Pioneer DEH-3200UB User manual

P,oneer
;....;..;;;;;.;.;;;...;;---------- ..
rn
"
cc
'"
:r
CD RECEIVER
AUTORADIO CD
RADIO CD
DEH-3200UB
..
-
rn
'"
"tl
'"
",
o
~tlPERlft'uMER1I[D
Operation Manual
Mode d'emploi
Manual de instrucciones

(
Contents )
_. -~-----------~-----:~
Thank you for purchasing this PIONEER prodl,jct.
To ensure proper use, please read through this manual before using this product. It
is especially important that you read and observe WARNINGs and CAUTIONs in
this manual. Please keep the manualin a safe and accessible place for ftlture refer·
ence.
<!D Before You Start
Information to User 3
For Canadian model 3
About this unit 3
After-sales service for Pioneer products 3
In case of trouble 4
Visit our website 4
Demo mode 4
Resetting the microprocessor 4
About this manual 4
GOperating this unit
Head unit 5
Remote control 5
Display indication 6
Basic Operations 6
Use and care of the remote control 7
Menu operations identical for function
settings/audio adjustmentS/initial settings!
lists 8
Tuner 8
-Basic Operations 8
~ Storing and recalling stations 8
-Function settings 8
CD/CD·R/CD·RW and USB storage
devices 9
- Basic Operations 9
~ Displaying text Information 9
-Selecting and playing fileS/tracks from
the name list 10
-Advanced operations using special
buttons 10
-Function settings 10
,Pod 11
-Basic Operations 11
-Displaying text information 11
-Browsing for asong 11
-Advanced operations using special
buttons
12
CD En
-Function settings 12
Audio Adjustments 13
Initial Settings 14
Other Functions 15
-Using the AUX source 15
-Turning the clock display on or off 15
• Additional Information
Troubleshooting 16
Error messages 16
Handling guideline 18
Compressed audio compatibility (disc.
USB)
19
iPod compatibility 20
Sequence of audio files 20
Copyright and trademark 21
Specifications 22

Section
(~B_e_f_o_re_Yo_u_S_ta_rt ) GI
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer-
ence, and
(2) this device must accept any inter-
ference received, including Interference that
may cause undesired operation.
Information to User
Alteration or modifications carried out without
appropriate authorIZation may invalidate the
user's right to operate the equipment.
For Canadian model
This Class 8digital apparatus complies with
Canadian ICES-003
About this unit
The tuner frequencies on this unit are allo-
cated for use In North America. Use in other
areas may result in poor reception.
6WARNING
Handling the cord on this product or cords asso-
ciated with accessories sold with the product will
expose you to chemicals listed on proposition
65
known to the State of California and other govern-
mental entities to cause cancer and birth defect
orother reproductive harm.
Wash hands after
handling.
CAUTION:
USE OF CONTROL OR ADJUSTMENTOR
PERFORMANCE
OF PROCEDURES
OTHER
THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE_
CAUTION:
THE USE
OF OPTICAL INSTRUMENTS
WITH THIS PRODUCT
WILL INCREASE
EYE HAZARD.
6CAUT'ON
• Do not allow this unit to come into contact
wilh liquids. Electrical shock could result.
Also, damage to this unit. smoke, and
over-
heating could result from contact with liquids.
•Always keep the volume low enough to hear
outside sounds.
•Avoid exposure
10 moisture,
•
If the battery is disconnected or discharged.
any preset memory will
be erased.
'-' Important (Serial number)
The serial number is located on the bottom of
this unit. For your own security and convenience.
be sure to record this number on the enclosed
warranty card. 0
After-sales service for
Pioneer products
Please contact the dealer or distributor from
where you purchased this unit for after-sales
service
(including warranty conditions) or any
other information. In case the necessary infor·
mation is not available. please contact the
companies listed below:
Please
do not ship your unit to the companies
at the addresses Iisfed below for repair wlfhouf
advance contact.
m
::l
'"
III
::l"
En (I)

