
3 Press cor dto set the sensitivity.
FM: LOCAL 1—LOCAL 2—LOCAL 3—
LOCAL 4
AM: LOCAL 1—LOCAL 2
The LOCAL 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 1to 6.
Once stored you can tune in to those frequen-
cies with the touch of button.
!Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons 1to 6.
1 Press FUNCTION to select BSM.
2 Press ato turn BSM on.
Six strongest broadcast frequencies will be
stored in the order of their signal strength.
#To cancel the storage process, press b.
Built-in Player
Playing a disc
1 Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
#Be sure to turn up the label side of a disc.
#After a CD (CD-ROM) has been inserted, press
SOURCE to select the built-in CD player.
#You can eject a CD (CD-ROM) by pressing
EJECT.
2 Press aor bto select a folder when
playing a WMA/MP3/WAV disc.
#You cannot select a folder that does not have
a WMA/MP3/WAV file recorded in it.
#To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
3 To perform fast forward or reverse,
press and hold cor d.
#If you select ROUGH, pressing and holding c
or denables you to search every 10 tracks in the
current disc (folder). (Refer to Searching every 10
tracks in the current disc or folder on the next
page.)
4 To skip back or forward to another
track, press cor d.
Notes
!Read the precautions with discs and player on
page 13.
!If an error message such as ERROR-11 is dis-
played, refer to Error messages on page 13.
!There is sometimes a delay between starting
up disc playback and the sound being issued.
When being read, FRMTREAD is displayed.
!When playing CD-EXTRA or MIXED-MODE
CDs, WMA/MP3/WAV and CD-DA can be
swithced by pressing BAND.
!If you have switched between WMA/MP3/
WAV files and audio CD-DA, playback starts at
the first track on the disc.
!The built-in CD player can play back a WMA/
MP3/WAV file recorded on CD-ROM. (Refer to
page 14 for files that can be played back.)
!When playing back VBR (variable bit rate) re-
corded files, erapsed play time may not be dis-
played correctly.
!When playing WMA/MP3/WAV disc, there is
no sound on fast forward or reverse.
Repeating play
Repeat play plays the same track/folder within
the selected repeat play range.
1 Press FUNCTION to select RPT.
2 Press cor dto select the repeat range.
DSC –Repeat all tracks
TRK –Repeat just the current track
FLD –Repeat the current folder
#If you select another folder during repeat play,
the repeat play range changes to disc repeat.
Operating this unit
En
8
Section
02