Pioneer DEH-P9600MP User manual

ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
DEH-P9600MP/XN/EW
CRT3192
MULTI-CD CONTROL DSP HIGH POWER CD/MP3/WMA PLAYERWITH RDSTUNER
DEH-P9600MP
/XN/EW
This service manual should be used together with the following manual(s):
Model No. Order No. Mech.Module Remarks
CX-3098 CRT3179 S10WMAcode2 CD Mech. Module:Circuit Description, Mech.Description, Disassembly
For details, refer to "Important symbols for good services".
K-ZZU.FEB. 2004 printed in Japan

DEH-P9600MP/XN/EW
2
1234
1234
C
D
F
A
B
E
SAFETY INFORMATION
-CD Section Precaution
1. Before disassembling the unit, be sure to turn off
the power. Unplugging and plugging the connectors
during power-on mode may damage the ICs inside
the unit.
2. To protect the pickup unit from electrostatic discharge
during servicing, take an appropriate treatment
(shorting-solder) by referring to "the DISASSEMBLY"
on page 64.
3. After replacing the pickup unit, be sure to check the
grating. (See p.60.)
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely
repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.
1. Safety Precautions for those who Service this Unit.
• When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable
results.
Caution:
1. During repair or tests, minimum distance of 13cm from the focus lens must be kept.
2. During repair or tests, do not view laser beam for 10 seconds or longer.
2. A “CLASS 1 LASER PRODUCT” label is affixed to the
bottom of the player.
3. The triangular label is attached to the mechanism
unit frame.
4. Specifications of Laser Diode
Specifications of laser radiation fields to which human access is possible during service.
Wavelength = 800 nanometers
CLASS 1
LASER PRODUCT

DEH-P9600MP/XN/EW 3
5678
5678
C
D
F
A
B
E
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replaced only with the same or equivalent type recommended by the manufacture.
Discord used batteries according to the manufacture's instructions.
[ Important symbols for good services ]
In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.
When you find the procedures bearing any of the symbols, be sure to fulfill them:
2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.
3. Cleaning
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
proper cleaning should be performed to restore their performances.
5. Lubricants, glues, and replacement parts
Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying
glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed
ones should be used.
4. Shipping mode and shipping screws
To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.

DEH-P9600MP/XN/EW
4
1234
1234
C
D
F
A
B
E
CONTENTS
SAFETY INFORMATION.....................................................................................................................................2
1. SPECIFICATIONS ............................................................................................................................................ 5
2. EXPLODED VIEWS AND PARTS LIST............................................................................................................8
2.1 PACKING ...................................................................................................................................................8
2.2 EXTERIOR(1) .......................................................................................................................................... 10
2.3 EXTERIOR(2) .......................................................................................................................................... 12
2.4 CD MECHANISM MODULE.....................................................................................................................14
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM..........................................................................................16
3.1 BLOCK DIAGRAM................................................................................................................................... 16
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)..............................................................................18
3.3 KEYBOARD UNIT(OEL)..........................................................................................................................24
3.4 KEYBOARD UNIT(LCD)..........................................................................................................................26
3.5 CD MECHANISM MODULE(GUIDE PAGE)............................................................................................28
4. PCB CONNECTION DIAGRAM .....................................................................................................................38
4.1 TUNER AMP UNIT...................................................................................................................................38
4.2 KEYBOARD UNIT(OEL)..........................................................................................................................42
4.3 KEYBOARD UNIT(LCD)..........................................................................................................................43
4.4 CD MECHANISM MODULE.....................................................................................................................44
4.5 SWITCH PCB ..........................................................................................................................................46
4.6 CONNECTOR PCB..................................................................................................................................47
5. ELECTRICAL PARTS LIST ............................................................................................................................48
6. ADJUSTMENT ............................................................................................................................................... 57
6.1 JIG CONNECTION DIAGRAM.................................................................................................................57
6.2 CD ADJUSTMENT...................................................................................................................................58
6.3 CHECKING THE GRATING AFTER CHANGINGTHE PICKUP UNIT....................................................60
6.4 ERROR MODE ........................................................................................................................................62
6.5 FREQUENCY CHECK FOR CLOCK.......................................................................................................63
6.6 OEL SCREENSAVER STUDIO IKA TO LKD APPLICATION : GGV1168................................................63
7. GENERAL INFORMATION............................................................................................................................. 64
7.1 DIAGNOSIS............................................................................................................................................. 64
7.1.1 DISASSEMBLY.....................................................................................................................................64
7.1.2 CONNECTOR FUNCTION DESCRIPTION..........................................................................................72
7.2 PARTS...................................................................................................................................................... 73
7.2.1 IC ..........................................................................................................................................................73
7.2.2 DISPLAY...............................................................................................................................................87
7.3 OPERATIONAL FLOW CHART ............................................................................................................... 88
7.4 CLEANING...............................................................................................................................................89
8. OPERATIONS ................................................................................................................................................ 90

