Pioneer Super Tuner III D DEH-3770MP User manual

Operation Manual
High power CD/MP3/WMA player with FM/AM tuner
DEH-3770MP
English
Português (B)
Español
All manuals and user guides at all-guides.com
all-guides.com

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, keep this man-
ual in a safe place for future reference.
Before You Start
About this unit 3
Features 3
About WMA 3
Use and care of the remote control 4
Installing the battery 4
Using the remote control 4
Protecting your unit from theft 4
Removing the front panel 5
Attaching the front panel 5
Whats What
ead unit 6
Remote control 7
Power ON/OFF
Turning the unit on and selecting a
source 8
Turning the unit off 8
Tuner
Listening to the radio 9
Storing and recalling broadcast
frequencies 9
Tuning in strong signals 9
Storing the strongest broadcast
frequencies 10
Bui t-in CD P ayer
Playing a CD 11
Repeating play 11
Playing tracks in a random order 11
Scanning tracks of a CD 11
Pausing CD playback 12
Selecting the search method 12
Searching every 10 tracks in the current
disc 12
Using compression and BMX 12
Using CD TEXT functions 13
MP3/WMA/WAV P ayer
Playing MP3/WMA/WAV 14
Repeating play 15
Playing tracks in a random order 15
Scanning folders and tracks 15
Pausing MP3/WMA/WAV playback 16
Selecting the search method 16
Searching every 10 tracks in the current
folder 16
Using compression and BMX 16
Displaying text information on MP3/WMA
disc 16
Displaying text information on WAV disc 17
Audio Adjustments
Introduction of audio adjustments 18
Using balance adjustment 18
Using the equalizer 18
Recalling equalizer curves 18
Adjusting equalizer curves 19
Fine-adjusting equalizer curve 19
Adjusting loudness 19
Front image enhancer (F.I.E.) 20
Adjusting source levels 20
Initia Settings
Adjusting initial settings 21
Setting the clock 21
Turning the clock display on or off 21
Setting the FM tuning step 21
Additiona Information
Understanding built-in CD player error
messages 22
CD player and care 22
CD-R/CD-RW discs 22
MP3, WMA and WAV files 23
MP3 additional information 24
WMA additional information 24
WAV additional information 24
About folders and MP3/WMA/WAV files 24
Terms 26
Specifications 28
Contents
En
2
All manuals and user guides at all-guides.com

About this unit
The tuner frequencies on this unit are allo-
cated for use in Central or South America. Use
in other areas may result in poor reception.
CAU ION:
USE OF CON ROL OR ADJUS MEN OR
PERFORMANCE OF PROCEDURES
O HER HAN HOSE SPECIFIED HEREIN
MAY RESUL IN HAZARDOUS RADIA ION
EXPOSURE.
CAU ION:
HE USE OF OP ICAL INS RUMEN S
WI H HIS PRODUC WILL INCREASE
EYE HAZARD.
CAUTION
!Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat
could result from contact with liquids.
!Keep this manual handy as a reference for op-
erating procedures and precautions.
!Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
!Protect this unit from moisture.
!If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
!If this unit does not operate properly, contact
your dealer or nearest authorized Pioneer Ser-
vice Station.
Features
CD playback
Music CD/CD-R/CD-RW playback is possible.
MP3 file playback
You can play back MP3 files recorded on CD-
ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
!Supply of this product only conveys a li-
cense for private, non-commercial use and
does not convey a license nor imply any
right to use this product in any commercial
(i.e. revenue-generating) real time broad-
casting (terrestrial, satellite, cable and/or
any other media), broadcasting/streaming
via internet, intranets and/or other net-
works or in other electronic content distri-
bution systems, such as pay-audio or
audio-on-demand applications. An inde-
pendent license for such use is required.
For details, please visit
http://www.mp3licensing.com.
WMA file playback
You can play back WMA files recorded on CD-
ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
WAV file playback
You can play back WAV files recorded on CD-
ROM/CD-R/CD-RW (Linear PCM (LPCM)/MS
ADPCM recordings).
About WMA
The Windows Media"logo printed on the box
indicates that this unit can play back WMA
data.
Before You Start
En 3
English
Section
01
All manuals and user guides at all-guides.com

