Pioneer Premier DEH-P760MP User manual

Operation Manual
Mode demploi
Multi-CD control High power CD/MP3/WMA player
with FM/AM tuner
Syntoniseur FM/AM et lecteur de CD/MP3/WMA,
Puissance éle ée, a ec contrôleur pour lecteur de
CD à chargeur
DEH-P760MP
English Français

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, put them away
in a safe place for future reference.
Before You Start
Information to User 6
For Canadian model 6
About this unit 6
About this manual 6
After-sales service for Pioneer products 6
Product registration 6
Precautions 7
Features 7
Use and care of the remote control 8
Installing the battery 8
Replacing the battery 8
Using the remote control 8
About MA 9
About the XM READY mark 9
Protecting your unit from theft 9
Removing the front panel 9
Attaching the front panel 10
About the demo mode 10
Reverse mode 10
Feature demo 10
About the operation mode 10
Whats What
Head unit 11
Remote control 12
Power ON/OFF
Turning the unit on 13
Selecting a source 13
Turning the unit off 13
Tuner
Listening to the radio 14
Introduction of advanced tuner
operation 15
Storing and recalling broadcast
frequencies 15
Tuning in strong signals 15
Storing the strongest broadcast
frequencies 16
Bu lt- n CD Player
Playing a CD 17
Introduction of advanced built-in CD player
operation 18
Repeating play 18
Playing tracks in a random order 18
Scanning tracks of a CD 18
Pausing CD playback 19
Using compression and BMX 19
Selecting the search method 19
Searching every 10 track in the current
disc 20
Using disc title functions 20
Entering disc titles 20
Displaying disc titles 21
Using CD TEXT functions 21
Displaying titles on CD TEXT
discs 21
Scrolling titles in the display 21
MP3/WMA/WAV Player
Playing MP3/ MA/ AV 22
Introduction of advanced built-in CD player
(MP3/ MA/ AV) operation 24
Repeating play 24
Playing tracks in a random order 24
Scanning folders and tracks 25
Pausing MP3/ MA/ AV playback 25
Using compression and BMX 25
Selecting folders from the folder title list 25
Selecting the search method 26
Searching every 10 track in the current
folder 26
Switching the tag display 26
Displaying text information on MP3/ MA/
AV disc 27
Contents
En
2

hen playing back an MP3/ MA
disc 27
hen playing back a AV disc 27
Scrolling text information in the display 27
Mult -CD Player
Playing a CD 28
50-disc multi-CD player 28
Introduction of advanced multi-CD player
operation 29
Repeating play 29
Playing tracks in a random order 29
Scanning CDs and tracks 30
Pausing CD playback 30
Using ITS playlists 30
Creating a playlist with ITS
programming 30
Playback from your ITS playlist 31
Erasing a track from your ITS
playlist 31
Erasing a CD from your ITS
playlist 31
Using disc title functions 32
Entering disc titles 32
Displaying disc titles 33
Selecting discs from the disc title
list 33
Using CD TEXT functions 33
Displaying titles on CD TEXT
discs 33
Scrolling titles in the display 33
Using compression and bass emphasis 34
Aud o Adjustments
Introduction of audio adjustments 35
Compensating for equalizer curves (EQ-
EX) 35
Setting the sound focus equalizer
(SFEQ) 35
Using balance adjustment 36
Using the equalizer 36
Recalling equalizer curves 36
Adjusting equalizer curves 37
Fine adjusting equalizer curve 37
Adjusting bass and treble 38
Adjusting bass and treble level 38
Selecting bass frequency 38
Selecting treble frequency 38
Adjusting loudness 39
Using subwoofer output 39
Adjusting subwoofer settings 39
Using non fading output 39
Adjusting non fading output level 40
Using the high pass filter 40
Adjusting source levels 40
Using automatic sound levelizer 41
In t al Sett ngs
Adjusting initial settings 42
Setting the clock 42
Switching the warning tone 42
Switching the auxiliary setting 42
Switching the dimmer setting 43
Adjusting the brightness 43
Setting the rear output and subwoofer
controller 43
Switching the telephone muting/
attenuation 44
Switching the Ever Scroll 44
Other Funct ons
Using the operation mode 2 45
Tuner 45
Built-in CD Player 45
MP3/ MA/ AV and Multi-CD
player 45
XM tuner 45
Television 46
En 3
English
Contents

