Philips Prestigo SRT9320/27 User manual

Prestigo SRT9320
EN User Manual
Register your product
and get support at
www.philips.com/welcome

2EN
English
Table of contents
1 Your Prestigo 3
1.1 What’s in the box? 3
2 Getting started 3-6
2.1 Charging the battery 3-4
2.2 Setting up the remote control 4-5
2.3 Exit Setup mode 6
3 Using the remote control - Basic operation 6-7
3.1 Selecting devices 6-7
4 Extra possibilities - Advanced setup 7-20
4.1 Entering Setup mode 7
4.2 Setting up devices 8-9
4.3 Setting up activities 9-12
4.4 Selecting activities (use mode) 12-13
4.5 Setting up favorites 13-15
4.6 Selecting favorites (use mode) 15
4.7 Reconfiguring buttons 15-18
4.8 Reconfiguring the Power / AV buttons 18-19
4.9 Adjusting system settings 19
4.10 Installing Philips PrestigoSync software 19-20
5 Frequently asked questions 20-22
6 Technical specifications 22
7 Service and support 22-24
7.1 Need help? 22
7.2 Information to the consumer 23-24
Equipment list 25
Table of contents
IR transmitter
Display /
touchscreen
- Power button
- Home / Setup button
- AV button
- Volume + / - button
- Teletext button
(Europe / Australia)
Previous channel button (USA)
- Mute button
- Channel /
Program + / – button
- Menu button
- Back / Exit button
- Cursor buttons
- OK button
- Guide button
- Info button
IR receiver
USB port
Power supply jack
Color buttons
On / Off switch
(Rear of Prestigo)
(Bottom of Prestigo)
(Top of Prestigo)

3EN
English
1 Your Prestigo
After setting up the Philips Prestigo universal remote control you can
operate up to 20 different devices with it, use up to 20 activities and select
a total of 100 favorites.
Favorites are your favorite TV and radio channels that you can select and
watch / listen with a single button press.
Activities give you one-touch access to your home entertainment system.
During setup you can select yourself the devices you wish to operate with
the remote control (see table under chapter 2.2 ‘Setting up the remote
control’).The on-screen instructions on the remote control display help you
to easily set up and operate the remote control.
If, however, you require extra information, please consult this user manual.
It is provided to help you set up and use the remote control.
To fully benefit from the support that Philips offers, register your product at
www.philips.com/welcome
• At ‘www.philips.com/welcome’, select ‘Register my product’ and follow
the on-screen instructions for registration.
How to use this manual
When you click with the cursor on a sentence in theTable of contents you
automatically go to the right page / chapter.
When you click on a page number, reference chapter or internetsite in the
text you go there.
Clicking on the blue language tab in the right top corner brings you back to
the Table of contents.
1.1 What’s in the box
Please verify that the packaging contains the following items:
• Prestigo SRT9320 universal remote control
• User manual
• Quick Start Guide
• Customer Demonstration sheet
• Charging cable
• USB cable
• CD ROM containing Philips PrestigoSync software and user manual
• Power plug Europe + Power plug UK
Or:
• Power plug Australia
2 Getting started
2.1 Charging the battery
The remote control comes pre-installed with a rechargeable battery.
When using the remote control for the first time, make sure the battery is
fully charged. Do not disconnect the remote control from the power supply
until the battery is fully charged ( ). Charging may take up to 3 hours
and can take place with the remote control turned on or off.
With the remote control turned on you can follow the charging process on
the remote control display.
Your Prestigo

4EN
English
1Select the adapter plug for your
country and slide it over the power
plug of the charging cable.
OR:
Fold out the contact blades.
2Insert the power plug into a wall
outlet.
3Turn the protective cap, covering the
connectors, to the left.
4Insert the plug at the other end of
the charging cable into the remote
control power supply jack.
5If desired, set the On / Off switch
to the right (On).
The On / Off switch is located at the
rear of the remote control.
Use a pen or small screwdriver to
set the switch.
• The Philips Startup screen appears, followed by the Language
Selection screen.The progress animation ( ) in the top right
corner of the screen indicates the charging status.
• When the battery is fully charged the battery full icon ( )
appears at the top right corner of the screen.
Notes
• Operation time of a fully charged battery is approximately 1 month but also
depends on the intensity of usage. When the battery is almost empty the
battery low icon ( ) flashes in the top right corner of the screen.
Recharge the battery as described above.
• When the battery cannot be recharged anymore it needs to be replaced.
For this, refer to chapter 7.2.2 ‘Replacing the battery’.
2.2 Setting up the remote control
Make sure the remote control is fully charged and turned on (for this refer
to chapter 2.1 ‘Charging the battery’).
Avoid turning off the remote control with the On / Off switch at the rear
for this will shorten battery life time.
1Select your preferred language by
Setup
English
Français
Español
Deutsch
touching the language (flag) in the
Language Selection screen.
• Use the and buttons, at the bottom of the screen,
to scroll through the list of available languages.
• A welcome message appears.
Getting started

