Pioneer DEH-4700MP User manual

Operation Manual
High power CD/MP3/WMA player with RDS tuner
DEH-4700MP
DEH-4700MPB
English DeutschEspañol

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, keep this man-
ual in a safe place for future reference.
Before You Start
About this unit 4
Features 4
About WMA 4
Protecting your unit from theft 5
Removing the front panel 5
Attaching the front panel 5
Whats What
Head unit 6
Optional remote control 6
Power ON/OFF
urning the unit on and selecting a
source 8
urning the unit off 8
Tuner
Listening to the radio 9
Storing and recalling broadcast
frequencies 9
uning in strong signals 10
Storing the strongest broadcast
frequencies 10
RDS
Introduction of RDS operation 11
Switching the RDS display 11
Receiving P Y alarm broadcasts 11
Selecting alternative frequencies 11
Using PI Seek 12
Using Auto PI Seek for preset
stations 12
Limiting stations to regional
programming 12
Receiving traffic announcements 12
P Y list 1
Built-in CD Player
Playing a CD 14
Repeating play 14
Playing tracks in a random order 14
Scanning tracks of a CD 14
Pausing CD playback 15
Selecting the search method 15
Searching every 10 tracks in the current
disc 15
Using compression and BMX 15
Using CD EX functions 16
MP /WMA/WAV Player
Playing MP3/WMA/WAV 17
Repeating play 18
Playing tracks in a random order 18
Scanning folders and tracks 18
Pausing MP3/WMA/WAV playback 19
Selecting the search method 19
Searching every 10 tracks in the current
folder 19
Using compression and BMX 19
Displaying text information on MP3/WMA
disc 19
Displaying text information on WAV disc 20
Audio Adjustments
Introduction of audio adjustments 21
Using balance adjustment 21
Using the equalizer 21
Recalling equalizer curves 21
Adjusting equalizer curves 22
Fine-adjusting equalizer curve 22
Adjusting loudness 22
Front image enhancer (F.I.E.) 2
Adjusting source levels 2
Initial Settings
Adjusting initial settings 24
Contents
En
2

Setting the FM tuning step 24
Switching Auto PI Seek 24
Saving the battery consumption 24
Additional Information
Understanding built-in CD player error
messages 25
Sound muting 25
CD player and care 25
CD-R/CD-RW discs 26
MP3, WMA and WAV files 26
MP3 additional information 27
WMA additional information 27
WAV additional information 27
About folders and MP3/WMA/WAV files 28
erms 29
Specifications 1
En
English
Contents

About this unit
he tuner frequencies on this unit are allo-
cated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other
areas may result in poor reception. he RDS
(radio data system) function operates only in
areas with FM stations broadcasting RDS sig-
nals.
CAUTION
!Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat
could result from contact with liquids.
!ACLASS 1 LASER PRODUCT label is affixed
to the bottom of this unit.
CLASS 1
LASER PRODUCT
!he Pioneer CarStereo-Pass is for use only in
Germany.
!Keep this manual handy as a reference for op-
erating procedures and precautions.
!Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
!Protect this unit from moisture.
!If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
!Should this product fail to operate properly,
contact your dealer or nearest authorized Pio-
neer Service Station.
Features
CD playback
Music CD/CD-R/CD-RW playback is possible.
MP3 file playback
You can play back MP3 files recorded on CD-
ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
!Supply of this product only conveys a li-
cense for private, non-commercial use and
does not convey a license nor imply any
right to use this product in any commercial
(i.e. revenue-generating) real time broad-
casting (terrestrial, satellite, cable and/or
any other media), broadcasting/streaming
via internet, intranets and/or other net-
works or in other electronic content distri-
bution systems, such as pay-audio or
audio-on-demand applications. An inde-
pendent license for such use is required.
For details, please visit
http://www.mp3licensing.com.
WMA file playback
You can play back WMA files recorded on CD-
ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
WAV file playback
You can play back WAV files recorded on CD-
ROM/CD-R/CD-RW (Linear PCM (LPCM)/MS
ADPCM recordings).
About WMA
he Windows Media"logo printed on the box
indicates that this unit can play back WMA
data.
Before You Start
En
4
Section
01

