Phonak roger Safety guide

How to Connect with
Roger Multimedia Hub
Device Description
1. On/Off
2. Indicator Light
3. Connect
4. Jack 3.5mm/1/8”
5. Micro-USB
6. Feet
• To switch on, press the On/Off button on the side of the Roger Multimedia Hub for 3 seconds. The green indicator
lights will flash until fully booted. The power indicator light will continue to fade in and out green during use.
•To switch off, press the press the On/Off button on the side of the Roger Multimedia Hub
for 3 seconds. The indicator lights will flash green 3 times and then turn off.
•When charging either with a USB power cord or in the Roger Charging Rack, the
indicator lights will flash green and when fully charged will shine solid green
General Operation

Independent Listening
For use when a child needs to listen to an audio source
independently- i.e. an audiobook or computer lab lesson.
1. Hold the Roger Multimedia Hub within 4” (10 cm) of the child’s
Roger receiver and press the large Connect button on the
Multimedia Hub. Repeat connection for additional receivers
2. Plug the Multimedia Hub into the audio out
jack of the tablet or other audio source.
3. Select “Headphones” from the pop up
menu on your computer. Figure 1
4. Adjust the volume by clicking on the speaker icon on the
bottom right corner of your computer screen. Figure 2
5. Play the audio source. The Roger Multimedia Hub will
transmit the audio to the connected receivers.
Figure 1
Figure 2