WMA is short for Windows Media Audio and
refers to an audio compression technology
that is developed by Microsoft Corporation.
WMA data can be encoded by using Windows
Media Player version 7 or later.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
Notes
!With some applications used to encode WMA
files, this unit may not operate correctly.
!With some applications used to encode WMA
files, album names and other text information
may not be correctly displayed.
Use and care of the re ote
control
Installing the battery
Slide the tray out on the back of the remote
control and insert the battery with the plus (+)
and minus () poles pointing in the proper di-
rection.
WARNING
Keep the battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
CAUTION
!Use only one CR2025 (3 V) lithium battery.
!Remove the battery if the remote control is not
used for a month or longer.
!Do not recharge, disassemble, heat or dispose
of the battery in fire.
!Do not handle the battery with metallic tools.
!Do not store the battery with metallic materi-
als.
!In the event of battery leakage, wipe the re-
mote control completely clean and install a
new battery.
!When disposing of used batteries, please
comply with governmental regulations or en-
vironmental public institutionsrules that
apply in your country/area.
Using the re ote control
Point the remote control in the direction of the
front panel to operate.
Important
!Do not store the remote control in high tem-
peratures or direct sunlight.
!The remote control may not function properly
in direct sunlight.
!Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
Protecting your unit fro
theft
The front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
Important
!Never use force or grip the display and the
buttons too tightly when removing or attach-
ing.
Before You Start
En
4
Section
01
All manuals and user guides at all-guides.com

!Avoid subjecting the front panel to excessive
shocks.
!Keep the front panel out of direct sunlight and
high temperatures.
Re oving the front panel
1 Press DETACH to release the front
panel.
Press DETACH and the right side of the panel
is released from the head unit.
2 Grab the front panel and remove.
Grab the right side of the front panel and pull
away to the left. The front panel will be de-
tached from the head unit.
3 Put the front panel into the protective
case provided for safe keepin .
Attaching the front panel
1 Place the front panel flat a ainst the
head unit.
2 Press the front panel into the face of
the head unit until it is firmly seated.
Before You Start
En 5
English
Section
01
All manuals and user guides at all-guides.com

Head unit
1CLOCK button
Press to change to the clock display.
2Disc loadin slot
Insert a disc to play.
3EJECT button
Press to eject a CD from your built-in CD
player.
4AUDIO button
Press to select various sound quality con-
trols.
5DISPLAY button
Press to select different displays.
6a/b/c/dbuttons
Press to do manual seek tuning, fast for-
ward, reverse and track search controls.
Also used for controlling functions.
7LOUDNESS button
Press to turn loudness on or off.
8DETACH button
Press to remove the front panel from the
head unit.
9BAND button
Press to select among three FM bands and
one AM band and to cancel the control
mode of functions.
aLOCAL/BSM button
Press to turn local function on or off.
Press and hold to turn BSM function on or
off.
b16 buttons
Press for preset tuning.
cSOURCE button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
dVOLUME
Rotate it to increase or decrease the vo-
lume.
eEQ button
Press to select various equalizer curves.
1
1
1
3
8
8
8
9
9
9
a
a
a
b
b
b
c
c
c
4
6
6
2
5
5
5
7
7
7
d
d
d
e
e
e
Whats What
En
6
Section
02
All manuals and user guides at all-guides.com
all-guides.com

Re ote control
Operation is the same as when using the but-
tons on the head unit. See the explanation of
the head unit about the operation of each but-
ton with the exception of ATT, which is ex-
plained below.
fVOLUME button
Press to increase or decrease the volume.
gATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
hTUNER button
Press to select the tuner as the source.
iPAUSE button
Press to turn pause on or off.
jCD button
Press to select the built-in CD player as the
source.
kFUNCTION button
Not used.
g
6
4
j
k
f
i
h
9
Whats What
En 7
English
Section
02
All manuals and user guides at all-guides.com

Turning the unit on and
selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 11).
%When usin the head unit, press
SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Bui t-in CD p ayerTuner
When you select a source the unit is turned
on.
%When usin the remote control, press
TUNER or CD to select a source.
Press each button repeatedly to switch be-
tween the following sources:
TUNER:TunerSources off
CD:Bui t-in CD p ayerSources off
Notes
!When no disc has been set in the unit, the
source will not switch to the built-in CD player.
!When this units blue/white lead is connected
to the vehicles auto-antenna relay control
terminal, the vehicles antenna extends when
this units source is turned on. To retract the
antenna, turn the source off.
Turning the unit off
%Press SOURCE and hold until the unit
turns off.
Power ON/OFF
En
8
Section
03
All manuals and user guides at all-guides.com

