Pioneer GM-5500T User manual

BRIDGEABLETWO-CHANNEL POWER AMPLIFIER
AMPLIFICATEUR DE PUISSANCE PONTABLE A DEUX CANAUX
AMPLIFICADOR DE POTENCIA DE DOS CANALES PUENTEABLE
GM-5500T
Owner's Manual
Mode d'emploi
Manual de instrucciones
m
::::s
(,Q
-·
f/1
::r
m
f/1
"'C
I»
::::St
0

Section
ID
(Before you
start
Thank
you
for
purchasing
this PIONEER product.
To
ensure proper use, please read
through
this
manual before using this product.
It
is espe-
cially important that you read and observe
WARNINGs
and
CAUTIONs
in this manual.
Please
keep
the
manual
in
a
safe
and
accessible
place
(or
future
reference.~
Information
to
User
Alteration or modifications carried out without
appropriate authorization
may
invalidate the
user's right to operate the equipment.
After-sales service
for
Pioneer products
Please contact the dealer
or
distributor
from
where you purchased this
unit
for
after-sales
service (including warranty conditions)
or
any
other information.
In
case the necessary infor-
mation is not available, please contact the
companies listed below:
Please do not ship your
unit
to
the companies
at the addresses listed below for repair
without
advance contact.
U.S.A.
Pioneer Electronics
(USA)
Inc.
CUSTOMER
SUPPORT
DIVISION
PO.
Box
1760
Long
Beach,
CA
90801-1760
800-421-1404
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER
SATISFACTION
DEPARTMENT
340
Ferrier Street
Unit 2
Markham, Ontario
L3R
2Z5,
Canada
1-877-283-5901
905-479-4411
For warranty information please see
the
Lim-
ited Warranty sheet included with this
unit.[!)
CD
En
Visit
our
website
Visit us at the following site:
http://www.ploneerelectronics.com
in Canada
http://www.pioneerelectronics.ca
)
1 Register your product.
We
will
keep
the details
of your purchase
on
file to help
you
refer to
this information
in
the event of
an
insurance
claim such
as
loss
or theft.
2
Receive
updates
on
the latest products and
technologies.
3 Download owner's manuals, order product
catalogues, research new products, and
much
more.~
The Safety
of
Your Ears
is
in
Your Hands
Get the most out of your equipment
by
playing
it at a safe
level-a
level that lets the sound
come through clearly
without
annoying blar-
ing
or
distortion and, most importantly, with-
out
affecting your sensitive hearing. Sound
can
be
deceiving. Overtime, your hearing
"comfort level" adapts
to
higher volumes of
sound, so what sounds "normal" can actually
be
loud and harmful
to
your hearing. Guard
against
this
by
setting your equipment at a
safe level
BEFORE
your hearing adapts.
ESTABLISH A SAFE LEVEL:
• Set your volume control at a low setting.
• Slowly increase the sound until you can
hear it comfortably and clearly,
without
dis-
tortion.
• Once you have established a comfortable
sound level, set the dial and leave it there.
BE
SURE TO OBSERVE THE
FOLLOWING
GUIDELINES:
• Do not turn up the volume so high
that
you
can't
hear what's around you.
• Use caution
or
temporarily discontinue use
in potentially hazardous situations.
• Do not use headphones while operating a
motorized vehicle; the use of headphones
may create a traffic hazard and is illegal in
many
areas.~

Section
(~B_e_fo_r_e~y_ou __ st_a_rt __________________________ ~)CII
Before connecting/
installing the amplifier
AwARNING
• Handling the cord on this product or cords as-
sociated with accessories sold with the pro-
duct may expose
you to chemicals listed on
proposition 65 known to the State of California
and other governmental entities to cause can-
cer and birth defect or other reproductive
harm.
Wash hands afterhandling.
• The use of a special red battery and ground
wire
RD-223, available separately, is recom-
mended. Connect the battery wire directly to
the car battery positive terminal
®and the
ground wire to the car
body.
• This unit is for vehicles with a 12 V battery and
negative grounding. Before installing in
re-
creational vehicles, trucks or buses, check the
battery voltage.
• Always
use a fuse of the rating prescribed.
The use of an improper fuse could result in
overheating and smoke, damage to the pro-
duct and injury, including burns.
• Check the connections of the power supply
and speakers if the fuse of the separately sold
battery wire orthe amplifier fuse blows. Deter-
mine and resolve the cause, then replace the
fuse with and identical equivalent.
•
Do not allow this unitto come into contact
with liquids. Electrical shock could result.
Also, damage to this unit, smoke, and over-
heating could result from contact with liquids.
The surfaces of the amplifier and any attached
speakers may also heat up and cause
minor
burns.
•
In the event of any abnormality, the power
supply to the amplifier
is cut off to prevent
equipment malfunction. If this occurs, switch
the system power off and check the power
supply and speaker connections.
If you are un-
able to determine the cause, please contact
your dealer.
• Always disconnect the negative 8 terminal of
the battery beforehand to avoid the risk of
electric shock or short circuit during installa-
tion.
AcAUTION
• Always keep the volume low enough to hear
outside sounds.
• Extended use of the car stereo while the en-
gine is at rest or idling may exhaust the bat-
tery.
About the Protection function
The Protection function will operate in the condi-
tions outlined below. If the Protection function
is
turned on, the power indicator will turn off, and
the amplifier will shut down.
• If the speaker output terminal and speaker
wire
is short-circuited.
• If the temperature inside the amplifier gets too
high.
• If a
DC voltage is applied to the speaker out-
put terminal.
~Important (Serial number)
The serial number is located on the bottom of
this unit.
For your own security and convenience,
be sure to record this number on the enclosed
warranty card.
Note
Before installing this unit in your vehicle, refer to
the illustration below and remove the tag.
Do not use the parts you have removed (screws
etc.) when installing the unit in your vehicle.
Tag
En (])

Section
ID (
Setting
the
unit
What's
what
Front side
Rear side
To
adjust the switch, use a flathead screwdri-
ver if needed.
CD
LPF
(low-pass filter) switch
Switch the settings based
on
the connected
speaker.
• When the Subwoofer
is
connected:
Select
ON.