DVD player and Multi-DVD player 46
AUX 46
Turning the clock display on or off 46
Using the AUX source 46
Selecting AUX as the source 46
Setting the AUX title 47
Using different entertainment displays 47
Introduction of XM operation 48
XM operation 48
Switching the XM display 48
Swiching the XM channel select
setting 48
Introduction of DVD operation 48
Operation 48
Function menu switching 49
Using ITS playlist and disc title
functions 49
Add t onal Informat on
Understanding built-in CD player error
messages 50
CD player and care 50
CD-R/CD-R discs 51
MP3, MA and AV files 51
MP3 additional information 52
MA additional information 52
AV additional information 52
About folders and MP3/ MA/ AV files 52
Terms 54
Specifications 56
Contents
En
4

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or distortion—and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against
this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
•Start your volume control at a low setting.
•Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
•Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After
all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged
ex
p
osure to excessive noise. This
l
ist of sound
l
eve
l
s is inc
l
uded for
y
our
p
rotection
.
D
ec
i
bel
Leve
l Exampl
e
30
Quiet
l
i
b
rar
y
, soft whis
p
er
s
4
0
L
ivin
g
room, refri
g
erator,
b
edroom awa
y
from traffi
c
50
L
i
g
ht traffic, norma
l
conversation,
q
uiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock at two feet
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers, thunderclap
140 Gunshot blast, jet plane
180 Rocket launching pad
Information courtesy of the Deafness Research Foundation.
En 5
English

Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the
users right to operate the equipment.
For Canadian model
This Class B digital apparatus complies with
Canadian ICES-003.
About this unit
The tuner frequencies on this unit are allo-
cated for use in North America. Use in other
areas may result in improper reception.
Important (Ser al number)
The serial number is located on the bottom of
this unit. For your own security and convenience,
be sure to record this number on the enclosed
warranty card.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this units potential
and to maximize your listening enjoyment.
e recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe precautions on the next
page and in other sections.
After-sales service for
Pioneer products
Please contact the dealer or distributor from
where you purchased this unit for after-sales
service (including warranty conditions) or any
other information. In case the necessary infor-
mation is not available, please contact the
companies listed below:
Please do not ship your unit to the companies
at the addresses listed below for repair without
advance contact.
U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R OP2
[phone]
1-877-283-5901
For warranty information please see the Lim-
ited arranty sheet included with this unit.
Product registration
Visit us at the following site:
1 Register your product. e will keep the details
of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.
Before You Start
En
6
Section
01

2 Receive updates on the latest products and
technologies.
3 Download owners manuals, order product
catalogues, research new products, and
much more.
Precautions
WARNING:
Handling the cord on this product or cords asso-
ciated with accessories sold with the product will
expose you to lead, a chemical known to the
State of California and other governmental enti-
ties to cause cancer and birth defects or other re-
productive harm. Wash hands after handling.
CA TION:
SE OF CONTROL OR ADJ STMENT OR
PERFORMANCE OF PROCED RES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RES LT IN HAZARDO S RADIATION
EXPOS RE.
CA TION:
THE SE OF OPTICAL INSTR MENTS
WITH THIS PROD CT WILL INCREASE
EYE HAZARD.
!Keep this manual handy as a reference for
operating procedures and precautions.
!Always keep the volume low enough so you
can hear sounds outside of the car.
!Protect this unit from moisture.
!If the battery is disconnected or dis-
charged, the preset memory will be erased
and must be reprogrammed.
!If this unit does not operate properly, con-
tact your dealer or nearest authorized Pio-
neer Service Station.
Features
CD playbac
Music CD/CD-R/CD-R playback is possible.
MP3 file playbac
You can play back MP3 files recorded on CD-
ROM/CD-R/CD-R (ISO9660 Level 1/Level 2
standard recordings).
!Supply of this product only conveys a li-
cense for private, non-commercial use and
does not convey a license nor imply any
right to use this product in any commercial
(i.e. revenue-generating) real time broad-
casting (terrestrial, satellite, cable and/or
any other media), broadcasting/streaming
via internet, intranets and/or other net-
works or in other electronic content distri-
bution systems, such as pay-audio or
audio-on-demand applications. An inde-
pendent license for such use is required.
For details, please visit
http://www.mp3licensing.com.
WMA file playbac
You can play back MA files recorded on CD-
ROM/CD-R/CD-R (ISO9660 Level 1/Level 2
standard recordings).
WAV file playbac
You can play back AV files recorded on CD-
ROM/CD-R/CD-R (Linear PCM (LPCM)/MS
ADPCM recordings).
Before You Start
En 7
English
Section
01