WMA is short for Windows Media Audio and
refers to an audio compression technology
that is developed by Microsoft Corporation.
WMA data can be encoded by using Windows
Media Player version 7 or later.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
Notes
!With some applications used to encode WMA
files, this unit may not operate correctly.
!With some applications used to encode WMA
files, album names and other text information
may not be correctly displayed.
Protecting your unit from
theft
he front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
Important
!Never use force or grip the display and the
buttons too tightly when removing or attach-
ing.
!Avoid subjecting the front panel to excessive
shocks.
!Keep the front panel out of direct sunlight and
high temperatures.
emoving the front panel
1 Press DETACH to release the front
panel.
Press DETACH and the right side of the panel
is released from the head unit.
2 Grab the front panel and remove.
Grab the right side of the front panel and pull
away to the left. he front panel will be de-
tached from the head unit.
Put the front panel into the protective
case provided for safe keeping.
Attaching the front panel
1 Place the front panel flat against the
head unit.
2 Press the front panel into the face of
the head unit until it is firmly seated.
Before You Start
En 5
English
Section
01

Head unit
1TA button
Press to turn A function on or off. Press
and hold to turn AF function on or off.
2Disc loading slot
Insert a disc to play.
3EJECT button
Press to eject a CD from your built-in CD
player.
4AUDIO button
Press to select various sound quality con-
trols.
5DISPLAY button
Press to select different displays.
6a/b/c/dbuttons
Press to do manual seek tuning, fast for-
ward, reverse and track search controls.
Also used for controlling functions.
7LOUDNESS button
Press to turn loudness on or off.
8DETACH button
Press to remove the front panel from the
head unit.
9BAND button
Press to select among two FM and MW/LW
bands and cancel the control mode of func-
tions.
aLOCAL/BSM button
Press to turn local function on or off.
Press and hold to turn BSM function on or
off.
b16 buttons
Press for preset tuning.
cSOURCE button
his unit is turned on by selecting a source.
Press to cycle through all the available
sources.
dVOLUME
Rotate it to increase or decrease the vo-
lume.
eEQ button
Press to select various equalizer curves.
Optional remote control
The steering remote control CD-R300 is sold se-
parately.
1
1
1
3
8
8
8
9
9
9
a
a
a
b
b
b
c
c
c
4
6
6
2
5
5
5
7
7
7
d
d
d
e
e
e
Whats What
En
6
Section
02

Operation is the same as when using the but-
tons on the head unit. See the explanation of
the head unit about the operation of each but-
ton with the exception of ATT, which is ex-
plained below.
fVOLUME button
Press to increase or decrease the volume.
gATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
hTUNER button
Press to select the tuner as the source.
iPAUSE button
Press to turn pause on or off.
jCD button
Press to select the built-in CD player as the
source.
kFUNCTION button
Not used.
g
6
4
j
k
f
i
h
9
Whats What
En 7
English
Section
02

Turning the unit on and
selecting a source
You can select a source you want to listen to.
o switch to the built-in CD player, load a disc
in the unit (refer to page 14).
%When using the head unit, press
SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Built-in CD playerTuner
When you select a source the unit is turned
on.
%When using the remote control, press
TUNER or CD to select a source.
Press each button repeatedly to switch be-
tween the following sources:
TUNER:TunerSources off
CD:Built-in CD playerSources off
Notes
!When no disc has been set in the unit, the
source will not switch to the built-in CD player.
!When this units blue/white lead is connected
to the vehicles auto-antenna relay control
terminal, the vehicles antenna extends when
this units source is turned on. o retract the
antenna, turn the source off.
Turning the unit off
%Press SOURCE and hold until the unit
turns off.
Power ON/OFF
En
8
Section
0