Listening to the radio
1 2 4 53
1Band indicator
Shows which band the radio is tuned to, AM
or FM.
2Frequency indicator
Shows to which frequency the tuner is
tuned.
3LOC indicator
Shows when local seek tuning is on.
4Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
5Preset number indicator
Shows which preset has been selected.
1 Press SOURCE to select the tuner.
2 Use VOLUME to adjust the sound level.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1,F2,F3 for FM or AM.
4 To perform manual tunin , briefly press
cor d.
5 To perform seek tunin , press and hold
cor dfor about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by briefly pressing
either cor d.
#If you press and hold cor dyou can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Storing and recalling
broadcast frequencies
If you press any of the preset tuning buttons
16you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
%When you find a frequency that you
want to store in memory press one of pre-
set tunin buttons 16 and hold until the
preset number stops flashin .
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
Notes
!Up to 18 FM stations, six for each of the three
FM bands, and six AM stations can be stored
in memory.
!You can also use aand bto recall radio sta-
tion frequencies assigned to preset tuning
buttons 16.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
Tuner
En 9
English
Section
04
All manuals and user guides at all-guides.com

%Press LOCAL/BSM repeatedly to turn
local seek tunin on or off.
When local seek tuning is on, LOC appears in
the display.
Storing the strongest
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 16and
once stored there you can tune in to those fre-
quencies with the touch of a button.
!Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons 16.
%Press LOCAL/BSM and hold until the
BSM turns on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning buttons 16in the
order of their signal strength. When finished,
BSM stops flashing.
#To cancel the storage process, press
LOCAL/BSM.
Tuner
En
10
Section
04
All manuals and user guides at all-guides.com

Playing a CD
321
1RPT indicator
Shows when repeat play is turned on.
2Play time indicator
Shows the elapsed playing time of the cur-
rent track.
3Track number indicator
Shows the track currently playing.
1 Insert a CD into the CD loadin slot.
Playback will automatically start.
#Be sure to turn up the abe side of a disc.
#After a CD has been inserted, press SOURCE
to select the built-in CD player.
#You can eject a CD by pressing EJECT.
2 Use VOLUME to adjust the sound level.
3 To perform fast forward or reverse,
press and hold cor d.
#If you select ROUGH, pressing and holding c
or denables you to search every 10 tracks in the
current disc. (Refer to Selecting the search meth-
od on the next page.)
4 To skip back or forward to another
track, press cor d.
Pressing dskips to the start of the next track.
Pressing conce skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
!Do not insert anything other than a CD into
the CD loading slot.
!If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 22.
Repeating play
Repeat play lets you hear the same track over
again.
%Press 5 repeatedly to turn repeat play
on or off.
When repeat play is on, RPT appears in the
display.
#If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing tracks in a rando
order
Random play lets you play back tracks on the
CD in a random order.
%Press 4 repeatedly to turn random play
on or off.
When random play is on, RDM appears in the
display.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
Built-in CD Player
En 11
English
Section
05
All manuals and user guides at all-guides.com
all-guides.com

1 Press 3 to turn scan play on.
SCAN appears in the display. The first 10 sec-
onds of each track is played.
2 When you find the desired track press 3
to turn scan play off.
#After scanning of a CD is finished, normal
playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
%Press 6 repeatedly to turn pause on or
off.
When pause is on, PAUSE appears in the dis-
play.
#You can also turn pause on or off by pressing
PAUSE.
Selecting the search ethod
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
%Press 2 to select the search method.
Press 2until the desired search method ap-
pears in the display.
!FF/REV Fast forward and reverse
!ROUGH Searching every 10 tracks
Searching every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
a lot of tracks, you can roughly search for the
track you want to play.
1 Select the search method ROUGH.
Refer to Selecting the search method on this
page.
2 Press and hold cor dto search every
10 tracks on a disc.
#If a disc contains less than 10 tracks, pressing
and holding drecalls the last track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding drecalls the last track of the
disc.
#If a disc contains less than 10 tracks, pressing
and holding crecalls the first track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding crecalls the first track of the
disc.
Using co pression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
%Press 1 to select your favorite settin .
Press 1repeatedly to switch between the fol-
lowing settings:
COMP OFFCOMP 1COMP 2
COMP OFFBMX 1BMX 2
Built-in CD Player
En
12
Section
05
All manuals and user guides at all-guides.com

