Philips Magnavox PR0935B1 User manual

AUDIO VIDEO EARPHONE MENU VOLUME CHANNEL POWER
TABLE OF CONTENTS
12 1
2
3
4
5
6
7
8
9
10
11
COLOR TELEVISION
AND
REMOTE CONTROL
PR0935B1
Owner’s Manual
FEATURES
•Infrared Remote Control operates your
TV and helps you set up on-screen features.
•Standard Broadcast (VHF/UHF) or
Cable TV (CATV) channel capability
•Auto Install quickly and easily selects sta-
tions available in your area.
•Sleeptimer automatically turns off the TV
at preset times.
•Language Selection allows you to choose
English or Spanish on-screen menus.
•Automatic Shut Off turns off the TV after
15 minutes when it is on a channel that is
not receiving a broadcast signal (for exam-
ple, if a station has gone off the air for the
night).
•FM Mode allows you to listen to the FM
radio.
Getting Started
Warning/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Hooking Up Your TV . . . . . . . . . . . . . . . . . . . . . . . . .2-3
VCR Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Power Cord Connections . . . . . . . . . . . . . . . . . . . . . . .4
Audio/Video In Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Auto Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Basic TV and Remote Control Operation . . . . . . . . . . .5
Features
Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Sleeptimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Picture Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
FM Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
General Information
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
For Customer Use
Enter below the Serial Number and the Model Number
of your television (located on the back of the TV). Keep
this information for future reference.
Model No. __________________________
Serial No.___________________________
Printed in Malaysia - 1 - IB8220E001 / 0EMN01693 / L0942UC ★★★★★
Federal Communications Commission
Warning: Any unauthorized changes
or modifications to this equipment
void the user’s authority to operate it.
Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the
Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Return your Warranty Registration card today to ensure you receive
all the benefits you’re entitled to.
Congratulations on your purchase, and welcome to the “family!”
Dear PHILIPS MAGNAVOX product owner:
Thank you for your confidence in PHILIPS MAGNAVOX. You’ve selected one of the best-built, best-backed products
available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.
As a member of the PHILIPS MAGNAVOX “family,” you’re entitled to protection by one of the most comprehensive warranties and outstand-
ing service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories
from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome–and thanks for investing in a PHILIPS MAGNAVOX product.
Sincerely,
Robert Minkhorst
President and Chief Executive Officer
Know these
safetysymbols
tThis “bolt of lightning” indicates uninsulated material within your unit which may cause an electrical
shock. For the safety of everyone in your household, please do not remove product covering.
sThe “exclamation point” calls attention to features for which you should read the enclosed literature
closely to prevent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot and fully insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne cor-
respondante de la prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Warranty
Verification
Registering your product within 10 days con-
firms your right to maximum protection
under the terms and conditions of your
PHILIPS MAGNAVOX warranty.
Owner
Confirmation
Your completed Warranty
Registration Card serves as
verification of ownership in the
event of product theft or loss.
Model
Registration
Returning your Warranty Registration Card
right away guarantees you’ll receive all
the information and special offers which you
qualify for as the owner of your model.
P.S. Remember, to get the most from your PHILIPS MAGNAVOX product, you must return your
Warranty Registration Card within 10 days. So please mail it to us right now!
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
Hurry!
Visit our World Wide Web Site at http://www.philipsmagnavox.com
This manual, your new product, and the packaging
contain materials that can be recycled and reused.
Specialized companies can recycle your product to
increase the amount of reusable materials and to min-
imize the amount that needs to be disposed properly.
Your product uses batteries that should not be
thrown away when depleted but should be disposed
as small chemical waste.
Please find out about the local regulations on disposal
of your old product, batteries, manual, and packaging
whenever you replace existing equipment.
This owner’s manual is
made of recycled paper.
Copyright 2000 by Philips Consumer Electronics. All rights reserved.