Listening to the radio
1 2 4 53
his units AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 11).
1Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
2Frequency indicator
Shows to which frequency the tuner is
tuned.
3LOC indicator
Shows when local seek tuning is on.
4Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
5Preset number indicator
Shows which preset has been selected.
1 Press SOURCE to select the tuner.
2 Use VOLUME to adjust the sound level.
Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1,F2 for FM or MW/LW.
4 To perform manual tuning, briefly press
cor d.
5 To perform seek tuning, press and hold
cor dfor about one second and release.
he tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by briefly pressing
either cor d.
#If you press and hold cor dyou can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Storing and recalling
broadcast frequencies
If you press any of the preset tuning buttons
16you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
%When you find a frequency that you
want to store in memory press one of pre-
set tuning buttons 16 and hold until the
preset number stops flashing.
he number you have pressed will flash in the
preset number indicator and then remain lit.
he selected radio station frequency has been
stored in memory.
he next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
Notes
!Up to 12 FM stations, 6 for each of the two FM
bands, and 6 MW/LW stations can be stored
in memory.
!You can also use aand bto recall radio sta-
tion frequencies assigned to preset tuning
buttons 16.
Tuner
En 9
English
Section
04

Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
%Press LOCAL/BSM repeatedly to turn
local seek tuning on or off.
When local seek tuning is on, LOC appears in
the display.
Storing the strongest
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 16and
once stored there you can tune in to those fre-
quencies with the touch of a button.
!Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons 16.
%Press LOCAL/BSM and hold until the
BSM turns on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning buttons 16in the
order of their signal strength. When finished,
BSM stops flashing.
#o cancel the storage process, press
LOCAL/BSM.
Tuner
En
10
Section
04

Introduction of DS operation
1 2 43
RDS (radio data system) is a system for provid-
ing information along with FM broadcasts.
his inaudible information provides such fea-
tures as program service name, program type,
traffic announcement standby and automatic
tuning, intended to aid radio listeners in find-
ing and is tuning in to a desired station.
1Program service name
Shows the name of broadcast program.
2AF indicator
Shows when AF (alternative frequencies
search) function is on.
3TA indicator
Shows when A (traffic announcement
standby) function is on.
4TP indicator
Shows when a P station is tuned in.
Notes
!RDS service may not be provided by all sta-
tions.
!RDS functions such as AF and A are only ac-
tive when your radio is tuned to an RDS
station.
Switching the DS display
When you tune in an RDS station its program
service name is displayed. If you want to know
the frequency you can.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Program service nameP Y information
Frequency
P Y (program type ID code) information is
listed on page 13.
#P Y information and the frequency of the cur-
rent station appears on the display for eight sec-
onds.
eceiving PTY alarm
broadcasts
P Y alarm is a special P Y code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, ALARM appears on the display
and the volume adjusts to the A volume.
When the station stops broadcasting the
emergency announcement, the system re-
turns to the previous source.
!An emergency announcement can be can-
celled by pressing TA.
!You can also cancel an emergency an-
nouncement by pressing SOURCE,BAND,
a,b,cor d.
Selecting alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, the unit will automatically search for a
different station in the same network which is
broadcasting a stronger signal.
!AF is on as a default.
%Press TA and hold repeatedly to turn AF
on or off.
When AF is on, AF appears in the display.
DS
En 11
English
Section
05

Notes
!Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
!When you recall a preset station, the tuner
may update the preset station with a new fre-
quency from the stations AF list. ( his is only
available when using presets on the F1 band.)
No preset number appears on the display if
the RDS data for the station received differs
from that for the originally stored station.
!Sound may be temporarily interrupted by an-
other program during an AF frequency
search.
!When the tuner is tuned to a non-RDS station
the AF indicator flashes.
!AF can be turned on or off independently for
each FM band.
Using PI Seek
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station
with the same programming. During the
search, PI SEEK is displayed and the output is
muted. he muting is discontinued after com-
pletion of the PI Seek, whether or not a differ-
ent station is found.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
!he default setting for Auto PI Seek is off.
See S itching Auto PI Seek on page 24.
Limiting stations to regional
programming
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programs.
%Press BAND and hold until the regional
function turns on or off.
Notes
!Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
!he preset number may disappear on the dis-
play if the tuner tunes in a regional station
which differs from the originally set station.
!he regional function can be turned on or off
independently for each FM band.
eceiving traffic
announcements
A (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. A
can be activated for both a P station (a sta-
tion that broadcasts traffic information) or an
enhanced other networks P station (a station
carrying information which cross-references
P stations).
1 Tune in a TP or enhanced other net-
works TP station.
When you are tuned into a P or enhanced
other networks P station the TP indicator will
light.
DS
En
12
Section
05

