Pioneer DEH-1300MP User manual

EspañolFrançaisEnglish
Owner’s Manual
Mode d’emploi
Manual de instrucciones
DEH-1300MP
CD RECEIVER
AUTORADIO CD
RADIO CD

Thank you for purchasing this PIONEER
product.
To ensure proper use, please read through this
manual before using this product. It is espe-
cially important that you read and observe
WARNINGs and CAUTIONs in this manual.
Please keep the manual in a safe and accessible
place for future reference.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer-
ence, and (2) this device must accept any inter-
ference received, including interference that
may cause undesired operation.
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the
user’s right to operate the equipment.
For Canadian model
This Class B digital apparatus complies with
Canadian ICES-003.
The Safety of Your Ears is in
Your Hands
Get the most out of your equipment by playing
it at a safe level—a level that lets the sound
come through clearly without annoying blar-
ing or distortion and, most importantly, with-
out affecting your sensitive hearing. Sound
can be deceiving. Over time, your hearing
“comfort level”adapts to higher volumes of
sound, so what sounds “normal”can actually
be loud and harmful to your hearing. Guard
against this by setting your equipment at a
safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
!Set your volume control at a low setting.
!Slowly increase the sound until you can
hear it comfortably and clearly, without dis-
tortion.
!Once you have established a comfortable
sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING
GUIDELINES:
!Do not turn up the volume so high that you
can’t hear what’s around you.
!Use caution or temporarily discontinue use
in potentially hazardous situations.
!Do not use headphones while operating a
motorized vehicle; the use of headphones
may create a traffic hazard and is illegal in
many areas.
About this unit
The tuner frequencies on this unit are allo-
cated for use in North America. Use in other
areas may result in poor reception.
WARNING
Handling the cord on this product or cords asso-
ciated with accessories sold with the product
may expose you to chemicals listed on proposi-
tion 65 known to the State of California and other
governmental entities to cause cancer and birth
defect or other reproductive harm. Wash hands
after handling.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS
WITH THIS PRODUCT WILL INCREASE
EYE HAZARD.
En
2
Section
01 Before You Start

CAUTION
!Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, damage to this unit, smoke, and over-
heating could result from contact with liquids.
!Always keep the volume low enough to hear
outside sounds.
!Avoid exposure to moisture.
!If the battery is disconnected or discharged,
any preset memory will be erased.
Important (Serial number)
The serial number is located on the bottom of
this unit. For your own security and convenience,
be sure to record this number on the enclosed
warranty card.
After-sales service for
Pioneer products
Please contact the dealer or distributor from
where you purchased this unit for after-sales
service (including warranty conditions) or any
other information. In case the necessary infor-
mation is not available, please contact the
companies listed below:
Please do not ship your unit to the companies
at the addresses listed below for repair without
advance contact.
U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411
For warranty information please see the Lim-
ited Warranty sheet included with this unit.
In case of trouble
Should this unit fail to operate properly, please
contact your dealer or nearest authorized
PIONEER Service Station.
Visit our website
http://www.pioneerelectronics.com
in Canada
http://www.pioneerelectronics.ca
!Learn about product updates (such as firm-
ware updates) for your product.
!Register your product to receive notices
about product updates and to safeguard
purchase details in our files in the event of
loss or theft.
!Access owner's manuals, spare parts infor-
mation, service information, and much
more.
En 3
English
Section
01
Before You Start

Head unit
a 6789bcd
123 4 5
Button Button
1E (EQ/LOUD) 81to 6
2h(eject) 9(clock)
3AUDIO aa/b/c/d
4SRC/OFF bFUNC
5Disc loading slot cD (DISP/SCRL)
6Detach button dB (BAND/ESC)
7AUX input jack (3.5
mm stereo jack)
Remote control
Operation is the same as when using the but-
tons on the head unit. See the explanation of
the head unit about the operation of each but-
ton with the exception of ATT, which is ex-
plained below.
Part State
eVOLUME
(+/-)
Press to increase or decrease vo-
lume.
fATT Press to mute. Press again to un-
mute.
Part State
ge(pause) Press to pause or resume play-
back.
hSRC
(source)
Press to cycle through all the
available sources. Press and hold
to turn the source off.
Display indication
3
2
1
4 5 6 7
Indicator State
1
Main dis-
play sec-
tion
!Tuner: band and frequency
!Built-in CD player: elapsed
playback time and text infor-
mation
2
Preset
number/
track num-
ber
!The track number or preset
number.
!If a track number 100 or more
is selected, don the left of
the track number indicator
will light.
3MP3/
WMA
The type of the currently playing
file.
4RPT Repeat play is turned on.
5LOUD Loudness is on.
65(stereo) Receiving the stereo broadcast-
ing.
7LOC Local seek tuning is on.
En
4
Section
02 Operating this unit

Use and care of the remote
control
Using the remote control
1Point the remote control in the direction of the
front panel to operate.
When using for the first time, pull out the film
protruding from the tray.
Replacing the battery
1Slide the tray out on the back of the remote con-
trol.
2Insert the battery with the plus (+) and minus (–)
poles aligned properly.
WARNING
!Keep the battery out of the reach of children.
Should the battery be swallowed, consult a
doctor immediately.
!Batteries (battery pack or batteries installed)
must not be exposed to excessive heat such
as sunshine, fire or the like.
CAUTION
!Use one CR2025 (3 V) lithium battery.
!Remove the battery if the remote control is not
used for a month or longer.
!There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
!Do not handle the battery with metallic tools.
!Do not store the battery with metallic objects.
!If the battery leaks, wipe the remote control
completely clean and install a new battery.
!When disposing of used batteries, comply
with governmental regulations or environmen-
tal public institutions’rules that apply in your
country/area.
!“Perchlorate Material –special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate. (Applicable to California, U.S.A.)”
Important
!Do not store the remote control in high tem-
peratures or direct sunlight.
!The remote control may not function properly
in direct sunlight.
!Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
Basic Operations
Important
!Handle gently when removing or attaching
the front panel.
!Avoid subjecting the front panel to excessive
shock.
!Keep the front panel out of direct sunlight and
high temperatures.
!To avoid damage to the device or vehicle inter-
ior, remove any cables and devices attached
to the front panel before detaching it.
En 5
English
Section
02
Operating this unit