ANT. IN
AC 120V
OR
OR
DC 13.2V
ANT. IN
AC 120V
OR
UHF
VHF
300‰
75-300 ‰ ADAPTOR
DC 13.2V
HOOKING UPYOUR TV
Acombination antenna or a rod antenna (supplied)
receives normal broadcast
channels (VHF 2-13 and UHF
14-69). Your connection is easy
since there is only one 75Ω
(ohm) antenna jack on the
back of your TV - and that’s
where the antenna goes.
ANTENNA
COMBINATION UHF/VHF To set the
TV to select only
the channel num-
bers in your area,
see Auto Install on
page 5.
A second antenna
hole is provided at
the bottom left cor-
ner of the back of
the TV. This hole
may be useful if the
TV is mounted
beneath a cabinet or
in a similar location.
SMART
HELP
If you install a rod
antenna (supplied), push the
base of the antenna into the
antenna hole.
If your antenna has a
round connector (75Ω),
then you're ready to connect it
to the TV.
If your antenna has flat
twin-lead wire (300Ω), you
first need to attach the antenna
wires to the screws on a 300
to 75Ωadaptor.
Push the round end of
the adaptor (or cable or
rod antenna) onto the
ANT(enna) IN jack on the
back of the TV. If the round
end of the adaptor or cable is
threaded, screw it down tight.
You may have two separate antennas. One antenna is
for VHF channels (2-13) and
the other antenna is for UHF
channels (14-69).
For homes with separate
UHF/VHF antennas, you will
need an optional combiner
before you can connect the
antennas to the TV.
SEPARATE UHF/VHF
300 to 75Ω
Adaptor
Combination
VHF/UHF
Antenna
(Outdoor or
Indoor)
Twin-lead
Wire
Round Cable
75ΩBack of TV
Back of TV
U/V Combiner
(optional)
75-300ΩAdaptor
Outdoor UHF Antenna
(Twin-lead 300Ω)
Outdoor VHF
Antenna
(Twin-lead 300Ω)
Twin-lead
Wire
Push the round end of the
combiner onto the ANT(enna)
IN jack on the back of the TV.
Attach the separate
UHF and VHF antennas to
the correct screws on the
combiner.
Round
End
Outdoor VHF
Antenna
(Round cable 75Ω)
- 2 -
To order
any optional
accessory, contact
your dealer. Or,
call 1-800-851-8885
and refer to the fol-
lowing part num-
bers to order.
• UHF/VHF
Combiner:
4835 466 97016
• 75-300Ω
Adaptor:
M61009
• 300-75Ω
Adaptor:
4835 218 27003
SMART
HELP
If you installed a rod
antenna, extend the antenna
and adjust its length, direction,
and angle for the clearest pic-
ture.
Round Cable of
the Rod Antenna
Rod Antenna
(supplied)
Antenna Hole

ANT. IN
AC 120V
IN
OUT
OR
DC 13.2V
Your Cable TV signal may be a single (75Ω) cable or a
Cable Box installation. In either
case, the connection to the TV
is very easy.
CABLE TV
CABLE/CABLE BOX If you do not have a
Cable Box, then you're ready
to connect your Cable TV sig-
nal to the TV.
If you have a Cable Box:
Connect the Cable TV signal
to the IN jack on the Cable
Box.
If you do not have a
Cable Box, connect the
Cable TV signal directly to the
ANT(enna) IN jack on the TV.
If you have a Cable Box:
Use a coaxial cable to connect
the OUT jack of the Cable Box
to the ANT(enna) IN jack on
the TV.
NOTE: The coaxial cable
might be supplied by the Cable
TV company.
Back of TV
Coaxial cable
Cable Box
To select
only the channels on
your Cable system,
see Auto Install
(page 5).
If you use a Cable
Box, set the TV to
the same channel as
the CH 3/4 switch
on the back of the
Cable Box and
select channels at
the Cable Box.
SMART
HELP
Cable TV Company
Cable TV Signal (75Ω)
Note to the Cable TV System Installer: This reminder is provided to
call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding - in
particular, specifying that the cable ground shall be connected to the ground-
ing system of the building, as close to the point of cable entry as possible.
