DAS.4 SG40 User manual

SG40
1. On/O key
2. Display
3. Watch strap
USER MANUAL

Charging Method
1.Before using the watch for the rst me,
charge it for 2 hours and ensure it is fully
charged.
2.Charging with a Magnec Charging Cable:
Charge the product with a magnec charging
cable in the direcon shown in the gure
below.
Installing the APP
According to the operang
system of your mobile phone,
scan the corresponding QR
code or enter “app store” or
Android app market to down-
load “GloryFit” and install it.
System Requirements: Android 4.4 or above;
IOS8.0 or above. Supporng Bluetooth 4.0 or
above.

Binding the Watch
1.Turn on the Bluetooth of your mobile phone.
2.Turn on the APP – click “Add Device” – Search
– click the corresponding Bluetooth name
searched — the watch is successfully bound
Operang Instrucons
Denions of Keys
On/O Key: On any screen, press it for 3 seconds
and the Shut Down Conrmaon screen will pop
up. Press it shortly to return to the main screen.
Operaon: Swipe the screen to the le or right
to switch between screens. If the current screen
has sub-screens, click an icon to enter the cor-
responding sub-screen. Swipe the screen to the
right to return to the previous menu.
Synchronizing Informaon
Aer the watch is successfully bound with your
mobile phone, the watch will adjust the me
automacally and at the same me immediately
synchronize and record your sports informaon
and health status.

Main Funcons
Clock, Step Count, Distance, Calorie, Sleep
Monitoring, 24-hour Heart Rate Monitoring,
Call Reminder, Alarm Clock, Excessive Sing
Reminder, Nocaon, etc.
Mulple Languages
Languages in the Watch: 11 languages, i.e.
Chinese, English, Japanese, German, Italian,
French, Spanish, etc.
Languages in the APP: Russian, Indonesian,
German, Italian, Czech, Japanese, French,
Simplied Chinese, Tradional Chinese, English,
Portuguese, Spanish, Arabic, Korean.
Power o and Reset
Press the side key for 3 seconds to turn on the
watch and enter the main screen. Swipe the
screen upwards to enter the Sengs screen.
Click “Sengs” to enter the Sengs List. Select
Power o or Reset.
Switch between Screens
There are a total of 3 screens. Press for 3 sec-
onds to enter the main screen. Swipe the screen
to the right and select a new screen. Return to
the main menu and switch between screens.

Step Count
The number of steps, distance and calories are
recorded. The data are cleared at midnight and
will be recounted on the new day. At the same
me, the historical data are saved and uploaded
to the APP.
Heart Rate Monitoring
Enter Heart Rate Monitoring and the light will
keep ashing. 10 seconds later, the monitoring
data will appear and be synchronized in the APP.
Swipe the screen and the monitoring will stop.
You can set 24-hour connuous monitoring in
the APP.
Sleep Monitoring
The sleep state of last night is recorded. Your
sleep is monitored only when you wear the
watch. The me can be set to 8:00 p.m. to 12:00
noon the next day.

Sports Mode
There are a total of 6 modes for selecon.
Press the sport you want to enter its funcon.
Your sports data are recorded in detail (heart
rate, calories etc).
Sengs
Find Mobile: Click “Find”.
If your mobile phone is
connected to the watch, your
mobile phone will vibrate.
Brightness Control: The watch has 4 bright-
ness levels. Click “Brightness” to increase the
brightness level. The default brightness level
of the watch is level 2.
Product Informaon: Bluetooth name, Blue-
tooth address and version number.

Nocaon
It is turned on in an the APP. There are 21 APPs
for selecon, such as WeChat, QQ, Facebook,
WhatsApp, Twier, Line, etc. Only when the
watch keeps is connected to your mobile phone
and Nocaon is turned on will the watch
receive nocaons.
Call Reminder: It is turned on
in the APP. You can set “Delay
Reminder” and “Reject Call”. The
contact person or phone number
of the caller is displayed when a
call is coming.
Excessive Sing Reminder: It
is turned on in the APP. You can
set the start me, end me and
interval of reminder.
Alarm Clock: It is turned on in the
APP. When the me set arrives, the
watch will vibrate to remind you.