5EN
English
2Touch the button to continue
Setup
Welcome to the Prestigo setup
guide.The next steps will help you
add devices to your SRT9320.
With the button you go back
to the Language Selection screen.
3Follow the on-screen instructions to set up the remote control for all
devices you wish to operate, using the remote control.
• You can set up the remote control for any of the devices listed below,
with a maximum of 20 devices.
Device name Description
TV Traditional TV, flat screenTV and projectionTV
Set-Top Box Cable box, satellite receiver, Digital Video
Broadcasting Terrestrial device (DVB-T), IPTV,
TNT (FR), Freeview (UK)
Set-Top Box Recorder Cable box, satellite receiver, Digital Video
Broadcasting Terrestrial device (DVB-T), IPTV,
TNT (FR), Freeview (UK) with recording
capabilities (Hard Disk Drive)
DVD Player DVD player
Blu-Ray Player Blu-Ray player
DVD Recorder DVD Recorder
Hard Disk Recorder DVD / Hard Disk Drive combination, PVR,
(+HDD)DVR
VCR Video cassette player and recorder
PC Personal Computer,Windows Media Center
Game Console Game Console
MP3 Player Dock MP3 player docking station and audio-video
accessories (Switches, Apple TV, etc.)
Digital Media Receiver Digital Media Receiver, Media Adapter, Squeezebox
Receiver AV Receiver, Amplifier + Tuner combination, sound
processor
Home Theatre System HomeTheatre System, Home Entertainment
System
Audio System Audio System, AudioSet, Hifisystem
Amplifier Amplifier, Preamplifier, Active Speaker System
Radio tuner Radio Tuner, Digital Audio Broadcasting (DAB)
CD player CD player and recorder, Super Audio CD player
(SACD)
Tape Audio cassette tape player and recorder, DAT,
DCC
Minidisc Minidisc player and recorder
TV / DVD Combo TV with integrated DVD
TV / VCR Combo TV with integrated VCR
TV / VCR / DVD Combo TV with integrated VCR and DVD
DVD / VCR Combo DVD / VCR combination
Projector Video projector
Video CD / Laser Disc Video Compact Disc, Laser Disc, Karaoke
HD-DVD player High-Definition DVD player
Phono Turntable
TiVo Digital Video Recorder*
Satellite Radio Satellite Radio Receiver*
* USA only
Getting started

6EN
English
2.3 Exit Setup mode
1 To exit the initial Setup at any time,
press the HOME button.
• The message ‘Do you want to
save your settings and exit setup’
appears.
2Touch the ‘Yes’ button to exit.
• If you accidentally press the HOME
button during initial Setup, you can enter Setup mode again by touching
the ‘No’ button. Also refer to chapter 4.1 ‘Entering Setup mode’.
Notes
• In order to be able to use the remote control, it should be set up for at least
one device.
• Devices for which the remote control is set during this initial set up can be
deleted, renamed, rearranged or replaced afterwards.
For this, refer to chapter 4.2 ‘Setting up devices’.
3 Using the remote control
-Basic operation
After initial setup you can use the remote control to operate your devices.
For operation the appropriate hard buttons on the remote control can be
used as well as the touchscreen buttons that are displayed when a device
is selected.
3.1 Selecting devices
1Press the HOME button.
• The Home screen appears.
The ‘Devices’ tab is highlighted
and the devices for which the
remote control is set up are
displayed. For adding devices,
refer to chapter 4.2.‘Setting up
devices’.When more pages with devices are available the
button appears.Touch the button to go to the next page.
With the button you go back to the previous page.
2Select the desired device by
Home
Devices
TV
Set-top Box
DVD
Receiver
Activities
touching the corresponding button.
• A keypad with buttons for
Keypad
1
7
4
2
8
0
5
3
9
enter
6
Favorites
operating the selected device
appears.
• Touch the button to go to the next keypad.
With the button you go back to the previous keypad.
Using the remote control

