Pioneer FH-P4100R User manual

Black plate (1,1)
Multi-CD control DSP High power CD Cassette player
with RDS tuner
FH-P4100R
Operation Manual
English Italiano Español
1 CRD3576-A

Black plate (2,1)
2 CRD3576 A
2 CRD3576-A
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, put them away
in a safe place for future reference.
Before You Start
About this unit
About this manual
Precautions
In case of trouble
Protecting your unit from theft
Removing the front panel 5
Attaching the front panel 5
Resetting the microprocessor 5
Whats What
Head unit 6
Optional remote control 7
Power ON/OFF
Turning the unit on 8
Selecting a source 8
Turning the unit off 8
Tuner
istening to the radio 9
Introduction of advanced tuner
operation 10
Storing and recalling broadcast
frequencies 10
Tuning in strong signals 11
Storing the strongest broadcast
frequencies 11
RDS
Introduction of RDS operation 12
Switching the RDS display 13
Selecting alternative frequencies 13
Using PI Seek 13
Using Auto PI Seek for preset
stations 13
imiting stations to regional
programming 1
Receiving traffic announcements 1
Responding to the TP alarm 15
Using PTY functions 15
Searching for a RDS station by PTY
information 15
Using news program interruption 15
Receiving PTY alarm broadcasts 16
Using radio text 16
Displaying radio text 16
Storing and recalling radio text 17
PTY list 18
Cassette Player
Playing a tape 19
Introduction of advanced cassette player
operation 21
Repeating play 21
Skipping blank tape sections 21
Using Dolby noise reduction 22
Built-in CD Player
Playing a CD 23
Introduction of advanced built-in CD player
operation 25
Repeating play 25
Playing tracks in a random order 26
Scanning tracks of a CD 26
Pausing CD playback 26
Using disc title functions 26
Entering disc titles 26
Displaying disc titles 27
Using CD TEXT functions 27
Displaying titles on CD TEXT
discs 28
Scrolling titles in the display 28
Multi-CD Player
Playing a CD 29
Introduction of advanced multi-CD player
operation 31
Repeating play 31
Playing tracks in a random order 32
Scanning CDs and tracks 32
Pausing CD playback 32
Contents
En
2

Black plate (3,1)
3 CRD3576 A
3 CRD3576-A
Using ITS playlists 33
Creating a playlist with ITS
programming 33
Playback from your ITS playlist 33
Erasing a track from your ITS
playlist 3
Erasing a CD from your ITS
playlist 3
Using disc title functions 3
Entering disc titles 3
Displaying disc titles 35
Selecting discs from the disc title
list 35
Using CD TEXT functions 36
Displaying titles on CD TEXT
discs 36
Scrolling titles in the display 36
Using compression and bass emphasis 36
50-disc multi-CD player 37
Audio Adjustments
Introduction of audio adjustments 38
Using balance adjustment 38
Adjusting loudness 39
Adjusting source levels 39
Digital Signal Processor
Using the digital signal processor 0
Using the graphic equalizer 1
Recalling equalizer curves 1
Adjusting equalizer curves 1
Adjusting 9-band graphic
equalizer 1
Using sound field control, octaver and BBE
sound 2
Recalling sound field programs 2
Adjusting BBE sound level 3
Using the position selector 3
Using subwoofer output
Adjusting subwoofer settings
Using the high pass filter
Initial Settings
Adjusting initial settings 5
Setting the FM tuning step 5
Switching Auto PI Seek 6
Switching the warning tone 6
Switching the auxiliary setting 6
Switching the dimmer setting 6
Switching the rear output setting 6
Selecting the digital attenuator 7
Adjusting display contrast 7
Other Functions
Introduction of other functions 8
Using the demonstration 8
Using different entertainment displays 8
Cellular telephone muting 8
Using the AUX source 9
Selecting AUX as the source 9
Setting the AUX title 9
Additional Information
Understanding built-in CD player error
messages 50
Cassette tapes 50
Cleaning the playback head 50
Music search and repeat functions during
tape playback 50
CD player and care 51
CD-R/CD-RW discs 51
Specifications 52
Contents
En 3
English