2 Press TA to turn traffic announcement
standby on.
TA appears in the display. he tuner will stand-
by for traffic announcements.
#o turn traffic announcements standby off,
press TA again.
Use VOLUME to adjust the TA volume
when a traffic announcement begins.
he newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA while a traffic announcement
is being received to cancel the announce-
ment.
he tuner returns to the original source but re-
mains in the standby mode until TA is pressed
again.
#You can also cancel the announcement by
pressing SOURCE,BAND,a,b,cor dwhile a
traffic announcement is being received.
Notes
!he system switches back to the original
source following traffic announcement recep-
tion.
!Only P and enhanced other networks P sta-
tions are tuned in during seek tuning or BSM
when A is on.
PTY list
Specific Type of program
NEWS News
AFFAIRS Current affairs
INFO General information and advice
SPORT Sports
WEATHER Weather reports/meteorological infor-
mation
FINANCE Stock market reports, commerce,
trading, etc.
POP MUS Popular music
ROCK MUS Contemporary modern music
Specific Type of program
EASY MUS Easy listening music
OTH MUS Non-categorized music
JAZZ Jazz
COUNTRY Country music
NAT MUS National music
OLDIES Oldies music, golden oldies
FOLK MUS Folk music
L.CLASS Light classical music
CLASSIC Serious classical music
EDUCATE Educational programs
DRAMA All radio plays and serials
CULTURE National or regional culture
SCIENCE Nature, science and technology
VARIED Light entertainment
CHILDREN Childrens
SOCIAL Social affairs
RELIGION Religious affairs or services
PHONE IN Phone In
TOURING ravel programs, not for announce-
ments about traffic problems
LEISURE Hobbies and recreational activities
DOCUMENT Documentaries
DS
En 1
English
Section
05

Playing a CD
21
1Play time indicator
Shows the elapsed playing time of the cur-
rent track.
2Track number indicator
Shows the track currently playing.
1 Insert a CD into the CD loading slot.
Playback will automatically start.
#Be sure to turn up the label side of a disc.
#After a CD has been inserted, press SOURCE
to select the built-in CD player.
#You can eject a CD by pressing EJECT.
2 Use VOLUME to adjust the sound level.
To perform fast forward or reverse,
press and hold cor d.
#If you select ROUGH, pressing and holding c
or denables you to search every 10 tracks in the
current disc. (Refer to Selecting the search meth-
od on the next page.)
4 To skip back or forward to another
track, press cor d.
Pressing dskips to the start of the next track.
Pressing conce skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!he built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
!Do not insert anything other than a CD into
the CD loading slot.
!If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 25.
epeating play
Repeat play lets you hear the same track over
again.
%Press 5 repeatedly to turn repeat play
on or off.
When repeat play is on, RPT appears in the
display.
#If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
%Press 4 repeatedly to turn random play
on or off.
When random play is on, RDM appears in the
display.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press to turn scan play on.
SCAN appears in the display. he first 10 sec-
onds of each track is played.
Built-in CD Player
En
14
Section
06

2 When you find the desired track press
to turn scan play off.
#After scanning of a CD is finished, normal
playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
%Press 6 repeatedly to turn pause on or
off.
When pause is on, PAUSE appears in the dis-
play.
#You can also turn pause on or off by pressing
PAUSE.
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
%Press 2 to select the search method.
Press 2until the desired search method ap-
pears in the display.
!FF/REV Fast forward and reverse
!ROUGH Searching every 10 tracks
Searching every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
a lot of tracks, you can roughly search for the
track you want to play.
1 Select the search method ROUGH.
Refer to Selecting the search method on this
page.
2 Press and hold cor dto search every
10 tracks on a disc.
#If a disc contains less than 10 tracks, pressing
and holding drecalls the last track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding drecalls the last track of the
disc.
#If a disc contains less than 10 tracks, pressing
and holding crecalls the first track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding crecalls the first track of the
disc.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions
have a two-step adjustment. he COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
%Press 1 to select your favorite setting.
Press 1repeatedly to switch between the fol-
lowing settings:
COMP OFFCOMP 1COMP 2
COMP OFFBMX 1BMX 2
Built-in CD Player
En 15
English
Section
06