This eliminates high range
frequency and outputs low range fre-
quency.
• When the full range speaker
is
con-
nected:
Select
OFF.
OFF
outputs the entire fre-
quency range.
@
FREQ
(cut
offfrequency) control
Cut off frequency selectable from
40
Hz
to
500Hz if the
LPF
select switch
is
set to
ON.
®
BASS
BOOST
(bass
boost level control)
switch
You
can select a bass boost
level
from 0 dB,
6 dB and
12
dB.
@
GAIN
(gain) control
If output remains low,
even
when the car
stereo volume
is
turned up,turn controls to
lower level. If distortion occurs when the car
stereo volume
is
turned
up,
turn these con-
trols to higher level.
•
For
use with
an
RCA
equipped car stereo
(standard output of
500
mV),
set to the
NORMAL position.
For
use with
an
RCA
equipped Pioneer car stereo, with max.
CD
En
output of 4 Vor more, adjust
level
to
match that of the car stereo output.
•
If
you
hear too much noise when using
the speaker input terminals, turn the
gain control to higher level.
® Power indicator
The
power indicator lights up to indicate
power
ON.
0
Setting
gain
properly
• Protective function included to prevent
malfunction of the unit and/or speakers
due to excessive output, improper use or
improper connection.
• When outputting high volume sound etc.,
this function cuts off the output for a few
seconds
as
a normal function, but output
is
restored when the volume of the head
unit
is
turned down.
)
• A cut
in
sound output may indicate impro-
per setting of the gain control.
To
ensure
continuous sound output with the head
unit at a high volume, set amplifier gain
control to a
level
appropriate for the preout
maximum output
level
of the head unit,
so
that volume can remain unchanged and to
control excess output.
• Despite correct volume and gain settings,
the unit sound still cuts out periodically.
In
such cases, please contact the nearest
authorized Pioneer Service Station.
Gain control
of
this
unit
GAIN
NORMA~
Preout level: 2 V
~
~
(Standard: 500 mV)
6.5V
0.2V
Above illustration shows NORMAL gain set-
ting.

Section
(~s_e_H_in_g~t_h_e_u_n_it
___________________________
)GI
Relationship between amplifiergain
and head
unit
output
power
Head
unit volume steps
Head
unit volume steps
Amplifier gain
------~
Amplifier gain
(normal) (maximum)
If amplifier gain is raised improperly, this will
simply increase distortion, with little increase
in
power.
Signal waveform when outputting
at
high volume using amplifiergain
control
• ••••
Equal
power
•••
Amplifier
gain
-----·Amplifier
gain
(normal)
(maximum)
Signal waveform distorted with high output, if
you raise the gain of the amplifierthe power
changes only slightly.(!]
En
(I)

Section
m(Connecting the units
Connection
diagram
Q) Special red battery wire
RD-223 (sold separately)
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amplifierto the positive((±)) battery
terminal.
® Ground wire (Black)
RD-223 (sold separately)
Connect to metal body or chassis.
® Car stereo with RCA output jacks (sold sepa-
rately)
@ External output
® Connecting wire with RCA pin plugs (sold se-
parately)
® Speaker inputterminal (use a connector in-
cluded)
Please
see the following section for speaker
connection instructions. Refer to Connections
when using the speaker input wire on page
8.
(/) RCA input jack
® System remote control wire (sold separately)
Connect male terminal of this wire to the
sys-
tem remote control terminal of the car stereo.
mEn
)
The female terminal can be connected to the
auto-antenna relay control terminal. If the car
stereo lacks a system remote control terminal,
connect the male terminal to the power term-
inal via the ignition switch.
® Speaker output terminals
Please
see the following section for speaker
connection instructions. Refer to Connections
when using the speaker input wire
on page 8.
@) Fuse (25 A) x 2
@ Fuse (30 A) x 2
@Grommet
@ Rear side
@ Front side[!)
Before connecting the
amplifier
AwARNING
• Secure the wiring with cable clamps or adhe-
sive tape.
To protect the wiring, wrap sections
in contact with metal parts in adhesive tape.
• Never cut the insulation of the power supply
to feed power to other equipment. Current ca-
pacity of the wire is limited.
A cAUTION
• Never shorten any wires, the protection circuit
may malfunction.
• Never ground speaker wire directly or band to-
gether multiple speakers' negative
(8) lead
wires.
• If the system remote control wire of
the ampli-
fier
is connected to the power terminal via the
ignition switch
(12 V DC), the amplifier will re-
main on with the ignition whetherthe car
stereo
is on or off, which may exhaust battery
if the engine
is at rest or idling.
• Install and route the separately sold battery
wire
as far as possible from the speaker wires.
Install and route the separately sold battery
wire, ground wire, speaker wires and the am-
plifier
as far away as possible from the anten-
na, antenna cable and
tuner.[!)

Section
(_c_o_n_n_e_c_ti_n~g_t_h_e_u_n_i_ts
__________________________
~)CIJ
About
bridged
mode
Diagram
A-
Proper
Pioneer
A
mp
lifier
4
Q
Bndged
Mode
Diagram
B-
Improper
L$
Pi
oneer
l\(nplifi~
r
2
Q
Bridged
Mode
Speaker impedance is max. 4
n,
please carefully
check. Improper connection to the amplifier may
result
in
malfunction or personal injury due to
burns from overheating.
For
bridged mode for a two-channel amplifier,
with a 4 n load, either wire two 8n speakers in
parallel, Left
EB
and Right 8 (Diagram A) or use a
single 4 n speaker.
For
other amplifiers, please
follow the speaker output connection diagram for
bridging shown
on
rear:
two 8n speakers
in
par-
allel for a 4
n
load or a single 4
n
speaker per
channel.
For
any further enquiries, contact your local
authorized Pioneer dealer or customer
service.[!]
About
suitable
specification
of
speaker
Ensure speakers conform to the following
standards, otherwise there
is
a risk of fire,
smoke or damage. Speaker impedance is 2n
to 8n
for
stereo connection,
or
4n to 8 n for
monaural and other bridge connection.
Subwoofer
Two-channel output Nominal input:
Min. 130W
One-channel output Nominal input:
Min. 400W
Other
than
subwoofer
Tw
o-c
hannel output MAX input:
Min.