Section
_ ( Before You Start
U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
PO. Box 1760
Long Beach. CA 90801·1760
800·421·1404
CANADA
Pioneer Electronics of Canada. Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Alislate Parkway
Markham. Ontano
L3R OP2
1·877-283·5901
905·479·4411
For warranty information please see the Lim-
ited Warranty sheet Included with
this unit. [!)
In case of trouble
Should this unrt fail to operate properly. please
contact your dealer
or nearest authorized
PIONEER Service Station 0
Visit our website
http://www.pioneerelectronics.com
•Learn about product updates (such as firm-
ware updates) for your product.
•Register your product to receive notices
about product updates and to safeguard
purchase details
In our files in the event of
loss or theft.
•Access owner's manuals. spare paris infor·
matlon. service Information.
and much
more.0
Demo mode
'-'Important
Failure to connect the red lead (ACC) of this unit
to aterminal coupled With Ignition switch on/oft
operations may lead to battery drain,
oEn
)
Demo mode
The demo automatically starts when the igni·
tlon switch
IS set to ACC or ON while the unit
IS turned off. Turning off the unit does not can-
cel
demo mode. To cancel the demo mode.
press
~/DISP/SCRL Press ~/DISP/SCRL
again to start. Operatmg the demo while the
ignition switch IS set to ACC may drain battery
power,(!J
Resetting the microprocessor
The microprocessor must be reset under the
following conditions:
•Prior to using
this unit for the first time
after installation
•
If the unrt falis to operate properly
•When strange
or incorrect messages ap-
pear on the display
o~
RESET button
1Remove the front panel.
2Press RESET with apen tip or other
pointed instrument.0
About this manual
• In the following insfructions. USB memo
aries and USB audio players are collectIvely
referred to as ··USB storage device."
•
In this manual. iPod and iPhone will be reo
ferred to as iPod.0

Section
(_O--'p'---e_r_a_ti_n-""g'---t_h_i5_u_n_i_t ~) C!EI
Head unit
Part Part
X
SRC/OFF
@
6/PAUSE
1; S.Rtrv
([t
1106
(j; 0.. (list)
~
3/~
(j;
MUlTI-CONTROL
:l1
21l<X
IM.C)
®Disc loading slot
jJ)
1/iPod
1)
~(eject) @
~/DISP/SCRL
X
USB port
@
CLK
1)
AUX input jack (3.5
:w
BAND/ESC
mm stereo jack)
~~'
Detach button
6, CAUTION
Use an optional Pioneer USB cable ICD-U50E) to
connect the USB audio player/USB memory to
the USB port. Since the USB audiO player/USB
memory is projected forward from the unit, it is
dangerous to connect directly.
00 not use the unauthorized product.@
Remote control
Part Operation
Th
VOLUME
Press to increase or decrease vo-
lume.
~g MUTE
Press to mute. Press again to un·
mute.
Press to perform manual
seek
'19
1i./~/-4/'"
tuning. fast forward. reverse and
track search controls. Also used
for controlling functions
~.
AUDIO Press to select an audio function
Press to select different displays
~
DISP/SCRL Press and hold to scroll through
the text information.
@
II Press to pause or resume.
Press to select functions.
8
FUNCTION
Press and hold to recalilhe initial
setting menu when the sources
are
oft.
Press to display the list depending
~
lIST/ on the source.
ENTER While in the operating menu.
press to control functions.
[!J
En CTI

e iPod
WIll
•(sound reo
tnever)
section
lID ( Operating this unit
Display indication
Indicator State
•X(shuf.
fie)
Shuffle or shuffle all function is
on while the IPod source IS being
selected
The sound retriever function IS
on.
CTRl (control model is set to
iPod.
)
Main dis- Tuner: band and frequency
Built-in CD .USB and
IPod
Basic Operations
•play sec- elapsed playback time and text
In·
tion formation o
Important
The disc (track) artist name is dis·
played. •
Handle gently when removing or attaching
•
IJJ (artist) Artist search refinement
on the
the front panel.
iPod browsing function IS In use •
Avoid subjecting the front panel to excessive
The disc (album) name IS diS·
shock
played •
Keep the front panel out of direct sunlight and
•
~(disc)
Album search refinement on the
high temperatures.
IPod browsing function IS in use •
Remove any cables and devices attached to
The track (song) name is dis·
this unit before detaching the front panel to
played.
avoid damage to the device or vehicle interior.
0
~ (song) Aplayable audio file has been se·
lected while operating the list. Removing the front panel to protect your unit from
Song search refinement on the theft
IPod browsing function
is in use.
:.1.. Press the detach button to release the front
•
~
An upper tier of folder or menu panel.
exists TGrab the front panel and remove.
•
'3 (list) The list function IS operated.
'I
Always keep the detached front panel In the pro-
tection deVice such
as protection case
Alower tier of folder or menu
ex·
Re·atlachlng the front panel
IsIs
•~It flashes when asong/album
reo
TSlide the front panel to the [eft until It clicks.
lated
to the song currently playing Front panel and the head unit are connected
on
is selected from IPod. the left
Side. Make sure that the front panel has
been properly connected
to the head unit
0
lDC The local seek tunmg IS on.
0
CD (stereo)
The selected frequency IS bemg
broadcasted mstereo.
li~ Folder repeat IS on
•(folder
reo
When repeat function IS on, only
peal)
~ is displayed
GI~~ Folder random is on.
4D
(folder ran· When random function IS on. only
,-
Press the right Side of the front panel until It is
darn)
XX IS displayed flrm!y seated
If yOU can't attach the front panel 10 the head unit
successfully. try again. However. forcing the front
panel Into place may result
In damage.
CD
En