Using CD TEXT functions
Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artists name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the
functions listed below.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play timeDISC TTL (disc title)ART NAME
(disc artist name)TRK TTL (track title)
ART NAME (track artist name)
#If specific information has not been recorded
on a CD TEXT disc, NO XXXX will be displayed
(e.g., NO T-TTL).
Note
You can scroll to the left the title by pressing and
holding DISPLAY.
Built-in CD Player
En 13
English
Section
05
All manuals and user guides at all-guides.com

Playing MP3/WMA/WAV
651 2 3 4
1Folder number indicator
Shows the number of folder currently play-
ing.
2MP3 indicator
Shows when the MP3 file is playing.
3WMA indicator
Shows when the WMA file is playing.
4RPT indicator
Shows when repeat play is turned on.
5Play time indicator
Shows the elapsed playing time of the cur-
rent track (file).
6Track number indicator
Shows the track (file) currently playing.
!If a track number 100 to 199 is selected,
don the left of the track number indica-
tor will light.
!If a track number 200 or more is selected,
don the left of the track number indica-
tor will blink.
1 Insert a CD-ROM into the CD loadin
slot.
Playback will automatically start.
#Be sure to turn up the abe side of a disc.
#After a CD-ROM has been inserted, press
SOURCE to select the built-in CD player.
#You can eject a CD-ROM by pressing EJECT.
2 Use VOLUME to adjust the sound level.
3 Press aor bto select a folder.
#You cannot select a folder that does not have
an MP3/WMA/WAV file recorded in it.
#To return to folder 01 (ROOT), press and hold
BAND. owever, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
4 To perform fast forward or reverse,
press and hold cor d.
#This is fast forward and reverse operation only
for the file being played. This operation is can-
celed when the previous or next file is reached.
#If you select ROUGH, pressing and holding c
or denables you to search every 10 tracks in the
current folder. (Refer to Selecting the search meth-
od on page 16.)
5 To skip back or forward to another
track, press cor d.
Pressing dskips to the start of the next track.
Pressing conce skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!When playing discs with MP3/WMA/WAV files
and audio data (CD-DA) such as CD-EXTRA
and MIXED-MODE CDs, both types can be
played only by switching mode between MP3/
WMA/WAV and CD-DA with BAND.
!If you have switched between playback of
MP3/WMA/WAV files and audio data (CD-DA),
playback starts at the first track on the disc.
!The built-in CD player can play back an MP3/
WMA/WAV file recorded on CD-ROM. (Refer
to page 23 for files that can be played back.)
!Do not insert anything other than a CD into
the CD loading slot.
!There is sometimes a delay between starting
up CD playback and the sound being issued.
When being read in, FRMTREAD is displayed.
MP3/WMA/WAV Player
En
14
Section
06
All manuals and user guides at all-guides.com

!Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
!When playing back files recorded as VBR
(variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
!If the inserted disc contains no files that can
be played back, NO AUDIO is displayed.
!If the inserted disc contains WMA files that
are protected by digital rights management
(DRM) , SKIPPED is displayed while the pro-
tected file is skipped.
!If all the files on the inserted disc are secured
by DRM, PROTECT is displayed.
!There is no sound on fast forward or reverse.
!If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 22.
Repeating play
For MP3/WMA/WAV playback, there are three
repeat play ranges: FRPT (folder repeat), RPT
(one-track repeat) and disc repeat.
%Press 5 to select the repeat ran e.
Press 5until the desired repeat range appears
in the display.
!RPT Repeat just the current track
!FRPT Repeat the current folder
!Play time (e.g., 0123)Repeat all tracks
Notes
!If you select another folder during repeat play,
the repeat play range changes to disc repeat.
!If you perform track search or fast forward/re-
verse during RPT, the repeat play range
changes to FRPT.
!When FRPT is selected, it is not possible to
play back a subfolder of that folder.
Playing tracks in a rando
order
Random play lets you play back tracks in a
random order within the repeat range, FRPT
(folder repeat) and disc repeat.
1 Select the repeat ran e.
Refer to Repeating play on this page.
2 Press 4 repeatedly to turn random play
on or off.
When random play is on, RDM appears in the
display.
#If you turn random play on during FRPT,
FRDM appears in the display.
Scanning folders and tracks
While you are using FRPT (folder repeat), the
beginning of each track in the selected folder
plays for about 10 seconds. When you are
using disc repeat, the beginning of the first
track of each folder is played for about 10 sec-
onds.
1 Select the repeat ran e.
Refer to Repeating play on this page.
2 Press 3 to turn scan play on.
SCAN appears in the display. The first 10 sec-
onds of each track of the current folder (or the
first track of each folder) is played.
#If you turn scan play on during FRPT,FSCN
appears in the display.
3 When you find the desired track (or
folder) press 3 to turn scan play off.
#After track or folder scanning is finished, nor-
mal playback of the tracks will begin again.
MP3/WMA/WAV Player
En 15
English
Section
06
All manuals and user guides at all-guides.com