25
0 W
On
e-channel output MAX input:
Min. 800W
Connecting
the
speakers
The speaker output mode can
be
two-channel
(stereo) or one-channel (mono). Connect the
speaker leads to suit the mode according to
the figures shown below.
lWo-channel
output
(Stereo)
Q)
Speaker (left)
(?)
Speaker (Right)
One-channel
output
CD
Q)
Speaker (Mono)[!]
En
CIJ

Section
liD
(Connecting
the
units
Connections
when
using
the
speaker
input
wire
Connect the car stereo speaker
output
wires
to the
amplifier
using the supplied speaker
input
wire.
• Do not connect both the RCA
input
and the
speaker
input
at the same time.
CD
CD
Car Stereo
® Speaker output
G)
White/black:
Left
8
@
White:
Left<±>
® Gray/black: Right 8
®
Gray:
Right (f)
(f) Speaker input connector
To
speaker input terminal of this unit. 0
Connecting
the
power
terminal
The use of a special red battery and
ground
wire RD-223, available separately, is recom-
mended. Connect the battery wire directly
to
the
car
battery positive terminal
(f)
and
the
ground
wire
to
the
car
body.
AwARNING
If
the battery wire
is
not securely fixed to the term-
inal using the terminal screws, there
is
a risk of
overheating, malfunction
and
injury, including
minor burns.
1 Route battery wire from engine com-
partment to the vehicle interior.
After
completing
all other
amplifier
connec-
tions, finally connect the battery wire terminal
(])En
of the
amplifier
to the positive
((f))
battery
terminal.
CD
Positive ((f)) terminal
® Engine compartment
G)
Vehicle interior
@
Fuse
(30
A)
x
2
® Insert the 0-ring rubber grommet into the
vehicle
body.
® Drill a
14
mm
(1
/2in.) hole into the vehicle
body.
2 Twist the battery wire, ground wire
and
system
remote control wire.
Twist
-------·
3 Attach
lugs
to wire
ends.
Use pliers, etc., to
crimp
lugs to wires.
CD
Lug
(sold separately)
® Battery wire
G)
Ground wire
4 Connect the wires to the terminal.
Fix
the wires securely with the terminal
screws.
)

Section
(~~_o_n_n_e_d_i_n_g_t_h_e_u_n_i_ts
____________________________
)(ll
CD
System remote control terminal
@ Ground terminal
® Power terminal
G) Terminal screws
® Battery wire
® Ground wire
(J)
System remote control wireC!J
Connecting
the
speaker
output
terminals
1
Use
wire
cutters
or
a
utility
knife
to
strip
the
end
of
the
speaker wires
to
ex-
pose
about
10mm (3/8in.)
of
wire
and
then
twist
the
wire.
Twist
T
10
mm
(3/8 inch)
2 Attach lugs
to
wire
ends.
Use pliers, etc.,
to
crimp
lugs
to
wires.
CD
Lug
(sold separately)
@
Speaker wire
3 Connect
the
speaker wires
to
the
speaker
output
terminals.
Fix
the
speaker
wires
securely
with
the
term-
inal screws.
CD
Terminal screws
@
Speaker wires
® Speaker output
terminals[!)
~
m
::::s
cc
-
iii'
:::r
En
ffi

Section
m(
Installation
Before installing the amplifier
A
wARNING
•
To
ensure proper installation, use the supplied
parts in the manner specified.
If
any parts
other than those supplied are used, they may
damage internal parts of the amplifier.
or
be-
come loose causing the amplifier to shut
down.
•
Do
not install
in:
-Places where it could injure the driver
or
passengers if the vehicle stops suddenly.
-Places where it may interfere with the dri-
ver,
such
as
on the floor
in
front of the dri-
ver's seat.
• Install tapping screws in such a way that the
screw tip does not touch any wire. This
is
im-
portant to prevent wires from being
cut
by
vi-
bration of the car,which can result in fire.
• Make sure that wires do not get caught in the
sliding mechanism of the seats or touch the
legs of a person in the vehicle
as
short-circuit
may result.
• When drilling to install the amplifier, always
confirm no parts are behind the panel and
protect all cables and important equipment
(e.
g.
fuel/brake lines, wiring) from damage.
A
cAUTION
•
To
ensure proper heat dissipation of the ampli-
fier, ensure the following during installation:
-Allow adequate space above the amplifier
for proper ventilation.
-
Do
not cover the amplifier with a floor mat
or
carpet.
• Protection function may activate to protect the
amplifier against overheating due to installa-
tion in locations where sufficient heat cannot
be
dissipated, continuous use under high-vo-
lume conditions, etc.
In
such cases, the am-
plifier shuts down until it h
as
cooled to a
certain designated temperature.
• Avoid routing wires through hot areas, such
as
near the heater outlet. Heat may damage
the insulation, resulting
in
a short-circuit
through the vehicle body.
@En
•
The
optimal installation location differs
de-
pending on the car model. Secure the ampli-
fier at a sufficiently rigid location.
)
• Firstly make temporary connections and
check to ensure the amplifier and system op-
erate properly.
• After installing the amplifier, confirm
that
the
spare tire, jack and tools can
be
easily re-
moved.~
Example
of
installation
on
the
floor
mat
or
chassis
1
Place
the amplifier
in
the desired instal-
lation location.
Insert the supplied tapping screws
(4
mm
x
18
m
m)
into the screw holes and push on the
screws with a screwdriver
so
they make an im-
print where the installation holes are to
be
lo-
cated.
2 Drill 2.5
mm
(1/8 in.) diameter holes
at
the imprints either
on
the carpet or directly
on
the
chassis.
3 Install the amplifier
with
the
use
of
supplied tapping
screws
(4 mm x 18 mm).
CD
Tapping-screws
(4
mm
x
18
mm)
®
Drill a
2.5
mm
(1
/8 in.) diameter hole
®
Floor mat or
chassis~

~--~~~----~~~--------~--------------------------------------------~Ap~ndix
(_A_d_d
__
it_io_n_a_l_i_n_f_o_rm
__
a_t_io_n
____________________________
)
Specifications
Pow
er source
........
