD menu appears instead, use KLs B,ENTER or Number buttons to
choose features or start playing from the menu.
5Press STOP Cto stop playback.
is a trademark of DVD Format/Logo Licensing Corporation.
123
456
789
0
+10
+100
CLEAR
REC MODE REC
PLAY
HG
STOP
RETURN
MODE
SELECT
DISPLAY
CH. VOL.
MUTE
DISC SET-UP
MENU
SLOW PAUSE
TITLE
STANDBY-ON OPEN/CLOSE
ENTER
PICTURE
/SLEEP
4
2
1
5
T3221UB_QSG_EN 4/6/06 1:09 PM Page 2