DEH-P9600MP/XN/EW 5
5678
5678
C
D
F
A
B
E
1. SPECIFICATIONS

DEH-P9600MP/XN/EW
6
1234
1234
C
D
F
A
B
E

DEH-P9600MP/XN/EW 7
5678
5678
C
D
F
A
B
E

DEH-P9600MP/XN/EW
8
1234
1234
C
D
F
A
B
E
2. EXPLODEDVIEWS AND PARTS LIST
2.1 PACKING
N
OTES : • Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List.
• Screw adjacent to mark on the product are used for disassembly.
• For the applying amount of lobricants or glue, follow the instructions in this manual.
(In the case of no amount instructions,apply as you think it appropriate.)
"
1
2
24
3
55
6
7
8
9
10
11
12
14
15
16
17
17 18
18
19
20
22
23 25
26
27
4
21
13

DEH-P9600MP/XN/EW 9
5678
5678
C
D
F
A
B
E
PACKING SECTION PARTS LIST
Owner's Manual,Installation Manual
Mark No. Description Part No.
1-1 Owner's Manual CRD3813
1-2 Owner's Manual CRD3814
1-3 Owner's Manual CRD3815
1-4 Installation Manual CRD3816
* 1-5 Passport CRY1013
* 1-6 Warranty Card CRY1157
1-7 Polyethylene Bag CEG1116
* 1-8 Caution Card CRP1309
2 Cord Assy CDE6562
3 Accessory Assy CEA4111
4 Spring CBH1650
5 Screw Assy CEA4117
6 Screw BPZ20P060FZK
* 7 Polyethylene Bag CEG-127
8 Handle CNC5395
9 Bush CNV3930
* 10 Polyethylene Bag CEG-158
11 Polyethylene Bag CEG1088
12 Case Assy CXB8574
13 Microphone Assy CPM1054
14 Sub Carton CHA3258
15 Carton CHG5202
16 Contain Box CHL5202
17 Protector CHP2538
18 Protector CHP2539
19 Protector CHP2541
20 Protector CHP2546
21 Remote Control Unit CXC2665
22 Screw Assy CEA4114
23 Screw BMZ50P060FTC
24 Cord Assy CDE7436
25 Screw CBA1650
* 26 Polyethylene Bag CEG-127
27 Screw CMZ50P060FTC
Mark No. Description Part No.
Part No. Language
CRD3813 English,Spanish
CRD3814 German,French
CRD3815 Italian,Dutch
CRD3816 English,Spanish,German,French,Italian,Dutch

DEH-P9600MP/XN/EW
10
1234
1234
C
D
F
A
B
E
2.2 EXTERIOR(1)