.
....................
1
4.4
V
DC
(10
.8
V to
15
.1 V
a
ll
owa
bl
e)
Grounding system
.......
..
.
.........
Negative type
Current consump
tio
n ...
.........
29
A (at continuous power,
40)
Average current
dr
awn
.........
8 A
(4
0 for two channels)
14
A (4 0 for o
ne
channe
l)
Fuse
.........................
.
......................
25 A x 2
Dimensions (W x H x D)
...
28
9 mm x
62
mm
x
34
9
mrn
(
11
-3/8 i
n.
x
2-1
/2 in. x 1 ft.
2 in.)
Weight
....
...
.
...
..
......
..
......
..
...
....
.
....
.3.2
kg
(7
.1 lbs)
(Le
ad
s for
wir
ing not
in
-
clud
ed)
Maximum power output
.......
82
0W (
41
0W
x
2)
Continuous power output .
..
125
W x 2 (at 1
4.4
V,
40.
20
Hz
to
20
k
Hz,
~
1
.0
% THD
+N
)
40
0W
x
1 (at
14.4V,
40
BR
IDGE
1k
H
z.
~
1
.0%
THD
+
N)
1
90
W
x
2
(a
t 1
4.4
V. 2
n.
1kHz
.
~
1.0%
THD+N
)
Load
i
mp
edance
......................
40
(2
0 to 8 0 a
ll
owa
bl
e)
Frequency response
....
..
.........
10Hz to
70
k
Hz
(
+0dB
.-
3
dB
)
Signal-to-noise ratio
...............
98
dB
(I
HF
-A
netwo
rk)
Distortion
..............
..
.....................
0.0
5 % (10
W.
1 kH
z)
Low pass filte
r:
Cut off frequen
cy
..
........
.
40
Hzto
500
Hz
Cut off slope
.....................
- 12 dB/oct
Bass boost:
Frequen
cy
................
.
.........
50
Hz
Le
vel
.....................................
0 dB/6 dB/
12
dB
Gain control:
RCA
......................................
20
0
mV
to
6.5
V
Speaker
..
........
..
........
..
...
..
...
0.8 Vto
26
V
Maximum input level
I
impedanc
e:
RC
A
...........
....
..
.
..
........
.
......
..
.
6.5
VI
22
kn
Speaker
..............................
26
VI
22
kO
CEA2006
Specifications
Power output
.............................
125 W
RMS
x 2
Ch
annels
(a
t 1
4.4
V.
40 and
~
1%
THD+N
)
S/N ratio
.......
..
......................
..
......
78
dBA (reference: 1W into
40)
Notes
•
Sp
ec
ifications and the design are subject to
modifications without notic
e.
•
The
average current drawn
is
nearly the max
i-
mum
current
dr
awn by this unit when
an
audio signal
is
input. Use this value when
working out total current drawn by multiple
po
wer amplifiers.
[!)
m
::::s
co
(i)"
:::r
En
®

Register yourproduct at
Enregistrez votre produit au
Registre su producto en
http://www.pioneerelectronics.com
See "Visit our website"page
Voir
Ia
page
"Visitez notre site Web"
Consulte
Ia
pagina sobre "Visite nuestro sitio Web"
PIONEER CORPORATION
1-1,
Shin-ogura,
Saiwai-ku, Kawasaki-shi,
Kanagawa
212-0031,
JAPAN
PIONEER ELECTRONICS
(USA)
INC.
P.O.
Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: [phone]
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1
, B-9120 Melsele, Belgium/Belgique
TEL: [phone]
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: [phone]
PIONEER ELECTRONICS
AUSTRALIA
PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202 Australia
TEL: [phone]
PIONEER ELECTRONICS
OF
CANADA,
INC.
340 Ferrier Street, Unit
2,
Markham, Ontario L3R 2Z5, Canada
TEL: [phone]
TEL: [phone]
PIONEER ELECTRONICS DE MEXICO, S.A.
de
C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.
Lomas de Chapultepec, Mexico,
D.
F.
11000
TEL: [phone]
S'cat8sttstfil~lH16.1
iS
~tm
P-J~~Jil67tm4o7~a•
II!~
:
(02)
2657-3588
S'cal.f-(lf5i)fi!JR~6]
:fi
;i
fL
ftl~
~~
P1l51V
;i#iXti!
.?f
iBi
1t
'i=!
{~,
9.901-6~
II!~
:
(0852)
2848-6488
<KNAZX>
<11
COOOOO>
©
2011
PIONEER
CORPORATION.
All
rights reserved.
©
2011
PIONEER
CORPORATION.
Tous
droits
de
reproduction et
de
traduction
reserves.
Printed
in
China
lmprime
en
Chine
<5707000005480> uc

P1oneer
PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONIQUES
DU
CANADA, INC.
GARANTIE LIMITEE , ,
GARANTIE
VALIDE
SEULEMENT
DANS
LE
PAYS
OU
LE
PRODUIT
A
ETE
ACHETE
GARANTIE
Pioneer Electronics (USA) Inc. (PUSA) et Pioneer
~lectronique
du Canada, Inc. (POC) garantissent que les produits distribues par PUSA aux
~tats-Unis
etpar POC au Canada qui, apres
avoir ete installes et utilises conforrnement au manuel de l'utilisateur inclus avec
I'
unite, ne fonctionnent pas de fa90n appropriee dans des conditions d'utilisation norrnales en raison d'un
vice defabrication, seront repares
ou
remplaces parune unite devaleurcomparable,au choix de PUSA
ou
de POC, sans quevous deviezpayer pourles pieces ou les travaux de reparation.
Les unites ou pieces de rechange fournies en vertu de
Ia
presente garantie peuvent Atre neuves ou remises
a
neuf, au choix de PUSA ou de POC.
LA
PRESENTE
GARANnE
UMITEE
S"APPUQUE
AU
PROPRIETAIRE
INmAL
AINSI
QU'A
TOUT
PROPRIETAIRE
SUBSEQUENT
DU
PRESENT
PRODUIT
PIONEER
PENDANT
LA
PERIODE
DE
GARANnE,
A
CONDinON
QUE
LE
PRODUIT
AIT
ETE
ACHETE
CHEZ
UN
DISTRIBUTEUR
OU
MARCHAND
PIONEER
AUTORISE
AUX
ETATS-UNIS
OU
AU
CANADA.