Black plate (4,1)
CRD3576-A
About this unit
This product complies with the EMC Directives
(89/336/EEC, 92/31/EEC) and CE Marking
Directive (93/68/EEC).
The tuner frequencies on this unit are allo-
cated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other
areas may result in improper reception. The
RDS function operates only in areas with FM
stations broadcasting RDS signals.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this productspo-
tential and to maximize your listening enjoy-
ment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe precautions on this page
and in other sections.
This manual explains head unit operation. You
can perform the same operations with the
steering remote control (sold separately).
Precautions
!ACLASS 1 LASER PRODUCT label is affixed
to the top of this unit.
CLASS 1
LASER PRODUCT
!The Pioneer CarStereo-Pass is for use only in
Germany.
!Keep this manual handy as a reference for
operating procedures and precautions.
!Always keep the volume low enough so you
can hear sounds outside of the car.
!Protect this product from moisture.
!If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
In case of trouble
Should this product fail to operate properly,
contact your dealer or nearest authorized Pio-
neer Service Station.
Protecting your unit from
theft
The front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
!If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound.
!You can turn off the warning tone. See
Switching the warning tone on page 46.
Before You Start
01
En
Section

Black plate (5,1)
5 CRD3576-A
Important
!Never use force or grip the display and the
buttons tightly when removing or attaching.
!Avoid subjecting the front panel to excessive
shocks.
!Keep the front panel out of direct sunlight
and high temperatures.
Removing the front panel
1 Press DETACH to release the front
panel.
Press DETACH and the left side of the panel is
released from the head unit.
DETACH button
2 Grab the front panel and remove.
Grab the left side of the front panel and pull
away to the right. The front panel will be de-
tached from the head unit.
Put the front panel into the
protective case provided for safe keeping.
Attaching the front panel
1 Place the front panel flat against
the head unit.
2 Press the front panel into the face
of the head unit until it is firmly seated.
Resetting the
microprocessor
The microprocessor must be reset under the
following conditions:
!Prior to using this unit for the first time after
installation
!If the unit fails to operate properly
!When strange or incorrect messages appear
on the display
1 Remove the front panel.
See Removing the front panel on this page.
2 Press RESET on the head unit with a
pen tip or other pointed instrument.
RESET button
Before You Start 01
En 5
English
Section

Black plate (6,1)
6 CRD3576-A
1
5
!
7
6
9
0
8
~
3
-
4
=
@
2
Head unit
1DETACH button
Press to remove the front panel from the
head unit.
2FUNCTION button
Press to select functions.
3AUDIO button
Press to select various sound quality con-
trols.
4DSP button
Press to select sound field functions.
5TAPE EJECT button
Press to eject a tape from your cassette
player.
6SOURCE button
This unit is switched on by selecting a
source. Press to cycle through all of the
available sources.
7ENTERTAINMENT button
Press to change to the entertainment dis-
play.
8TA button
Press to switch traffic announcements func-
tion on or off.
9DISPLAY button
Press to select different displays.
a16 buttons
Press for preset tuning and disc number
search when using a multi-CD player.
ba/b/c/dbuttons
Press to do manual seek tuning, fast for-
ward, reverse and track search controls.
Also used for controlling functions.
cTEXT button
Press to switch radio text function on or off.
dCD EJECT button
Press to eject a CD from your built-in CD
player.
eBAND button
Press to select among three FM or MW/ W
bands and cancel the control mode of func-
tions.
fVOLUME button
Press to increase or decrease the
volume.
Whats What
02
En
6
Section

Black plate (7,1)
7 CRD3576-A
@
#
-
23
6
!
Optional remote control
The steering remote control CD-SR100 is sold
separately. Operation is the same as when
using the button on the head unit. See the ex-
planation of the head unit about the operation
of each button with the exception of ATT,
which is explained below.
gATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
Whats What 02
En 7
English
Section

