Pilotfly Action 1 User manual

QuickGuide
6-axis
intelligentsensor
Auto Invert Mode Anti shaking
Bluetooth control Fast configuration Fast home move
Temperature
calibration
Lightweight and
portable
Highly versatile
Encoder
Connection
32bit System
Easy setup

Insert batteries
Connection cable
beside the Hinge
Power switch on/off
1/4 " Screw Hole
Yaw motor for
panning
Operating instruction of the "Mode" button.
Single tap
Press & Hold 3 sec
Operation Function
Triple tap
Prevent any movement or vibrations during the Gyro calibration.
Head modeCamera stays in its current orientation.
Will initialize the Gyro calibration
Quadruple tap Follow roll mode
Five times tap The camera will move back to the initial position called "Home position".
Home move
All three axes are following your movements.
Follow mode
Double tap Lock mode
Roll motor
Mode Button
4-Way Joystick
Pitch motor
The flexible handle
can be turned
frontward or
backward to
90 degrees
Explanation
18350
Li-ion
18350
Li-ion
18350
Li-ion
2
1 3
4
5
Description
Quick Installation Function & Button intro
Bluetooth Remote & Connection
Software Driver download
Function Status Description Specification
Audio alerts:
Power on
Initialisation tone of gimbal
Calibrating
Low Battery
System boot up and initialisation
Be~Bi~Li~Bi~Li
Dn~Dn~Dn~Dn~Dn~Dn ~
Continuous cricket sound
Operating instruction of function button & Joystick:
1
Camera follows your movements
2
Camera is locked and horizontal levelled, while panning is possible.
3
Camera is locked on
4
All three axes are following your movements.
5
Invert the handle so it is above the camera and power on the Action1.
The gimbal will recognize automatically the invert mode. In this condition
your are also able to switch between other modes as described above.
Follow mode
Lock mode
Head mode
Follow roll mode
Invert mode
Open the handle and insert 3 x 18350 or 3 x
18650 Li-Ion batteries (unprotected). Ensure the
correct insertion of batteries and fix the handle to
the main unit while screwing it.
Make sure that the roll
axis is well
Mount the camera on the fixed by using the
screws. balanced. Ensure center of gravity
of the camera and tight the screws.
Push the mode button to
switch between the
different modes.
Size:
Weight:
Batteries:
Voltage range:
Movement range:
Operation System:
18650 Battery extend handle
(3 x 18650 unprotected )
Extension cable
to connect main unit
with handle
Power on / off
Push the red button
to power on and off
the gimbal. You can
immediately use the
Pilotfly Action1 after
powering on.
The pitch and heading direction to follow to maintain a balance manually.
Pitch and Roll lock to the horizontal, Yaw follow to target
Attention:
Be careful while mounting
the handle on the hinge.
Ensure that the cable won't be
damaged while inserting the
screw through the hinge.
Backup profiles to your computer.
Technical Support via E-mail:
info@pilotfly.de , pilotfl[email protected]
QuickGuide
Bluetooth pairing password:1234
Auto pairing
Stabilisation system for action camera /
Handheld of wearable 3-axis gimbal with Sony ActionCAM
The Action -1 is equipped with a
Bluetooth module and can be remotely
controlled via Smartphone Android
App (SimpleBGC32) or via the Pilotfly
Remote Control RM-1.