VOUS
DEVREZ
FOURNIR
UN
RELEVE
DE
CAISSE
OU
UNE
AUTRE
PREUVE
D'ACHAT
VALl
DE
INDIQUANT
LA
DATE
DE
L'ACHAT
INITIAL
OU,
Sl
VOUS
LOUEZ
LE
PRODUIT,
VOTRE
CONTRA
T
DE
LOCATION
INDIQUANT
L'ENDROIT
ET
LA
DATE
DE
LA
PREMIERE
LOCA
nON.
Sl
JAMAIS
UN
SERVICE
DE
REPARATION
EST
REQUIS,
LE
PRODUIT
DOlT
~TRE
EXPEDIE
PENDANT
LA
PERIODE
DE
GARANnE,
EN
PORT
PREP
AYE,
A
L'INTERIEUR
DU
PAYS
OU
L'ACHAT
A
ETE
EFFECTUE
SEULEMENT,
TEL
QU'IL
EST
EXPLIQUE
DANS
LE
PRESENT
DOCUMENT.
VOUS
~TES
RESPONSABLE
DU
DEMONT
AGE
ET
DE
L'INSTALLAnON
DU
PRODUIT.
PUSA
OU
POC,
LE
CAS
ECHEANT,
PAIERA
POUR
VOUS
RETOURNER
LE
PRODUIT
REPARE
OU
REMPLACE,
A
L'INTERIEUR
DU
PAYS
OU
L'ACHAT A
ETE
EFFECTUE.
PERIODE
DE
GARANTIE DES PRODUITS Pieces Main-d'atuvre
Produits
stereo
pour
l'auto
1
an
1
an
La
periode
de
garantie pour
les
clientsqui louent
le
produit commence
le
jour
ou
le
produitest utilise pour
Ia
premierefois
(a)
pendant
Ia
periode
de
location
ou
(b)
apres
Ia
vente
au
detail,
selon
ce
qui
se
produit
en
premier.
ELEMENTS NON COUVERTS
PAR
LA
GARANTIE
UN
PRODUIT ACHETE CHEZ
UN
DISTRIBUTEUR NON AUTORISE N'EST COUVERT PAR AUCUNE GARANTIE EXPRESSE
OU
IMPLICITE, Y COMPRIS QUELQUE GARANTIE
IMPLICITE
DE
QUALITE MARCHANDE
OU
D'ADAPTATION A
UN
USAGE PARTICULIER QUE
CE
SOIT.
DE
PLUS,
CE
PRODUIT EST STRICTEMENT
VENDU"
TEL
QUEL"
ET
" AVEC TOUS SES DEFAUTS EVENTUELS
".
PIONEER N'EST PAS RESPONSABLE
DE
QUELQUE DOMMAGE CONSECUTIF ET(OU) INDIRECT QUE CE SOIT.
PIONEER
NE
GARANTIT PAS LES PRODUITS ENUMERES CI-DESSUS LORSQU'ILS SONT UTILISES A DES FINS COMMERCIALES
OU
PROFESSIONNELLES,
OU
AU SEIN
DE
TOUTE APPLICATION INDUSTRIELLE
OU
COMMERCIALE QUE CE SOIT.
LA PRESENTE GARANTIE
NE
S'APPLIQUE PAS Sl LE PRODUIT A ETE SOUMIS A UNE PUISSANCE NOMINALE EXCEDANT CELLE QUI A ETE ETABLIE DANS LES
DOCUMENTS S'Y APPLIQUANT.
LA PRESENTE GARANTIE
NE
COUVRE PAS LES TELEVISEURS
OU
LES ECRANS ENDOMMAGES
EN
RAISON
DE
L'APPLICATION D'IMAGES STATIQUES ET IMMOBILES
PENDANT
DE
LONGUES PERIODES (IMAGES REMANENTES).
LA PRESENTE GARANTIE
NE
COUVRE PAS LE COFFRAGE
OU
LES ELEMENTS ESTHETIQUES, LES ANTENNES INSTALLEES PAR L'UTILISATEUR, LES DOMMAGES AUX
DISQUES
OU
AUX RUBANS
OU
DISQUES D'ENREGISTREMENT, LES DOMMAGES AU PRODUIT DECOULANT D'UNE RETOUCHE, D'UNE MODIFICATION NON AUTORISEE
PAR ECRIT PAR PIONEER, D'UN ACCIDENT, D'UN USAGE INAPPROPRIE
OU
D'UN USAGE ABUSIF, LES DOMMAGES PRODUITS PAR LA FOUDRE
OU
LA SURTENSION,
LES DOMMAGES SUBSEQUENTS DECOULANT
DE
FUITES, LES DOMMAGES DECOULANT
DE
PILES DEFECTUEUSES
OU
DE
L'UTILISATION
DE
PILES NON
CONFORMES
A
CELLES QUI SONT SPECIFIEES DANS LE MANUEL
DE
L'UTILISATEUR.
LA PRESENTE GARANTIE
NE
COUVRE PAS LE COOT DES PIECES
OU
DE
LA MAIN-D'CEUVRE QUI SERAIENT AUTREMENT OFFERTES SANS FRAIS
EN
VERTU
DE
LA
PRESENTE GARANTIE, Sl ELLES SONT OBTENUES AUPRES D'UNE SOURCE AUTRE QU'UNE SOCIETE
DE
SERVICE
OU
AUTRE AUTORISEE
OU
DESIGNEE PAR
PIONEER. LA PRESENTE GARANTIE NE COUVRE PAS LES DEFECTUOSITES
OU
LES DOMMAGES CAUSES PAR L'UTILISATION D'UNE MAIN-D'CEUVRE
OU
DE
PIECES
NON
AUTORISEES, Nl D'UN ENTRETIEN INADEQUAT.
LES NUMEROS
DE
SERlE MODIFIES, OBLITERES
OU
ENLEVES ANNULENT LA PRESENTE GARANTIE DANS SA TOTALITE.