DEH-P9600MP/XN/EW 11
5678
5678
C
D
F
A
B
E
EXTERIOR(1) SECTION PARTS LIST
Mark No. Description Part No.
1 Holder CND1979
2 Screw BSZ26P060FTC
3 Screw BSZ30P050FTC
4 •••••
5 Screw BSZ30P160FTC
6 Cord Assy CDE6562
7 Fuse(10A) CEK1136
8 Cord Assy CDE7439
9 Cap CNS1472
10 Resistor RS1/2PMF102J
11 Flat Cable CDE7440
12 Cord Assy CDE7433
13 Antenna Cable(CN401) CDH1336
14 Holder CNC6469
15 Holder CNC8659
16 •••••
17 Cushion CNM8890
18 Insulator CNM8590
19 Panel CNS6863
20 Tuner Amp Unit CWM9184
21 Screw ASZ26P080FTC
22 Screw BMZ26P140FTC
23 Clamper CEF1035
24 Clamper CEF1036
25 Plug(CN981) CKM1278
26 Plug(CN811) CKS-787
27 Connector(CN701) CKS3837
* 28 Plug(CN101) CKS1058
29 Connector(CN872) CKS1082
* 30 Connector(CN871) CKS2211
31 Connector(CN771) CKS1036
32 Connector(CN703) CKS3126
33 Connector(CN351) CKM1389
34 Holder CNC5399
35 Holder CNC9711
36 Holder CNC9713
37 Heat Sink CNR1615
38 FM/AM Tuner Unit CWE1645
39 Holder CND1054
40 Case Unit CXB8524
41 Remote Control Assy CXC2665
42 Cover CZN5357
43 CD Mechanism Module(S10WMACODE2)CXK5676
44 IC(IC301) PAL007A
45 Screw ISS26P055FTC
46 Transistor(Q742,901,921) 2SD2396
47 •••••
48 •••••
49 Cord Assy CDE7436
50 Cap CNV6727
51 Plug(CN761) CKS1035
52 Pin CKX-003
53 Lavel VRW-329
Mark No. Description Part No.

DEH-P9600MP/XN/EW
12
1234
1234
C
D
F
A
B
E
2.3 EXTERIOR(2)

DEH-P9600MP/XN/EW 13
5678
5678
C
D
F
A
B
E
EXTERIOR(2) SECTION PARTS LIST
Mark No. Description Part No.
1 Cable CDE7441
2 Screw BPZ20P080FZK
3 Button(AUDIO,FUNC) CAC8297
4 Button(ENT,DISP) CAC8298
5 Screw(M2x2) CBA1633
6 Holder CNC9800
7 Flexible PCB CNP6498
8 Keyboard Unit(OEL) CWM9191
9 Connector(CN1801) CKS4175
10 Connector(CN1802) CKS4792
11 Spacer CNM8982
12 PCB Assy(Service) CXX1799
13 OEL Module MXK8200
14 Grille Unit CXC2401
15 Case Unit CXC2406
16 Detach Grille Assy CXC3178
17 Screw BPZ20P080FZK
18 Button(EJECT) CAC8319
19 Button(OPEN) CAC8320
20 Button(TA) CAC8323
21 Button(1-6) CAC8317
22 Button Assy(CROSS) CXC3687
23 Button Unit(EQ) CXC2450
24 Spring CBH2543
25 Insulator CNM8897
26 Button(TEXT) CAC8324
27 Button Unit(BAND) CXC2451
28 Arm CNV6963
29 Keyboard Unit(LCD) CWM9194
30 LCD(LCD1901) CAW1704
31 Connector(CN1901) CKS4549
32 Holder CNC9648
33 Sheet CNM7512
34 Lighting Conductor CNV6914
35 Connector CNV6915
36 Grille Unit CXC2452
37 Knob Unit CXC3686
38 Jack(CN1902) CKN1016
39 Screw(M2x2) CBA1633
40 Screw CBA1561
41 Spring CBH2530
42 Cushion CNM8895
43 Arm CNV6962
44 Guide CNV6968
45 Guide CNV6967
46 Flexible PCB CNP7913
47 Screw ISS26P055FTC
48 Case Unit CXB7968
49 Cover Unit CXC2453
50 Spring CBH2545
51 Cushion CNM8894
52 Panel Unit CXB7953
53 Drive Unit CXC2514
54 Screw BMZ26P040FTC
55 Screw(M2x1.4) CBA1757
56 Screw(M2x2) CBA1633
57 Screw JFZ20P030FTC
58 Spring CBH2752
59 Spring CBH2753
60 Spring CBL1658
61 Cord CDE7587
62 Holder CND2244
63 Holder CND2245
64 Gear CNV8087
65 Gear CNV8088
66 Gear CNV8090
67 Gear CNV8091
68 Lever CNV8092
69 Switch(S951) CSN1051
70 Spring Switch(S952) CSN1052
71 Switch(S953) CSN1058
72 Chassis Unit CXC2454
73 Holder Unit CXC3023
74 Holder Unit CXC3024
75 Arm Unit CXC3025
76 Arm Unit CXC3026
77 Arm Unit CXC3027
78 Arm Unit CXC3028
79 Arm Unit CXC3029
80 Arm Unit CXC3030
81 Motor Unit(M951) CXC3190
82 Gear Unit CXC3094
83 Washer YE15FTC
84 Screw(M2x1.5) CBA1559
85 Sheet CNM7839
86 PCB CNX3607
87 Switch Unit CWS1370
88 Holder CND1971
89 Motor CXM1217
Mark No. Description Part No.