7EN
English
3You can now operate the selected device by using the touchscreen
buttons (keypad) and the appropriate hard buttons on the remote
control.
• Touch the button to go back to the list of available devices.
• To set up the remote control for other (more) devices, refer to
chapter 4.2.1 ‘Adding devices’.
Note
If a device does not respond properly to a button command you can have the
remote control search for the button function or learn the function from the
original remote control. For this refer to chapter 4.7.4.1 ‘Searching the database’
and / or chapter 4.7.4.2 ‘Learning button functions’.
4 Extra possibilities
- Advanced setup
4.1 Entering Setup mode
When in normal operation mode, pressing the HOME button for 3 seconds
will display a toolbar.This toolbar enables you to configure the current
screen and contains the following tools:
(add): adds items (devices, activities, etc.) to the current screen.
(delete): deletes items (devices, activities, etc.) from the current
screen.
(edit): renames and reconfigures items (devices, activities, etc.).
(done): confirms settings and returns to normal operation mode.
• When more items are available than can be displayed on the screen, the
button appears.Touch the button to go to the next
list of items.With the button you go back to the previous list.
• When an item is selected on the screen, the button appears.
Press the button and use the arrows that appear to move the item
to a different position on the screen.
• Press the button to exit Setup mode at any time.
Extra possibilities

8EN
English
4.2 Setting up devices
When entering setup mode from the devices home screen, you can add,
delete, rename and rearrange devices.
1In the Home screen, touch
H
ome
Devices
WatchTV
Listen to music
Watch a movie
Play a game
Activities
the ‘Devices’ tab.
• The devices for which the
remote control is set up are
displayed on
the screen.
2Keep the HOME button pressed for
Receiver
3 seconds.
3Use the buttons in the toolbar to
add, delete and edit devices.
4Touch the button in the toolbar
when finished.
4.2.1 Adding devices
1Touch the button in the toolbar.
• The Add device screen appears.
2Select the new device you wish to set up the remote control for (add)
and follow the on-screen instructions.
3Touch the button in the toolbar when finished.
• The Home screen appears.The remote control is now set up to
operate the newly added device.
4.2.2 Deleting devices
1In the list of devices, select the device you wish to delete.
• The Delete device screen appears.
2Touch the button in the toolbar.
3Touch the ‘Yes’ button to confirm.
4Touch the button in the toolbar when finished.
• The Home screen appears.
The device is now deleted from the remote control memory.
Note
Buttons of the deleted device that are used elsewhere, e.g. in an activity or the
volume buttons will be deleted as well. Check the activities you installed and
reinstall them if necessary. For this refer to chapter 4.3 ‘Setting up activities’.
Check the volume buttons for your devices and reinstall them if necessary.
For this refer to chapter 4.2.4 ‘Copy volume buttons from another device’.
4.2.3 Renaming devices
1In the list of devices, select the device you wish to rename.
2Touch the button in the toolbar.
• The Edit device screen appears.
3Touch the ‘Rename’ button.
4Use the keyboard to enter the new name.
5Touch the ‘OK’ button when finished.
• The Setup screen appears.
6Touch the button in the toolbar.
• The Home screen appears.
The device is now stored under the new name.
Extra possibilities

9EN
English
4.2.4 Copy volume buttons from another device
When adding devices, the remote control copies the volume settings as
follows:
• If a device has its own volume buttons in the remote control database,
these volume buttons will be used.
• If a device has no volume buttons in the remote control database,
the volume buttons of another device will be used automatically.
You can change which volume buttons are used, for instance if you wish to
use the volume buttons of the Amplifier to control the volume of the
DVD player.
1In the list of devices, select the device you wish to copy the volume to.
2Touch the button in the toolbar.
• The Edit device screen appears.
3Touch the ‘Copy volume buttons’ button.
• The Copy volume screen appears.
4Follow the on-screen instructions.
5Touch the button in the toolbar when finished.
• The Home screen appears.The volume settings are now copied.
Notes
• When changing the volume settings, the default volume settings of the
remote control will be overwritten.
• Previously installed volume settings will be overwritten.
• Volume settings will be deleted when the volume source device is deleted.
• In ‘Add device’ mode, punched through volume buttons will not be available
for testing.
4.2.5 Rearranging devices
1In the list of devices, select the device you wish to rearrange.
2Touch the button in the toolbar.
3Use the arrows to move the device to the preferred position.
4Touch the button in the toolbar when finished.
• The Home screen appears.
4.3 Setting up activities
Activities enable you to turn a number of devices on and off with a single
button press while all buttons needed for operating the devices immediately
become available.
For example: touching the ‘Watch DVD’ activity can automatically turn on
yourTV, DVD player and Home Theater System, select the correct AV
inputs on yourTV and Home Theater System and displays the buttons that
can be used for operating these devices. Only the buttons that you typically
use when watching a DVD will be shown.
Start / Stop Activity macro
After selecting all desired devices for the activity, you can set up a start and
stop macro for the activity. In the start macro you define a series of button
presses that turn on your devices and select the correct input(s) when you
activate the activity. In the stop macro you define a series of button presses
that turn off your devices when you deactivate the activity.
Note that a short delay is required between each button command that is
sent, otherwise your devices might not respond properly.
Extra possibilities