Use and care of the remote
control
Installing the battery
Remove the cover on the back of the steering
remote control and insert the battery with the
plus (+) and minus () poles pointing in the
proper direction.
Replacing the battery
Remove the battery.
WARNING
Keep the battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
CAUTION
!Use only one CR2032 (3 V) lithium battery.
!Remove the battery if the remote control is not
used for a month or longer.
!Do not recharge, disassemble, heat or dispose
of the battery in fire.
!Do not handle the battery with metallic tools.
!Do not store the battery with metallic materi-
als.
!In the event of battery leakage, wipe the re-
mote control completely clean and install a
new battery.
!hen disposing of used batteries, please
comply with governmental regulations or en-
vironmental public institutions rules that
apply in your country/area.
Using the remote control
Important
!Do not operate this unit while manipulating
the steering wheel as it might result in a traffic
accident.
!If you have to operate this unit unavoidably
when driving, look ahead carefully to avoid the
risk of being involved in a traffic accident.
!If any of the following troubles occur, immedi-
ately stop using this unit and consult with the
dealer from whom you purchased it:
the unit is smoking.
the unit is emitting abnormal odor.
a foreign object has entered the unit.
liquid has been spilled on or into the unit.
If you continue to use this unit without finding
a remedy, the unit may be damaged badly, re-
sulting in a serious accident or fire.
!Do not leave this unit free (unattached) inside
the car. hen the car stops or turns a curve,
the unit might drop on the floor. If the unit
rolls under the brake pedal, it might prevent
the driver from braking well, causing serious
trouble. Be sure to fix this unit to the steering
wheel.
!Do not disassemble or modify this unit. To do
so may cause a fault.
Before You Start
En
8
Section
01

About WMA
The indows Media"logo printed on the box
indicates that this unit can play back MA
data.
MA is short for indows Media Audio and
refers to an audio compression technology
that is developed by Microsoft Corporation.
MA data can be encoded by using indows
Media Player version 7 or later.
Microsoft, indows Media, and the indows
logo are trademarks, or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
Notes
!ith some applications used to encode MA
files, this unit may not operate correctly.
!ith some applications used to encode MA
files, album names and other text information
may not be correctly displayed.
About the XM READY mar
The XM READY mark printed on the front
panel indicates that the Pioneer XM tuner
(sold separately) can be controlled by this unit.
Please inquire to your dealer or nearest
authorized Pioneer service station regarding
the XM tuner that can be connected to this
unit. For XM tuner operation, please refer to
the XM tuner owners manual.
Notes
!XM Satellite Radio is developing a new band
of radio in the U.S.A.
The system will use direct satellite-to-receiver
broadcasting technology to provide listeners
in their cars and at home with crystal-clear
sound seamlessly from coast to coast. XM will
create and package up to 100 channels of di-
gital-quality music, news, sports, talk and chil-
drens programming.
!The XM name and related logos are trade-
marks of XM Satellite Radio Inc.
Protecting your unit from
theft
The front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
!If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound.
!You can turn off the warning tone. See
Switching the warning tone on page 42.
Important
!Never use force or grip the display and the
buttons tightly when removing or attaching.
!Avoid subjecting the front panel to excessive
shocks.
!Keep the front panel out of direct sunlight and
high temperatures.
Removing the front panel
1 Press OPEN to open the front panel.
Before You Start
En 9
English
Section
01

