Pico Macom TSHP-C12 User manual

TSHP
1GHz 100dB EMI Digital Hardline Passive Distribution Components
www.picomacom.com
Distribution
Passive Components
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511Fax: [phone]
SC-1
Rev. 03/05
Series
Digital Optimized Broadband 5-1000MHz
frequency range
Interchangeable faceplates value enable “on
the fly” redesign for maximum time savings
and further reduced costs associated with
splicing in new tap housings with every
change.
Powder coated aluminum alloy housing with
double tongue in groove interface provides
100dB effective EMI/RFI shielding to reduce
signal egress/ingress issues
Triple sealed F-ports are pressure sealed
to15 psi for watertight operation even in
harsh environments
High tap-to-output isolation provides spurious
carrier protection and minimizes undesired
customer to customer interaction, reducing
picture distortion and return data interference
High-performance glass epoxy printed board
circuitrywith premium components provides
low intermodulation distortion to ensure
excellent performance with digital signals
Extended connector collars provide shoulder
for a positive heat shrink shield, eliminating
connector water migration and extending the
life of housing
Industry standard 5/8in/out and 7/16 tap
interface connection, 1-inch centered 11/2˝
long precision machined F-connector threads
ensure improved port-to-connector interface
and accommodate external security devices
Plated brass F-connectors improve electrical
interface properties and reduce the effects
of electrolysis
Bi-directional Input-Output power rating
up to 8A (multitaps) and 12A (splitters,
couplers, and power inserter) @ 30-90VAC
Tap output ports employ capacitor-coupling
circuitry to provide effective DC voltage
blocking for improved hum modulation and
intermodulation and improved reliability
Rotating internal seizing pins provide
increased installation flexibility by allowing
simplified pedestal and lockbox
mounting options
Housing top mounting clamp included for
quick and easier installation and flexibility
Performance tests conducted conforming
with SCTE standards IPS TP-201, 202, 203,
403A, 406
TruSpec’sTSHP-series 1GHz professional grade CATV outdoor hardline multitaps, splitters,
directional couplers and power inserters provide superb performance, unsurpassed by competitors’
equivalent models. The TSHP-series broadband frequency range 5-1000MHz provides excellent
bi-directional compatibility, while the high return loss and low insertion loss ideally suits the
TSHP-series for high-speed digital applications such as digital QAM systems and Internet applica-
tions. Our advanced glass epoxy printed board and surface mount circuitry includes special ferrite
core material, guaranteeing unsurpassed insertion loss, optimal isolation and return loss perform-
ance to 1GHz. This ensures high-quality analog or digital signal transfer and extremely low tap
port-to-port interaction.This equipment is designed for power compatibility with 30, 60, and
90VAC systems with current capacity up to 12A, enabling compatibility with most CATV powering
designs. Designed for the traditional CATV tree and branch signal distribution, the applications
range from CATV residential to MDU and strand, vault, pedestal or lockbox installations in
international and domestic cable distribution systems. In the event of system redesign, all multi-
taps are designed with removable plate fully compatible and interchangeable, allowing “on-the-fly”
tap value redesign and eliminating the hassle of re-splicing during multitap replacement. All plates
are marked with tap value and direction designations. The outstanding environmental weather-
proofing is provided by double tongue in groove interface, triple port moisture seal and non-corro-
sive powder coated aluminum alloy housing, providing an impressive 15 psi watertight seal for
long life in underground, submerged and salty environments. The multitaps are used in applica-
tions requiring the bulk of the input signal passing through one port, while reduced signal passes
from the tapped ports. The splitters and directional couplers provide signal distribution options to
feed multiple distribution legs. All TSHP-series multitap F-port threads are precision machined,
ensuring easy connector installation and removal, and improved port-to-connector interface. High
retention internal seizing pins ensure excellent connectivity to connector center lead.
1GHz 100dB EMI Digital Hardline Passive Distribution Components
TSHP-PI
TSHP-S2
TSHP-S3 TSHP-C8
TSHP-C12
TSHP-C16
TSHPSeries
TSHP-M4
TSHP-M8
TSHP-M2
COMPLIANT

Product Specifications
1GHz 100dB EMI Digital Hardline Passive Distribution Components
TSHPSeries
www.picomacom.com
SC-2
Rev. 03/05
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: [phone]
Specifications Subject to Change © Copyright 2005 Pico Macom, Inc.
TSHP-M2-XX 2port multitap + 4T 8 11 14 17 20 23 26 29 32 35
TSHP-M4-XX 4port multitap + 8T 11 14 17 20 23 26 29 32 35
TSHP-M8-XX 8port multitap + 11T 14 17 20 23 26 29 32 35
TSHP-C8 8dB Directional coupler
TSHP-C12 12dB Directional coupler
TSHP-C16 16dB Directional coupler
Ordering Information
TSHP-M2 TSHP-M4 TSHP-M8 TSHP-PI
TSHP-S2
TSHP-S3
TSHP-C8
TSHP-C12
TSHP-C16
Bandwidth:
In-Out: DC-1000MHz
Tap Ports: 5-1000MHz
Insertion Loss (TSHP-**): M2 M4 M8 S2 S3 C8 C12 C16 PI
Avg. @ 5MHz: 1.1 1.1 1.2 3.7 7.3 2.5 2.0 1.7 1.0
Avg. @ 1GHz: 2.4 2.5 2.6 5.0 9.2 4.1 3.5 3.5 1.5
Isolation Port-Port (TSHP-**): M2 M4 M8 S2 S3 C8 C12 C16 PI
Typ. @ 5MHz: 18 18 18 22 22 19 23 19 60
Typ. @ 1GHz: 19 19 19 18 18 18 18 18 53
ReturnLoss (TSHP-**): M2 M4 M8 S2 S3 C8 C12 C16 PI
Typ. @ 5MHz: 15 15 15 16 16 16 16 15 15
Typ. @ 1GHz: 16 16 16 16 16 16 16 16 16
Tap Loss (Tap value minus): ± 2dB
Impedance: 75Ω
Power Capacity (TSHP-**): M2 M4 M8 S2 S3 C8 C12 C16 PI
30~90VAC (Amperes): 8888 8 12 12 12 12
Connectors:
In: “KS” type female
Out: “KS” type female
Multitap: “F” type female
Specifications
TSHP-M + # Of Ports - + Specify Tap Value
TSHP-S2 2port splitter
TSHP-S3 3port splitter
TSHP-PI Power inserter
TSHP-M2-XX 3.9˝L x4.1˝W x 3˝D .68
TSHP-M4-XX 3.9˝L x 4.1˝W x 3˝D .70
TSHP-M8-XX 5.6˝L x 4.7˝W x 3˝D 1.10
TSHP-C8 6.1˝L x5.7˝W x 3.3˝H 1.46
TSHP-C12 6.1˝L x 5.7˝W x 3.3˝H 1.46
TSHP-C16 6.1˝L x 5.7˝W x 3.3˝H 1.46
TSHP-S2 6.1˝L x5.7˝W x 3.3˝H 1.44
TSHP-S3 6.1˝L x 5.7˝W x 3.3˝H 1.54
TSHP-PI 6.1˝L x 5.7˝W x 3.3˝H 1.40
Item Dimensions Weight (lbs.)