Raise Wrist to Light up Screen: It is turned on in
the APP. Only aer it is turned on will the screen
be lit up when you raise your wrist.
Do Not Disturb Mode: It is turned on in the APP.
You can set the start me and end me. Aer
the mode is turned on, the watch will turn o
“Vibraon”, turn o “Raise Wrist to Light up
Screen” and turn o “Nocaon”.
Shake to Take Pictures: It is turned on in the APP.
When you raise your wrist with the watch, your
mobile phone will take a picture aer countdown
from 3 to 1.
Find Watch: It is turned on in the APP. The watch
will vibrate.
SMS Reminder: It is turned on in the APP. When
your mobile phone receives an SMS, the watch
will remind you synchronously.
Duraon of Bright Screen: It is turned on in the
APP. You can set the Duraon of Bright Screen to
5s, 10s or 15s.

Time System: It is set in the APP. You can set
12-hour me system or 24-hour me system.
Device Language: It is set in the APP. There are
18 languages for selecon.
Basic Parameters
Master Chip: Realtek8762C
Baery Capacity: 160mAh (polymer)
Display: 1.28” TFT Display
Working Time: 5-7 days
Resoluon Rao: 240*240dpi
Synchronizaon Method: Bluetooth 4.0 Product
Weight: 48g Working Temperature: 10℃~50℃
Product Size: Diameter 44.5*9.8mm Packing
List: Main machine, magnec charging cable,
and User’s Guide Material of Wrist Strap: TPU
Compability: IOS 8.0 + Android 4.4
FAQs
1.Why the watch cannot be searched or con-
nected at the me of binding?
a.Please check that your mobile phone’s

Bluetooth has been turned on and ensure that
the distance between the watch and your mobile
phone is within 0.5 5m.
b.Please check whether electricity exists in the
watch. If, aer the watch is charged for 2 hours,
the problem cannot be solved, please contact us.
2.Why the Bluetooth cannot be connected
occasionally?
The Bluetooth service of some mobile phones
becomes abnormal occasionally at the me of
restart. Usually the Bluetooth can be connected
normally aer your mobile phone is restarted.
3.Why an Android mobile phone is disconnected
easily?
The system memory management of an Android
mobile phone turns o the APP on the backstage
forcibly. You need to turn o the power saving
mode or drag the APP to the green backstage of
the FPT System Manager, then the APP will not
be turned o forcibly. When the APP is running
on the backstage, the Bluetooth will not be
disconnected automacally.

Precauons
1.Never seriously impact the main machine.
2.Never allow the product to be in contact with
chemicals, such as benzene, diluent, etc.
3.Do not allow the product to be near a high-in-
tensity magnec eld, power staon, etc.
4.Please avoid direct light or heat generaon
devices.
5.Never disassemble, repair or alter the product.
6.Please dispose disused packages, baeries and
electronic products properly by category.
Why the watch cannot receive push
nocaons?
Sengs of an Android Mobile Phone:
1.Check that the push nocaons switch on the
mobile phone client has been turned on.
2.Check that messages can be displayed normally
on the nocaon bar of your mobile phone.
The push nocaons of the watch are pushed
by reading the messages on the nocaon bar
of your mobile phone. If there are no messages

on the nocaon bar of your mobile phone,
the watch cannot receive push nocaons.
(You need to nd “Nocaon Sengs” in the
Sengs of your mobile phone and turn on the
Nocaon switches of WeChat, QQ, phone,
SMS and mobile phone client.)
Sengs of an iPhone:
1.Check that the push nocaons switch on the
mobile phone client has been turned on.
2.Check that messages can be displayed normally
on the nocaon bar of your mobile phone.
(You need to nd “Nocaon Sengs” in the
Sengs of your mobile phone and turn on the
Nocaon switches of WeChat, QQ, phone,
SMS and mobile phone client.)
Disclaimer
Warning: The product is not a medical device.
The watch and its APP are not intended to be
applied to diagnose, treat or prevent diseases
or symptoms. To change your habit, such as
exercise habit, etc., be sure to consult qualied
professional medical personnel to avoid causing
casuales. The Company reserves the right to

IP68 – Only dustproof
and only accidental con-
tact with fresh water –
hand washing.
modify or improve any funcon described in
the Guide without prior noce. At the same
me, the Company reserves the right to
keep the contents of the product updated.
All the contents are for reference only.

www.das-4.com