HOOKING UPYOUR TV (CONT’D)
ANT. IN
AC 120V
OUT TO TV
IN FROM ANT.
DC 13.2V
The basic Antenna/Cable to VCR to TV connection is
shown here. If you have a Cable
Box, refer to the VCR owner’s
manual for details.
VCR TO TV
BASIC CONNECTION Connect your
Antenna or Cable signal to
the IN FROM ANT(enna)
jack on the VCR.
Connect a coaxial
cable to the OUT TO
TV jack on the VCR
and to the ANT(enna)
IN jack on the TV.
The coaxial cable may be
supplied with the VCR.
Coaxial cable
Outdoor
VHF/UHF
Antenna
300 to 75Ω
Adaptor
Cable TV signal
Back of TV
Refer to the VCR
owner's manual for other
possible connections and for
operating details.
VCR
- 3 -

- 4 -
HOOKING UPYOUR TV (CONT’D)
For more convenient tape playback from a camcorder
or VCR, use the AUDIO and
VIDEO In jacks on the front of
the TV. These easily accessible
jacks allow quick connections
between the TV and the VCR
or camcorder.
USING THE FRONT AUDIO/VIDEO INJACKS
A UDIO /V IDEO I N J ACKS
Connect a video
cable (not supplied) to the
VIDEO OUT jack of the
camcorder/VCR and to the
VIDEO In jack on the front
of the TV.
When you are
finished watching
the tape, press the
TV/AUX button on
the TV remote con-
trol to return to
viewing normal TV
channels.
If the VCR or cam-
corder has Right
and Left AUDIO
OUT jacks, you will
need a “Y” connec-
tor cable in order
to connect the cam-
corder/VCR to the
TV. Or, check the
owner’s manual of
the camcorder or
VCR. It may explain
how to connect to
a TV that has a sin-
gle AUDIO In jack.
SMART
HELP
Press the TV/AUX but-
ton on the TV remote con-
trol to put the TV in
Auxiliary In mode.
Connect an audio cable
(not supplied) to the
AUDIO OUT jack of the
camcorder/VCR and to the
AUDIO In jack on the
front of the TV. Turn on the cam-
corder/VCR and press the
PLAY button on the cam-
corder/VCR.
When you are finished
watching the tape, press
the STOP button on the
camcorder/VCR.
VIDEO OUT AUDIO
Audio Cable (white) from
AUDIO OUT to AUDIO In
Video Cable (yellow) from
VIDEO OUT to VIDEO In
AUDIO VIDEO
EARPHONE
MENU VOLUME
ANT.IN
AC120V
DC13.2V
AC 120V
Follow these instructions to connect the TV to AC power.
POWER CORD CONNECTIONS
Connect the AC
power cord to the AC
120V jack on the back of
the TV.
Plug in the power
cord at the wall outlet.
AC CORD
CONNECTION
Usually, the supplied indoor rod antenna provides ade-
quate reception. But when you
want to watch TV outdoors or
in a vehicle, use a mobile
antenna (not supplied) or an
indoor dipole antenna (not sup-
plied) and a car battery cord
(supplied) to get good recep-
tion.
Refer to the Owner's
Manual included with your
mobile antenna to make a con-
nection similar to this one.
MOBILE
CONNECTION Remember,
use only the
supplied car battery
cord.
Make sure the ciga-
rette lighter jack is
free of ashes and
other debris.
Make sure you push
the car battery
cord’s plug com-
pletely into the cig-
arette lighter jack.
SMART
HELP
If both the
car battery cord
and the AC cord
are connected,
standard electrical
power may be
unavailable.
Disconnect the car
battery cord and
the AC cord from
the TV and leave
the TV alone for at
least 10 minutes.
Reconnect only the
AC power cord,
then turn on the
TV.
SMART
HELP
ANT.IN
AC 120V
DC 13.2V
ANT. IN
DC 13.2V
Mobile Antenna
(not supplied)
To the
Vehicle’s
Cigarette
Lighter jack Car battery cord
(supplied)
Back of TV
Make sure your vehicle
has a 13.2-volt, negative
ground electrical system.