Removing the front panel to protect your unit from
theft
1Press the detach button to release the front
panel.
2Push the front panel upward and pull it toward
you.
3Always keep the detached front panel in a protec-
tion device such as a protection case.
Re-attaching the front panel
1Slide the front panel to the left.
Make sure to insert the tabs on the left side of the
head unit into the slots on the front panel.
2Press the right side of the front panel until it is
firmly seated.
If you cannot attach the front panel to the head
unit successfully, make sure that you are placing
the front panel onto the head unit correctly. For-
cing the front panel into place may result in da-
mage to the front panel or head unit.
Turning the unit on
1Press SRC/OFF to turn the unit on.
Turning the unit off
1Press SRC/OFF and hold until the unit turns off.
Selecting a source
1Press SRC/OFF to cycle through the sources
listed below:
TUNER (tuner)—CD (built-in CD player)—AUX
(AUX)
Adjusting the volume
1Turn SRC/OFF to adjust volume.
CAUTION
For safety reasons, park your vehicle when remov-
ing the front panel.
Note
When this unit’s blue/white lead is connected to
the vehicle’s auto-antenna relay control terminal,
the vehicle’s antenna extends when this unit’s
source is turned on. To retract the antenna, turn
the source off.
Menu operations identical
for function settings/audio
adjustments/initial settings
Returning to the ordinary display
Canceling the initial setting menu
!Press B (BAND/ESC).
You can also cancel initial settings by holding
down SRC/OFF until the unit turns off.
Tuner
Basic Operations
Selecting a band
1Press B (BAND/ESC) until the desired band (F1,
F2,F3 for FM or AM) is displayed.
Manual tuning (step by step)
1Press cor d.
Seeking
1Press and hold cor d, and then release.
You can cancel seek tuning by briefly pressing c
or d.
While pressing and holding cor d, you can skip
stations. Seek tuning starts as soon as you re-
lease cor d.
Storing and recalling stations
for each band
%When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
Stored radio station frequency can be recalled
by pressing the preset tuning button.
#Press aor bto recall radio station frequen-
cies.
En
6
Section
02 Operating this unit

Function settings
%Press FUNC to select the function.
After selecting, perform the following proce-
dures to set the function.
BSM (best stations memory)
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
Storing broadcast frequencies with BSM may replace
broadcast frequencies you have saved using 1to 6.
1Press ato turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
To cancel the storage process, press b.
LOCAL (local seek tuning)
Local seek tuning lets you tune in to only those radio
stations with sufficiently strong signals for good re-
ception.
1Press aor bto turn local seek tuning on or off.
2Press cor dto set the sensitivity.
FM: LOCAL 1—LOCAL 2—LOCAL 3—LOCAL 4
AM: LOCAL 1—LOCAL 2
The highest level setting allows reception of only
the strongest stations, while lower levels allow the
reception of weaker stations.
CD
Basic Operations
Playing a CD/CD-R/CD-RW
1Insert the disc into the disc loading slot with the
label side up.
Ejecting a CD/CD-R/CD-RW
1Press h.
Selecting a folder
1Press aor b.
Selecting a track
1Press cor d.
Fast forwarding or reversing
1Press and hold cor d.
When playing compressed audio, there is no
sound during fast forward or reverse.
Switching between compressed audio and CD-DA
1Press B (BAND/ESC).
Displaying text information
Selecting the desired text information
1Press D (DISP/SCRL).
Scrolling the text information to the left
1Press and hold D (DISP/SCRL).
Notes
!Depending on the version of iTunes used to
write MP3 files to a disc or media file types, in-
compatible text stored within an audio file
may be displayed incorrectly.
!Text information items that can be changed
depend on the media.
Function settings
%Press FUNC to select the function.
After selecting, perform the following proce-
dures to set the function.
RPT (repeat play)
1Press cor dto select the repeat range.
DSC –Repeat all tracks
TRK –Repeat the current track
FLD –Repeat the current folder
RDM (random play)
1Press aor bto turn random play on or off.
When random play is on, RDM appears in the dis-
play.
If you turn random play on during folder repeat,
FRDM appears in the display.
SCAN (scan play)
Scan play searches for a song within the selected re-
peat range.
1Press ato turn scan play on.
If you turn scan play on during FLD,FSCN ap-
pears in the display.
2When you find the desired track press bto turn
scan play off.
If the display has automatically returned to the
playback display, select SCAN again by pressing
FUNC.
After scanning of a disc (folder) is finished, nor-
mal playback of the tracks begins.
PAUSE (pause)
1Press aor bto pause or resume.
SRTRV (sound retriever)
En 7
English
Section
02
Operating this unit

Automatically enhances compressed audio and re-
stores rich sound.
1Press aor bto select your favorite setting.
OFF (off)—1—2
1is effective for low compression rates, and 2is
effective for high compression rates.
FF/REV (fast forward/reverse)
You can switch the search method between fast for-
ward/reverse and searching every 10 tracks. Selecting
ROUGH enables you to search every 10 tracks.
1Press dto select ROUGH.
FF/REV –Fast forward and reverse
ROUGH –Searching every 10 tracks
To select FF/REV, press c.
2Press B (BAND/ESC) to return to the playback dis-
play.
3Press and hold cor dto search every 10 tracks
on a disc (folder).
If the rest of track number is less than 10, press
and hold cor drecalls the first (last) one.
Audio Adjustments
Audio Adjustments
%Press AUDIO to select the audio func-
tion.
After selecting, perform the following proce-
dures to set the audio function.
FAD (fader/balance adjustment)
1Press aor bto adjust fader (front/rear speaker
balance).
2Press cor dto adjust the balance (left/right
speaker balance).
BASS/MID/TREBLE (equalizer adjustment)
!Adjusted equalizer curve settings are stored in
CUSTOM.
1Press aor bto adjust the level.
Adjustment range: +6 to -6
LOUD (loudness)
Loudness compensates for deficiencies in the low-
and high-frequency ranges at low volume.
1Press aor bto turn loudness on or off.
2Press cor dto select the desired setting.
LOW (low)—HI (high)
!You can also turn loudness on or off by pressing
and holding E (EQ/LOUD).
SLA (source level adjustment)
SLA (Source Level Adjustment) lets you adjust the vo-
lume level of each source to prevent radical changes
in volume when switching between sources.
!When selecting FM as the source, you cannot
switch to SLA.
!Settings are based on the FM volume level, which
remains unchanged.
!The AM volume level can also be adjusted with
this function.
1Press aor bto adjust the source volume.
Adjustment range: SLA +4 to SLA –4
Using the equalizer
%Press E (EQ/LOUD) to select the equali-
zer.
DYNAMIC—VOCAL—NATURAL—CUSTOM
—FLAT—POWERFUL
!CUSTOM allows you to create a customized
setting.
Other Functions
Adjusting initial settings
1 Press SRC/OFF and hold until the unit
turns off.
2 Press SRC/OFF and hold until the clock
appears in the display.
3 Press FUNC to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
Setting the clock
1Press cor dto select the segment of the clock
display you wish to set.
Hour—Minute
2Press aor bto put a clock right.
AUX (auxiliary input)
Activate this setting when using an auxiliary device
connected to this unit.
1Press aor bto turn auxiliary setting on or off.
En
8
Section
02 Operating this unit

