Pioneer AVH-X7500BT Mounting instructions

AVH-X7500BT Firmware Update for iPhone® 5 Compatibility (August 2013)
This firmware update applies only to AVH-X7500BT units sold in the United States and Canada and
provides AppRadio Mode support and Video playback for the iPhone® 5 and fifth generation iPod®
touch. If you do not own an iPhone 5 or fifth generation iPod touch, there is no need to install this
update.
In order to perform this update, the following items are needed:
• Pioneer AVH-X7500BT DVD Receiver
• USB storage device
• Pioneer CD-IV202AV VGA/USB Interface cable for iPod/iPhone (sold separately)
• Lightning to USB Cable and Lightning to VGA adapter (Apple Inc. products, sold
separately)
The following preparatory steps must first be undertaken in order to connect an iPhone 5 with lightning
connector to your unit and use AppRadio Mode.
A. Download the firmware update files from Pioneer's website
B. Update the firmware on your unit
C. Connect your iPhone 5 to your unit using a VGA/USB interface cable for iPod/iPhone
(CD-IV202AV, sold separately)
D. Pair and connect your iPhone 5 with your unit via Bluetooth wireless technology
Once Steps Athrough D have been completed, the [Apps] key on the Home screen will become
active, allowing the user to switch to AppRadio Mode.
NOTE:
This firmware update will provide enhanced iPhone 5 compatibility to enable AppRadio Mode;
however, due to a change in communication with the Pandora internet radio app, album art will no
longer be available when using Pandora. If you have already performed the May 2013 version of
this firmware update and want to improve the stability of your Pandora experience, you will
need to download the updated files and begin at Step 15 to perform the PEH409A.bin update.
IMPORTANT
ziPod source is not available when using an iPhone 5 in AppRadio Mode. When you want to play
music and/or video files on your iPhone 5, please first install CarMediaPlayer on your iPhone 5
and then launch CarMediaPlayer while in AppRadio Mode.
zWhen using AppRadio Mode while simultaneously listening to the Bluetooth Audio source or a

compatible music application in the background, there will be slight delay in the touchscreen
response of the Pioneer in-dash multimedia unit, so it is not necessary to press the touchscreen
repeatedly. Pausing the background audio, or selecting an audio source other than an app or
Bluetooth Audio, such as Radio, CD, or Satellite Radio, will restore the AppRadio Mode
touchscreen response time.
A. Downloading the Firmware Update Files
IMPORTANT
Please download and print these Firmware Update instructions before downloading and installing the
firmware update. It is very important that you complete all steps correctly and the order described
below.
WARNING! This firmware update applies only to AVH-X7500BT units sold in the US and
Canada.
Note: If you have any difficulty carrying out these instructions, or wish to have this update
performed by Pioneer, please contact the Pioneer Customer Support Center toll free at (800)
421-1404 during regular business hours (M-F 10AM- 7:30PM Eastern Time, excluding holidays)
for assistance. If this firmware update is performed by Pioneer, there is a charge of $60.00 (this
charge includes return shipping of the updated unit within the U.S.). Charges for
removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
PROCEDURE
1. Download the firmware update files by clicking on the following link and finding your
product: http://www.pioneerelectronics.com/PUSA/Support/Downloads
2. Extract the download file.
The downloaded file will produce the following two files when decompressed: “PDB101.bin”
and “PEH409A.bin”
Once the file download is complete, locate the file on your hard drive and then double click the
file to decompress it. If you do not have a file decompression utility installed on your computer,
you may download WinZip at http:/www.winzip.com (a purchase may be required).

B. Updating the Firmware on Your Unit
IMPORTANT
zPlease DO NOT perform this firmware update if the model number of your Pioneer in-dash
multimedia unit is anything other than AVH-X7500BT.
¾The model number for the AVH-X7500BT is to the right of the ‘TRACK UP’ button along the
bottom edge of the front panel.
zThere are two separate firmware updates that must be performed: the PDB software update and
PEH software update.
zIt is necessary to copy only one update file onto a USB storage device at a time.
zUSB storage device requirements:
¾USB specification 2.0 and 128 MB or larger, preferably from a major manufacturer.
¾Should be blank (should not contain any files) and formatted in FAT32.
zEnsure that the update file is located within the root (top) folder of your USB storage device. There
should be no other files within the USB storage device.
zWhile your unit is being updated, DO NOT turn off the system’s power and DO NOT touch the
unit’s touch panel screen. Failure to heed this warning may result in severe damage to your unit.
zDO NOT remove the USB storage device during the firmware update process.
zPerforming the firmware update will restore all settings to their default values.
zDisconnect any external mobile devices that are currently connected to your unit.
BEFORE UPDATING
Updating the firmware of your unit will result in the following changes.
¾The “Pandora Connect Mode” --- “Wired” , “Bluetooth” options under the setting menu will change
to “Pandora connection” --- “ iPhone” , “Android” after the update.
¾The “RGB Input” --- “iPhone”, ”NAVI” options under the system setting menu will change to “iPhone
(CD-IU201S)”,”iPhone (VGA adapter)”, and “NAVI” after the updates.
¾RGB Input can only be set when all of the following conditions are met.
- The USB storage device is not connected to USB/iPod input.
- No Bluetooth connection.
- The source is turned off.