10EN
English
If you do not set up start / stop macros, all devices have to be turned on /
off manually one after another.This can be easily done by pressing the ‘On’
and ‘Off’ buttons in the Power screen that appears after selecting the activity.
• Touch the ‘Yes’ button when you are asked if you wish to set up macros
and follow the on-screen instructions.
Example Start Activity macro for ‘Watch DVD’:
1Turn on TV.
- Standard delay of 0.25 seconds is automatically inserted.
2Turn on DVD.
3User-defined delay of 10 seconds to wait for the TV to turn on.
4Select input 1 on TV.
Example Stop Activity macro for ‘Watch DVD’:
1Turn off TV.
- Standard delay of 0.25 seconds is automatically inserted.
2Turn off DVD.
Tips and tricks for setting up Macros
A/V input selection
On most remote controls A/V input selection is done by cycling through the
available input sources, using the A/V button and then selecting the desired
source (cyclic input selection).
Some remote controls, however, are equipped with physical buttons
(TV, DVD, etc.) that directly select a particular input source (discrete input
selection).
In order to make your macros more reliable use discrete input selection
where possible.
It might occur that input names used by the remote control differ from the
names used on your device (e.g.‘Input 1’ could be ‘HDMI’,‘Input 2’ could be
‘RGB’, etc.).Try all input commands and check whether your device reacts.
Maybe the original remote control does not have discrete commands, but
nevertheless the Prestigo supports them.
Command sequences
Before you set up a macro, it is useful to try out the sequence of commands
you intend to program, using the original remote control.
You may encounter issues that can help you optimize the macro.
E.g. for most TVs the sequence 0 and 1 in a macro will perform better than
1 only. Other TVs might need -/-- 1 2 iso 1 2, etc.
Button press duration
For some devices it may be necessary to extend the duration of an IR
command (button press) for these devices need a long button press on the
original remote control in order to perform certain functions.
E.g. some PanasonicTVs only turn on after a long press on the Power (B)
button and some Philips DVD players only eject a disc after a long press on
the Stop button.
Delay time
Sometimes delay times between IR commands (button presses) are needed,
for the receiving device needs some time to react.
E.g. after turning on your TV, it may take a couple of seconds before you are
able to change inputs. Also when setting up favorites delays may be needed
since the receiving device(s) need(s) some time to react (for this refer to
chapter 4.5 ‘Setting up favorites’).
You can easlily try this out by pressing 1 and 2 very fast after each other on
the original remote control. If your TV switches to channel 12, no delay time
is needed. If yourTV switches to channel 1 a delay time is needed.
Extra possibilities

11EN
English
Testing
It is advised to test an activity macro twice, before actually using it.
If, in the second test, the macro behaves different than in the first test,
you may have included cyclic codes for A/V input selection or you did not
include enough delay times. In this case, adapt the cyclic codes to discrete
codes and / or include more (or longer) delay times.
1In the Home screen, touch the
Home
Devices
Wat ch TV
Listen to music
Wat ch a movie
Play a game
Activities
‘Activities’ tab.
• The available activities (if already
added) are displayed on the
screen.
2Keep the HOME button pressed for
Wat
ch a movie
Play a game
3 seconds.
• The Setup toolbar appears.
You can now add, delete, rename
and rearrange activities.
• Press the button to exit Setup
mode at any time.
4.3.1 Adding activities
1Touch the button in the toolbar.
• The Add activity screen appears.
2Select an activity and follow the on-screen instructions.
• Touch the ‘Help’ button if you need extra information.
3Touch the button in the toolbar when finished.
• The last used Activities screen appears.
The activity is now stored in the remote control memory.
4.3.2 Deleting activities
1Select an activity and follow the on-screen instructions.
2Touch the button in the toolbar.
• The Delete activity screen appears.
3Touch the ‘Yes’ button to confirm.
• The Setup Activities screen appears.
4Touch the button in the toolbar when finished.
• The last used Activities screen appears.
The activity is now deleted from the remote control memory.
4.3.3 Renaming activities
1In the list of activities, select the activity you wish to rename.
2Touch the button in the toolbar.
• The Edit activity screen appears.
3Touch the ‘Rename’ button.
4Use the keyboard to enter the new name.
5Touch the ‘OK’ button when finished.
• The Setup screen appears.
6Touch the button in the toolbar.
• The last used Activities screen appears.
The activity is now stored under the new name.
4.3.4 Editing Start / Stop Activity Macros
1In the list of activities, select the activity for which you wish to edit the
macro(s).
2Touch the button in the toolbar.
• The Edit Activity screen appears.
3Touch the ‘Edit activity start macro’ or the ‘Edit activity stop macro’
button.
• The Edit macro screen appears.
Extra possibilities