Displaying the clock
%Press to turn the clock display on or
off.
#The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Using an AUX source
1 Insert the stereo mini plug into the
AUX input jack.
2 Press SRC/OFF to select AUX as the
source.
#AUX cannot be selected unless the auxiliary
setting is turned on. For more details, refer to
AUX (auxiliary input) on the previous page.
En 9
English
Section
02
Operating this unit

Connections
WARNING
!Use speakers over 50 W (output value) and be-
tween 4 Wto 8 W(impedance value). Do not
use 1 Wto 3 Wspeakers for this unit.
!The black cable is ground. When installing
this unit or power amp (sold separately), make
sure to connect the ground wire first. Ensure
that the ground wire is properly connected to
metal parts of the car’s body. The ground wire
of the power amp and the one of this unit or
any other device must be connected to the car
separately with different screws. If the screw
for the ground wire loosens or falls out, it
could result in fire, generation of smoke or
malfunction.
Ground wire
Metal parts of car’s body
POWER AMP
Other devices
(Another electronic
device in the car)
Important
!When installing this unit in a vehicle without
an ACC (accessory) position on the ignition
switch, failure to connect the red cable to the
terminal that detects operation of the ignition
key may result in battery drain.
O
N
S
T
A
R
T
O
F
F
ACC position No ACC position
!Use this unit with a 12-volt battery and nega-
tive grounding only. Failure to do so may result
in a fire or malfunction.
!To prevent a short-circuit, overheating or mal-
function, be sure to follow the directions
below.
—Disconnect the negative terminal of the
battery before installation.
—Secure the wiring with cable clamps or ad-
hesive tape. Wrap adhesive tape around
wiring that comes into contact with metal
parts to protect the wiring.
—Place all cables away from moving parts,
such as the gear shift and seat rails.
—Place all cables away from hot places,
such as near the heater outlet.
—Do not connect the yellow cable to the bat-
tery by passing it through the hole to the
engine compartment.
—Cover any disconnected cable connectors
with insulating tape.
—Do not shorten any cables.
—Never cut the insulation of the power cable
of this unit in order to share the power
with other devices. The current capacity of
the cable is limited.
—Use a fuse of the rating prescribed.
—Never wire the negative speaker cable di-
rectly to ground.
—Never band together negative cables of
multiple speakers.
!When this unit is on, control signals are sent
through the blue/white cable. Connect this
cable to the system remote control of an exter-
nal power amp or the vehicle’s auto-antenna
relay control terminal (max. 300 mA 12 V DC).
If the vehicle is equipped with a glass anten-
na, connect it to the antenna booster power
supply terminal.
!Never connect the blue/white cable to the
power terminal of an external power amp.
Also, never connect it to the power terminal of
the auto antenna. Doing so may result in bat-
tery drain or a malfunction.
En
10
Section
03 Installation

This unit
123 4
1Antenna input
2Fuse (10 A)
3Power cord input
4Rear output
Power cord








1
8
9
c
d
6
32
4
5
7
a
b
e
f
h
g
LR
F
R
1To power cord input
2Left
3Right
4Front speaker
5Rear speaker
6White
7White/black
8Gray
9Gray/black
aGreen
bGreen/black
cViolet
dViolet/black
eBlack (chassis ground)
Connect to a clean, paint-free metal location.
fYellow
Connect to the constant 12 V supply terminal.
gRed
Connect to terminal controlled by ignition
switch (12 V DC).
hBlue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Note
With a 2 speaker system, do not connect anything
to the speaker leads that are not connected to
speakers.
Power amp (sold separately)
Perform these connections when using the
optional amplifier.




1
4
2
55
3
1System remote control
Connect to Blue/white cable.
2Power amp (sold separately)
3Connect with RCA cables (sold separately)
4To Rear output
5Rear speaker
Installation
Important
!Check all connections and systems before
final installation.
!Do not use unauthorized parts as this may
cause malfunctions.
!Consult your dealer if installation requires dril-
ling of holes or other modifications to the vehi-
cle.
!Do not install this unit where:
—it may interfere with operation of the vehi-
cle.
—it may cause injury to a passenger as a re-
sult of a sudden stop.
En 11
English
Section
03
Installation

!The semiconductor laser will be damaged if it
overheats. Install this unit away from hot
places such as near the heater outlet.
!Optimum performance is obtained when the
unit is installed at an angle of less than 60°.
60°
DIN front/rear mount
This unit can be properly installed using either
front-mount or rear-mount installation.
DIN Front-mount
1 Insert the mounting sleeve into the
dashboard.
For installation in shallow spaces, use the sup-
plied mounting sleeve. If there is enough
space, use the mounting sleeve that came
with the vehicle.
2 Secure the mounting sleeve by using a
screwdriver to bend the metal tabs (90°)
into place.
1
2
1Dashboard
2Mounting sleeve
3 Install the unit as illustrated.
Use commercially available parts when instal-
ling.
1
2
3
4
5
1Nut
2Firewall or metal support
3Metal strap
4Screw
5Screw (M4 × 8)
#Make sure that the unit is installed securely in
place. An unstable installation may cause skip-
ping or other malfunctions.
DIN Rear-mount
1 Determine the appropriate position
where the holes on the bracket and the
side of the unit match.
2 Tighten two screws on each side.
1
2
3
1Screw
2Mounting bracket
3Dashboard or console
Use either truss (5 mm × 8 mm) or flush sur-
face (5 mm × 9 mm) screws, depending on
the bracket screw holes.
En
12
Section
03 Installation

Removing the unit
1 Remove the trim ring.
1Trim ring
2Notched tab
!Releasing the front panel allows easier ac-
cess to the trim ring.
!When reattaching the trim ring, point the
side with the notched tab down.
2 Insert the supplied extraction keys into
both sides of the unit until they click into
place.
3 Pull the unit out of the dashboard.
Removing and re-attaching the front
panel
You can remove the front panel to protect your
unit from theft.
Press the detach button and push the front
panel upward and pull it toward you.
For details, refer to Removing the front panel to
protect your unit from theft and Re-attaching
the front panel on page 6.
Securing the front panel
The front panel can be secured with the sup-
plied screw.
1
1Screw
En 13
English
Section
03
Installation