Black plate (8,1)
8 CRD3576-A
urning the unit on
%Press SOURCE to turn the unit on.
When you select a source the unit is turned
on.
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in this unit (refer to page 23). To switch to the
cassette player, load a cassette tape in this
unit (refer to page 19).
%Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Built-in CD playerTunerCassette player
Multi-CD playerExternal unit 1Exter-
nal unit 2AUX
Notes
!In the following cases, the sound source will
not change:
When a product corresponding to each
source is not connected to this unit.
When no disc is set in this unit.
When no cassette is set in this unit.
When no magazine is set in the multi-
CD player.
When the AUX (auxiliary input) is set to
off (refer to page 46).
!External unit refers to a Pioneer product
(such as one available in the future) that,
although incompatible as a source, enables
control of basic functions by this unit. Two
external units can be controlled by this unit.
When two external units are connected, the
allocation of them to external unit 1 or
external unit 2 is automatically set by this unit.
!When this units blue/white lead is
connected to the cars auto-antenna relay
control terminal, the cars antenna extends
when this units source is switched on. To
retract the antenna, switch the source off.
urning the unit off
%Press SOURCE and hold for at least
one second to turn the unit off.
Power ON/OFF
03
En
8
Section

Black plate (9,1)
9 CRD3576-A
Listening to the radio
1 3
2
5
467
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
This units AF (alternative frequencies search)
function can be switched on and off. AF
should be off for normal tuning operation (re-
fer to page 13).
1Band indicator
Shows which band the radio is tuned to,
MW, W or FM.
2Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
3Frequency indicator
Shows to which frequency the tuner is
tuned.
4SOURCE button
Press to select the tuner as the source.
5BAND button
Press to select among three FM or MW/ W
bands.
6c/dbuttons (Manual or seek tuning)
Press to tune in a radio station.
7VOLUME button
Press to increase or decrease the volume.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2 Use VOLUME to adjust the sound
level.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1,F2,F for FM or MW/LW.
4 To perform manual tuning, press c
or dwith quick presses.
The frequencies move up or down step by
step.
5 To perform seek tuning, press and
hold cor dfor about one second and
release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by pressing
either cor dwith a quick press.
#If you press and hold cor dyou can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Note
When the frequency selected is being broadcast
in stereo the stereo (5) indicator will light.
uner 0
En 9
English
Section

Black plate (10,1)
10 CRD3576-A
Introduction of advanced
tuner operation
2
1
3
5
7
6
4
8
1Function display
Shows the function status.
2Preset number indicator
Shows what preset has been selected.
3LOC indicator
Shows when local seek tuning is on.
4FUNCTION button
Press to select an advanced function.
5BAND button
Press to return to the frequency display.
616 buttons (Preset tuning)
Press for one-button selection of radio sta-
tions you have entered into memory. To
store a radio station, press and hold.
7c/dbuttons
Press to choose the item (mode) of the se-
lected function.
8a/bbuttons
Press to select frequencies stored in mem-
ory and turn the selected function on/off.
%Press FUNCTION to display the
function names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
BSM (best stations memory)REG (regional)
LOCAL (local seek tuning)PTY SELECT
(program type selection)TA (traffic an-
nouncement standby)NEWS (news program
interruption)AF (alternative frequencies
search)
#To return to the frequency display, press
BAND.
#If MW/ W band is selected, you can only se-
lect BSM or LOCAL.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.
Storing and recalling
broadcast frequencies
If you press any of the preset tuning buttons
16you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
%When you find a frequency that you
want to store in memory press a preset
tuning button 16 and hold until the preset
number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
uner
0
En
10
Section

Black plate (11,1)
11 CRD3576-A
The next time you press the same preset tun-
ing button 16the radio station frequency is
recalled from memory.
Notes
!Up to 18 FM stations, 6 for each of the three
FM bands, and 6 MW/ W stations can be
stored in memory.
!You can also use aand bto recall radio
station frequencies assigned to preset tuning
buttons 16.
uning in strong signals
ocal seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Press FUNCTION to select LOCAL.
Press FUNCTION until LOCAL appears in the
display.
2 Press ato turn local seek tuning on.
ocal seek sensitivity (e.g., LOCAL 2) appears
in the display.
Press cor dto set the sensitivity.
There are four levels of sensitivity for FM and
two levels for MW/ W:
FM: LOCAL 1LOCAL 2LOCAL 
LOCAL 4
MW/ W: LOCAL 1LOCAL 2
The LOCAL 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
4 When you want to return to normal
seek tuning, press bto turn local seek
tuning off.
LOCAL :OFF appears in the display.
Storing the strongest
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 16and
once stored there you can tune in to those fre-
quencies with the touch of a button.
1 Press FUNCTION to select BSM.
Press FUNCTION until BSM appears in the
display.
2 Press ato turn BSM on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning buttons 16in or-
der of their signal strength. When finished,
BSM stops flashing.
#To cancel the storage process, press b.
Note
Storing broadcast frequencies with BSM may
replace broadcast frequencies you have saved
using 16.
uner 0
En 11
English
Section