Connect one end of the car
battery cord to the DC
13.2V jack on the back of
the TV. Then connect the
other end of the car bat-
tery cord to the cigarette
lighter jack in your vehicle.
Mobile connection
• Do not watch TV while driving.
• Always unplug the car battery cord from the ciga-
rette lighter jack before you unplug it from the TV.
• If you use the TV with the vehicle’s engine off,
recharge the vehicle’s battery every four hours or
as often as necessary. Unplug the car battery cord
from the cigarette lighter jack when you finish
using the TV.
• When you use the TV with the car battery cord,
noise may appear on the TV screen.
• Please do not use this TV in high temperature con-
ditions.
Fuse Replacement (Car Battery Cord)
If the TV does not have power when connected properly in your vehicle, you may need to replace the fuse in the
car battery cord.
Use only a 5-amp, 250-volt, fast blow fuse, which is available at an electronics retailer.
1)To remove the old fuse, unscrew the red cap from the end of the cord. Place
your fingers on the grooved part of the cap and turn the cap counter-clockwise.
2)When the cap is removed, the red cap and the silver tip will be loose. The fuse
will be loose inside the end of the cord.
3)Remove the old fuse and insert a new fuse.
4)Replace the red cap and the silver tip. The fuse will tighten into place as you
screw on the cap, turning the cap clockwise. (The end of the fuse will fit into the
silver tip, which is in the center of the red cap when tightened.)

- 5 -
AUDIO VIDEO
EARPHONE
MENU VOLUME CHANNEL POWER
MENU VOLUME CHANNEL POWER
SETTING UP AND USING YOUR TV
Be sure to connect the
TV power cord.
Press the POWER button to
turn ON the TV.
Press the VOLUME
▲/▼buttons to adjust
the sound level.
Press the CHAN-
NEL ▲/▼ buttons to
select available TV chan-
nels.
TELEVISION
The current
channel number
will appear briefly
when the TV is first
turned ON and with
channel changes. To
display the channel
number for five sec-
onds, press the STA-
TUS/EXIT button on
the remote control.
You can turn on the
TV by pressing the
CHANNEL ▲/▼
buttons on the front
of the TV. The
CH(annel) ▲/▼but-
tons of the remote
control will not turn
on the TV power.
SMART
HELP
AUTO INSTALL
321
654
987
0
POWER
STATUS/EXIT
ALT. CH
FM
SLEEPTV/AUX
MENU
MUTE
VOL.VOL.
CH.
CH.
REMOTE
T
o load the batteries into the
remote:
1. Slide off the battery
compartment lid on the
bottom of the remote
control.
2. Insert two AA batter-
ies (supplied) into the
battery compartment
as indicated inside the
compartment. Batteries
installed incorrectly may
damage the remote con-
trol.
3. Replace the lid.
Point the remote control
toward the remote sensor on the TV
when operating the TV with the
remote.
MENU Button
Press to access the on-screen menu.
Press repeatedly to remove the menus.
Press the CH(annel) o/pbuttons to
select an item in the menu. Press the
VOL(ume) B/{buttons to adjust an
item in the menu or to advance to the
next menu.
Number Buttons
Press to select channels.
• Cable Users
Enter channel numbers as a two-digit
number for the quickest results. For
example, to select channel 6, press 0,6.
If you only press the Number 6 button,
channel 6 will be selected after a brief
delay. (There also may be a brief delay
when you select channels 10, 11, and
12.) If you want to select channels 100
and above, enter channel numbers as a
three-digit number. For example, to
select channel 117, press 1, 1, 7.
• Antenna Users
Enter channel numbers as a two-digit
number for the quickest results. You
may only select channels 2-69. For
example, to select channel 5, press 0,5.
If you only press the Number 5 button,
channel 5 will be selected after a brief
delay.
