Pinion NEUTRON User manual

I s sued b y :
PINION WATCH COMPANY LTD
– OXFORDSHIRE, ENGLAND
NEUTRON
INSTR UCTION BOOK

Model: NEUTRON
Version 1.0 - April 2022
PI NIONWATC HE S.CO M

INSTRUCTIONS
Follow the instructions to operate your watch.
Please ensure you do not try to set the time in
wet or humid conditions, and you push the
crown back into correct position once you
have completed your adjustments.
PULL
12 3

Position 1
This watch has a push-down crown
and will wind itself automatically
when worn. If the watch has
stopped running, it is recommended
to wind the watch by turning the
crown clockwise for approx. 40
turns (40 seconds) prior to wearing.
Position 2
This position is not used as there is
no date display, but the crown
position is still present.
Please ensure that you only use
positions (1) to manually wind and
(3) to set the time.
Position 3
Pulling the crown into the position
(3) will stop the seconds hand so
that time can be set by moving the
crown counter-clockwise to adjust
the hands.
1
2
3

Your watch has been engineered to be highly
robust and with the correct care will last for
many years. Please ensure that you follow the
tips below when caring for your watch.
Cleaning
To clean your watch case and sapphire crystal
use water with mild soap and a soft cloth.
Water resistance
Ensure the crown is pushed in all the way
before any contact with water. Do not pull the
crown out to adjust the time or date when the
watch is submerged in water or if you are in a
very humid environment.
Sea water
If your watch has been in sea water, then
afterwards, wash the watch with fresh water.
Shock resistance
The watch and movement have been
engineered to be robust, however try and
avoid any heavy shocks to the watch. This
includes any sports such as golf which can
cause damage to the automatic movement if
worn whilst playing over a long time period.
Magnetic fields
Avoid placing the watch near items which may
contain magnetic fields (i.e., loudspeakers) as
this may cause the watch to run incorrectly
and require it to be demagnetized.
WATCH CARE

Your watch is warranted by Pinion Watch
Company Ltd for a period of twenty-four (24)
months from the date of purchase.
The warranty covers –
Material and manufacturing defects which
may exist at the time of purchase, and during
the warranty period, you have the right to
have any defect repaired free of charge.
The warranty does not cover –
Normal wear and tear and aging (e.g., any
colour change, or scratches made to any parts
of the watch).
Any damage from accidents, abnormal use or
incorrect use of the watch. This includes
damage to the movement.
The watch being opened, altered or repaired
by a non-authorised person.
More information & contact details online –
pinionwatches.com/warranty
SERVICING & REPAIRS
24-MONTH WARRANTY
It is recommended you service your Pinion
watch every 3-5 years to ensure that essential
maintenance can be carried out and that any
worn parts such as gaskets (to retain water
resistance) can be replaced.
More information online –
pinionwatches.com/servicing

FUNCTIONS
Time in hours, minutes, seconds.
Hacking seconds feature.
MOVEMENT
Automatic Swiss made ETA 2824-2.
25 Jewels.
Frequency: 28,800 vibrations per hour.
38 hour power reserve.
CASE
Stainless steel. Brushed finish. ø38mm
Stainless steel crown with Pinion motif.
Solid steel case back, engraved and
numbered.
GLASS
Domed sapphire crystal with anti-reflective
coating (inside only).
DIAL
Electroplated with brushed finish.
Polished applied numerals.
Printed with Swiss Superluminova® coating
‘Old Radium’.
HANDS
Coated brass hands with Swiss
Superluminova® coating (hour, minutes,
seconds).
WATER RESISTANCE
10 ATM, 100 metres.
STRAP
20mm strap with 18mm Pinion steel buckle.
TECHNICAL
SPECIFICATIONS

Contact details for all warranty, servicing and
repairs enquries –
Online
pinionwatches.com/contact
Email
[e-mail]
Telephone
[phone]
(Between 09:00 and 18:00 GMT)
CONTACT DETAILS