DEH-P9600MP/XN/EW
14
1234
1234
C
D
F
A
B
E
2.4 CD MECHANISM MODULE
A
D
H
L
M
NO
Q
R
A
B
C
D
E
F
GH
I
J
K
L
M
N
O
Q
B
16
25
13 83
42
68
28
82
4
71
23
J
K
38
23
59
87
86
5
13 34
5
5
13
44 5C
52
53
36
4
73
29
51
18
64
76
50
10
72
75
49
77
67
27
78
60
90 48
8
17
46
6
60
11 89
43
70
14
31
65
85
66
85
31
35 14
74
85
1
2
R
94
91
12
33
61
63
21
79
57
58
62 80
13
4
86
I
45
28
7
24
47
P
41
20
40
69
39
30
P
19
56
F
E22
81
15
G26
4
54
37
55
93
92
10
D
3
1GEM1024
2GEM1045
3GEM1035
1
1
1
1
1
1
1
1
2
2
2
2
1
1
1
1
1
2
2
1
3

DEH-P9600MP/XN/EW 15
5678
5678
C
D
F
A
B
E
CD MECHANISM MODULE SECTION PARTS LIST
Mark No. Description Part No.
1 CD Core Unit(S10WMACODE2)CWX2953
2 Connector(CN101) CKS4182
3 Connector(CN901) CKS4017
4 Screw BMZ20P035FTC
5 Screw BSZ20P040FTC
6 Screw(M2x4) CBA1362
7 Screw(M2x3) CBA1511
8 Screw(M2x3) CBA1527
9 •••••
10 Washer CBF1038
11 Washer CBF1060
12 Spring CBH2390
13 Spring CBH2606
14 Spring CBH2607
15 Spring CBH2608
16 Spring CBH2609
17 Spring CBH2610
18 Spring CBH2735
19 Spring CBH2612
20 Spring CBH2613
21 Spring CBH2614
22 Spring CBH2615
23 Spring CBH2616
24 Spring CBH2617
25 Spring CBH2620
26 Spring CBH2621
27 Spring CBH2641
28 Spring CBH2642
29 Spring CBH2643
30 Spring CBH2659
31 Spring CBH2688
32 •••••
33 Shaft CLA4441
34 Frame CNC9962
35 Frame CNC9963
36 Bracket CNC9966
37 Bracket CND1895
38 Arm CNC9968
39 Arm CND1909
40 Lever CND2032
41 Lever CNC9984
42 Sheet CNM8134
43 Collar CNV7798
44 Guide CNV7799
45 Arm CNV7800
46 Rack CNV7199
47 Holder CNV7201
48 Holder CNV7202
49 Arm CNV7203
50 Gear CNV7207
51 Gear CNV7208
52 Gear CNV7209
53 Gear CNV7210
54 Gear CNV7211
55 Gear CNV7212
56 Rack CNV7214
57 Arm CNV7215
58 Arm CNV7216
59 Guide CNV7217
60 Roller CNV7218
61 Gear CNV7219
62 Arm CNV7221
63 Arm CNV7220
64 Arm CNV7222
65 Damper CNV7313
66 Damper CNV7314
67 Arm CNV7341
68 Arm CNV7342
69 Guide CNV7360
70 Guide CNV7361
71 Holder CNV7437
72 Arm CNV7805
73 Gear CNV7595
74 Damper CNV7618
75 Motor Unit(M1) CXB6007
76 Chassis Unit CXC2318
77 Screw Unit CXB8729
78 Gear Unit CXC2397
79 Arm Unit CXC2316
80 Arm CND1896
81 Arm CND1894
82 Motor Unit(M2) CXB8933
83 Bracket CNC9985
84 •••••
85 Screw(M2x5) EBA1028
86 Screw JFZ20P020FTC
87 Screw JGZ17P022FTC
88 •••••
89 Washer YE20FTC
90 Pickup Unit(P10)(Service) CXX1641
91 Screw IMS26P030FTC
92 Spring CBL1635
93 Clamper CNV7197
94 Connector(CN902) CKS2193
Mark No. Description Part No.

