The LOCAL 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 1to 6.
Once stored you can tune in to those frequen-
cies with the touch of button.
!Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons 1to 6.
1 Press FUNCTION to select BSM.
2 Press ato turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
#To cancel the storage process, press b.
Built-in Player
Playing a disc
1 Insert a CD into the CD loading slot.
Playback will automatically start.
#Be sure to turn up the label side of a disc.
#After a CD has been inserted, press SOURCE
to select the built-in CD player.
#You can eject a CD by pressing EJECT.
2 To perform fast forward or reverse,
press and hold cor d.
3 To skip back or forward to another
track, press cor d.
Notes
!Read the precautions for discs and player on
page 14.
!If an error message such as ERROR-11 is dis-
played, refer to Error messages on page 14.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select RPT.
2 Press cor dto select the repeat range.
DSC –Repeat all tracks
TRK –Repeat the current track
#If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
#To return to the normal display, press BAND.
Playing tracks in random order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select RDM.
2 Press aor bto turn random play on or
off.
When random play is on, RDM appears in the
display.
#To return to the normal display, press BAND.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select SCAN.
2 Press ato turn scan play on.
SCAN appears in the display. The first 10 sec-
onds of each track is played.
3 When you find the desired track press
bto turn scan play off.
#If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
#After scanning of a CD is finished, normal
playback of the tracks will begin again.
Pausing disc playback
Pause lets you temporarily stop playback of
the disc.
Operating this unit
En 7
English
Section
02