12EN
English
4Use the and buttons in the toolbar to add / delete macro
buttons. Use the button in the toolbar to adapt delay times and
button press duration.This may be necessary to turn on devices that
require a long button press (for example some Panasonic TVs). In this
case you need to extend the duration of the button press that powers
on this device.
5Follow the on-screen instructions.
• Select a button and touch the button to rearrange the items in the
macro.
6Touch the button in the toolbar when finished.
• The last used Activities screen appears.
The new settings for the macro(s) are now stored.
4.3.5 Rearranging activities
1In the list of activities, touch the activity you wish to rearrange.
2Touch the button.
3Use the arrows to move the activity to the preferred position.
4Touch the button in the toolbar when finished.
• The last used Activities screen appears.
4.4 Selecting activities
Start an activity
1Make sure you have left Setup mode (the toolbar should not be visible).
2Start an activity by touching its
Home
Devices
WatchTV
Listen to music
Watch a movie
Play a game
Activities
button on the screen.
• Use the keypad(s) and appropriate
hard buttons on the remote control
to operate the activity devices.
• Touch the button to go to
the next keypad.With the
button you go back to the previous keypad.
• If a ‘Start Activity’ macro has been set up for the activity, the macro
will be executed when selecting the activity in the Home screen.
All activity devices will be turned on automatically and the required
inputs will be selected. For this refer to chapter 4.3 ‘Start / Stop
Activity macro’.
If a device did not turn on, touch the ‘On’ button under the device
name in the screen.
Stop an activity (with Activity Macro)
1Press the Power (B) button.
• The Power screen appears.
The activity devices are displayed.
2Touch the ‘Activity off’ button or
TV On
DVD On
Radio O
Power
press the Power (B) button again
to stop the activity and turn off all
activity devices.
Stop an activity (without Activity Macro)
1Press the Power (B) button.
• The Power screen appears.
The activity devices are displayed.
Extra possibilities

13EN
English
2Touch the Off buttons to turn off
the devices.
4.5 Setting up favorites
Favorites are your favoriteTV and radio channels that you can select and
watch / listen with a single button press.
1In the Home screen, select a device or activity.
2Touch the ‘Favorites’ tab.
WatchTV
Keypad
1
7
4
2
8
0
5
3
9
en
ter
6
Favorites
• The available favorite channels
(if already added) are shown on
the display.
3Keep the HOME button pressed
Discovery Channel
RTL
for 3 seconds.
• The Setup toolbar appears.
You can now add, delete,
rearrange and rename favorites.
• Press the button to exit Setup
mode at any time.
4.5.1 Adding favorites
1Touch the button in the toolbar.
2Use the keyboard to enter the name of the favorite channel you wish to
add and touch the ‘OK’ button.
• The remote control now checks if the favorite channel name and
icon are available in the internal database.
3Follow the on-screen instructions to select the channel name and assign
button presses to it.
• Touch the ‘Help’ button if you need extra information.
4Touch the button in the toolbar when finished.
• The last used Favorites screen appears.
The channel is now added to the remote control memory.
4.5.2 Deleting favorites
1In the list of favorites, select the favorite channel you wish to delete.
2Touch the button in the toolbar.
• The Delete favorite screen appears.
3Touch the ‘Yes’ button to confirm.
• The Setup screen appears.
4Touch the button in the toolbar when finished.
• The last used Favorites screen appears.
The channel is now deleted from the remote control memory.
4.5.3 Renaming favorites
1In the list of favorites, select the favorite channel you wish to rename.
2Touch the button in the toolbar.
• The Edit favorite screen appears.
3Touch the ‘Rename’ button.
4Use the keyboard to enter the new name.
Extra possibilities