Black plate (12,1)
12 CRD3576-A
Introduction of RDS
operation
3 5
64
2
1
8
79
RDS (radio data system) is a system for provid-
ing information along with FM broadcasts.
This inaudible information provides such fea-
tures as program service name, program type,
traffic announcement standby, automatic tun-
ing and program type tuning, intended to aid
radio listeners in finding and tuning in to a de-
sired station.
1Program service name
Shows the type of broadcast program.
2AF indicator
Shows when AF (alternative frequencies
search) function is on.
3TEXT indicator
Shows when radio text is broadcast from a
RDS station.
4NEWS indicator
Shows when NEWS (news program inter-
ruption) function is on.
5T indicator
Shows when TA (traffic announcement
standby) function is on.
6TP ( ) indicator
Shows when a TP station is tuned in.
7TA button
Press to switch TA function on or off. Press
and hold to switch NEWS function on or off.
8DISPLAY button
Press to change the display.
9TEXT button
Press to switch radio text function on or off.
%Press FUNCTION to display the
function names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
BSM (best stations memory)REG (regional)
LOCAL (local seek tuning)PTY SELECT
(program type selection)TA (traffic an-
nouncement standby)NEWS (news program
interruption)AF (alternative frequencies
search)
#To return to the frequency display, press
BAND.
#If MW/ W band is selected, you can only se-
lect BSM or LOCAL.
Notes
!If you do not operate the function within
about 30 seconds, the display is automatically
returned to the frequency display.
!RDS service may not be provided by all
stations.
!RDS functions like AF and TA are only active
when your radio is tuned to a RDS station.
RDS
05
En
12
Section

Black plate (13,1)
13 CRD3576-A
Switching the RDS display
When you tune in a RDS station its program
service name is displayed. If you want to know
the frequency you can.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Program service namePTY information
Frequency
PTY (program type ID code) information is
listed on page 18.
#PTY information and the frequency of the
current station appears on the display for eight
seconds.
#If a PTY code of zero is received from a sta-
tion, NONE is displayed. This indicates that the
station has not defined its program contents.
#If the signal is too weak for this unit to pick
up the PTY code, NO PTY is displayed.
Selecting alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, the unit will automatically search for a
different station in the same network which is
broadcasting a stronger signal.
!AF is on as a default.
1 Press FUNCTION to select AF.
Press FUNCTION until AF appears in the dis-
play.
2 Press ato turn AF on.
Press aand AF :ON is displayed.
Press bto turn AF off.
Press band AF :OFF is displayed.
Notes
!Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
!When you recall a preset station, the tuner
may update the preset station with a new
frequency from the stations AF list. (This is
only available when using presets on the F1 or
F2 bands.) No preset number appears on the
display if the RDS data for the station received
differs from that for the originally stored
station.
!Sound may be temporarily interrupted by
another program during a AF frequency
search.
!When the tuner is tuned to a non-RDS
station the AF indicator flashes.
!AF can be switched on or off independently
for each FM band.
Using PI Seek
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station
with the same programming. During the
search, PI Seek is displayed and the output is
muted. The muting is discontinued after com-
pletion of the PI seek, whether or not a differ-
ent station is found.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
!The default setting for Auto PI Seek is off.
See Switching Auto PI Seek on page 46.
RDS 05
En 13
English
Section