MUTE Button
Press to turn OFF the sound in TV mode and FM
mode. Press again to restore the sound. (Mute will
be cancelled if you press the VOL(ume) Bbutton to
increase the volume.)
CH(annel) ▲/▼Buttons
Press to scan through available channel numbers. Press
to select an item in the on-screen menu. When in FM
mode, press to select an FM radio station.
STATUS/EXIT Button
Press to see the current channel number on the TV
screen. Press to remove the on-screen menu.
You also may remove the menu by pressing the
CH(annel) ▲/▼buttons to select EXIT, then press-
ing the VOL(ume) B/{buttons. (You may need to
select EXIT repeatedly to completely remove all of
the menus.) Or, press the MENU button repeatedly
to remove all the menus.
SLEEP Button
Press to set the TV to turn itself OFF automatically.
Details are on page 6.
POWER Button
Press to turn the TV ON and OFF.
ALT. CH (Alternate Channel) Button
Press to return to the TV channel you were viewing
immediately before switching to your current channel.
Battery
Compartment
Lid
Battery
Compartment
F
ollow these steps to quickly
add area channels into the
TV’s memory.
Note:
•You can connect earphones (not supplied)
to the EARPHONE jack on the front of
the TV for private, personal listening.
Press the CH(annel)
▲/▼ buttons to select
SETUP. Then, press the
VOL(ume) Bor {button
to continue.
Press the CH(annel) ▲/▼
buttons to select AUTO
INSTALL.
Then, press the VOL(ume) B
or {button to enter AUTO
INSTALL, which will set up the
channels.
When setup is complete, the
SETUP menu will appear for a
moment, then the lowest stored
channel will be selected. Now,
when you press the CH(annel)
▲/▼ buttons, you will only scan
through channels that have been
memorized and are available.
Press the MENU button
to display the TV’s on-screen
menu.
Press the CHANNEL ▲/▼
buttons to select an item in the
menu.
Press the VOLUME ▲/▼but-
tons to adjust an item in the
menu or to advance to the next
menu.
Note: To remove the menu,
press the CHANNEL ▲/▼but-
tons to select EXIT. Then, press
the VOLUME ▲or ▼button.
(You may need to select EXIT
repeatedly to completely remove
all of the menus.)
Or, press the MENU button,
repeatedly if necessary, to
remove the on-screen menu.
Press the POWER
button to turn ON the TV.
Press the MENU but-
ton. The main menu appears
on the TV screen.
321
654
987
0
POWER
STATUS/EXIT
ALT. CH
FM
SLEEPTV/AUX
MENU
MUTE
VOL.VOL.
CH.
CH.
Remote
Sensor
VOL(ume) B/{Buttons
Press to adjust the TV sound level in TV mode and
FM mode. Press to adjust an item in the on-screen
menu or to advance to the next menu.
EXIT B
LANGUAGE ENG
AUTO INSTALL B
CHANNEL EDIT B
FM ANTENNA INT
AUTO STORE 1
FM Button
Press to select FM mode. Press again to return to TV
mode.
SETUP B
EXIT B
BRIGHTNESS 24
COLOR 31
PICTURE 31
TV/AUX Button
Press to select A/V IN mode (for viewing tape play-
back at the TV from a VCR or camcorder). Press again
to return to another TV channel.
VOLUME 13
SLEEPTIMER OFF
SETUP B
EXIT B
BRIGHTNESS 24

- 6 -
FEATURES
CHANNEL EDIT makes it easy for you to add other
channels or drop unwanted
channels from the TV’s memory.
CHANNEL EDIT Press the MENU but-
ton, then press the
CH(annel) ▲/▼buttons to
select SETUP.
Press the VOL(ume)
Bor {button to continue
to the SETUP menu.
Press the CH(annel)
▲/▼buttons to select
CHANNEL EDIT.
Press the VOL(ume)
Bor {button to continue
to the CHANNEL EDIT
menu.
CHANNEL will be selected.
While CHANNEL is
selected, press the
VOL(ume) Bor {button
or the Number buttons to
select the channel you
want to add or skip.