¾The [Apps] icon on the Home screen will be changed
Appears when your iPhone with Lightning connector is connected via the VGA/USB
interface cable for iPod/iPhone (CD-IV202AV) (sold separately).
Appears when your iPhone with Lightning connector is connected via the VGA/USB
interface cable for iPod/iPhone (CD-IV202AV) (sold separately) and processing the
Bluetooth connection.
Appears when your iPhone with Lightning connector is connected via the VGA/USB
interface cable for iPod/iPhone (CD-IV202AV) (sold separately) and Bluetooth wireless
technology.
PROCEDURE
1. Connect a blank (formatted) USB storage device to your computer, and then locate and copy
the “PDB101.bin” file onto the USB storage device.
2. Turn the vehicle’s key to the ACC ON position
3. Remove the front panel and press the reset button with a pen tip or other pointed instrument.
4. Once the unit has completely powered up, turn the vehicle’s key to the ACC OFF position.
5. Turn the vehicle’s key to the ACC ON position while simultaneously pressing and holding the
[MUTE] button and [SRC] button. Your unit will display the ”Software update” screen:
6. Read the terms and conditions carefully and verify the details.

7. Connect the USB storage device to the USB/iPod input port.
Your unit will automatically recognize the PDB software update file:
8. The unit will display the current PDB version as well as the update version contained on the
USB storage device. Confirm that the version shown on the right side of the screen is Ver.
08.10:
The PDB software update process will automatically begin and the update progress is displayed
on screen:

9. Wait until the update process is complete. When the firmware update process is completed, the
unit will display the following screen:
10.Remove the USB storage device from the USB/iPod input port.
11.Remove the front panel and press the reset button with a pen tip or other pointed instrument.
12.Re-attach the front panel to restart this product.
13.Once the unit has completely powered up, turn the vehicle’s key to the ACC OFF position.
14.Connect the USB storage device to your computer and delete the “PDB101.bin” file.
15.Connect a blank (formatted) USB storage device to your computer, and then locate and copy
the “PEH409A.bin” file onto the USB storage device.
16.Turn the vehicle’s key to the ACC ON position while simultaneously pressing and holding the
[MUTE] button and [SRC] button. Your unit will display the ”Software Update” screen.
17.Read the terms and conditions carefully and verify the details again.

18.Connect the USB storage device to the USB/iPod input port.
Your unit will automatically recognize the PEH software update file.
19.The unit will display the current PEH version as well as the update version contained on the
USB storage device. Confirm that the version shown on the right side of the screen is Ver.
08.18.
The PEH software update process will automatically begin and the update progress is displayed
on screen:

20.Wait until the update process is complete. Once the firmware update process is complete, the
unit will display the following screen:
21.Remove the USB storage device from the USB/iPod input port.
22.Remove the front panel and press the reset button with a pen tip or other pointed instrument.
23.Re-attach the front panel to restart this product.
24.The firmware update is now complete.

C. Connecting your iPhone 5 with Lightning Connector
•A Pioneer CD-IV202AV VGA/USB interface cable for iPod/iPhone (sold separately) is required.
•A Lightning to USB Cable (supplied with iPhone 5) and a Lightning to VGA adapter (Apple Inc.
products, sold separately) are also required.
•AppRadio Mode should only be used in the connection configuration shown. Do not use any
other configuration when connecting your device.
PROCEDURE
1. Remove the USB storage device.
2. Disconnect the Bluetooth connection.
3. Turn the source off.
4. Press the home button to switch to the home display.
5. Touch the system key to open the system menu.
6. Touch “RGB Input” on the system menu to select the RGB input.
7. Touch and select “iPhone (VGA adapter)”.

D. Pairing and Connecting Your iPhone 5 via Bluetooth Wireless Technology
IMPORTANT
•If any other device is currently connected to your unit via Bluetooth wireless technology,
please first disconnect that device.
•If you have already registered three Bluetooth devices, you must first delete one of the
registered devices from your unit's memory.
PROCEDURE
1. Activate the Bluetooth function on your iPhone with Lightning connector.
2. Press the home button to switch to the home display.
3. Touch the Bluetooth key.
The “Bluetooth Connection Menu” screen appears.
4. Touch “Connection” on the “Bluetooth Connection Menu”.
The registered device list screen appears.
5. Touch on the registered device list.
The unit will search for nearby Bluetooth devices awaiting a connection and display any
devices that are found in the list.
6. Touch the name of your iPhone with Lightning connector.
This will start the pairing process. Please enter the device’s PIN number if prompted to do so.
(The default PIN number is “0000”.)
Once a Bluetooth connection has been successfully established, the [Apps] key on the Home screen
will become active.
Pioneer Electronics (USA) Inc.
Customer Support Center
[phone] M-F
10:00 AM- 7:30 PM Eastern Time, excluding holidays.
http://www.pioneerelectronics.com
------------------------------------------------------------
©2013 Pioneer Corporation