2 Grip the left side of the front panel and
pull it gently outward.
Take care not to grip it tightly or to drop it.
3 Put the front panel into the protective
case provided for safe keeping.
Attaching the front panel
%Replace the front panel by holding it
upright to this unit and clipping it securely
into the ounting hooks.
About the demo mode
This unit features two demonstration modes.
One is the reverse mode, the other is the fea-
ture demo mode.
!You cannot cancel a demo mode when the
front panel is open.
Important
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
Reverse mode
If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds. Pressing 5numbered button when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON cancels the re-
verse mode. Pressing 5numbered button
again to start the reverse mode.
Feature demo
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON. Pressing 6
numbered button during feature demo opera-
tion cancels the feature demo mode. Pressing
6numbered button again to start the feature
mode. Remember that if the feature demo
continues operating when the car engine is
turned off, it may drain battery power.
About the operation mode
This unit features two operation modes, opera-
tion mode 1 and 2. Operation mode 1 enables
you to operate all the functions of this unit.
Operation mode 2 enables you to operate the
basic functions for each source easily. This
manual explains operation mode 1. Please
refer to Using the operation mode 2 on page 45
for operation mode 2.
Before You Start
En
10
Section
01

Head unit
1CLOCK button
Press to change to the clock display.
2VOLUME
hen you press VOLUME, it extends out-
ward so that it becomes easier to turn. To re-
tract VOLUME, press it again. Rotate to
increase or decrease the volume.
3DISPLAY button
Press to select different displays.
4PAUSE button
Press to turn pause on or off.
5FUNCTION button
Press to select functions.
6AUDIO button
Press to select various sound quality con-
trols.
7a/b/c/dbuttons
Press to do manual seek tuning, fast for-
ward, reverse and track search controls.
Also used for controlling functions.
8OPEN button
Press to open the front panel.
9BAND button
Press to select among three FM and one
AM bands and cancel the control mode of
functions.
aENTERTAINMENT button
Press to change to the entertainment dis-
play.
bEQ-EX button
Press and hold to switch between EQ-EX
and SFEQ functions. Press to operate each
function.
c16 buttons
Press for preset tuning and disc number
search when using a multi-CD player.
dEQ button
Press to select various equalizer curves.
eSOURCE button
This unit is turned on by selecting a source.
Press to cycle through all of the available
sources.
34
2
1
5
6
7
8
ab
c
d
e
9
Whats What
En 11
English
Section
02

Remote control
Operation is the same as when using the but-
ton on the head unit. See the explanation of
the head unit about the operation of each but-
ton with the exception of ATT, which is ex-
plained below.
fATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
gVOLUME button
Press to increase or decrease the volume.
Note
If you press FUNCTION on the remote control
while pressing BAND on it, the remote control
will not function properly. To cancel this setting,
press AUDIO on the remote control while press-
ing BAND on it to return to the previous
setting.
g
f
6
5
5
5
e
9
9
9
7
7
7
Whats What
En
12
Section
02

Turning the unit on
%Press SOURCE to turn the unit on.
hen you select a source the unit is turned
on.
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in this unit (refer to page 17).
%Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
XM tunerTunerTelevisionDVD
player/Multi-DVD playerBuilt-in CD
playerMulti-CD playerExternal unit 1
External unit 2AUX
Notes
!In the following cases, the sound source will
not change:
hen a unit corresponding to each source
is not connected to this unit.
hen no disc is set in this unit.
hen no disc is set in the DVD player.
hen no magazine is set in the multi-CD
player.
hen no magazine is set in the multi-DVD
player.
hen the AUX (auxiliary input) is set to off
(refer to page 42).
!External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. hen two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
!hen this units blue/white lead is connected
to the cars auto-antenna relay control term-
inal, the cars antenna extends when this
units source is turned on. To retract the an-
tenna, turn the source off.
Turning the unit off
%Press SOURCE and hold until the unit
turns off.
Power ON/OFF
En 13
English
Section
03

