PI Manufacturing TTA-1354 User manual

4 Port USB 2.0 Extender Instruction Manual
Part: TTA-1354
The 4 port USB extender from PI Manufacturing lets you extend 4 USB 2.0
connections up to 150ft. The signal extends over a single Cat5e / 6 cable with
speeds up to 480Mbps. Great for applications such as extending keyboards, mice,
and more.
The USB extender features 4 USB 2.0 ports. Unlike standard USB extenders where
it only allows 1 USB device, this allows up to 4 USB 2.0 devices to extend your
runs.
Please make sure your source (computer, DVR, etc.) is turned off before you
plug in the extender. Plug in all connections before you apply power to the
extender. If the source is on during setup, the extender will not work.
Safety Precautions
Do not expose the unit to rain or moisture
Before plugging in the power adapter, plug in the other ports first
Use only the supplied power adapter. When using another power adapter,
use only power adapters that are within the specifications
Included in Package
The USB extender includes a transmitter, receiver, and a 5V DC 3A power adapter.
The transmitter includes a USB Type A male connector that plugs into the source,
such as a computer, DVR, etc. On the other end is an Ethernet jack where you
plug in a Cat5e / 6 cable (up to 150 feet). On the receiver side, it includes an
Ethernet jack to plug the other end of the Cat5e / 6 cable, 4 –USB 2.0 ports to

plug in keyboards, mice, external HDDs, card readers, etc. A DC port is also
included on the receiving end to plug in a 5V DC 3A power adapter.
1 - Transmitter
1 - Receiver

Connection Diagram
Specifications
Transmitter USB Cable
1 x USB A Male
Receiver USB Jack
4 x USB A Female
Ethernet
1 - Cat5e / Cat6 (Transmitter)
1 - Cat5e / Cat6 (Receiver)
Transmission Distance
150ft (50m)
Power / USB Port
500mA
Power Supply
5V, 3A (Included)
Dimensions (mm)
Transmitter: 73 (L) x 32 (W) x 30 (H)
Receiver: 125 (L) x 53 (W) x 30 (H)
Weight
1.05 lbs