14EN
English
5Touch the ‘OK’ button when finished.
• The Setup screen appears.
6Touch the button in the toolbar.
• The last used Favorites screen appears.
The favorite is now stored under the new name.
4.5.4 Changing the channel icon
1In the list of favorites, select the favorite channel for which you wish to
change the icon.
2Touch the button in the toolbar.
• The Edit favorite screen appears.
3Touch the ‘Change channel icon’ button.
• The Setup Favorites screen appears.
4Select the desired icon.
5Touch the ‘OK’ button when finished.
• The Setup screen appears.
6Touch the button in the toolbar.
• The last used Favorites screen appears.
The favorite channel is now stored with the new icon.
4.5.5 Editing a channel macro
4.5.5.1 Changing the channel number
When a favorite channel is selected, the remote control sends outs a macro
to select the channel number. E.g. for channel 25 the remote control sends
out macro ‘2 - delay time - 5’.The delay time is the time after which the
next digit in the macro is sent.
If, for whatever reason, the cable company changes the channel position
(e.g. new position 127), you have to enter the new macro manually into the
remote control memory. E.g.‘1 - delay time - 2 - delay time - 7’.
1In the list of favorites, navigate to the page which contains the favorite
for which you wish to change the channel number.
2Keep the HOME button pressed for 3 seconds to enter Setup mode.
3Select the favorite you wish to edit.
4Touch the button in the toolbar.
• The Edit favorite screen appears.
5Touch the ‘Edit channel macro’ button.
• The Edit macro screen appears.
• The ‘action’ list for this channel is displayed.
6Use the button in the toolbar to delete the old digits.
7Use the button in the toolbar to enter the new digits.
Follow the on-screen instructions.
8Touch the button in the toolbar when finished.
• The Setup screen appears.The new macro is now stored and will
be sent out when selecting the favorite channel.
4.5.5.2 Optimizing the channel macro performance
You can tweak the channel macro for optimal performance by fine-tuning
the delay times and button press duration to allow faster channel switching.
Delay time and button press duration depend on the reaction time of the
device.
1In the list of favorites, navigate to the page which contains the favorite
for which you wish to optimize macro performance.
2Keep the HOME button pressed for 3 seconds to enter Setup mode.
3Select the favorite you wish to edit.
4Touch the button in the toolbar.
• The Edit favorite screen appears.
5Touch the ‘Edit channel macro’ button.
• The Edit macro screen appears.
6Touch the button in the toolbar.
Extra possibilities

15EN
English
7Use the ‘+’ and ‘–’ buttons to adjust delay times and channel press
duration. Follow the on-screen instructions.
8Touch the button in the toolbar when finished.
• The Setup screen appears.The new delay times and / or button
press duration are now stored.
4.5.6 Rearranging favorites
1In the list of favorites, touch the favorite channel you wish to rearrange.
2Touch the button.
3Use the arrows move the favoritel to the preferred position.
4Touch the button when finished.
• The last used Favorites screen appears.
4.6 Selecting favorites
1Make sure you have left setup mode (the toolbar should not be visible).
2In the list of favorites, touch the
Wat chTV
Keypad
CNN
MTV
Discovery Channel
RTL
Favorites
favorite TV or radio channel you wish
to watch / listen to.
• The remote control sends out a signal and the TV / tuner / receiver
switches to the selected channel.
• Touch the and buttons to scroll through your
favorites.
4.7 Reconfiguring buttons
The remote control is equipped with the most used functions for operating
your devices. However, if you miss certain functions from your original
remote control, you can add these functions via the Setup menu. In this
menu you can also delete, rename and rearrange button functions and
repair buttons that do not function properly.
• When a device is selected and its
Discovery Channel
RTL
keypad is displayed, keep the HOME
button pressed for 3 seconds.
• The Setup toolbar appears.
You can now add, delete, rename
and repair buttons.
4.7.1 Adding buttons
1Touch the button in the toolbar.
• A Functions List appears on the screen.
2Touch the button function you wish to add.
3Follow the on-screen instructions for testing the button.
4Touch the ‘Yes’ button if the new button functions properly.
• The tool bar appears.
5Touch the button in the toolbar when finished.
• The last used Setup screen appears.
The button is now added to the keypad.
Extra possibilities

