Philips Beolink 1000 User manual

TAT1215/1225

TAT1215
MICRO-USB
TAT1225

LR
first
• Charging process is verified by
the LED light. The red light flashes
on the front panel,
• When the charging case is fully
charged,the red light goes on.
While charing earpieces, Red LED will flash.
Red LED stops flashing and keeps lighting
on, means fully charged.

TAT1225
TAT1225
Blue LED
ashes once
for 10s
LED ashes
alternately in
white and blue
first

TAT1225
TAT1225
Take the L / R earpieces from the
charging case, the earpiece will
power on automatically. There will
be a voice " Power on" from L / R
earpiece.
4If you’d like to switch from single earpiece
pairing to dual earpieces pairing mode,
please try below 2ways.
4.1 Put both L and R earpieces back into power
case and then take the 2 earpieces out to pair
and connect Bluetooth again;
4.2 If still not works, try to reset. Put L&R into power
case and press the button for 4 seconds until the
white LED ashes. Then take L&R out of power
case and select BT, connect Bluetooth again. ”

Backward
Forward
The LED in
charging case
flashes.
The red LED is
lightening.

TAT1225
TAT1225

6
1.5
55
5.1
9
48
12

LR

TAT1225

TAT1225
07293-20-12451
“Este equipamento não tem direito à proteção contra
interferência prejudicial e não pode causar interferência
em sistemas devidamente autorizados.