Troubleshooting
Symptom Cause Action
The display
automatically
returns to the
ordinary dis-
play.
You did not per-
form any opera-
tion within about
30 seconds.
Perform operation
again.
The repeat play
range changes
unexpectedly.
Depending on
the repeat play
range, the se-
lected range may
change when se-
lecting another
folder or track, or
when fast for-
warding/rever-
sing.
Select the repeat
play range again.
A subfolder is
not played
back.
Subfolders can-
not be played
when FLD (folder
repeat) is se-
lected.
Select another re-
peat play range.
NO XXXX ap-
pears when a
display is chan-
ged (NO T-TTL,
for example).
There is no text
information em-
bedded.
Switch the display
or play another
track/file.
The unit is mal-
functioning.
There is inter-
ference.
You are using a
device, such as a
cellular phone,
that transmits
electric waves
near the unit.
Move electrical de-
vices that may be
causing the inter-
ference away from
the unit.
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the
error message.
Message Cause Action
ERROR-11, 12,
17, 30
The disc is dirty. Clean the disc.
The disc is
scratched.
Replace the disc.
Message Cause Action
ERROR-10, 11,
12, 15, 17, 30,
A0
There is an elec-
trical or mechan-
ical error.
Turn the ignition
switch OFF and
back ON, or switch
to a different
source, then back
to the CD player.
ERROR-15 The inserted disc
is blank
Replace the disc.
ERROR-23 Unsupported CD
format
Replace the disc.
FRMTREAD Sometimes there
is a delay be-
tween the start of
playback and
when you start to
hear any sound.
Wait until the mes-
sage disappears
and you hear
sound.
NO AUDIO The inserted disc
does not contain
any playable
files.
Replace the disc.
PROTECT All the files on
the inserted disc
are embedded
with DRM.
Replace the disc.
SKIPPED The inserted disc
contains DRM
protected WMA
files.
Replace the disc.
Handling guideline
Discs and player
Use only discs featuring either of following two logos.
Use 12-cm disc. Do not use 8-cm disc or an adapter
for 8-cm disc.
En
14
Appendix
Additional Information

Use only conventional, fully circular discs. Do not use
shaped discs.
Do not insert anything other than a CD into the CD
loading slot.
Do not use cracked, chipped, warped, or otherwise
damaged discs as they may damage the player.
Unfinalized CD-R/CD-RW disc playback is not possi-
ble.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
Avoid leaving discs in excessively hot environments
including under direct sunlight.
Do not attach labels, write on or apply chemicals to
the surface of the discs.
To clean a CD, wipe the disc with a soft cloth outward
from the center.
Condensation may temporarily impair the player’s
performance. Leave it to adjust to the warmer tem-
perature for about one hour. Also, wipe any damp
discs with a soft cloth.
Playback of discs may not be possible because of
disc characteristics, disc format, recorded applica-
tion, playback environment, storage conditions, and
so on.
Road shocks may interrupt disc playback.
DualDiscs
DualDiscs are two-sided discs that have a recordable
CD for audio on one side and a recordable DVD for
video on the other.
Since the CD side of DualDiscs is not physically com-
patible with the general CD standard, it may not be
possible to play the CD side with this unit.
Frequent loading and ejecting of a DualDisc may re-
sult in scratches on the disc. Serious scratches can
lead to playback problems on this unit. In some
cases, a DualDisc may become stuck in the disc load-
ing slot and will not eject. To prevent this, we recom-
mend you refrain from using DualDisc with this unit.
Please refer to the information from the disc manu-
facturer for more detailed information about Dual-
Discs.
Compressed audio
compatibility
WMA
File extension: .wma
Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps to 384
kbps (VBR)
Sampling frequency: 32 kHz to 48 kHz
Windows Media Audio Professional, Lossless, Voice:
No
MP3
File extension: .mp3
Bit rate: 8 kbps to 320 kbps (CBR), VBR
Sampling frequency: 8 kHz to 48 kHz (32, 44.1, 48 kHz
for emphasis)
Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3, 2.4 (ID3
tag Version 2.x is given priority over Version 1.x.)
M3u playlist: No
MP3i (MP3 interactive), mp3 PRO: No
WAV
File extension: .wav
Quantization bits: 8 and 16 (LPCM), 4 (MS ADPCM)
Sampling frequency: 16 kHz to 48 kHz (LPCM), 22.05
kHz and 44.1 kHz (MS ADPCM)
Supplemental information
Only the first 32 characters can be displayed as a file
name (including the file extension) or a folder name.
This unit may not operate correctly depending on the
application used to encode WMA files.
There may be a slight delay when starting playback of
audio files embedded with image data.
Disc
Playable folder hierarchy: up to eight tiers (A practical
hierarchy is less than two tiers.)
Playable folders: up to 99
Playable files: up to 999
En 15
English
Appendix
Additional Information

File system: ISO 9660 Level 1 and 2, Romeo, Joliet
Multi-session playback: Yes
Packet write data transfer: No
Regardless of the length of blank section between the
songs of the original recording, compressed audio
discs play with a short pause between songs.
Sequence of audio files
The user cannot assign folder numbers and
specify playback sequences with this unit.
Example of a hierarchy






Level 1 Level 2 Level 3 Level 4
01
02
03
04
05
: Folder
: Compressed
audio file
01 to 05: Folder
number
1to 6: Playback
sequence
Disc
!Folder selection sequence or other opera-
tion may differ depending on the encoding
or writing software.
Copyright and trademark
iTunes
Apple and iTunes are trademarks of Apple
Inc., registered in the U.S. and other coun-
tries.
MP3
Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use
this product in any commercial (i.e. revenue-
generating) real time broadcasting (terrestrial,
satellite, cable and/or any other media), broad-
casting/streaming via internet, intranets and/
or other networks or in other electronic con-
tent distribution systems, such as pay-audio or
audio-on-demand applications. An indepen-
dent license for such use is required. For de-
tails, please visit
http://www.mp3licensing.com.
WMA
Windows Media and the Windows logo are tra-
demarks or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
This product includes technology owned by
Microsoft Corporation and cannot be used or
distributed without a license from Microsoft
Licensing, Inc.
Specifications
General
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Maximum current consumption
..................................................... 10.0 A
Dimensions (W × H × D):
DIN
Chassis ..................... 178 mm × 50 mm × 165
mm
(7 in. × 2 in. × 6-1/2 in.)
Nose ........................... 188 mm × 58 mm × 17 mm
(7-3/8 in.× 2-1/4 in.× 5/8 in.)
D
Chassis ..................... 178 mm × 50 mm × 165
mm
(7 in.× 2 in.× 6-1/2 in.)
Nose ........................... 170 mm × 46 mm × 17 mm
(6-3/4 in.× 1-3/4 in.× 5/8 in.)
Weight .......................................... 1.3 kg (2.9 lbs)
Audio
Maximum power output ....... 50 W × 4
Continuous power output ... 22 W × 4 (50 Hz to 15 000
Hz, 5 % THD, 4 Wload, both
channels driven)
Load impedance ...................... 4W(4 Wto 8 Wallowable)
Preout maximum output level
..................................................... 2.0 V
Tone controls:
Bass
Frequency ................ 100 Hz
Gain ............................ ±12 dB
En
16
Appendix
Additional Information