DEH-P9600MP/XN/EW
16
1234
1234
C
D
F
A
B
E
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM
3.1 BLOCK DIAGRAM
BSCK,BDATA,BSRQ
D
CN901
Q101
M
LASER
DIODE
MONITOR
DIODE
S902
CLAMP S903 DSCSNS
FOCUS ACT.
M1
SPINDLE
MOTOR
M
M2
LOADING/CARRIAGE
MOTOR
TRACKING ACT.
LD-
MD
FO+
TO+
15
5
1
4
PICKUP UNIT
(P10)(SERVICE)
HOLOGRAM
UNIT
IC 301
BA5835FM
IC 201
UPD63761GJ
IC 703
3.3V REGULATOR
RF AMP, CD DECODER,
MP3 AND WMA DECODER
DIGITAL SERVO/DATA PROCESSOR
CD
DRIVER
3
VD
VD
3VDD
12
DOUT
5
CN101
TOP
FOP
16 SOP
15 SOM
18 LCOP
17 LCOM
22
2
LOEJ
46
DOUT
9
CONT
12 FOP
TD/FD
AC,BD
F,E
SD/MD
3
13 TOP
S901
HOME
S904
12EJ S905 8EJ
LD+ 14
142 LD
143 PD
CD CORE UNIT(S10WMACODE2)
1312
X702
DSCSNS
CONT
LOEJ
HOME
32
97
53
47
VDD
IC 203
NJM2391DL1-33
3.3V REGULATOR
V3R3D 1
3
VDCONT 49
CD3VON 46
S-812C33AUA-C2N
MICRO
COMPUTER
IC 701
PE5423A
4
V3R3D
19
VD2
VDD
2
15
5
1
4
14
CLAMP
4
VD2
VDCONT
30
31 8EJ
12EJ
IC 501
S-L2980A15MC-C6A
1.5V REGULATOR
V1R5 1,3
5V3R3D
X1 X2
1
CN902
34
XTAL
MCK
RX
TX
3
4
FRxD
FTxD
26
25
VD2
BRXEN,BRST,CSENSOUT
DRDY,RDY,DSPIN RQ,DSPCK,
DSPOUT,DSPCS
IC 101
HA12240FP
IP-BUS DRIVER
12
1
ASENBO
87
MUTE
XOUT
XIN
82
30
29
81
IC 601(
SYSTEM CONTROLLER
IC 601(2/2)
RESET
CN401
ANTENNA
BUS-
BU
BUS+
BUSL+
BUSL-
1
2
8
5
6TX
RX
IPPW
CN701
TUNER AMP UNIT
13
X
15
14
ASENB1
DSPOUT,DS
P
23
SYSPW
Q101
SYSTEM CO
N
VDD
8
5
1
7
CN101
11
FM/AM TUNER UNIT
21
12
19
20
PD591
3
PD5913A
Q741
5VDCONT
1
CD3VON 23 MCKRQ