16EN
English
4.7.2 Editing activity buttons
Buttons within an activity can be edited afterwards.
For activities, refer to chapter 4.3 ‘Setting up activities’.
For deleting, rearranging, renaming, fixing and learning buttons,
refer to the relevant chapters in 4.7 ‘Reconfiguring buttons’.
For adding buttons to your activity pages:
1When an activity is active and a keypad is displayed,
press the HOME button for 3 seconds.
• The Add button screen appears.
2Touch the button in the toolbar.
3Select the device from which you wish to add a button to the keypad.
Follow the on-screen instructions.
4Touch the button in the toolbar when finished.
• The Setup screen appears.
The button is now added to the remote control memory.
4.7.2.1 Deleting buttons
1In the Setup screen, select the button you wish to delete.
2Touch the button in the toolbar.
3Touch the ‘Yes’ button to confirm.
• The Setup toolbar appears.
4Touch the button in the toolbar when finished.
• The Setup screen appears.
The button is now deleted from the remote control memory.
4.7.3 Renaming buttons
1In the Setup screen, select the button you wish to rename.
2Touch the button in the toolbar.
• The Edit button screen appears.
3Touch the ‘Rename’ button.
4Use the keyboard to enter the new name.
5Touch the ‘OK’ button when finished.
• The Setup screen appears.
6Touch the button in the toolbar when finished.
• The last used Setup screen appears.
The button is now stored under the new name.
4.7.4 Repair a button
If a device does not respond properly to a button command you can have
the remote control search for the button function in its database or learn
the function from the original remote control.
Note that buttons in an activity belong to a certain device. If a button is
repaired within an activity, it will also be repaired in the corresponding
device and vice versa.
4.7.4.1 Searching the database
1Make sure the receiving device is able to respond. E.g. when you try to
fix the Play button for your DVD player, make sure to insert a DVD in
the DVD player otherwise the Play button is not able to function.
2Touch the button in the toolbar.
• The Edit button screen appears.
3Press / touch the (hard) button that does not work.
4Touch the button in the toolbar.
5Select ‘Repair this button’.
6Select ‘Search’ in the screen that appears and follow the on-screen
instructions.
7Touch the button in the toolbar when finished.
• The last used Setup screen appears.The button is now fixed.
Extra possibilities

17EN
English
4.7.4.2 Learning button functions
When a button could not be found in the remote control database you can
learn the remote control the function from the original remote control.
Note
Any function already stored under a button will be will be overwritten by the
new function.
Tips on learning button functions
• Some functions of some types of remote control might not be learned.
• Keep at least 1 metre (3.3 feet) away from incandescent or low-energy
lights when learning.
• Note that the IR receiver, used for learning button functions, is located
at the bottom of the remote control.
• You can store a function under any of the available buttons, except
under:
- the HOME button in the Devices screens:
- the HOME, POWER (B) and AV buttons in the Activities screens;
- any button in the Home screens.
1Place both remote controls on a flat surface (like a coffee table)
and aim them in such way that the IR transmitter (at the top) of the
original remote control points at the IR receiver (at the bottom) of the
SRT9320.
Keep about 25 - 50 mm in between the remote controls.
You may need to adjust the height of one of the remote controls to
achieve this.
25 - 50 mm
2Touch the button in the toolbar.
• The Edit button screen appears.
3Press / touch the (hard) button that you wish to learn a new function.
4Touch the button.
5Select ‘Repair this button’.
6Select ‘Learn’ in the screen that appears and follow the on-screen
instructions.
7Touch the button when finished.
• The last used Setup screen appears.
The button has now successfully learned the new function.
If learning fails:
• Try keeping the button pressed for a longer or shorter period of time.
• Adjust the distance between the two remote controls (closer or further
away).
• If problems reoccur with the same button, check if the original remote
control is transmitting and operates the target device.
Extra possibilities

18EN
English
4.7.5 Rearranging buttons
1Select the button you wish to rearrange.
2Touch the button.
3Use the arrows to move the favorite to the preferred position.
4Touch the button when finished.
• The last used Setup screen appears.
4.8 Reconfiguring the Power / AV buttons
In the Power / AV menu you can change the buttons that will be used for
turning on / off devices and the buttons that are used for input selection in
an activity without going back to the Home screen first.
Power
Enables you to turn devices on and off without going back to the Home
screen first. E.g. when you select an activity and one or more devices do
not turn on automatically, you can turn on the device(s) by pressing the
corresponding ‘On’ button(s) in the Power screen.When a device of a
previously selected activity does not turn off automatically when a new
activity is selected, you can turn off the device by pressing the corresponding
‘Off’ button in the Power screen.
1Select an activity.
2Press the Power (B) button.
• The Power screen appears.
3Keep the HOME button pressed
DV
D On
DVD O
for 3 seconds.
• The Setup screen appears.
4Select the On or Off button you
wish to change.
5Follow the on-screen instructions.
6Touch the button in the toolbar
when finished.
• The Power screen appears.The new button is now added.
A/V
Enables you to select A/V inputs without going back to the Home screen
first. E.g. when you select an activity and one or more A/V inputs are
not automatically selected, you can select the input(s) by pressing the
corresponding A/V button(s) in the A/V screen.
1Select an activity.
2Press the AV button.
• The AV inputs screen appears.
3Keep the HOME button pressed
Receiver AV
for 3 seconds.
• The Setup screen appears.
4Select the AV button you wish to
change.
5Follow the on-screen instructions.
Extra possibilities