Black plate (14,1)
1 CRD3576-A
Limiting stations to regional
programming
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programs.
1 Press FUNCTION to select REG.
Press FUNCTION until REG appears in the dis-
play.
2 Press ato turn the regional
function on.
Press aand REG :ON is displayed.
Press bto turn the regional
function off.
Press band REG :OFF is displayed.
Notes
!Regional programming and regional
networks are organized differently depending
on the country (i.e., they may change
according to the hour, state or broadcast
area).
!The preset number may disappear on the
display if the tuner tunes in a regional station
which differs from the originally set station.
!The regional function can be turned on or off
independently for each FM band.
Receiving traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other networks TP station (a station
carrying information which cross-references
TP stations).
1 Tune in a TP or enhanced other
networks TP station.
When you are tuned into a TP or enhanced
other networks TP station the TP ( ) indica-
tor will light.
2 Press TA to turn traffic
announcement standby on.
Press TA and the Tindicator appears in the
display. The tuner will standby for traffic an-
nouncements.
#To turn traffic announcements standby off,
press TA again.
Use VOLUME to adjust the TA
volume when a traffic announcement
begins.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA while a traffic
announcement is being received to cancel
the announcement.
The tuner returns to the original source but re-
mains in the standby mode until TA is pressed
again.
RDS
05
En
1
Section

Black plate (15,1)
15 CRD3576-A
Notes
!You can also turn on or off TA function in the
menu that appears with the pressing of
FUNCTION.
!The system switches back to the original
source following traffic announcement
reception.
!TA can be activated from sources other than
the tuner if the tuner was last set to the FM
band but not if it was last set to the MW/ W
band.
!If the tuner was last set to FM, turning on TA
lets you operate other tuning functions while
listening to sources other than the tuner.
!Only TP and enhanced other networksTP
stations are tuned in during seek tuning or
BSM when TA is on.
Responding to the P alarm
When a TP or enhanced other networksTP
station is lost due to a weak signal the Tindi-
cator is extinguished and a series of short
beeps, about five seconds long, sound to re-
mind you to select another TP or enhanced
other networks TP station.
%When listening to the tuner, tune in
another TP or enhanced other networksTP
station.
#When listening to sources other than the tu-
ner the unit will automatically seek out a TP sta-
tion with the strongest signal after a 10- or 30-
second delay. The delay is 10 seconds if TA is on
and 30 seconds if TA and AF are on.
Using P Y functions
You can tune in a station by using PTY infor-
mation.
Searching for a RDS station by
P Y information
You can search for general types of broadcast-
ing programs, such as those listed on page
18.
1 Press FUNCTION to select
PTY SELECT.
Press FUNCTION until PTY SELECT appears in
the display.
2 Press cor dto select a program
type.
There are four program types:
News&InfPopularClassicsOthers
Press ato begin the search.
When you press athe program type name in
the display begins to flash. The unit searches
for a station broadcasting that program type.
When a station is found its program service
name is displayed.
#To cancel the search, press b.
Notes
!The program of some stations may differ
from that indicated by the transmitted PTY.
!If no station is broadcasting the type of
program you searched for, NOT FOUND is
displayed for about two seconds and then the
tuner returns to the original station.
Using news program
interruption
When a news program is broadcast from a
PTY code news station the unit can switch
from any station to the news broadcast sta-
tion. When the news program ends, reception
of the previous program resumes.
RDS 05
En 15
English
Section

Black plate (16,1)
16 CRD3576-A
%Press TA and hold to turn on news
program interruption.
Press TA until NEWS appears in the display.
#To turn off news program interruption, press
TA and hold until NEWS disappears from the dis-
play.
#A news program can be cancelled by press-
ing TA.
Note
You can also turn on or off news program in the
menu that appears with the pressing of
FUNCTION.
Receiving P Y alarm broadcasts
PTY alarm is a special PTY code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, ALARM appears on the display
and the volume adjusts to the TA volume.
When the station stops broadcasting the
emergency announcement, the system re-
turns to the previous source.
!An emergency announcement can be can-
celled by pressing TA.
Using radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
Notes
!When radio text is received, TEXT is
displayed.
!The tuner automatically memorizes the three
latest radio text broadcasts received,
replacing text from the least recent reception
with new text when it is received.
Displaying radio text
You can display the currently received radio
text and the three most recent radio text.
1 Press TEXT to display radio text.
Radio text for the currently broadcasting sta-
tion is displayed and is automatically scrolled
in the display.
#You can cancel radio text display by pressing
TEXT.
#When no radio text is received, NO TEXT is
displayed and the display of radio text is can-
celled after two seconds.
2 Press cor dto control scrolling.
Pressing cor dstops scrolling of the radio
text data. Each additional press scrolls the
radio text data one character at a time.
Press aor bto recall the three most
recent radio text.
Pressing aor bswitches between the current
and the three radio text data displays.
#If there is no radio text data in memory the
display will not change.
Notes
!Display of radio text is cancelled after text
data has scrolled three times through the
display.
!If you do not perform an operation within
eight seconds, the radio text mode is
cancelled.
RDS
05
En
16
Section