Press the CH(annel)
▲/▼buttons to select
SKIPPED.
Then,
press the VOL(ume)
Bor {button to set
SKIPPED to YES (if you
want to skip past the channel
when using the CH(annel)
▲/▼ buttons) or NO (if you
want the channel to be avail-
able when you are using the
CH(annel)
▲/▼buttons ).
Press the
STATUS/EXIT button
when you are finished.
Have you ever fallen asleep in front of the TV, only to
have it wake you up at 2 a.m.
with a test pattern screeching
in your ears? Well, your TV
can save you all that trouble by
automatically turning itself off.
Set the Sleeptimer simply by
pressing the SLEEP button, or
you may use the on-screen
menu.
Press the SLEEP button
repeatedly to pick the
amount of time (15 minutes to
120 minutes) before the TV
turns itself off. The length of
time will appear on the screen
for five seconds.
One minute before the TV
shuts itself off, the seconds will
count down on the screen.
To see how
many minutes remain
before the TV shuts
itself off, press the
SLEEP button once or
press the
STATUS/EXIT button.
To cancel a
SLEEPTIMER setting,
press the SLEEP but-
ton twice so that OFF
appears on the screen.
SMART
HELP
SLEEPTIMER
321
654
POWER
STATUS/EXIT
SLEEPTV/AUX
MENU
MUTE
VOL.VOL.
CH.
CH.
There are two ways to adjust
the TV’s volume. Follow
these steps to adjust the volume
using the on-screen menu.
Or, you can adjust the volume
using the VOL(ume) B/sbut-
tons on the remote control or
the VOLUME o/pbuttons on
the TV.
Press the MENU but-
ton. Press the CH(annel)
▲/▼buttons to select
VOLUME. Then, press the
VOL(ume) B/{buttons to
adjust the volume level.
Press the
STATUS/EXIT button to
remove the menu. The Volume indi-
cator should appear on
the screen when you
adjust the volume.
The simplest way to
adjust the volume is by
pressing the VOL(ume)
B/sbuttons.
The TV must be set to an
active channel in order
for the Volume control
to work properly.
SMART
HELP
VOLUME
321
654
POWER
STATUS/EXIT
SLEEPTV/AUX
MENU
MUTE
VOL.VOL.
CH.
CH.
VOLUME 13
SLEEPTIMER OFF
SETUP B
EXIT B
BRIGHTNESS 24 LANGUAGE ENG
AUTO INSTALL B
CHANNEL EDIT B
FM ANTENNA INT
EXIT B
EXIT B
CHANNEL 10
SKIPPED YES
SHARPNESS 34
TINT -05
VOLUME 13
SLEEPTIMER OFF
SETUP B
EXIT B
CHANNEL 18
SKIPPED YES
321
654
987
0
POWER
STATUS/EXIT
ALT. CH
FM
SLEEPTV/AUX
MENU
MUTE
VOL.VOL.
CH.
CH.
Follow these steps to change the language of
the on-screen menus.
Press the MENU but-
ton. Press the CH(annel)
▲/▼buttons to select
SETUP, then press the
VOL(ume) Bor {button
to continue. LANGUAGE
will be selected.
LANGUAGE
Press the VOL(ume)
Bor {button to select
ENG for English menus or
ESP for Spanish menus.
Press the
STATUS/EXIT button.
321
654
987
POWER
STATUS/EXIT
SLEEPTV/AUX
MENU
MUTE
VOL.VOL.
CH.
CH.
If you accidentally
chose Spanish and need
English:
1) Press the MENU but-
ton.
2) Press the CH(annel)
▲/▼buttons to select
INSTALACION, then
press the VOL(ume) B
or {button to continue.
3) IDIOMA will be select-
ed. Press the VOL(ume)
Bor {button to have
ENG appear beside LAN-
GUAGE.
4) Press the
STATUS/EXIT button.