Q742
BU
VR321
MIC321
6
4
1
2
3
5
CN811
VD
FEJSW1
FOPSW1
FCLSW1
MOTOR2
MOTOR1 IC 811
BA6288FS
3
14
Q812
Q811
BU
FLPPW
11
45
6
11
66
65
FLPOPN
FLPCLS
69
68
67
fclssw
fopnsw
flpejsw
M
M951
AUTOMATIC
FLAP MOTOR
CLOSE
OPEN
EJECT
SWITCH PCB
BU
OELPW 22
DPDT1 31
KYDT1 32
SWVDD1 40
BU
ILMPW2 43
DPDT2 35
KYDT2 36
SWVDD2
DSENS 79
94
A
E
ILMPW1 42
DISPPW 41
DIMMER 84
1
AS
L
46
47
25
18
Q743
22
Q744
IC 272
TC7SH08FU
1
1
3
4
CN703
4
MCKRQ
MCK2
MECHA VD
B
C
CDRX
CDTX
IC 17
2
NJM455
8
FR,RR
5
IC 17
3
NJM455
8
SWL,SW
5
IC 17
1
NJM455
8
FL,RL
5
IC 20
1
NJM455
8
1
IC 211
PCM1606EG
DAC
3
IC 271
AK7730VT
DSP
2
DATA
IC 251
TC74VHC08FT IC 252
TC74VHC08FT
3V 5V 5V 3V
11 12 13
SW
R
F
2
1
DATA
SDOUT3
SDOUT2
SDOUT1
DATA3
DATA2
DATA1 FL
SWL
RR
IC 231
NJM2100V
ADC INPUT
FR
SWR
RL
3
3
3
11
13
8
9
10
12
48
AINL+L
3
1
LPF
5
dsppw 44
DAC5V 15 VCC
DAC5V 8
A3V 8
D3V
14
D3V 5
9
A3V 39
71
72
56
55
57
ce@
CE1
TUN 3.3V
SYS+B
VDD
DO
DI
CK
Q402
Q401
RDS_CK
RDS_LOCK
RDS_DATA
RDS_HSLK
RDS_CK
RDS_DATA
RDS_LOCK
RDS_HSLK
FMRF
ANT adj RF adj
FM ANT
T51 CF52
CF51
RFGND OSCGND DGND AUDIOGND NC VCC VDD_3.3
3.3V 2.5V
IC 4
3.3V 2.5V
←
WC
CE2
ROM_VDD
SL
DI
CK
CE1
NC
DO
7 6 13 5 10 9 8 11 14 18 19 20 21
1
3
212 1522 16 4 17
IC 1
3.3V
AM ANT FMRF
ATT
LPF
OSC
IC 3 EEPROM
5.0V
IC 5
5V 3.3V
←
ATT
MIXER, IF AMP
24
23
Rch
Lch
DET, FM MPX,
RDS DECODER
IC 2
2.5V
rdslk
rck
RDS57K
RDT
pce@
PCE1
PDI
PDO
PCK
97
SL SL
DSPMOD
45
PRO STD
VDD
DSP MODE