Section
(~O---=--p_er_a_t_in--=g=---th_i_s_u_n_i_t ) CD
Turning the unit on
OJ Press SRC/OFF to turn the unit on.
Turning the unit off
rr:; Press SRC!OFF and hold until the unit turns oft
Selecting asource
OJ Press SRc/OFF to cycle between:
TUNER (tuner)-CD (built·in CD playerl-USB
(USBI/USB·iPod (iPodl-AUX (AUX)
Adjusting the volume
0::; Turn M.e. to adjust volume.
• Note
When this unit's blue/white lead is connected to
the vehicle's auto-antenna relay control terminal.
the vehicle's antenna extends when this unit's
source is turned on.
To retract the antenna, turn
the source
off.@
Use and care of the remote
control
Using the remote control
rn Point the remote control in the direction of the
front panel to operate.
When uSing for the first time. pull out the film
protruding from the tray.
Replacing the battery
[[ Slide the tray out on the back of the remote can·
Irol.
II Insert the battery with the plus (+) and minus (-)
poles aligned properly.
AWARNING
•Keep the battery out of the reach of children.
Should the battery
be swallowed, consult a
doctor immediately.
•Batteries (battery pack or batteries installed)
must not
be exposed to excessIve heat such
as sunshine, fire or the like.
ACAUTION
•Use one CR2025 (3 V) lithium battery.
•
Remove the battery if the remote control is not
used for amonth or longer.
•There
is adanger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent
type.
• Do not handle the battery with metallic tools
•
Do not store the battery with metallic objects.
•
If the battery leaks, wipe the remote control
completely clean and install anew battery.
•When disposing of used batteries. comply
with governmental regulations orenvironmen·
tal public institutions' rules that apply
in your
country/area.
•"Perchlorate
Material- special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate. (Applicable to California, U.S.A)"
Qlmportant
•Do not store the remote control in high tem-
peratures or direct sunlight.
•
The remote control may not function properly
in direct sunlight.
•
Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.@
-m
::l
'"
iii'
:::r
En GJ

Section
lID ( Operating this unit
Menu operations identical
for function settings/audio
adjustments/initial
settings/lists
Returning to the prevIous display
Returning to the prevIous lisVcategory (the folder/ca-
tegory one level higher)
.i Press =:l/OISP/SCRl
Returnmg to the main menu
Returnmg to the top
lier of lisVcategory
IPress and hold =:l/DISP/SCRL
Returning to the ordmary display
Canceling the initial setting menu
Returnmg to the ordinarydisplay from the IisVcate-
gory
:..!.. Press BAND/ESe.
Tuner
Basic Operations
Seleclmg aband
1Press BAND/ESC until the desired band (FM1.
FM2. FM3 for
FM or AM) IS displayed
Manual tunmg (step
by step)
J._ Push M.e. left or right.
Seeking
fPush and hold M.e. left
or nght and then re-
lease
You can cancel seek tunmg by pushing M.e. left
or nght.
While pushmg and holding M.e. lell
or right. you
can skip staliOns.
Seek luning starts as soon as
you release M.e.
Storing and recalling stations
You can easily store up to six stations for each
band as presets.
CD En
)
Using preset tuning buttons
1When you find astation that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
2Press
one of the preset tuning buttons
(1 to 6) to select the desired station.
Using preset screen
1Press a.. to switch to the preset screen.
2Use M.e.
to store the selected fre-
quency
in memory.
Turn to change the preset number. Press and
hold to store.
3Use M.e. to select the desired station.
Turn to change the station. Press to select.
aNote
You can also recall stored radio stations by push-
ing M.e. up or down dunng the frequency dis-
play.
Function settings
1Press M.e. to display the main menu.
2Turn M.e.
to change the menu option
and press to select FUNCTION.
3Turn M.e. to select the function.
After selecting. perform the following proce·
dures fa
set the tunction
8SM (best stations memory)
8SM (best stations memory) automatically stores the
six strongest stations
In the order of their signal
strength
'...1. Press M.e. to turn 85M on.
To cancel. press M.e. again.