INVALIDITE
DE
TOUTE AUTRE GARANTIE
AUX ETATS-UNIS- PIONEER LIMITE
SES
OBLIGATIONS
EN
VERTU
DE
TOUTE GARANTIE IMPLICITE QUE
CE
SOIT.l.
Y COMPRIS ENTRE AUTRES LES GARANTIES IMPLICITES
DE
QUALITE MARCHANDE
OU
D'ADAPTATION A
UN
USAGE PARTICULIER, A UNE PERIODE N'EXCEDANT PAS LA Pt:RIODE
DE
GARANTIE. AUCUNE GARANTIE
NE
S'APPLIQUE
APRES LA PERIODE
DE
GARANTIE. CERTAINS ETATS
NE
PERMETTENT PAS LA LIMITATION
DE
LA DUREE D'UNE GARANTIE IMPLICITE, ET CERTAINS NE PERMETTENT PAS
L'EXCLUSION
OU
LA
LIMITATION DES DOMMAGES CONSECUTIFS
OU
INDIRECT$. LES LIMITATIONS ET EXCLUSIONS ETABLIES CI-DESSUS PEUVENT DONC NE PAS
S'APPLIQUER
A
VOUS. LA PRESENTE GARANTIE VOUS DONNE DES
DROrrs
LEGAUX SPECIFIQUES. VOUS POUVEZ JOUIR D;AUfRES DROITS, QUI PEUVENT VARIER D'UN
ETAT A L'AUTRE.
AU
CANADA-
SOUS RESERVE
DE
CE
QUI EST EXPRESSEMENT STIPULE DANS LES PRESENTES, AUCUNE REPRESENTATION, GARANTIE, OBLIGATION
OU
CONDITION,
QU'ELLE SOIT IMPLICITE, OBLIGATOIRE
OU
AUTRE, NE S'APPLIQUE
ACE
PRODUIT.
SERVICE
Pour profiter du service en vertu
de
Ia
garantie aux
~tats
-
Unis
et au Canada, vous
devez
presenter votre releve
de
caisse ou, si vous louez le produit, votre contrat de location
indiquant l'endroit
et
Ia date
de
Ia transaction par le premier proprietaire.
AUX
ETATS-UNIS-
Communiquez avec un des partenaires Pioneer suivants
pour
le
service:
Votre marchand Pioneer autorise -Votre marchand Pioneer peut reparer ou remplacer votre unite, ou bien
vous
diriger vers une societe de service Pioneer autorisee. Votre
rec;u
de caisse devrait enumerer ses coordonnees (numeros de telephone
et
de
telecopieur, courriel,
etc
.
).
Votre societe de service autorisee -Celle-ci peut reparer Ia plupart
des
produits electroniques pour l'auto et vous aviser des options supplementaires qui pourraient s'appliquer.
Veuillez acceder au site
Web
de Pioneer
a
www.pioneerelectronics.com, cliquer sur
l'onglet"
Service and
Support"
et
choisir"
Authorized Service
Locator"
pour trouver Ia societe
de service Pioneer
Ia
plus proche.
Pioneer Electronics
Service-
Ce service peutvous aviser des options de service optimales pourvotre modele
et
votre emplacement geographique. Veuillezconsulter les coordonnees
ci-dessous pour communiquer
avec
Pioneer par telephone, par courrier ou par le biais
de
son site
Web
.
AU
CANADA
-POC a designe un certain nombre de societas de service autorisees partout au Canada
si
jamais
vous avez besoin de services de reparation
pour
votre produit.
Communiquez avec Pioneer
~lectronique
du Canada (les coordonnees se trouvent ci-dessous)
pour
trouver
une societe de service autorisee.
Expedition
de
votre
unite
aux
fins
de
service-
Si vous expediez l'unite, vous
devez
l'emballer soigneusement
et
l'envoyer
a
une societe de service autorisee ou
a
Pioneer,
en port prepaye
et
seton une methode de transport pouvant Atre suivie
et
assuree. Emballez le produit au moyen
de
materiaux coussines adequats
pour
eviter les
dommages
pendant le transport. lncluez votre nom, votre adresse
et
un numero de telephone ou rious pouvons vous
joindre
pendant les heures
de
bureau.
Pour toutes les plaintes
et
problemas aux
~tats-Unis
,
communiquez avec le service de Soutien
a
Ia clientele au 1-800-421-1404. Au Canada, communiquez avec le groupe de
Satisfaction de Ia clientele au 1-877-283-5901.
Pour le raccordement ou le fonctionnement
de
votre unite, ou pour trouver une societe
de
service autorisee, appelez ou ecrivez
a:
AUX
~TATS-UNIS
AU CANADA
PIONEER
ELECTRONICS
SERVICE, INC.
GROUPE
DE SATISFACTION DE
LA
CLIENTELE
P.O.
BOX
1760
PIONEER
~LECTRONIQUES
DU CANADA, INC.
LONG BEACH CALIFORNIA 90801 340 FERRIER
STREET
,
UNIT
2,
1-800-421-1404 MARKHAM, ON L3R 2Z5
[phone]
http://www.
pioneerelectronics.com
1-877-283-5901
http://www.pioneerelectronics.ca
REGLEMENT DES CONFLITS
AUX
ETATS-UNIS-
Sl
un
conflit
se
prodult
entre
vous
et
Pioneer apres Ia
reponse
a
une
demande
inltlale
falte
au
service
de
Soutlen
a
Ia cllent81e,
vous
pouvez
avoir
recours au Programme de
resolution
des
plalntes
de Pioneer
pour
resoudre
le
confllt.
Ce
programme
vous
est
offert
sans
frals.
Vous devez
avolr
recours
au
Programme
de
resolution
des plalntes avant de
vous
prevalolr
de
vos
drolts
ou
de
chercher
reparation en
vertu
du
Titre I de Ia
lol
Magnuson-Moss Warranty-Federal Trade
Commission
Improvement
Act,
15
U.S.C.
2301
et
s.s.
