Pioneer DJM-2000 Use and care manual

PROFESSIONAL DJ MIXER
DJM-2000/2000nexus
Firmware Update Manual

- 2 -
Contents
DJM-2000/2000nexus Update Manual for Windows®7 ................................................................. - 3 -
DJM-2000/2000nexus Update Manual for Windows Vista®.......................................................... - 9 -
DJM-2000/2000nexus Update Manual for Windows®XP............................................................. - 15 -
DJM-2000/2000nexus Update Manual for Mac OS®....................................................................... - 19 -
Check the current version of DJM-2000/2000nexus ..................................................................... - 22 -
Error Message and Details ( for Windows ) ...................................................................................... - 23 -
Error Message and Details ( for Mac OS ).......................................................................................... - 23 -

- 3 -
DJM-2000/2000nexus Update Manual for Windows® 7
A . Check the unzipped file:
1. Unzip the downloaded file
Right click on downloaded file and unzip it by "Extract All" on menu.
2. Check the unzipped file
Unzipping the ZIP file generates “DJM-2000_vxxx”_folder.
Confirm the following files are contained in the folder.
1. DJM2000_vxxx.exe
2. DJM2000_vxxx.upd
xxx is version of new firmware.
Extension (.exe or .upd) might not show on by the setting of the computer.
B . Setup DJ Mixer to update:
< STEP1 > Press [ON/ OFF (BEAT EFFECT) ] and
[ON/ OFF (TOUCH PANEL EFFECT) ] with power button.
Move to update mode.
< STEP2 > Check the current version of your firmware by
"Current version" on touch panel. (No need to update it
if current version shows as "x.xx". It is the latest firmware.)
< STEP3 > Connect your computer with DJ Mixer
by LAN cable.
Connect LAN cable to the port of [COMPUTER 1 or 2] on rear on the DJ Mixer.

- 4 -
C . Update the firmware by computer operation:
1. Adjust network setting
< STEP1 > Open "Control Panel" -> "Network and Internet" -> "Network Connections".
< STEP2 > Open "Network and Sharing Center".
< STEP3 > Open "Change adapter setting".

- 5 -
< STEP4 > Open "Properties" of network device DJ Mixer connected.
(Right click on icon -> "Properties")
< STEP5 > Select "Internet Protocol (TCP/IP) and click "Properties".
< STEP6 > Select "Obtain an IP address automatically",
"Obtain DNS server address automatically".
< STEP7 > Close network Connections by "OK".

- 6 -
< STEP9 > Select "Notification area" -> "Customize".
< STEP8 > Right click on task bar -> Select "Properties".
< STEP10 > Select "Show icon and notifications" on network.
< STEP11 > Close "Properties" by "OK".
2. Confirm DJ Mixer and the computer are connected
ar (right bottom of picture).You might check the status of connection by the icon on task b
Icon Status of connection
LAN cabl
e is unconnected.
Check the cable is connected.
Checking the status of connection.
Wait a minute.
DJ Mixer is connected.
Start update tool.

- 7 -
3. Start updating
Close all of applications before updating.
If you were setting firewall by security software, it would not be able to transfer
the data to mixer.
Please read the operation manual of the security software or cancel the firewall.
< STEP1 > Double click "DJM2000_vxxx.exe".
Start update tool.
< STEP2 > Select language.
< STEP3 > Start updating by pressing "Start".
NEVER remove power/LAN cable on updating.
If the waiting picture remains more than 30seconds, the network connection might
not work. Press Cannel button and update again after connecting it.

- 8 -
< STEP4 > Confirm the updating completed.
Updating completed when "update completed" message shows after meter
touch panel reached 100%.
< STEP5 > Restart DJ Mixer.
Please adjust network setting as original if you adjusted it.

- 9 -
DJM-2000/2000nexus Update Manual for Windows Vista®
A . Check the unzipped file:
1. Unzip the downloaded file
Right click on downloaded file and unzip it by "Extract All" on menu.
2. Check the unzipped file
Unzipping the ZIP file generates “DJM-2000_vxxx”_folder.
Confirm the following files are contained in the folder.
1. DJM2000_vxxx.exe
2. DJM2000_vxxx.upd
xxx is version of new firmware.
Extension (.exe or .upd) might not show on by the setting of the computer.
B . Setup DJ Mixer to update:
< STEP1 > Press [ON/ OFF (BEAT EFFECT) ] and
[ON/ OFF (TOUCH PANEL EFFECT) ] with power button.
Move to update mode.
< STEP2 > Check the current version of your firmware by
"Current version" on touch panel. (No need to update it
if current version shows as "x.xx". It is the latest firmware.)
< STEP3 > Connect your computer with DJ Mixer
by LAN cable.
Connect LAN cable to the port of [COMPUTER 1 or 2] on rear on the DJ Mixer.

- 10 -
C . Update the firmware by computer operation:
1. Adjust network setting
< STEP1 > Open "Control Panel" -> "Network and Internet" -> "Network Connections".
< STEP2 > Open "Network and Sharing Center".
< STEP3 > Open "Change adapter setting".

- 11 -
< STEP4 > Open "Properties" of network device DJ Mixer connected.
(Right click on icon -> "Properties")
< STEP5 > Select "Internet Protocol (TCP/IP) and click "Properties".
< STEP6 > Select "Obtain an IP address automatically",
"Obtain DNS server address automatically".
< STEP7 > Close network Connections by "OK".