Mid
Frequency ................ 1 kHz
Gain ............................ ±12 dB
Treble
Frequency ................ 10 kHz
Gain ............................ ±12 dB
CD player
System .......................................... Compact disc audio system
Usable discs .............................. Compact disc
Signal-to-noise ratio ............... 94 dB (1 kHz) (IHF-A net-
work)
Number of channels .............. 2 (stereo)
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11, 12
(2ch audio)
(Windows Media Player)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WAV signal format .................. Linear PCM & MS ADPCM
FM tuner
Frequency range ...................... 87.9 MHz to 107.9 MHz
Usable sensitivity ..................... 11 dBf (0.7 μV/75 W, mono,
S/N: 30 dB)
Signal-to-noise ratio ............... 72 dB (IHF-A network)
AM tuner
Frequency range ...................... 530 kHz to 1 710 kHz
Usable sensitivity ..................... 25 μV (S/N: 20 dB)
Signal-to-noise ratio ............... 62 dB (IHF-A network)
CEA2006 Specifications
Power output ............................. 14 W RMS × 4 Channels (4
Wand ≦1 % THD+N)
S/N ratio ....................................... 91 dBA (reference: 1 W into
4W)
Note
Specifications and the design are subject to mod-
ifications without notice.
En 17
English
Appendix
Additional Information

PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: [phone]
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: [phone]
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: [phone]
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: [phone]
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada
TEL: [phone]
TEL: [phone]
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: [phone]
ܜ䢦㙵ӑ᳝䰤݀ৌ
㐑݀ৌ˖ ৄ࣫ᏖЁቅ࣫䏃Ѡ↉ 44 㰳13 ῧ
䳏䁅˖ [phone]
ܜ䢦䳏ᄤ˄佭␃˅᳝䰤݀ৌ
佭␃б啡ᇪ≭ఈ⍋␃ඳϪ⬠ଚὁЁᖗ
9ῧ901-6 ᅸ
䳏䁅˖ [phone]
Printed in Thailand
Imprimé en Thaïlande
<QRD3061-A/N> UC
Published by Pioneer Corporation. Copyright ©2010 by Pioneer Corporation. All rights reserved.
Publié par Pioneer Corporation. Copyright ©2010 par Pioneer Corporation. Tous droits réservés.
<KNAZX> <10F00000>

PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONIQUES DU CANADA, INC.
Main-d'ceuvre
1 an
GARANTIE L1MITl~E . . .
GARANTIE VALIDE SEULEMENT DANS LE PAYS OU LE PRODUIT A ETE ACHETE
GARANTIE
Pioneer Electronics (USA) Inc. (PUSA) et Pioneer Electronique du Canada, Inc. (POC) garantissent que les produits distribues par PUSA aux Etats-Unis et par POC au Canada qui, apres
avoir ete installes
et utilises conformement au manuel de I'utilisateur inclus avec I'unite, ne fonctionnent pas de favon appropriee dans des conditions d'utilisation normales en raison d'un
vice de fabrication, seront repares ou remplaces par une unite de valeurcomparable, au choix de
PUSA ou de POC, sans que vousdeviez payer pour les pieces ou les travaux de reparation.
Les unites ou pieces de rechange fournies en vertu de la presente garantie peuvent etre neuves ou remises aneuf, au choix de PUSA ou de POCo
LA PRESENTE GARANTIE L1MITEE S'APPLIQUE AU PROPRIETAIRE INITIALAINSI QU'A TOUT PROPRIETAIRE SUBSEQUENT DU PRESENT PRODUIT PIONEER PENDANT LA PERIODE DE GARANTIE.
A CONDITION QUE LE PRODUIT AIT ETE ACHETE CHEZ UN D1STRIBUTEUR OU MARCHAND PIONEER AUTORISE AUX ETATS-UNIS OU AU CANADA. VOUS DEVREZ FOURNIR UN RELEVE DE CAISSE
OU UNE AUTRE PREUVE D'ACHAT VAll DE INDIQUANT LA DATE DE L'ACHAT INITIAL OU, 51 VOUS LOUEZ LE PRODUIT, VOTRE CO NT RAT DE LOCATION INDIQUANT L'ENDROIT ET LA DATE DE
LA PREMIERE LOCATION. 51 JAMAIS UN SERVICE DE REPARATION EST REQUIS. LE PRODUIT DOlT ETRE EXPEDIE PENDANT LA PERIODE DE GARANTIE, EN PORT PREPAYE. AL'INTERIEUR DU
PAYS OU L'ACHAT A ETE EFFECTUE SEULEMENT. TEL QU'IL EST EXPLIQUE DANS LE PRESENT DOCUMENT. VOUS ETES RESPONSABLE DU DEMONTAGE ET DE L'INSTALLATION DU PRODUIT.
PUSA OU POC, LE CAS ECHEANT, PAIERA POUR VOUS RETOURNER LE PRODUIT REPARE OU REMPLACE. AL'INTERIEUR DU PAYS OU L'ACHAT A ETE EFFECTUE.
PERIODE DE GARANTIE DES PRODUITS Pieces
Produits stereo pour I'auto 1 an
La periode de garanne pour les clients qui lauent Ie produit commence Ie jour au Ie produ~ esl utilise pour la premiere fois (a) pendant la penode de location au (b) apres la vente au detail, selan ce qui se praduit en premier.
ELEMENTS NON COUVERTS PAR LA GARANTIE
UN PRODUIT ACHETE CHEZ UN DISTRIBUTEUR NON AUTORISE N'EST COUVERT PAR AUCUNE GARANTIE EXPRESSE OU IMPLICITE, YCOMPRIS QUELQUE GARANTIE
IMPLICITE DE QUALITE MARCHANDE OU D'ADAPTATION Po. UN USAGE PARTICULIER QUE CE SOIT, DE PLUS, CE PRODUIT EST STRICTEMENT VENDU .. TEL QUEL .. ET
.. AVEC TOUS SES DEFAUTS EVENTUELS ".
PIONEER N'EST PAS RESPONSABLE DE QUELQUE DOMMAGE CONSECUTIF ET(OU) INDIRECT QUE CE SOIT.
PIONEER NE
GARANTIT PAS LES PRODUITS ENUMERES CI-DESSUS LORSQU'ILS SONT UTILISES Po. DES FINS COMMERCIALES OU PROFESSIONNELLES, OU AU SEIN
DE TOUTE APPLICATION INDUSTRIELLE OU COMMERCIALE QUE CE SOIT.
LA PRESENTE GARANTIE NE S'APPLIQUE PAS SI LE PRODUIT AETE SOUMIS
Po. UNE PUISSANCE NOMINALE EXCEDANT CELLE QUI AETE ETABLIE DANS LES
DOCUMENTS S'Y APPLIOUANT.
LA PRESENTE GARANTlE NE COUVRE PAS LES TELEVISEURS
OU LES ECRANS ENDOMMAGES EN RAISON DE L'APPLICATION D'IMAGES STATIOUES ET 1M MOBILES
PENDANT DE LONGUES PERIODES (IMAGES REMANENTES).
LA PRESENTE GARANTIE NE COUVRE PAS LE COFFRAGE OU LES ELEMENTS ESTHETIOUES, LES ANTENNES INSTALLEES PAR L'UTILISATEUR, LES DOMMAGES AUX
DISQUES OU AUX RUBANS OU DISOUES D'ENREGISTREMENT, LES DOMMAGES AU PRODUIT DECOULANT D'UNE RETOUCHE, D'UNE MODIFICATION NON AUTORISEE
PAR ECRIT PAR PIONEER, D'UN ACCIDENT, D'UN USAGE INAPPROPRIE OU D'UN USAGE ABUSIF, LES DOMMAGES PRODUITS PAR LA FOUDRE OU LA SURTENSION,
LES DOMMAGES SUBSEOUENTS
DECOULANT DE FUITES, LES DOMMAGES DECOULANT DE PILES DEFECTUEUSES OU DE L'UTILISATION DE PILES NON
CONFORMES
Po. CELLES QUI SONT SPECIFIEES DANS LE MANUEL DE L'UTILISATEUR.
LA PRESENTE GARANTIE NE COUVRE PAS LE COUT DES PIECES
OU DE LA MAIN-D'CEUVRE QUI SERAIENT AUTREMENT OFFERTES SANS FRAIS EN VERTU DE LA
PRESENTE GARANTlE, SI ELLES SONT OBTENUES AUPRES D'UNE SOURCE AUTRE QU'UNE SOCIETE OE SERVICE OU AUTRE AUTORISEE OU DESIGNEE PAR
PIONEER. LA PRESENTE GARANTIE NE COUVRE PAS LES DEFECTUOSITES OU LES DOMMAGES CAUSES PAR L'UTILISATION D'UNE MAIN-D'CEUVRE OU DE PIECES
NON AUTORISEES,
NI D'UN ENTRETIEN INADEQUAT.
LES NUMEROS DE SERlE MODIFIES, OBLITERES OU ENLEVES ANNULENT LA PRESENTE GARANTIE DANS SA TOTALITE.
INVALIDITE DE TOUTE AUTRE GARANTIE
AUX ETATS-UNIS -PIONEER LIMITE SES OBLIGATIONS EN VERTU DE TOUTE GARANTIE IMPLICITE QUE CE SOIT, YCOMPRIS ENTRE AUTRES LES GARANTIES IMPLICITES
DE QUALITE MARCHANDE OU D'ADAPTATION Po. UN USAGE PARTICULIER, Po. UNE PERIODE N'EXCEDANT PAS LA PERIODE DE GARANTIE. AUCUNE GARANTIE NE S'APPLIQUE
APRES LA PERIODE
DE GARANTIE. CERTAINS ETATS NE PERMETTENT PAS LA LIMITATION DE LA DUREE D'UNE GARANTIE IMPLICITE, ET CERTAINS NE PERMETTENT PAS
L'EXCLUSION au LA LIMiTATiON DES DOMMAGES CONSECUTiFS OU iNDiRECTS. LES LiMiTATIONS ET EXCLUSiONS t:TAi>LiES Ci-IjESSUS PEUvENT DONt; Nt: ..AS
S'APPLIQUER