Pour
avoir
recours
au
Programme
de
resolution
des
plalntes,
appelez
au
1
800
421-1404
et
expllquez
au
representant
du
service
a
Ia
clientele
qui
vous
repondra
le
probl8me
auquel
vous
faltes
face
et
les
demarches
que
vous
avez
entreprlses
pour
faire
reparer
le
prodult
pendant
Ia
perlode
de
garantie,
puis
donnez-lul
le
nom
du
dlatributeur
I
marchand
autorlse
aupres
duquel
vous
vous
ttes
procure
le
prodult
Pioneer.
Une
fols
que
votre
plalnte
a ete
expllquee
au
representant,
un
numero
de
resolution
vous
sera
communique.
Pioneer
etudlera
le
confllt
et,
dans
un
d81al de
quarante
(40)
jours
a
pres
Ia
reception
de
votre
plalnte,
(1)
repondra
a
votre
plainte
par
ecrit
pour
vous
avlser
des
demarches
qu'elle
entreprendra
pour
resoudre
le
confllt,
et
lndlquera
combien
de
temps
ces
demarches
prendront
;
ou
(2)
repondra
a
votre
plainte
par
ecrit
pour
vous
lndlquer
les
raisons
pour
lesquelles
elle
n'entreprendra
aucune
demarche.
AU CANADA -
Communiquez
avec
le
dlrecteur
de
Ia
Satisfaction
de Ia
clientele
au
(905)
946-7446
pour
dlscuter
de
votre
plalnte
et
resoudre
rapldement
le
probl8me.
ENREGISTREZLE LIEU
ET
LA
DATE D'ACHATPOUR REFERENCE
UL
TERIEURE
NO.du modele:
______________________
NO.deserie:
___________________________
_
Dated'achat:
Achetede:
-----------------------------
PABEZSOINDEGAffiERCETTEINFOPIMT10NETVOTFEF£Vl.IDAOiATDANSL.NENDROITs0R
<
5727000000271
>
lmprime
en
Chine

PIONEER
ELECTRONICS
(USA) INC. PIONEER
ELECTRONICS
OF
CANADA,
INC.
LIMITED WARRANTY
WARRANTY VALID ONLY
IN
COUNTRY OF PRODUCT PURCHASE
WARRANTY
Pioneer Electronics (USA} Inc. (PUSA}, and Pioneer Electronics
Of
Canada,
Inc.
(POC}, warrant that products distributed by PUSA
in
the U.S.A, and by POC
in
Canada that fail to
function properly under normal use due to a manufacturing defect when installed and operated according to the owner's manual enclosed with the unit will
be
repaired or replaced with a
unit ofcomparable value, at the option
of
PUSA or POC, without charge to you for parts or actual repair work. Replacement units and/or parts supplied under this warranty may be
new or rebuilt at the option
of
PUSA or POC.
THISLIMITEDWARRANTYAPPLIESTOTHEORIGINAL
OR
ANY
SUBSEQUENTOWNEROFTHISPIONEERPRODUCTDURING THE
WARRANTY
PERIODPROVIDEDTHE
PRODUCT
WAS
PURCHASEDFROM
AN
AUTHORIZED PIONEERDISTRIBUTOR/DEALERIN THE U.S.A.
OR
CANADA.
YOU
WILL
BE
REQUIRED
TO
PROVIDEA
SALES
RECEIPT
OR
OTHER
VALID
PROOF
OF
PURCHASESHOWINGTHEDATE
OF
ORIGINALPURCHASEOR, IFRENTED, YOURRENTALCONTRACTSHOWINGTHE
PLACE
ANDDATEOF
FIRSTRENTAL. INTHEEVENTSERVICEISREQUIRED,THEPRODUCTMUST
BE
DELIVEREDWITHINTHEWARRANTYPERIOD,TRANSPORTATIONPREPAID,
ONLY
FROMWITHIN THECOUNTRYOF PURCHASE
AS
EXPLAINEDIN THIS DOCUMENT. YOU
WILL
BE
RESPONSIBLE FOR
REMOVAL
AND
INSTALLATIONOF THE
PRODUCT. PUSA
OR
POC,
AS
APPROPRIATE,
WILL
PAY
TORETURN THEREPAIRED ORREPLACEMENTPRODUCT
TO
YOUWITHIN THE COUNTRYOF PURCHASE.
PRODUCTWARRANTYPERIOD
Car
Stereo
Products
fm§.
1
Year
.!..iJl.Qr
1
Year
The warranty period for retail customers who rent the product commences upon the date product is first put into use
(a)
during the rental period or
(b)
retail sale, whichever occurs first.
WHAT
IS
NOT
COVERED
IFTHIS PRODUCTWASPURCHASEDFROM
AN
UNAUTHORIZEDDISTRIBUTOR,THEREARENOWARRANTIES,EXPRESSORIMPLIED,INCLUDINGTHEIMPUEDWARRANTY
OFMERCHANTABIUTYANDTHEIMPUEDWARRANTY
OFFITNESS
FORA
PARTICULARPURPOSEANDTHIS PRODUCT
IS
SOLDSTRICTLY
"AS
IS"AND''WITH
ALL
FAULTS".
PIONEERSHALLNOTBELIABLEFORANYCONSEQUENTIALANDIORINCIDENTALDAMAGES.
PIONEERDOES NOTWARRANTANYPRODUCTLISTEDABOVEWHEN ITIS USEDINA TRADEORBUSINESSOR
IN
ANYINDUSTRIALORCOMMERCIALAPPLICATION.
THISWARRANTYDOES NOTAPPLYIFTHEPRODUCTHASBEEN SUBJECTEDTOPOWER
IN
EXCESSOFITS PUBLISHEDPOWERRATING.
THISWARRANTYDOES NOTCOVERDISPLAYSCREENS DAMAGED
BY
STATIC, NON-MOVING, IMAGESAPPLIEDFORLENGTHYPERIODS(BURN-IN).