Using CD TEXT functions
Some discs have certain information encoded
on the disc during manufacture. hese discs
may contain such information as the CD title,
track title, artists name and playback time
and are called CD EX discs. Only these spe-
cially encoded CD EX discs support the
functions listed below.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play timeDISC TTL (disc title)ART NAME
(disc artist name)TRK TTL (track title)
ART NAME (track artist name)
#If specific information has not been recorded
on a CD EX disc, NO XXXX will be displayed
(e.g., NO T-TTL).
Note
You can scroll to the left the title by pressing and
holding DISPLAY.
Built-in CD Player
En
16
Section
06

Playing MP3/WMA/WAV
5412 3
1Folder number indicator
Shows the number of folder currently play-
ing.
2MP indicator
Shows when the MP3 file is playing.
3WMA indicator
Shows when the WMA file is playing.
4Play time indicator
Shows the elapsed playing time of the cur-
rent track (file).
5Track number indicator
Shows the track (file) currently playing.
!If a track number 100 to 199 is selected,
don the left of the track number indica-
tor will light.
!If a track number 200 or more is selected,
don the left of the track number indica-
tor will blink.
1 Insert a CD-ROM into the CD loading
slot.
Playback will automatically start.
#Be sure to turn up the label side of a disc.
#After a CD-ROM has been inserted, press
SOURCE to select the built-in CD player.
#You can eject a CD-ROM by pressing EJECT.
2 Use VOLUME to adjust the sound level.
Press aor bto select a folder.
#You cannot select a folder that does not have
an MP3/WMA/WAV file recorded in it.
#o return to folder 01 (ROO ), press and hold
BAND. However, if folder 01 (ROO ) contains no
files, playback commences with folder 02.
4 To perform fast forward or reverse,
press and hold cor d.
#his is fast forward and reverse operation only
for the file being played. his operation is can-
celed when the previous or next file is reached.
#If you select ROUGH, pressing and holding c
or denables you to search every 10 tracks in the
current folder. (Refer to Selecting the search meth-
od on page 19.)
5 To skip back or forward to another
track, press cor d.
Pressing dskips to the start of the next track.
Pressing conce skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!When playing discs with MP3/WMA/WAV files
and audio data (CD-DA) such as CD-EX RA
and MIXED-MODE CDs, both types can be
played only by switching mode between MP3/
WMA/WAV and CD-DA with BAND.
!If you have switched between playback of
MP3/WMA/WAV files and audio data (CD-DA),
playback starts at the first track on the disc.
!he built-in CD player can play back an MP3/
WMA/WAV file recorded on CD-ROM. (Refer
to page 26 for files that can be played back.)
!Do not insert anything other than a CD into
the CD loading slot.
!here is sometimes a delay between starting
up CD playback and the sound being issued.
When being read in, FRMTREAD is displayed.
!Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROO ) contains no files, playback
commences with folder 02.)
MP3/WMA/WAV Player
En 17
English
Section
07