Pausing MP3/WMA/WAV
playback
Pause lets you temporarily stop playback of
the MP3/WMA/WAV.
%Press 6 repeatedly to turn pause on or
off.
When pause is on, PAUSE appears in the dis-
play.
#You can also turn pause on or off by pressing
PAUSE.
Selecting the search ethod
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
%Press 2 to select the search method.
Press 2until the desired search method ap-
pears in the display.
!FF/REV Fast forward and reverse
!ROUGH Searching every 10 tracks
Searching every 10 tracks in
the current folder
If the current folder contains over 10 tracks,
you can search every 10 tracks. When one
folder contains a lot of tracks, you can roughly
search for the track you want to play.
1 Select the search method ROUGH.
Refer to Selecting the search method on this
page.
2 Press and hold cor dto search every
10 tracks in the current folder.
#If the current folder contains less than 10
tracks, pressing and holding drecalls the last
track of the folder. Also, if the remaining number
of tracks after searching every 10 tracks is less
than 10, pressing and holding drecalls the last
track of the folder.
#If the current folder contains less than 10
tracks, pressing and holding crecalls the first
track of the folder. Also, if the remaining number
of tracks after searching every 10 tracks is less
than 10, pressing and holding crecalls the first
track of the folder.
Using co pression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
%Press 1 to select your favorite settin .
Press 1repeatedly to switch between the fol-
lowing settings:
COMP OFFCOMP 1COMP 2
COMP OFFBMX 1BMX 2
Displaying text infor ation
on MP3/WMA disc
Text information recorded on a MP3/WMA
disc can be displayed.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
MP3/WMA/WAV Player
En
16
Section
06
All manuals and user guides at all-guides.com
all-guides.com

Play timeFOLDER (folder name)FILE (file
name)TRK TTL (track title)ART NAME (ar-
tist name)ALBM TTL (album title)
COMMENT (comment)Bit rate
#When playing back MP3 files recorded as VBR
(variable bit rate) files, the bit rate value is not dis-
played even after switching to bit rate. (VBR will
be displayed.)
#When playing back WMA files recorded as
VBR (variable bit rate) files, the average bit rate
value is displayed.
#If specific information has not been recorded
on an MP3/WMA disc, NO XXXX will be dis-
played (e.g., NO NAME).
#With some applications used to encode WMA
files, album names and other text information
may not be correctly displayed.
Note
You can scroll to the left the text information by
pressing and holding DISPLAY.
Displaying text
infor ation on WAV disc
You can display text information recorded on a
WAV disc.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play timeFOLDER (folder name)FILE (file
name)Sampling frequency
#You can only play back WAV files in the fre-
quencies 16, 22.05, 24, 32, 44.1 and 48 k z
(LPCM), or 22.05 and 44.1 k z (MS ADPCM). The
sampling frequency shown in the display may be
rounded.
Note
You can scroll to the left the text information by
pressing and holding DISPLAY.
MP3/WMA/WAV Player
En 17
English
Section
06
All manuals and user guides at all-guides.com

