Philips 3000 series User manual

3000
TAT3265

MICRO-USB
TAT3265
TAT3265
3000
クイックスタートガイド

5
Multi-function panel (touch control)
USB C charging slot
1
3
2
4
5

first
• Charging process is verified by
the LED light. The blue light flashes
on the front panel,
• When the charging case is fully
charged,the blue light stops flashing.
While charging earpieces, Blue LED will flash.
Blue LED stops flashing and keeps lighting
on, means fully charged.

TAT3265
TAT3265
Auto power on: take the earpieces
from charging case, the earpieces
power on automatically and start
for pairing. Both left and right LED
of earpieces flash.
You will hear " power on" reminder
voice.
first

TAT3265
TAT3265
If you met L/R earbud disconnected
problem, please try below 2 methods
to reconnect.
4.1 Put both Left and Right earbuds in to
charging case，close the charging cover 10
seconds and pick up for Blue Tooth
reconnection.
4.2 If still not works, try below.
Step1: Touch 5seconds to manual power off
both earbuds.
Step2: Touch both Left and Right earbuds
10 seconds.
Step3: White LED flashes 3 times.
Step4: Reset done, headset in new pairing.
Take the L / R earpieces from the
charging case, the earpiece will
power on automatically. There will
be a voice " Power on" from L / R
earpiece.
4

Take both
earpieces out
from the
charging case
or touch 5
seconds.
Earpieces
click twice
click twice
press and hold
2 seconds
Click 3 timesRight/Left
earpieces
The LED flashes
once
The LED flashes
quickly
The LED flashes
quickly. If no
connection can be
made, the ear pieces
will turn itself off in 5
minutes.
You will hear low
battery voice pop
press and hold
for 2s
press and hold
2s
Earpieces
Place both earpieces in
charging case and close
the charging cover..
Backward
Forward Only the blue LED
flashes.
The blue LED
flashes.
click

TAT3265
TAT3265