- 12 -
< STEP8 > Right click on task bar -> Select "Properties".
< STEP9 > Select "Notification area" and check "Network".
< STEP10 > Close "Properties" by "OK".
2. Confirm DJ Mixer and the computer are connected
You might check the status of connection by the icon on task bar (right bottom of picture).
Message
&
Icon
Status of
Connection LAN cable is unconnected.
Check the cable is connected.
Checking the status of
connection. Wait a minute. DJ Mixer is connected. Start update tool.

- 13 -
3. Start updating
Close all of applications before updating.
If you were setting firewall by security software, it would not be able to transfer
the data to mixer.
Please read the operation manual of the security software or cancel the firewall.
< STEP1 > Double click "DJM2000_vxxx.exe".
Start update tool.
< STEP2 > Select language.
< STEP3 > Start updating by pressing "Start".
NEVER remove power/LAN cable on updating.
If the waiting picture remains more than 30seconds, the network connection might
not work. Press Cannel button and update again after connecting it.

- 14 -
< STEP4 > Confirm the updating completed.
Updating completed when "update completed "message shows after meter
touch panel reached 100%.
< STEP5 > Restart DJ Mixer.
Please adjust network setting as original if you adjusted it.

- 15 -
DJM-2000/2000nexus Update Manual for Windows® XP
A . Check the unzipped file:
1. Unzip the downloaded file
Right click on downloaded file and unzip it by "Extract All" on menu.
2. Check the unzipped file
Unzipping the ZIP file generates “DJM-2000_vxxx”_folder.
Confirm the following files are contained in the folder.
1. DJM2000_vxxx.exe
2. DJM2000_vxxx.upd
xxx is version of new firmware.
Extension (.exe or .upd) might not show on by the setting of the computer.
B . Setup DJ Mixer to update:
< STEP1 > Press [ON/ OFF (BEAT EFFECT) ] and
[ON/ OFF (TOUCH PANEL EFFECT) ] with power button.
Move to update mode.
< STEP2 > Check the current version of your firmware by
"Current version" on touch panel. (No need to update it
if current version shows as "x.xx". It is the latest firmware.)
< STEP3 > Connect your computer with DJ Mixer
by LAN cable.
Connect LAN cable to the port of [COMPUTER 1 or 2] on rear on the DJ Mixer.

- 16 -
C . Update the firmware by computer operation:
1. Adjust network setting
< STEP1 > Open "Start" -> "Setting" -> "Control Panel" -> "Network Connections".
< STEP2 > Open "Properties" of network device DJ Mixer connected.
(Right click on icon -> "Properties")
< STEP3 > Check the box of "Notify me when this connection has limited or no connectivity".
< STEP4 > Select "Internet Protocol (TCP/IP) and click "Properties".

- 17 -
< STEP5 > Select "Obtain an IP address automatically",
"Obtain DNS server address automatically".
< STEP6 > Close network Connections by "OK".
2. Confirm DJ Mixer and the computer are connected
You might check the status of connection by the icon on task bar (right bottom of picture).
Icon Status of connection
LAN cable is unconnected.
Check the cable is connected.
Checking the status of connection.
Wait a minute.
DJ Mixer is connected.
Start update tool.
3. Start updating
Close all of applications before updating.
If you were setting firewall by security software, it would not be able to transfer
the data to mixer.
Please read the operation manual of the security software or cancel the firewall.
< STEP1 > Double click "DJM2000_vxxx.exe".
Start update tool.
< STEP2 > Select language.

- 18 -
< STEP3 > Start updating by pressing "Start".
NEVER remove power/LAN cable on updating.
If the waiting picture remains more than 30seconds, the network connection might
not work. Press Cannel button and update again after connecting it.
< STEP4 > Confirm the updating completed.
Updating completed when "update completed" message shows after meter
touch panel reached 100%.
< STEP5 > Restart DJ Mixer.
Please adjust network setting as original if you adjusted it.

- 19 -
DJM-2000/2000nexus Update Manual for Mac OS®
A . Check the unzipped file:
1. Unzip the downloaded file
Right click on downloaded file and unzip it by "Extract All" on menu.
2. Check the unzipped file
Unzipping the ZIP file generates “DJM-2000_vxxx”_folder.
Confirm the following files are contained in the folder.
1. DJM2000_vxxx
xxx is version of new firmware.
B . Setup DJ Mixer to update:
< STEP1 > Press [ON/ OFF (BEAT EFFECT) ] and
[ON/ OFF (TOUCH PANEL EFFECT) ] with power button.
Move to update mode.
< STEP2 > Check the current version of your firmware by
"Current version" on touch panel. (No need to update it
if current version shows as "x.xx". It is the latest firmware.)
< STEP3 > Connect your computer with DJ Mixer
by LAN cable.
Connect LAN cable to the port of [COMPUTER 1 or 2] on rear on the DJ Mixer.

- 20 -
C . Update the firmware by computer operation:
1. Adjust network setting
Open "System Performance" -> "Network" -> "Ethernet" -> "Using DHCP".
3. 2. Confirm DJ Mixer and the computer are connected
You can check the status of connection on "System Performance" -> "Network" -> "Ethernet".
LAN cable is unconnected.
Check the cable is connected. Checking the status of connection.
Wait a minute. DJ Mixer is connected.
Start update tool.
3. Start updating
Close all of applications before updating.
If you were setting firewall by security software, it would not be able to transfer
the data to mixer.
Please read the operation manual of the security software or cancel the firewall.
< STEP1 > Double click "DJM2000_vxxx.exe".
Start update tool.
< STEP2 > Select language.