SMART
HELP
SETUP B
EXIT B
BRIGHTNESS 33
COLOR 29
PICTURE 36
FM ANTENNA INT
EXIT B
LANGUAGE ENG
AUTO INSTALL B
CHANNEL EDIT B
ANTENA FM INT
SALIDA B
IDIOMA ESP
AUTOPROGRAMACION B
REVISAR CANAL B
FM ANTENNA INT
EXIT B
LANGUAGE ENG
AUTO INSTALL B
CHANNEL EDIT B
Press the CH(annel)
▲/▼buttons to select SLEEP-
TIMER.
Press the VOL(ume)
B/{buttons repeatedly to set
the amount the time or to
select OFF.
Press the STATUS/EXIT
button to remove the menu.
Press the MENU button.
OR
_

FEATURES (CONT’D)
Coaxial Cable - A single cable with a metal connector that screws (or pushes) direct-
ly onto a 75Ωjack (ANT(enna) In jack) on the Television or VCR.
Display - Allows the user to quickly confirm what channel number is being viewed
currently.
Jack Panel - The area on the back of the TV.
Menu - An on-screen listing of features that are available for adjustments.
On-screen Displays (OSD) - The wording or messages that help you set up features
(color adjustment, channel setup, etc.).
Programming - Adding or deleting channels in the television’s memory. The televi-
sion “remembers’’ only the locally available or desired channel numbers and skips over
any unwanted channel numbers.
Remote Sensor - An area on the front of the TV through which remote control sig-
nals are received.
Twin Lead Wire - The two-strand 300Ωantenna wire used with many indoor and
outdoor antenna systems. In many cases, this type of antenna wire requires an addition-
al adaptor (or balun) in order to connect to the ANT(enna) In jack on the TV.
Volume Indicator - Appears on the TV screen when you adjust the volume.
GLOSSARY
- 7 -
To adjust your TV picture controls, select a channel
and follow these steps.
PICTURE
ADJUSTMENTS Press the MENU
button, then press the
CH(annel) ▲/▼buttons to
select a control.
Press the VOL(ume)
B/{buttons to adjust the
selected picture control.
BRIGHTNESS Press the VOL(ume) B/{buttons
until the darkest parts of the picture are as bright as
you prefer.
COLOR Press the VOL(ume) B/{buttons to add
or reduce color.
PICTURE Press the VOL(ume) B/{buttons until
the lightest parts of the picture show good detail.
SHARPNESS Press the VOL(ume) B/{buttons
to improve detail in the picture.
TINT Press the VOL(ume) B/{buttons to obtain
natural skin tones.
Press the
STATUS/EXIT button.
321
654
987
0
POWER
STATUS/EXIT
ALT. CH
FM
SLEEPTV/AUX
MENU
MUTE
VOL.VOL.
CH.
CH.
SETUP B
EXIT B
BRIGHTNESS 24
COLOR 31
PICTURE 31
This feature enables you to receive FM radio stations.
FMMODE Press the FM button on
the remote control to
select the FM mode. The
current radio frequency
appears on the TV screen.
The radio frequency indicator
will move or shift while on the
TV screen during normal FM
mode operation.
If you receive a
weak radio signal, you
may switch between the
internal (INT) or exter-
nal (EXT) antennas by
following the steps
below.
1) Press the FM button
to exit the FM mode
and return to TV mode.
2) Press the MENU but-
ton.
3) Press the CH(annel)
▲/▼buttons to select
SETUP. Then, press the
VOL(ume) Bor {but-
ton to continue.
4) Press the CH(annel)
▲/▼buttons to select
FM ANTENNA. Then,
press the VOL(ume) B
or {button to select
INT or EXT.
5) Press the
STATUS/EXIT button.
SMART
HELP
FMMODE
Press the CH(annel)
▲/▼buttons until your
desired radio frequency
appears.
FM 88.0MHz
321
654
987
0
POWER
STATUS/EXIT
ALT. CH
FM
SLEEPTV/AUX
MENU
MUTE
VOL.VOL.
CH.
CH.
To exit FM mode and
return to TV mode, press
the FM button.
