
IMPORTANT SAFETY INSTRUCTIONS
1)
Read
these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do
not use this apparatus near water.
6)
Clean only with dry cloth.
7)
Do
not block any ventilation openings. Install
in
accordance with the manufacturer's
instructions.
8)
Do
not install near any heat sources such
as
radiators, heat
reg
is
ters, stoves, or other
apparatus (including amplifiers) that produce
heat.
9)
Do
not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong.
The
wide blade orthe third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult
an
electrician for replacement of the obsolete outlet.
1
0)
Protect the power cord from being walked
on
or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
NOTE:
11)
Only use attachments/accessories specified
by
the manufacturer.
12)
Use only with the cart, stand, tripod, bracket, or
table specified
by
the manufacturer, or sold with
the apparatus. When a cart
is
used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13)
Unplug this apparatus during lightning storms
or when unused for long periods of time.
14)
Refer all servicing to qualified service personnel.
Servicing
is
required when the apparatus has
been damaged
in
any
way,
such
as
power-supply
cord or plug
is
damaged, liquid has been spilled
or objects
have
fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
03-7-13-69
_
En
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15
of the
FCC
Rules. These limits are designed to provide reasonable protection against harmful interference
in
a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used
in
accordance with the instructions, may cause harmful interference to radio communications. However,
there
is
no guarantee that interference will not occur
in
a particular installation. If this equipment does cause
harmful interference to radio ortelevision reception, which can
be
determined
by
turning the equipment off and
on,
the user
is
encouraged to try to correct the interference
by
one or more of the following measures:
-Reorient
or relocate the receiving antenna.
-Increase
the separation between the equipment and receiver.
-Connect
the equipment into an outlet
on
a circuit different from that to which the receiver
is
connected.
-Consult
the dealer or
an
experienced radio/TV technician for help.
Information
to
User
Alterations or modifications carried out without
appropriate authorization may invalidate the user's
right to operate the equipment. D8-10-2_
A1
_
En
CAUTION
This product satisfies
FCC
regulations when shielded
cables and connectors are used to connect the unit
to other equipment.
To
prevent electromagnetic
interference with electric appliances such
as
radios
and televisions, use shielded cables and connectors
for connections. D8-10-3a_A1_En
D8-10-1-2_
A1
_
En
IMPORTANT NOTICE
THE
MODEL NUMBER AND SERIAL NUMBER
OF
THIS EQUIPMENT
ARE
ON
THE
REAR
OR
BOTTOM
.
RECORD
THESE
NUMBERS
ON
YOUR
ENCLOSED
WARRANTY CARD AND
KEEP
IN
A
SAFE
PLACE
FOR
FUTURE
REFERENCE.
D36-AP9-1_
A1
_
En
This product contains mercury. Disposal of this
material may
be
regulated due to environmental
considerations.
For
disposal or recycling information,
please contact your local authorities orthe Electronics
Industries Alliance: www.eiae.org. K057_
A1
_
En