Listening to the radio
1
2
3
4
5
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1Stereo (ST) indicator
Shows that the frequency selected is being
broadcast in stereo.
2LOC indicator
Shows when local seek tuning is on.
3Band indicator
Shows which band the radio is tuned to, AM
or FM.
4Preset nu ber indicator
Shows what preset has been selected.
5Frequency indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, FM1,FM2,FM3 for FM or AM.
4 To perfor anual tuning, press cor
dwith quick presses.
The frequencies move up or down step by
step.
5 To perfor seek tuning, press and hold
cor dfor about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by pressing either
cor dwith a quick press.
#If you press and hold cor dyou can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Tuner
En
14
Section
04

Introduction of advanced
tuner operation
1
1Function display
Shows the function status.
%Press FUNCTION to display the function
na es.
Press FUNCTION repeatedly to switch be-
tween the following functions:
BSM (best stations memory)Local (local
seek tuning)
#To return to the frequency display, press
BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.
Storing and recalling
broadcast frequencies
If you press any of the preset tuning buttons
16you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
%When you find a frequency that you
want to store in e ory press a preset
tuning button 16 and hold until the preset
nu ber stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button 16the radio station frequency is
recalled from memory.
Notes
!Up to 18 FM stations, 6 for each of the three
FM bands, and 6 AM stations can be stored in
memory.
!You can also use aand bto recall radio sta-
tion frequencies assigned to preset tuning
buttons 16.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Press FUNCTION to select Local.
Press FUNCTION until Local appears in the
display.
2 Press ato turn local seek tuning on.
Local seek sensitivity (e.g., Local 2) appears in
the display.
3 Press cor dto set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: Local 1Local 2Local 3Local 4
AM: Local 1Local 2
The Local 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
4 When you want to return to nor al
seek tuning, press bto turn local seek tun-
ing off.
Local :OFF appears in the display.
Tuner
En 15
English
Section
04

Storing the strongest
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 16and
once stored there you can tune in to those fre-
quencies with the touch of a button.
1 Press FUNCTION to select BSM.
Press FUNCTION until BSM appears in the
display.
2 Press ato turn BSM on.
BSM begins to flash. hile BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning buttons 16in
order of their signal strength. hen finished,
BSM stops flashing.
#To cancel the storage process, press b.
Note
Storing broadcast frequencies with BSM may re-
place broadcast frequencies you have saved
using 16.
Tuner
En
16
Section
04

Playing a CD
1
2
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1Track nu ber indicator
Shows the track currently playing.
2Play ti e indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press OPEN to open the front panel.
CD loading slot appears.
#After a CD has been inserted, press SOURCE
to select the built-in CD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
EJECT button
#You can eject a CD by pressing EJECT.
#To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
3 Close the front panel.
4 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 To perfor fast forward or reverse,
press and hold cor d.
#If you select the search method to
ROUGH SEARCH, pressing and holding cor d
enables you to search every ten track in the cur-
rent disc. (Refer to Selecting the search method
on page 19.)
6 To skip back or forward to another
track, press cor d.
Pressing dskips to the start of the next track.
Pressing conce skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
!Do not insert anything other than a CD into
the CD loading slot.
!If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting the disc
again.
!If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page 50.
!hen a CD TEXT disc is inserted, the disc and
track titles automatically begin to scroll in the
display. hen Ever Scroll is set to ON at the
initial setting, the disc and track titles scroll
continuously. About Ever Scroll, refer to
Switching the Ever Scroll on page 44.
Built-in CD Player
En 17
English
Section
05

Introduction of advanced
built-in CD player operation
1
1Function display
Shows the function status.
%Press FUNCTION to display the function
na es.
Press FUNCTION repeatedly to switch be-
tween the following functions:
Repeat (repeat play)Rando (random play)
Scan (scan play)Pause (pause)
Co p./BMX (compression and BMX)
FF/REV (search method)Tag Read (tag
display)
#To return to the playback display, press BAND.
Notes
!hen playing audio data (CD-DA), it is not ef-
fective even if you turn Tag Read (tag display)
on. (Refer to page 26.)
!If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select Repeat.
Press FUNCTION until Repeat appears in the
display.
2 Press ato turn repeat play on.
Repeat :ON appears in the display. The track
currently playing will play and then repeat.
3 Press bto turn repeat play off.
Repeat :OFF appears in the display. The track
currently playing will continue to play and
then play the next track.
Note
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing trac s in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select Rando .
Press FUNCTION until Rando appears in
the display.
2 Press ato turn rando play on.
Rando :ON appears in the display. Tracks
will play in a random order.
3 Press bto turn rando play off.
Rando :OFF appears in the display. Tracks
will continue to play in order.
Scanning trac s of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select Scan.
Press FUNCTION until Scan appears in the
display.
Built-in CD Player
En
18
Section
05

