Pioneer CarisTouch CT15M User manual

Front View
CarisTouch CT15MQuick Start Guide I/O info Part Number: QXX-MXXXXX-XX
Back View
Bottom View
Webcam (Optional)
Sim Card Slot (Optional)
DC Power USB 3.0
COM Ports
2 1 Powered USB 12V 24V
Power Switch
External Battery (Optional)
SSD / Hard Drive Bay
VESA 100 threaded mounting holes
Mic-In (Optional)
Audio-out (Optional) VGA LAN
LAN
2x USB 2.0
I/O info Part Number: QXX-YXXXXX-XX
Sim Card Slot (Optional)
DC Power COM Ports
3 2 1Powered USB 12V 24V
Mic-In (Optional)
Audio-out (Optional)
HDMI
4X USB 3.0
Setup Information:
Plug the power cord into the DC Power port before turning on the unit via the power switch.
For units with the optional battery installed:
1. Make sure the battery is fully charged before turning the unit on for the first time. Batteries can be
charged on a CT15M connected to a DC power source or via the mBAY Charging Station.
2. The CT15M will make a beeping noise once the external battery reaches low levels and will continue
to beep until the battery is replaced.
3. Replace the external battery with a fully charged battery as soon as possible for uninterrupted usage.
4HW-CBA03:
mBAY 4 battery charging station, white
Optional Accessories
See Page 2 for I/O info
Power Switch
Built-in Speaker(Optional)
MF-PUB-007 (ver. A6)
4HB-BAT01:
External Battery
(5200 mAh)
4HG-BAT02:
External Battery
(13400 mAh)
For product support:
US & Canada: [e-mail],
or call 909-468-9757, option 2
Others: [e-mail]

Front View
CarisTouch CT15MQuick Start Guide I/O info Part Number: QXX-MXXXXX-XX
Back View
Bottom View
Webcam (Optional)
Sim Card Slot (Optional)
DC Power USB 3.0
COM Ports
2 1 Powered USB 12V 24V
Power Switch
External Battery (Optional)
SSD / Hard Drive Bay
VESA 100 threaded mounting holes
Mic-In (Optional)
Audio-out (Optional) VGA LAN
LAN
2x USB 2.0
I/O info Part Number: QXX-YXXXXX-XX
Sim Card Slot (Optional)
DC Power COM Ports
3 2 1Powered USB 12V 24V
Mic-In (Optional)
Audio-out (Optional)
HDMI
4X USB 3.0
Setup Information:
Plug the power cord into the DC Power port before turning on the unit via the power switch.
For units with the optional battery installed:
1. Make sure the battery is fully charged before turning the unit on for the first time. Batteries can be
charged on a CT15M connected to a DC power source or via the mBAY Charging Station.
2. The CT15M will make a beeping noise once the external battery reaches low levels and will continue
to beep until the battery is replaced.
3. Replace the external battery with a fully charged battery as soon as possible for uninterrupted usage.
4HW-CBA03:
mBAY 4 battery charging station, white
Optional Accessories
See Page 2 for I/O info
Power Switch
Built-in Speaker(Optional)
MF-PUB-007 (ver. A6)
4HB-BAT01:
External Battery
(5200 mAh)
4HG-BAT02:
External Battery
(13400 mAh)
For product support:
US & Canada: [e-mail],
or call 909-468-9757, option 2
Others: [e-mail]