Po. VOUS. LA PRESENTE GARANTIE VOUS DONNE DES DROITS LEGAUX SPECIFIQUES. VOUS POUVEZ JOUIR D'AUTRES DROITS, QUI PEUVENT VARIER D'UN
ETAT
Po. L'AUTRE.
AU
CANADA -SOUS RESERVE DE CE QUI EST EXPRESSEMENT STIPULE DANS LES PRESENTES, AUCUNE REPRESENTATION. GARANTIE, OBLIGATION OU CONDITION,
QU'ELLE SOIT IMPLICITE, OBLIGATOIRE OU AUTRE. NE S'APPLIQUE Po. CE PRODUIT.
SERVICE
Pour profiter du service en vertu de la garantie aux Etats-Unis et au Canada, vous devez presenter votre rei eve de caisse ou, si vous louez Ie produit. votre contrat de location
indiquant I'endroit et la date de la transaction par Ie premier proprietaire.
AUX ETATS-UNIS - Communiquez avec un des partenaires Pioneer suivants pour Ie service:
Votre marchand Pioneer autorise - Votre marchand Pioneer peut reparer ou remplacer votre unite, ou bien vous diriger vers une societe de service Pioneer autorisee. Votre revu
de caisse devrait enumerer ses coordonnees (numeros de telephone et de telecopieur, courriel, etc.).
Votre societe de service autorisee - Celle-ci peut reparer la plupart des produits electroniques pour I'auto et vous aviser des options supplementaires qui pourraient s'appliquer.
Veuillez acceder au site Web de Pioneer a www.pioneerelectronics.com.cliquer sur I'onglet .. Service and Support .. et choisir " Authorized Service Locator" pour trouver la societe
de service Pioneer la plus proche.
Pioneer Electronics Service - Ce service peut vous aviser des options de service optimales pour votre modele et votre emplacement geographique. Veuillez consulter les coordonnees
ci-dessous pour communiquer avec Pioneer par telephone, par courrier ou par Ie biais de son site Web.
AU CANADA - POC a designe un certain nombre de societes de service autorisees partout au Canada si jamais vous avez besoin de services de reparation pour votre produit.
Communiquez avec Pioneer Electronique du Canada (Ies coordonnees se trouvent ci-dessous) pour trouver une societe de service autorisee.
Expedition de votre unite aux fins de service· Si vous expediez I'unite, vous devez I'emballer soigneusement el I'envoyer a une sociele de service aulorisee ou a Pioneer.
en port prepaye et selon une methode de transport pouvant etre suivie et assuree. Emballez Ie produit au moyen de materiaux coussines adequats pour eviler les dommages
pendanl Ie transport. Incluez volre nom, votre adresse et un numero de telephone ou nous pouvons vous joindre pendant les heures de bureau.
Pour to utes les plaintes el problemes aux Etats-Unis, communiquez avec Ie service de Soutien ala clientele au 1-800-421-1404. Au Canada. communiquez avec Ie groupe de
Satisfaction de la clientele au 1-877-283-5901.
Pour Ie raccordement ou Ie fonctionnement de volre unite. ou pour lrouver une societe de service autorisee, appelez ou ecrivez a:
AUX ETATS-UNIS
PIONEER ELECTRONICS SERVICE, INC.
P.O. BOX 1760
LONG BEACH, CALIFORNIA 90801
1-800-421-1404
http://www.pioneerelectronics.com
AU CANADA
GROUPE DE SATISFACTION DE LA CLIENTELE
PIONEER ELECTRONIQUES DU CANADA, INC
300 ALLSTATE PARKWAY
MARKHAM. ON L3R OP2
[phone]
1-877-283-5901
http://www.pioneerelectronics.ca
<CRY1276-A/N >
Imprime en Tha'ilande
REGLEMENT DES CONFLITS
AUX ETATS·UNIS •Si un conflil se produit entre vous et Pioneer apres la reponse a une demande initiale faite au service de Soutlen ala clientele, vous pouvez avoir
recours au Programme de resolution des plaintes de Pioneer pour resoudre Ie con flit. Ce programme vous est offert sans frals. Vous devez avoir recours au Programme
de resolution des plalntes avant de vous prevaloir de vos droits ou de chercher reparation en vertu du Titre I de la loi Magnuson-Moss Warranty-Federal Trade Commission
Improvement Act, 15 U.S.C. 2301 et S.S.
Pour avoir recours au Programme de resolution des plaintes, appelez au 1 800421-1404 et expliquez au representant du service ala clientele qui vous repondra Ie
probleme auquel vous faites face et les demarches que vous avez entreprises pour faire reparer Ie prodult pendant la peri ode de garantie, puis donnez-Iui Ie nom du
dlstributeur I marchand autorise aupres duquel vous vous etes procure Ie produit Pioneer. Une fois que votre plainte a ete expliquee au representant, un numero de
resolution vous sera communique. Pioneer etudiera Ie conflit et, dans un delai de quarante (40) jours apres la reception de votre plainte, (1) repondra a votre plainte
par ecrit pour vous aviser des demarches qU'elie entreprendra pour resoudre Ie canflit, et indiquera combien de temps ces demarches prendront ; ou (2) repondra
a votre plainte par ecrit pour vous indiquer les raisons pour lesquelles elle n'entreprendra aucune demarche.
AU CANADA - Communiquez avec Ie directeur de la Satisfaction de la clientele au [phone] pour discuter de votre plainte et resoudre rapidement Ie probleme.
ENREGISTREZ LE LIEU ET LA DATE D'ACHAT POUR REFERENCE ULTERIEURE
NO. du modele: NO. de serie : _
Dated'achat: Achelede: _
PRENEZSOINDEGARDERCETTEINFORMATK:JNETVOTRERE<;;UDACHATDANSUNENDROrrSUR