THISWARRANTYDOESNOTCOVERTHECABINETORANY
APPEARANCEITEM,USERATTACHEDANTENNA,ANYDAMAGETORECORDSORRECORDINGTAPESORDISCS,ANY
DAMAGETOTHEPRODUCTRESUL
TINGFROMAL
TERATIONS,MOOIRCATIONSNOTAUTHORIZEDINWRmNGBY
PIONEER,ACCIDENT,MISUSEORABUSE,DAMAGEDUETO
UGHTNINGORTOPOVVERSURGES,SUBSEQUENTDAMAGEFROMLEAKING,DAMAGEFROMINOPERATIVEBATTERIES,ORTHEUSEOFBATTERIESNOTCONFORMNGTOTHOSE
SPECIREDINTHEOWNER'S
MANUAL
THISWARRANTYDOESNOTCOVERTHECOSTOFPARTSORLABORWHICHWOULDBEOTHERWISEPROVIDEDWITHOUTCHARGEUNDERTHISWARRANTYOBTAINEDFROM
ANYSOURCEOTHERTHANAPIONEERAUTHORIZEDSERVICECOMPANYOROTHERDESIGNATEDLOCATION.THSWARRANTYDOESNOTCOVERDEFECTSORDAMAGECAUSED
BYTHE USEOFUNAUTHORIZEDPARTSORLABORORFROMIMPROPERMAINTENANCE.
ALTERED,DEFACED,ORREMOVEDSERIALNUMBERSVOIDTHISENTIREWARRANTY
NOOTHERWARRANTIES
IN THE U.S.A. -
PIONEER
LIMITS
ITS
OBLIGATIONS
UNDER
ANY
IMPLIED
WARRANTIES
INCLUDING,
BUT
NOT
LIMITED
TO, THE
IMPLIED
WARRANTIES
OF
MERCHANTABILITY
ANDFITNESS
FORA
PARTICULARPURPOSE,TOA PERIODNOTTOEXCEEDTHEWARRANTYPERIOD. NOWARRANTIES
SHALLAPPL
YAFTERTHE
WARRANTYPERIOD. SOMESTATESDONOTALLOWLIMITATIONSONHOW
LONGAN
IMPLIED
WARRANTYLASTSANDSOMESTATESDO NOT
ALLOW
THEEXCLUSIONS
ORLIMITATIONSOFINCIDENTALORCONSEQUENTIALDAMAGES,
SO
THE
ABOVE
LIMITATIONSOREXCLUSIONS
MAY
NOT
APPLY
TOYOU. THISWARRANTY
mVES
YOU SPECIFIC
LEGAL
RIGHTS
AND
YOU
MAY
HAVE
OTHERRIGHTS WHICH
MAY
VARY
FROM STATETO STATE.
IN
CANADA-
EXCEPT
AS
EXPRESSLYPROVIDEDHEREIN, THEREARENOREPRESENTATIONS,WARRANTIES, OBLIGATIONSORCONDITIONS,IMPLIED,STATUTORY
OROTHERWISE,
APPLICABLE
TOTHISPRODUCT.
TO OBTAIN SERVICE
In the U.S.A.
or
Canada to receive warranty service you need to present your sales receipt or your rental contract showing place and date
of
original owner's transaction.
.1.L§A
-
Please
contact
one
of
the
following
Pioneer
partners
to
obtain
service:
Your Authorized Pioneer
Dealer-
Your
Pioneer Dealer may repair or replace your unit,
or
refer you to an Authorized Pioneer Service Company.
Your
sales receipt should
list the contact information (phone number, fax, email, etc.}
for
your
Dealer.
Your
Authorized Pioneer Service
Company-
Can perform repairs for
most
Car
Electronics products and can advise other options as applicable. Please access
the
Pioneer website
at
www.pioneerelectronics.com
and click on
Service
and
Support
and
select
Authorized
Service
Locator
to find the nearest
Pioneer
servicer.
Pioneer Electronics
Service-
Can advise the optimal service option for
your
model and geographic location. Please reference the information listed below and phone,
email
or
access the Pioneer website to contact Pioneer.
~-
POC has a number
of
Authorized Service Companies should your product require service. Contact Pioneer o(Canada as listed below to obtain a local service location.
Shipping
Your
Unit
for
Service-
Please package it carefully and send
it,
transportation prepaid by a traceable, insured method, to an Authorized Service Company or Pioneer.
Use adequate padding material to prevent damage in transit. Include your name, address and telephone number where you can be reached during business hours.
On all complaints and concerns
in
the U.S.A. call Customer Support at 1-800-421-1404, or,
in
Canada, call Customer Satisfaction at 1-877-283-5901.
IN
THE U.S.A.
IN
CANADA
For hook-up and operation of your unit or
to
locate
an
For additional information
on
this warranty, please call or write:
Authorized Service Company, please call or write: CUSTOMERSATISFACTIONGROUP
PIONEERELECTRONICSSERVICE,
INC.
PIONEERELECTRONICSOFCANADA,
INC.
P.O. BOX 1760 340FERRIERSTREET,UNIT2,
LONG BEACH, CALIFORNIA 90801 MARKHAM, ON L3R 2Z5
1-800-421-1404 [phone] 1-877-283-5901
http://www.pioneerelectronics.com
http://www.pioneerelectronics.ca
DISPUTERESOLUTION
IN THE
U.S.A.-
Following our response to
any
initial request to Customer Support, should a dispute arise between you and Pioneer, Pioneer makes available its Complaint
Resolution Program to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program
before you exercise
any
rights under,
or
seek
any
remedies, created by Title I of the Magnuson-MossWarranty-Federal Trade Commission Improvement
Act,
15U.S.C.
2301
et
seq
.
To
use the Complaint Resolution Program
call1-800-421-1404
and explain to the customer service representative the problem you are experiencing, steps you have taken
to have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer product
was
purchased. After the complaint
has been explained to the representative, a resolution number will be issued. Within 40 days
of
receiving your complaint, Pioneer will investigate the dispute and will either:
(1} respond to your complaint in writing informing you what action Pioneer will take, and in what time period, to resolve the dispute;
or
(2} respond to your complaint in writing
informing you
why
it will not take
any
action.
IN
CANADA-
Call the Customer Satisfaction Manager at (905} 946-7446 to discuss
your
complaint and to obtain a prompt resolution.
RECORDTHEPLACEANDDATEOFPURCHASEFORFUTUREREFERENCE
Model No.
------------------
Serial No.
-----------------
Purchase Date
________
_
Pu~hasedFrom
-------------------------------------------------------
KEEP THIS INFORMATION AND YOUR SALES RECEIPT
IN
A SAFE PLACE
< 5727000000271 >
Printed
in
China