19EN
English
6Touch the button in the toolbar when finished.
• The Power screen appears.The new button is now added.
4.9 Adjusting system settings
In the System settings menu you can adjust a number of default remote
control settings to suit your own personal preferences.
1In the Home screen, touch
Home
Devices
WatchTV
Listen to music
W
Activities
the ‘Devices’ tab.
• The available devices are shown
on the display.
2Keep the HOME button pressed
x
DVD
Receiver
for 3 seconds.
• The Setup screen appears.
3Touch ‘My Prestigo’.
• The System Settings screen
appears.
4Touch the item for which you wish to adapt the settings.
Settings for the following items can be adjusted:
- Language: selects English, French, Spanish,
German, Dutch, Portuguese, Italian or
Russian language.
- Brightness: sets the brightness of the display.
- Backlight time-out: sets the time for the display illumination to
turn off.
- Key backlight On / Off: turnes button backlighting On / Off.
- Full reset: restores the default factory settings.The
remote control needs to be installed again.
- Sound settings: sets the volume of the ‘click’ sound of the
buttons.
5Follow the instructions in the corresponding System settings screen.
6When finished, touch the button in the toolbar to go back to the
System Settings screen.
• Press the button to exit Setup mode at any time.
4.10 Installing the Philips PrestigoSync software
If you wish to customize the channel icon library or upgrade the remote
control firmware, you can install the Philips PrestigoSync software on your
PC.When the application is started, it will infrom you when firmware
updates, new channel icons, etc. for your remote control are available.
The Philips PrestigoSync software is available on the CD-ROM supplied or
can be downloaded at www.philips.com/support
For this, refer to chapter 7 ‘Service and support’.
Extra possibilities

20EN
English
1Place the installation CD-ROM supplied in your PC’s/laptop’s CD-ROM/
DVD drive.
• The PrestigoSync Install Wizard
screen appears. If the screen
does not appear automatically,
open ‘My computer’ double click
on the CD-ROM, then double
click the ‘Setup.exe’ icon.
2Click the ‘Next’ button and follow the on-screen instructions for
installing the PrestigoSync software.
4.10.1 Synchronizing data between the remote control and
your PC
1Make sure both PC and remote control are turned on.
2Connect the USB cable supplied
between the USB port of the
remote control and a USB port of
the PC.
• The PrestigoSync application will
now be launched automatically.
3You can now modify the icon library
and synchronize back to the remote control by pressing the ‘Sync’
button.
• For more detailed information and support, refer to the PrestigoSync
user manual that can be found under ‘PrestigoSync Help’ or by pressing
F1 on your PC keyboard.
5 Frequently asked questions
In this chapter you find answers to the most frequently asked questions
about your universal remote control.
Setup
I cannot enter ‘Setup’ mode.
Battery level too low.
• Recharge the battery. For this refer to chapter 2.1 ‘Charging the battery’.
Battery lifetime came to an end (battery cannot be recharged anymore).
• Replace the battery. For this refer to chapter 7.2.2 ‘Replacing the battery’.
How do I set up the remote control for combo devices (TV / VCR,
TV / DVD, DVD / VCR, etc)?
Some combo devices require you to set up two different source selection
buttons to control both parts of the combo device. For example, if you have
a TV / DVD combo, you might need to set up the remote control for both
TV and DVD to operate yourTV / DVD combo.
In the Activity menu you can create an activity enabling you to operate both
combo devices. for this, refer to chapter 4.3 ‘Setting up activities’.
How do I set up the remote control for my Home Theater System?
You may have to set up the remote control for all devices in your Home
Theater System separately.
In the Activity menu you can create an activity enabling you to operate all
devices in the system. for this, refer to chapter 4.3 ‘Setting up activities’.
Frequently asked questions