PIONEER ELECTRONICS (USA) INC.
PIONEER ELECTRONICS OF CANADA, INC.
LIMITED WARRANTY
WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE
WARRANTY
Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics Of Canada, Inc. (POC), warrant that products distributed by PUSA in the U.S.A., and by POC in Canada that fail to
function property under normal use due to amanufacturing defect when installed and operated according to the owner's manual enclosed with the unit will
be repaired orreplaced with a
unit
of comparable value, at the option of PUSA or POC, without charge to you for parts or actual repair work. Replacement units and/or parts supplied under this warranty may be
new or rebuilt at the option
of PUSA or POCo
THIS LIMITEDWARRANTYAPPLIESTOTHEORIGINAL OR ANY SUBSEQUENTOWNER OFTHIS PIONEER PRODUCTDURINGTHE WARRANTYPERIODPROVIDEDTHE
PRODUCT
WAS PURCHASEDFROM AN AUTHORIZED PIONEER DISTRIBUTORIDEALER IN THEU.S.A.OR CANADA. YOU WILLBEREQUIREDTO PROVIDEA SALES
RECEIPTOR OTHER VALID PROOFOF PURCHASESHOWING THE DATEOFORIGINALPURCHASE OR, IFRENTED, YOUR RENTAL CONTRACTSHOWING THEPLACE
ANDDATEOF RRST RENTAL. INTHEEVENTSERVICEISREQUIRED,THEPRODUCTMUSTBEDELIVEREDWITHINTHEWARRANTYPERIOD, TRANSPORTATIONPREPAID,
ONLYFROM WITHIN
THE COUNTRY OF PURCHASE AS eXPLAINED INTHIS DOCUMENT. YOU WILL BE RESPONSIBLE FOR REMOVAL AND INSTALLATION OFTHE
PRODUCT. PUSA OR POC, AS APPROPRIATE, WILL PAY TO RETURN THE REPAIRED OR REPLACEMENT PRODUCTTO YOU WITHIN THE COUNTRY OF PURCHASE.
PRODUCT WARRANTY PERIOD ~ LabQr
Car StereQ PrQducts 1 Year 1 Year
The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) duringthe rental period Qr (b) retail sale, whichever occurs first.
WHAT IS NOT COVERED
IFTHISPRODUCTWASPURCHASEDFROM ANUNAUTHORIZEDDISTRIBUTOR,THEREARE NOWARRANTIES,EXPRESS OR IMPLIED,INCLUDINGTHEIMPUEDWARRANTY
OFMERCHANTABIUTYANDTHE IMPLIEDWARRANTYOFRTNESSFOR APARTICULARPURPOSEANDTHISPRODUCTISSOLDSTRICTLY
"AS IS"AND'WITH ALL FAULTS".
PIONEER SHALLNOTBELIABLE
FOR ANYCONSEQUENTIALANDIORINCIDENTALDAMAGES.
PIONEER DOES NOTWARRANTANY PRODUCTLISTEDABOVEWHEN ITISUSED
IN ATRADE OR BUSINESS OR IN ANYINDUSTRIAL OR COMMERCIALAPPLICATION.
THISWARRANTYDOES NOT APPLY IFTHEPRODUCTHASBEEN SUBJECTEDTOPOWER
IN EXCESS OFITSPUBLISHEDPOWER RATING.
THISWARRANTY DOESNOTCOVER DISPLAYSCREENSDAMAGEDBYSTATIC, NON-MOVING,IMAGESAPPLIEDFOR LENGTHYPERIODS(BURN-IN).
THSWARRANTYDOESNOTCOVERTHECABINETORANYAPPEARANCEITEM,USERATTACHEDANTENNA,ANYDAMAGETORECORDSORRECORDINGTAPESORDl5CS,ANY
DAMAGETOTHEPRODUCTRESULTING FROMALTERATIONS, MODIRCATIONSNOTAUTHORIZED
INWRmNG BYPIONEER,ACCIDENT,MISUSE OR ABUSE, DAMAGEDUETO
UGHTNINGOR
TO POWERSURGES,SUBSEQUENTDAMAGEFROMLEAKING,DAMAGE FROM INOPERATlVEBATTERIES,ORTHEU SE OF BATTERIESNOTCONFORMINGTOTHOSE
SPECIREDINTHEOWNER'S
MANUAL
THISWARRANTYDOESNOTCOVERTHECOSTOFPARTSORLABORWHICHWOULDBEOTHERWlSEPROVlDEDWlTHOUTCHARGEUNDERTHISWARRANTYOBTAINEDFROM
ANYSOURCEOTHERTHANA~ONEERAunHORlZEDSERVlCECOMPANYOROTHERDE~GNATEDLOCATIO~~SWARRANTYDOESNOTCOVERDEFECTSORDAMAGECAUSED
BY THEUSEOFUNAUTHORIZEDPARTSORLABOR OR FROM IMPROPERMAINTENANCE.
ALTERED, DEFACED,
OR REMOVEDSERIALNUMBERS VOID THISENTlREWARRANTY
NOOTHERWARRANTIES
IN THE U.S.A. -PIONEER LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITYANDRTNESSFOR APARTICULARPURPOSE,TOAPERIOD
NOTTO EXCEEDTHEWARRANTYPERIOD. NOWARRANTIES SHALLAPPL YAFTERTHE
WARRANTYPERIOD. SOMESTATESDONOTALLOWLIMITATIONSON
HOWLONGAN IMPLIEDWARRANTY LA STSAND SOMESTATESDO NOTALLOWTHE EXCLUSIONS
OR LIMITATIONSOFINCIDENTALOR CONSEQUENTIALDAMAGES.SOTHE ABOVE LIMITATIONSOR EXCLU~ONS MAY NOTAPPLYTO YOU. THISWARRANTYGIVES
YOU SPECIRC LEGAL RIGHTS AND YOU MAYHAVEOTHER RIGHTS WHICH MAYVARY FROM STATE TO STATE.
IN
CANADA -EXCEPTASEXPRESSLYPROVIDEDHEREIN,THEREARE NOREPRESENTATIONS,WARRANTIES, OBLIGATIONSOR CONDITIONS, IMPLIED,STATUTORY
OR OTHERWISE, APPLICABLETO THIS PRODUCT.
TO OBTAIN SERVICE
In the U.S.A. or Canada to receive warranty service you need to present your sales receipt or your rental contract showing place and date of original owner's transaction.
!!SA - Please CQntact one Qf the fQIIQwing PiQneer partners to Qbtain service:
Your Authorized Pioneer Dealer -Your Pioneer Dealer may repair or replace your unit, or refer you to an Authorized Pioneer Service Company. Your sales receipt should
list the contact information (phone number, fax, email, etc.) for your Dealer.
Your Authorized Pioneer Service Company -Can perform repairs
for most Car Electronics products and can advise other options as applicable. Please access the
Pioneer website at
www.piQneerelectrQnlcs.cQm and click on Service and SUPPQrt and select Authorized Service LQcatQr to find the nearest Pioneer servicer.
Pioneer Electronics Service -Can advise the optimal service option for your model and geographic location. Please reference
the information listed below and phone,
email or access the Pioneer website to contact Pioneer.
CANApA -POC has anumberofAuthorized Service Companies should your product require service.Contact Pioneer of Canada as listed below to obtain alocal service location.
Shipping YQur Unit fQr Service -Please package it carefully and send it, transportation prepaid by atraceable, insured method, to an Authorized Service Company or Pioneer.
Use adequate padding material to prevent damage in transit. Include your name, address and telephone number where you can be reached during business hours.
On all complaints and concerns in the U.S.A. call Customer Support at 1-800-421-1404, or, in Canada, call Customer Satisfaction at 1-877-283-5901.
IN THE U.S.A. IN CANAPA
For hook-up and operation
of your unit or to locate an For additional information on this warranty, please call or write:
Authorized Service Company, please call or write: CUSTOMERSATISFACTIONGROUP
PIONEERELECTRONICSSERVICE,INC. PIONEER ELECTRONICS OFCANADA,INC.
P.O. BOX 1760 300
ALLSTATE PARKWAY
LONG BEACH, CALIFORNIA 90801 MARKHAM, ON L3R OP2
1-800-421-1404 [phone] 1-877-283-5901
http://www . pioneerelectronics.com http://www.pioneerelectronics.ca
DISPUTERESOLUTION
IN THE U.S.A. -Following our response to any initial request to Customer Support, should adispute arise between you and Pioneer, Pioneer makes available its Complaint
Resolution Program to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program
before you exercise any rights under,
or seek any remedies, created by Title Iof the Magnuson-MossWarranty-Federal Trade Commission Improvement Act, 15 U.S.C. 2301 et seq.
To use the Complaint Resolution Program call 1-800-421-1404 and explain to the customer service representative the problem you are experiencing, steps you have taken
to have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer product was purchased. After the complaint
has been explained to the representative, aresolution number will be issued. Within 40 days
of receiving your complaint, Pioneer will investigate the dispute and will either:
(1) respond to your complaint in writing informing you
what action Pioneer will take, and in what time period, to resolve the dispute; or (2) respond to your complaint in writing
informing you
why it will not take any action.
IN
CANADA -Call the Customer Satisfaction Manager at [phone] to discuss your complaint and to obtain aprompt resolution.
RECORD THE PLACEAND DATE OFPURCHASE FOR FUTURE REFERENCE
Model
No. Serial No. Purchase Date _
Purchased From _
KEEP THIS INFORMATION AND YOUR SALES RECEIPT
IN ASAFE PLACE <CRY1276-AlN >
Printed in Thailand