!When playing back files recorded as VBR
(variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
!If the inserted disc contains no files that can
be played back, NO AUDIO is displayed.
!If the inserted disc contains WMA files that
are protected by digital rights management
(DRM) , SKIPPED is displayed while the pro-
tected file is skipped.
!If all the files on the inserted disc are secured
by DRM, PROTECT is displayed.
!here is no sound on fast forward or reverse.
!If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 25.
epeating play
For MP3/WMA/WAV playback, there are three
repeat play ranges: FRPT (folder repeat), RPT
(one-track repeat) and disc repeat.
%Press 5 to select the repeat range.
Press 5until the desired repeat range appears
in the display.
!RPT Repeat just the current track
!FRPT Repeat the current folder
!Play time (e.g., 012 )Repeat all tracks
Notes
!If you select another folder during repeat play,
the repeat play range changes to disc repeat.
!If you perform track search or fast forward/re-
verse during RPT, the repeat play range
changes to FRPT.
!When FRPT is selected, it is not possible to
play back a subfolder of that folder.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range, FRPT
(folder repeat) and disc repeat.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press 4 repeatedly to turn random play
on or off.
When random play is on, RDM appears in the
display.
#If you turn random play on during FRPT,
FRDM appears in the display.
Scanning folders and tracks
While you are using FRPT (folder repeat), the
beginning of each track in the selected folder
plays for about 10 seconds. When you are
using disc repeat, the beginning of the first
track of each folder is played for about 10 sec-
onds.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press to turn scan play on.
SCAN appears in the display. he first 10 sec-
onds of each track of the current folder (or the
first track of each folder) is played.
#If you turn scan play on during FRPT,FSCN
appears in the display.
When you find the desired track (or
folder) press to turn scan play off.
#After track or folder scanning is finished, nor-
mal playback of the tracks will begin again.
MP3/WMA/WAV Player
En
18
Section
07

Pausing MP3/WMA/WAV
playback
Pause lets you temporarily stop playback of
the MP3/WMA/WAV.
%Press 6 repeatedly to turn pause on or
off.
When pause is on, PAUSE appears in the dis-
play.
#You can also turn pause on or off by pressing
PAUSE.
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
%Press 2 to select the search method.
Press 2until the desired search method ap-
pears in the display.
!FF/REV Fast forward and reverse
!ROUGH Searching every 10 tracks
Searching every 10 tracks in
the current folder
If the current folder contains over 10 tracks,
you can search every 10 tracks. When one
folder contains a lot of tracks, you can roughly
search for the track you want to play.
1 Select the search method ROUGH.
Refer to Selecting the search method on this
page.
2 Press and hold cor dto search every
10 tracks in the current folder.
#If the current folder contains less than 10
tracks, pressing and holding drecalls the last
track of the folder. Also, if the remaining number
of tracks after searching every 10 tracks is less
than 10, pressing and holding drecalls the last
track of the folder.
#If the current folder contains less than 10
tracks, pressing and holding crecalls the first
track of the folder. Also, if the remaining number
of tracks after searching every 10 tracks is less
than 10, pressing and holding crecalls the first
track of the folder.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions
have a two-step adjustment. he COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
%Press 1 to select your favorite setting.
Press 1repeatedly to switch between the fol-
lowing settings:
COMP OFFCOMP 1COMP 2
COMP OFFBMX 1BMX 2
Displaying text information
on MP3/WMA disc
ext information recorded on a MP3/WMA
disc can be displayed.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
MP3/WMA/WAV Player
En 19
English
Section
07

Play timeFOLDER (folder name)FILE (file
name)TRK TTL (track title)ART NAME (ar-
tist name)ALBM TTL (album title)
COMMENT (comment)Bit rate
#When playing back MP3 files recorded as VBR
(variable bit rate) files, the bit rate value is not dis-
played even after switching to bit rate. (VBR will
be displayed.)
#When playing back WMA files recorded as
VBR (variable bit rate) files, the average bit rate
value is displayed.
#If specific information has not been recorded
on an MP3/WMA disc, NO XXXX will be dis-
played (e.g., NO NAME).
#With some applications used to encode WMA
files, album names and other text information
may not be correctly displayed.
Note
You can scroll to the left the text information by
pressing and holding DISPLAY.
Displaying text
information on WAV disc
You can display text information recorded on a
WAV disc.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play timeFOLDER (folder name)FILE (file
name)Sampling frequency
#You can only play back WAV files in the fre-
quencies 16, 22.05, 24, 32, 44.1 and 48 kHz
(LPCM), or 22.05 and 44.1 kHz (MS ADPCM). he
sampling frequency shown in the display may be
rounded.
Note
You can scroll to the left the text information by
pressing and holding DISPLAY.
MP3/WMA/WAV Player
En
20
Section
07