2 Press ato turn scan play on.
Scan :ON appears in the display. The first 10
seconds of each track is played.
3 When you find the desired track press
bto turn scan play off.
Scan :OFF appears in the display. The track
will continue to play.
#If the display has automatically returned to
the playback display, select Scan again by press-
ing FUNCTION.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.
Pausing CD playbac
Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the
display.
2 Press ato turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
3 Press bto turn pause off.
Pause :OFF appears in the display. Play will re-
sume at the same point that you turned pause
on.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of the CD player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Press FUNCTION to select Co p.
Press FUNCTION until Co p. appears in the
display.
2 Press aor bto select your favorite set-
ting.
Press aor brepeatedly to switch between the
following settings:
Co p./BMX OFFCo p. 1Co p. 2
Co p./BMX OFFBMX 1BMX 2
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
track.
1 Press FUNCTION to select FF/REV.
Press FUNCTION until FF/REV appears in the
display.
#If the search method ROUGH SEARCH has
been previously selected, ROUGH SEARCH will
be displayed.
2 Press cor dto select the search eth-
od.
Press cor duntil the desired search method
appears in the display.
!FF/REV Fast forward and reverse
!ROUGH SEARCH Searching every 10
track
Built-in CD Player
En 19
English
Section
05

Searching every 10 trac in
the current disc
If a disc contains over 10 tracks, you can
search every 10 track. hen a disc contains a
lot of tracks, you can roughly search the track
you want to play.
1 Select the search ethod
ROUGH SEARCH.
Refer to Selecting the search method on the
previous page.
2 Press and hold cor dto search every
10 track in a disc.
#If a disc contains less than 10 tracks, pressing
and holding drecalls the last track of a disc.
Also, if the remaining number of tracks after
searching every 10 tracks are less than 10, press-
ing and holding drecalls the last track of a disc.
#If a disc contains less than 10 tracks, pressing
and holding crecalls the first track of a disc.
Also, if the remaining number of tracks after
searching every 10 tracks are less than 10, press-
ing and holding crecalls the first track of a
disc.
Using disc title functions
You can input CD titles and display the title.
The next time you insert a CD for which you
have entered a title, the title of that CD will be
displayed.
Entering disc titles
Disc title input lets you input CD titles up to 10
letters long and up to 48 disc titles into this
unit.
1 Play a CD that you want to enter the
title.
2 Press FUNCTION and hold until TITLE
appears in the display.
#hen playing a CD TEXT disc, you cannot
switch to TITLE. The disc title will have already
been recorded on a CD TEXT disc.
3 Press 1 nu bered button to select the
desired character type.
Press 1numbered button repeatedly to switch
between the following character type:
Alphabet (upper case), numbers and symbols
Alphabet (lower case)European letters,
such as those with accents (e.g. á, à, ä, ç)
#You can select to input numbers and symbols
by pressing 2numbered button.
4 Press aor bto select a letter of the al-
phabet.
Each press of awill display a letter of the al-
phabet in A B C ... X Y Z, numbers and sym-
bols in 1 2 3 ... @ # < order. Each press of b
will display a letter in the reverse order, such
as Z Y X ... C B A order.
5 Press dto ove the cursor to the next
character position.
hen the letter you want is displayed, press d
to move the cursor to the next position and
then select the next letter. Press cto move
backwards in the display.
6 Move the cursor to the last position by
pressing dafter entering the title.
hen you press done more time, the entered
title is stored in memory.
7 Press BAND to return to the playback
display.
Built-in CD Player
En
20
Section
05