Introduction of audio
adjust ents
1 2 43
1CUSTOM indicator
Shows when custom equalizer curve is cur-
rently selected.
2Audio display
Shows the audio adjustments status.
3FIE indicator
Shows when the front image enhancer is
turned on.
4LOUD indicator
Appears in the display when loudness is
turned on.
%Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)EQ (equalizer)
LOUD (loudness)FIE (front image enhan-
cer)SLA (source level adjustment)
#When selecting the FM tuner as the source,
you cannot switch to SLA.
#If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
#To return to the display of each source, press
BAND.
Using balance adjust ent
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
#If the balance setting has been previously ad-
justed, BAL will be displayed.
2 Press aor bto adjust front/rear speak-
er balance.
FAD F15 FAD R15 is displayed as the front/
rear speaker balance moves from front to rear.
#FAD 0 is the proper setting when only two
speakers are used.
3 Press cor dto adjust left/ri ht speaker
balance.
BAL L9 BAL R9 is displayed as the left/right
speaker balance moves from left to right.
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. ere is a list
of the equalizer curves:
Disp ay Equa izer curve
SPR-BASS Super bass
POWERFUL Powerful
NATURAL Natural
VOCAL Vocal
CUSTOM Custom
EQ FLAT Flat
Audio Adjust ents
En
18
Section
07
All manuals and user guides at all-guides.com

!CUSTOM is an adjusted equalizer curve
that you create.
!When EQ FLAT is selected no supplement
or correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
EQ FLAT and a set equalizer curve.
%Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizers:
SPR-BASSPOWERFULNATURAL
VOCALCUSTOMEQ FLAT
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM.
!If you make adjustments when a curve
other than CUSTOM is selected, the newly
adjusted curve will replace the previous
curve. Then a new curve with CUSTOM ap-
pears on the display while selecting the
equalizer curve.
1 Press AUDIO to select EQ.
2 Press cor dto select the equalizer
band to adjust.
EQ-L (low)EQ-M (mid)EQ-H (high)
3 Press aor bto adjust the level of the
equalizer band.
+6 6is displayed as the level is increased
or decreased.
#You can then select another band and adjust
the level.
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (EQ-L/EQ-M/EQ-H).
Level (dB)
Center frequency
Q=2N Q=2W
Frequency (Hz)
!If you make adjustments when a curve
other than CUSTOM is selected, the newly
adjusted curve will replace the previous
curve. Then a new curve with CUSTOM ap-
pears on the display while selecting the
equalizer curve.
1 Press AUDIO and hold until frequency
and the Q factor (e. ., F- 80 Q 1W) appears
in the display.
2 Press AUDIO to select the desired band
for adjustment.
LowMidigh
3 Press cor dto select the desired fre-
quency.
Low: 4080100160 ( z)
Mid: 2005001k2k ( z)
igh: 3k8k10k12k ( z)
4 Press aor bto select the desired Q fac-
tor.
2N1N1W2W
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select LOUD.
Audio Adjust ents
En 19
English
Section
07
All manuals and user guides at all-guides.com

2 Press ato turn loudness on.
LOUD indicator is displayed.
#To turn loudness off, press b.
#You can also turn loudness on or off by press-
ing LOUDNESS.
3 Press cor dto select a desired level.
LOW (low)MID (mid)HI (high)
Front i age enhancer (F.I.E.)
The F.I.E. (Front Image Enhancer) function is a
simple method of enhancing front imaging by
cutting mid- and high-range frequency output
from the rear speakers, limiting their output to
low-range frequencies. You can select the fre-
quency you want to cut.
Precaution
When the F.I.E. function is deactivated, the rear
speakers output sound of all frequencies, not just
bass sounds. Reduce the volume before disenga-
ging F.I.E. to prevent a sudden increase in vo-
lume.
1 Press AUDIO to select FIE.
2 Press ato turn F.I.E. on.
#To turn F.I.E. off, press b.
3 Press cor dto select a desired fre-
quency.
100160250 ( z)
Notes
!After turning the F.I.E. function on, use the bal-
ance adjustment (refer to page 18) and adjust
front and rear speaker volume levels until they
are balanced.
!Turn the F.I.E. function off when using a 2-
speaker system.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!Settings are based on the FM tuner volume
level, which remains unchanged.
!The AM tuner volume level can also be ad-
justed with source level adjustments.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO to select SLA.
3 Press aor bto adjust the source vo-
lume.
SLA +4 SLA 4is displayed as the source vo-
lume is increased or decreased.
Audio Adjust ents
En
20
Section
07
All manuals and user guides at all-guides.com