DEH-P9600MP/XN/EW 17
5678
5678
C
D
F
A
B
E
12 1VDD
BU
74
73
ASENBO
29 FL
27 RL
87
MUTE
XOUT
XIN
3
5
23
21
FL-
FL+
RL-
RL+
AM
16
PEE 24
Phone+
8
Phone-
9
Out1L
82
30
29
81
FLIN
12
RLIN
14
22 4
RESET
POWER AMP
IC 601(1/2)
O
NTROLLER
1(2/2)
IC 131
PML011A
IC 651
BD4835G
IC 301
PAL007A
RESET
VDD
Q901
Q931
SYSPW
TX
RX
IPPW E-VOL /
SOURCE SELECTOR
STBYMUTE
13
X601
15
2
DSPOUT,DSPCK
TUN L
BUSL+
BUSL-
SYS+B
BU
Q922
Q923
23
SYSPW
Q301
SWL
Q352
SWL
Q353
FL
Q351
FL
RL
25
SWL
MUTE
SYSTEM CONTROLLER
Q941
Q951
VDD
83
TELIN 10
25
B.REMOTE
In2L
VDD REGULATOR
ILL SENSE
BACKUP SENSE
ACC SENSE
TELEPHONE MUTE
SYS+B REG
5
9
11
12
10
1
3
8
4
2
IC 571
PA2028A
HIGH OUT
OUT3 16
OUT5 14
OUT1 18
9
11
7
IN3
IN5
IN1
SWL
FL
RL
CN981
BUZZER
Q364
BU
CN351
BACK UP
GND
RR
+
RR
-
FR
+
FR
-
FL
+
FL
-
RL
+
RL
-
ACC
GND
BACK
UP
B.
REM
ACC
ILL
TELMUTE
B.REM
ILL
FL-
FL+
RL-
RL+
Q921
Q501 MUTE
5
9
1
RL
bsens
asens
isens
PD5913A
9
13A
VR321
MIC321
Q842
Q841
BU
OELPW 22 IC 871
TC74VHCT125AFT 9
3
5
CN871
4
6
OEL+B
DPDT1
KYDT1
DPDT1 31
KYDT1 32
Q861
Q862
VDD2
SWVDD1 40
1
SWVDD5V
Q963
Q962
BU
ILMPW2 43
4
CN872
10
11
ILM+B
DPDT2
KYDT2
DPDT2 35
KYDT2 36 Q851
Q852
VDD2
SWVDD2
D
SENS 79
94
6
SWVDD2
2
ILM+B1
OEL+B
ILM+B 4
10
11
6
4
5
3
8
7
CN1801
OEL+B
DPDT2
KYDT2
SWVDD5V2
ILM+B2
CN1901
ILM+B
DPDT
KYDT
SWVDD5V
KEYBOARD UNIT(LCD)
KEYBOARD UNIT(OEL)
Q651
5
RST1 5RST
VDD2
Q911
ACC
5V REGULATOR
IC 1805
PD5917A
GRILLE µ-COM
KEY MATRIX
IC 1806
PD8122A
ROM
OEL UNIT
IC 1808
TC7WH32FK
1
28
27 DPDT
KYDT
5IC 1802
S-818A33AUC-BGN
13.3V
12
XOUT
XIN
11
X1801 13
IC 1902
PD6340A
GRILLE µ-COM
KEY MATRIX
LCD1901
20
18 DPDT
KYDT
XO
XI
22
X1901
23
SW5V
3IC 1901
TSOP4840SB1
1
17
REM
OPT IN
SW5V
77
RESET
B
C
10A
FUSE B.UP
ACC
ILM
MUTE
GND
FL-
FL+
RL-
RL+
B.REM
IC 1807
PD6460A
FLASH
MEMORY
7
26
32
RS2
ce
Q1906
CN1902
22
AEQMIC
AEQGND
REMOTE CONTROL SENSOR
Q752 Q751
AEQMIC
A
AUTO
EQ AEQGND
A
MPX-RDS
17
AUTOEQ
AUTOEQ
211
Q964
ILMPW1 42
ILM+B1
SWVDD2
33
BL+B
Q834
Q835
BL+B
DISPPW 41
Q833
DIMMER 84 BU
1
ASL
IC 321
NJM4558MD 3IC 322
NJM4558MD
Q321
ASLIN 90 VDD
67
46
47
25
18
B
CCDRX
CDTX
8
5
IC 172
NJM4558MD
FR,RR ch
57
IC 173
NJM4558MD
SWL,SWR ch
57
IC 171
NJM4558MD
FL,RL ch
57
IC 201
NJM4558MD
15
FL
W
L
RR
FR
W
R
RL
3
3
3
1
1
1
38
36
35
34
39
37
44
11
13
8
9
10
12
FR
RR
SWL
SWR
FL
RL In1L
In3R
In3L
In2R
In1R
1
LPF
SYS+B
SPKR3L
SPKR1L
SPKR2L
IC 671
NJM2391DL1-33
TUNER 3V
1TUN3.3V
3
Q692 DAC 5V
Q691
dsppw 44
DSPPW
BU IC 691
BA05FP
1
DSP 3V REG
IC 681
S-818A33AUC-BGN
3
5
1
DAC5V
D3V
A3V
DAC5V 8
Q902
DALMON 20
BL+B
Q965
SWVDD1
71
72
56
55
57
ce@
CE1
DO
DI
CK
rdslk
rck
RDS57K
RDT
pce@
PCE1
PDI
PDO
PCK
97
SL SL
DSPMOD
45
R
OSTD
VDD
DSP MODE
CONNECTOR PCB
F
11DSENS
DSENS