FM Mode
• If you turn off the TV in FM mode, the TV will be in TV
mode when you turn on the TV again.
• You may get better FM reception by repositioning the TV.
• The TV’s FM radio has a built-in antenna with a band
range of 88.0 ~ 108.0MHz.
• The radio frequency will not appear on the TV screen if
the volume is muted.

Please make these simple checks before calling for ser-
vice. These tips can save you
time and money since charges
for TV installation and adjust-
ment of customer controls are
not covered under your
warranty.
TROUBLESHOOTING
No Power
• Check the TV power cord.
• Make sure the power outlet is not on a
wall switch.
No Picture
• Check antenna/cable connections. Is the
antenna or cable properly secured to the
ANT(enna) IN jack on the TV?
GENERAL INFORMATION
No Sound
• Check the VOL(ume) B/{buttons.
• Check the MUTE button.
Wrong Channel
• Repeat channel selection.
• Add desired channel numbers into the
TV memory. See page 6 for details.
TIPS
Philips Service Solutions Group, P.O. Box 2976, Longview, Texas 75606
[phone]
Cleaning and Care
• Unplug the TV before cleaning.
• Avoid using anything abrasive that could scratch the screen.
• Wipe the TV screen with a clean cloth dampened with water.
• Gently wipe cabinet surfaces with a clean cloth or sponge dampened with
cool clear water. Use a clean dry cloth to dry the wiped surfaces.
• Occasionally vacuum the ventilation holes or slots in the cabinet back.
• Never use thinners, insecticide sprays, or other chemicals on or near the
cabinet.
ALT. CH Button . . . . . . . .5
Antenna Connections . . .2-3
Auto Install . . . . . . . . . . . .5
Batteries . . . . . . . . . . . . . .5
Cable TV Connections . . . .3
Channel Edit . . . . . . . . . . .6
Channel Setup . . . . . . . . . .5
CH(annel) ▲/▼ Buttons . .5
Coaxial Cable . . . . . . . . . . .3
Controls/Remote . . . . . . . .5
Controls/TV . . . . . . . . . . . .5
Earphone jack . . . . . . . . . .5
Features . . . . . . . . . . . . . . .1
FM Button . . . . . . . . . . .5, 7
Glossary . . . . . . . . . . . . . .7
Language . . . . . . . . . . . . . .6
MENU Button . . . . . . . . . .5
MUTE Button . . . . . . . . . . .5
Number Buttons . . . . . . . .5
Picture Adjustments . . . . . .7
POWER Button . . . . . . . . .5
Power Cord Connections .4
Precautions . . . . . . . . . .1, 8
Remote Control . . . . . . . .5
Remote Sensor . . . . . . . . .5
Safety Notes . . . . . . . . . . .1
Service . . . . . . . . . . . . . . . .8
SLEEP Button . . . . . . . . .5, 6
Sleeptimer . . . . . . . . . . . . .6
STATUS/EXIT button . . . .5
Tips . . . . . . . . . . . . . . . . . .8
TV/AUX Button . . . . . . . . .5
VCR Connections . . . . . . .3
Volume . . . . . . . . . . . . . . .6
VOL(ume) B/{Buttons 5-6
Warranty . . . . . . . . . . . . . .8
INDEX
WARRANTY
RENEWED 90 DAY LIMITED WARRANTY
- 8 -
Power Failure
•When you disconnect the power
cord from the AC outlet, or if you
have a power failure, the
Sleeptimer will be cancelled. You
may reset the Sleeptimer.
Remote Doesn't Work
• Check batteries. Replace with AA Heavy
Duty (Zinc Chloride) or Alkaline
batteries if necessary.
•Clean the remote and the remote sensor
on the TV.
•Check the TV power cord.
As an ENERGY STAR®
Partner, Philips
Consumer Electronics
Company has determined that this
product meets the ENERGY STAR®
guidelines for energy efficiency.
ENERGY STAR®is a U.S. registered
mark.
Using products with the ENERGY
STAR®label can save energy. Saving
energy reduces air pollution and
lowers utility bills.