Black plate (17,1)
17 CRD3576-A
Storing and recalling radio text
You can store data from up to six radio text
transmissions at buttons 16.
1 Display the radio text you want to
store in memory.
Refer to Displaying radio text on the previous
page.
2 Press any of 16 and hold to store
the selected radio text.
The memory number will display and the se-
lected radio text has been stored in memory.
The next time you press the same 16button
in the radio text display the stored text is re-
called from memory.
RDS 05
En 17
English
Section

Black plate (18,1)
18 CRD3576-A
P Y list
General Specific Type of program
News&Inf News News
Affairs Current affairs
Info General information and advice
Sport Sports
Weather Weather reports/meteorological information
Finance Stock market reports, commerce, trading, etc.
Popular Pop Mus Popular music
Rock Mus Contemporary modern music
Easy Mus Easy listening music
Oth Mus Non categorized music
Jazz Jazz
Country Country music
Nat Mus National music
Oldies Oldies music, golden oldies
Folk mus Folk music
Classics . Class ight classical music
Classic Serious classical music
Others Educate Educational programs
Drama All radio plays and serials
Culture National or regional culture
Science Nature, science and technology
Varied ight entertainment
Children Childrens
Social Social affairs
Religion Religion affairs or services
Phone In Phone In
Touring Travel programs, not for announcements about traffic pro-
blems
eisure Hobbies and recreational activities
Document Documentaries
RDS
05
En
18
Section

Black plate (19,1)
19 CRD3576-A
Playing a tape
123
57
68
4
These are the basic steps necessary to play a
tape with your cassette player. More advanced
cassette player operation is explained starting
on page 21.
1Tape direction indicator
Shows the direction of the tape transport.
2Play time indicator
Shows the elapsed playing time of the cur-
rent side of the tape.
3MTL indicator
Shows when a metal or chrome tape is in-
serted.
4TAPE EJECT button
Press to eject a tape from your cassette
player.
5SOURCE button
Press to select the cassette player as the
source.
6BAND button
Press to change the direction of the tape
transport and return to playback after fast
forward or rewind.
7c/dbuttons
Press to fast forward or rewind the tape.
8VOLUME button
Press to increase or decrease the volume.
1 Insert a cassette tape into the
cassette loading slot.
Playback will automatically start.
Cassette loading slot
#You can eject a cassette tape by pressing
TAPE EJECT.
2 After a cassette tape has been
inserted, press SOURCE to select the
cassette player.
Press SOURCE until you see Cassette dis-
played.
Use VOLUME to adjust the sound
level.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
4 To perform fast forward or rewind,
press cor d.
FF or REW appears in the display.
#To cancel fast forward or rewind and return
to playback, press BAND.
#You can cancel fast forward or rewind by
pressing cor din the same direction twice.
Cassette Player 06
En 19
English
Section

Black plate (20,1)
20 CRD3576-A
5 To perform forward or rewind music
search, press cor dtwice.
F-MS (forward music search) or R-MS (rewind
music search) appears in the display. The cas-
sette player will fast forward or rewind to the
next or previous blank spot on the tape and be-
gin to play.
#To cancel music search and return to play-
back, press BAND.
#You can cancel music search by pressing c
or din the same direction again.
6 To change the direction of the tape
transport, press BAND.
Notes
!Do not insert anything other than a cassette
tape into the cassette loading slot.
!Play time indicator starts from 0000 in the
following cases:
When a tape is inserted
When the tape direction is changed
When you rewind the tape to the begin-
ning
!Play time indicator is halted when fast
forward, rewind or music search is
operating.
Cassette Player
06
En
20
Section