
(_
B_e_
fo
_r_e_y_o_u_s_
ta
_
rt
____
)
BE SURE
TO
OBSERVE THE FOLLOWING
GUIDELINES:
•
Do
not
turn
up
the
volume
so
high
that
you
can't
hear
what's
around
you.
• Use
caution
ortemporarily
discont
in
ue
use
in
potentia
lly hazar
dous
situations.
•
Do
not
use
headphones
while
operating a
motorized vehicl
e;
the
use
of
headphones
may
create a
traffic
hazard
and
is illegal in
many
areas.[!)
About
This Product
This product is a mono amplifier
for
subwoofer. If
both L (left) and R(right) channels are connected
to
the RCA input
of
this product, output is mixed
becausethis product is a mono amplifier.[!)
Before connecting/
installing
the
amplifier
AwARNING
•
Th
is product contains chemicals known to the
State
of
Ca
lifornia and othergovernmental
en-
tit
ies tocause cancerand birth defects
or
other reproducti
ve
harm.
Wash
hands
aner
handling.
• Slots and openings in
the
cabinet are provided
for
ventilation to ensure reliable operation
of
the product, and to protect it from overheat-
ing.
To
prevent fire hazard, the openings
should never
be
bl
ocked
or
covered with items
(such as papers, floor mat, cloths).
• This
unit
is
for
vehicles with a 12Vbattery and
negative grounding. Before installing in
re-
creational vehicles, trucks
or
buses, check the
batteryvoltage.
• When installing this unit, make sure to con-
nectthe ground wi
re
first. Ensure thatthe
ground wire is properly connected to metal
parts
of
the car's body.The ground wire of the
one
of
this
unit
must be connected to the car
separatelywith differentscrews. If the screw
En
for
the ground wire loosens
or
falls out,
it
could result in f
ir
e,
generation
of
smoke
or
malfunction.
• Be sure to install thefuse
to
the battery wire.
• Always use a fuse
of
the rating prescribed.
The use of an improperfuse could result in
overheating and smoke, damage tothe pro-
duct
and injury, including burns.
• Check the connections of the power supply
and speakers if thefuse
of
the separately sold
battery wire
or
the amplifierfuse blows. Dete
r-
mine and resolve the cause, then replace the
fuse with and identical equivalent.
• Always install the amplifieron a flat surface.
Do not install the amplifieron a surface that
is notflat
or
on a surface with a protrusion.
Doing so could result in
ma
l
funct
ion.
• When installing the amplifier,
do
not allow
parts such as extra screwsto get caught
be-
tween the amplifierand the automobile.
Doing so could cause malfunction.
• Do not allowthis
unit
to
come into contact
with liquids. Electrical shock could result.
Also, damage to
th
is unit, smoke, and
over-
heating could resultfrom contact with liquids.
The surfaces of the amplifierand any attached
speakers may also heat up and cause
minor
burn
s.
•
In
the event
of
any abnormality, the power
supply
to
the amplifier is
cut
off
to
prevent
equipment malfunction. If this occurs, switch
the system poweroff and check the power
supply and speaker connections. Ifyou are un-
able to determinethe cause, please contact
you
r dealer.
• Always disconnectthe negative 8 terminal
of
the battery beforehand to avoid the risk of
electric shock
or
short circuit during installa-
tion.
• Do notattempt
to
disassemble
or
modifythis
unit. Doing so may result in fi
re
,electric
shock
or
other
ma
lfunction.