DEH-P9600MP/XN/EW
18
1234
1234
C
D
F
A
B
E
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)
A-a A-b
A-a A-b
A-b
A-a
Large size
SCH diagram
Guide page
Detailed page
Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or
"ELECTRICAL PARTS LIST". A-a
A E
1234
M
M951
AUTOMATIC FLAP
CXB8939
S952 CSN1052 (CLOSE)
S951 CSN1051 (OPEN)
S953 CSN1058 (EJECT)
DCN901
CN902
BCN1801
E
SWITCH
PCB
FM/AM TUNER UNIT
TUNER:-26.0dBs
(FM:30%, AM:30%)
IP-BUS:+2.2dBs

DEH-P9600MP/XN/EW 19
5678
5678
C
D
F
A
B
E
A-b
A-a A-b
A-a A-b
A-b
A-a
A
1234
: The power supply is shown with the marked box.
Decimal points for resistor
and capacitor fixed values
are expressed as :
2.2 2R2
0.022 R022
←
←
The >mark found on some component parts indicates
the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.
Symbol indicates a resistor.
No differentiation is made between chip resistors and
discrete resistors.
NOTE :
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
discrete capacitors.
>
F
ATUNER AMP UNIT
REAR
R CH
SUB
WOOFER
R CH
SUB
WOOFER
L CH
REAR
L CH
FRONT
R CH
FRONT
L CH
BACKUP
GND
RL-
RL+
FL-
FL+
B.REM
ILL
ACC
TEL
CEK1136
10A
RR-
RR+
FR-
FR+
>
RR
+
RR
-
FR
+
FR
-
FL
+
FL
-
RL
+
RL
-
ACC
GND
BACK
UP
B.
REM
ILL
TUNER:-27.3dBs
IP-BUS:+1.73dBs
TUNER: -4.37dBs
IP-BUS:+7.66dBs
CD:+7.55dBs
TUNER: +6.13dBs
IP-BUS:+18.16dBs
CD:+18.05dBs
TUNER:+21.63dBs
IP-BUS:+33.66dBs
CD:+33.55dBs

DEH-P9600MP/XN/EW
20
1234
1234
C
D
F
A
B
E
A-a A-b A-a
A-a
A-b
E
123
M
M951
AUTOMATIC FLAP
CXB8939
S952
CSN1052
(CLOSE)
S951
CSN1051
(OPEN)
S953
CSN1058
(EJECT)
E
SWITCH PCB