Section
(~o_p_e_ra_t_i_n_g_t_h_is_u_n_it ~) •
Local seek tuning lets you tune in only those radio sta-
tions
'vvith sufficiently strong signals for good recep·
bon.
if Press M.e. to display the setting mode.
iT Turn M.e. to select the desired setting.
FM: OFF-LeveI1-LeveI2-LeveI3-LeveI4
AM: OFF-LeveI1-LeveI2
Larger setting number IS higher level. The highest
level setting allows reception of only the strongest
stations, while lower settings let you receive pro-
gressively weaker stations.
II Press M.e. to confirm the selection.
• Note
Operation is complete even if the menu is can-
celled before being confirmed
~
CD/CD-R1CD-RW and USB
storage devices
Basic Operations
Playing aCO/CO-R/CO-RW
If
Insert the disc, label side up, into the disc loading
slot
11
If adisc has already been inserted. press SRC/
OFF to select the built-in CO player
Ejecting aCO/CO-R/CO-RW
IT:
Press ~ (eject).
Playing songs on aUSB storage device
[I Open the USB connector cover.
[[
Plug in the USB sorage device using aUSB
cable
Stop playing aUSB storage device
IT: You may disconnect the USB storage device at
anytime.
Selecting afolder
1Push
M.e. up or down.
Selecting atrack
IT
Push M.e. left or right.
Fast forwarding or reversing
[[
Push and hold M.e. left or right.
Returning to root folder
j1Press and hold BAND/ESC
S'vvitching betvv'een compressed Judio and CD DA
,1 Press BAND/ESC.
•Notes
•When playing compressed audio. there is no
sound during fast forward or reverse,
•USB portable audio players that can
be
charged via USB will be recharged when
plugged in and the ignition switch
is set to
ACC or ON.
•Disconnect USB storage device from
unit
when not in use.
•
If plug and play is on and aUSB storage de-
vice is present. dependi g
on the type of de-
vice, the source may switch to
USB
automatically when you turn on the engine,
Please change plug and play setting as neces-
sary. Refer to
USB PnP (plug and play) on page
15,
Displaying text information
Selecting the desired text information
~.L Press ::>/DISP/SCRL
CD TEXT discs: Track number and play time-
disc title-disc artist name-track title-track ar-
tist name
WMA/MP3/AAC: Play time-folder name-file
name-track title-artist name-album title-
genre-comment-bit rate-toldel- and track
numbers
WAV: Play time-folder name-file name-track
title-artist name-album title-genre-com-
ment-sampling frequency-folder and track
numbers
Scrolling the text information to the left
LI PI-ess and hold =:J/DISP/SCRL.
•Notes
•Incompatible text stored with the audio file
may not
be displayed or may be displayed in-
correctly.
•Depending on the version of iTunes used to
write MP3/AAC files onto adisc,
comment in-
formation may
be Incorrectly displayed,
En m

section
liD ( Operating this unit
•When playing back VBR (variable bit rate)-re-
corded WMA files, the average bit rate value is
displayed.
•When playing back VBR (variable bit rate)-re-
corded MP3 files, VBR is displayed instead of
bit rate value.
•When playing back VBR (variable bit rate)-re-
corded MC files, the average bit rate value is
displayed. However. depending on the soft-
ware used to decode MC files, VBR may be
displayed.
Selecting and playing filesl
tracks from the name list
1 Press 0.. to switch to the file/track
name list mode.
2
Use M.e. to select the desired file name
(or folder name).
Changing file or folder name
IT:' Turn M.e.
Playing
iT' When a fi Ie or track is selected. press M.e.
Seeing alist of files (or folders) in the selected folder
~ When afolder is selected, press M.e.
Playing asong in the selected folder
n' When afolder is selected, press and hold M.e.
gNote
Track title list will display the list of track titles on
a CD TEXT disc.
ill) En
)
Advanced operations using
special buttons
Selecting arepeat play range
rj!
Press 3/¢ to cycle between the following:
L __ 'CD/CD-RlCD-RW
•Disc -Repeat all tracks
•Track -Repeat the current track
•Folder -Repeat the current folder
USB storage device
•
AII- Repeat all files
•Track -Repeat the current file
•Folder-Repeat the current folder
Playing tracks in random order
IT::
Press 2/~ to turn random play on or off.
Tracks
in aselected repeat range are played in
random order.
Pausing playback
[[
Press 6/PAUSE to pause or resume.
Enhancing compressed audio and restoring rich
sound (sound retriever)
[[
Press S.Rtrv to cycle between:
OFF (off)-1-2
1is effective for low compression rates. and 2 is
effective for high compression rates.
Function settings
1 Press M.e. to display the main menu.
2
Turn M.e. to change the menu option
and
press to select FUNCTION.
3 Turn M.e. to select the function.
After selecting, perform the following proce-
dures to set the function.
L~ Press M.e. to display the setting mode.
iT Turn M.e. to select arepeat play range.
For details. refer to Selecting arepeat play range on
this page.
i3Press M.e. to confirm the selection.
.l Press M.e. to turn random play on oroff.