Pioneer AVH-W4400NEX Installation manual

English
AVH-W4400NEX
DVD RDS AV RECEIVER
Operation Manual
Important (Serial number)
The serial number is located on the bottom of this unit. For your own security and
convenience, be sure to record this number on the enclosed warranty card.

Contents
Thank you for buying this Pioneer
product.
Please read through these instructions
so you will know how to operate your
model properly. After you have finished
reading the instructions, keep this
document in a safe place for future
reference.
The screen shown in the examples may
differ from actual screens, which may be
changed without notice for
performance and function
improvements.
2En
Important
ɷPrecaution ......................... 3
Information to user...................................................... 3
Important safety information .................................. 4
To ensure safe driving................................................. 5
When using a display connected to V OUT......... 5
To avoid battery exhaustion..................................... 5
Rear view camera ......................................................... 5
Handling the SD card slot.......................................... 5
Handling the USB connector.................................... 6
Failure to operate ......................................................... 6
Visit our website............................................................ 6
Protecting the LCD panel and screen.................... 6
Notes on internal memory........................................ 6
About this manual........................................................ 6
ɷParts and controls............. 7
Main unit.......................................................................... 7
Remote Control............................................................. 7
Protecting your product against theft.................. 8
ɷBasic operation ................. 9
Notes on using the LCD panel ................................. 9
Adjusting the LCD panel angle................................ 9
Resetting the microprocessor.................................. 9
Preparing the remote control ............................... 10
Starting up the unit................................................... 10
Using the touch panel.............................................. 11
Top menu screen........................................................ 12
ɷBluetooth ......................... 13
Bluetooth connection .............................................. 13
Bluetooth settings ..................................................... 13
Hands-free phoning.................................................. 14
Bluetooth audio.......................................................... 16
ɷWi-Fi.................................. 18
Wi-Fi connection ........................................................ 18
Wi-Fi settings ............................................................... 18
ɷAV source ......................... 19
Supported AV source................................................ 19
Displaying the AV operation screen.................... 19
Selecting a source...................................................... 19
Changing the display order of source ................ 19
Adjusting the range of favorite source icons area
20
ɷSetup for iPod/iPhone or
smartphone ..................... 20
iPod/iPhone.................................................................. 20
Smartphone (Android™ device)............................ 21
ɷHD Radio™ Technology ... 21
About HD Radio stations......................................... 21
Starting procedure .................................................... 22
Basic operation ........................................................... 22
Storing the strongest broadcast frequencies
(BSM)........................................................................ 22
Radio settings.............................................................. 23
ɷDisc ................................... 23
Inserting and ejecting a disc.................................. 23
Basic operation ........................................................... 23
ɷCompressed files ............. 26
Inserting and ejecting media ................................ 26
Starting procedure .................................................... 27
Basic operation ........................................................... 27
ɷiPod .................................. 30
Connecting your iPod .............................................. 30
Basic operation ........................................................... 30
ɷAppRadio Mode + ........... 32
Using AppRadio Mode +......................................... 32
Starting procedure .................................................... 32
Using the keyboard (for iPhone users)............... 33
Using the audio mix function................................ 33
ɷApple CarPlay .................. 34
Using Apple CarPlay.................................................. 34
Setting the driving position................................... 34
Starting procedure .................................................... 34
Adjusting the volume............................................... 35
ɷAndroid Auto™ ................ 35
Using Android Auto .................................................. 35
Setting the driving position................................... 35
Starting procedure .................................................... 36
Adjusting the volume............................................... 36
Setting the auto-launch function ........................ 36
ɷPandora®.......................... 37
Listening to Pandora................................................. 37
Basic operation ........................................................... 38
ɷSiriusXM® Satellite Radio 39
Subscribing to the SiriusXM Satellite Radio
service ..................................................................... 39
Listening to SiriusXM................................................ 39
Basic operation ........................................................... 39
TuneScan™ ................................................................... 40
SportsFlash™................................................................ 41
SmartFavorites............................................................ 41
Using Featured Favorites Band ............................. 41
Parental lock ................................................................ 41
Using the content alerts function........................ 41
SiriusXM settings........................................................ 42
ɷHDMI ................................ 43
Starting procedure .................................................... 43
Basic operation ........................................................... 43
ɷAUX................................... 43
Starting procedure .................................................... 43
Basic operation ........................................................... 44
ɷAV input........................... 44
Starting procedure.................................................... 44
Basic operation........................................................... 45
ɷWireless Mirroring .......... 45
Starting procedure.................................................... 45
Basic operation........................................................... 46
ɷiDatalink.......................... 46
Using iDatalink ........................................................... 46
Activating iDatalink Maestro................................. 46
Starting procedure.................................................... 47
Displaying obstacle detection information..... 48
iDatalink settings....................................................... 48
ɷSettings ........................... 49
Displaying the setting screen ............................... 49
System settings .......................................................... 49
Theme settings........................................................... 53
Audio settings............................................................. 54
Video settings ............................................................. 58
ɷFavorite menu................. 60
Creating a shortcut ................................................... 60
Selecting a shortcut.................................................. 60
Removing a shortcut................................................ 60
ɷOther functions............... 60
Setting the time and date ...................................... 60
Selecting the video for the rear display ............ 61
Setting the anti-theft function ............................. 61
Restoring this product to the default settings 62
ɷAppendix......................... 62
Troubleshooting ........................................................ 62
Error messages ........................................................... 63
Handling and care of discs..................................... 66
Playable discs.............................................................. 66
Detailed information for playable media ......... 67
Bluetooth...................................................................... 69
SiriusXM® Satellite Radio ........................................ 69
HD Radio™ Technology ........................................... 69
SDXC............................................................................... 69
WMA/WMV .................................................................. 69
FLAC ............................................................................... 70
DivX ................................................................................ 70

Precaution
Information to user
–MODEL NO.: AVH-W4400NEX
FCC ID: AJDK103
IC: 775E-K103
–This device complies with Part 15 of FCC Rules and Innovation, Science, and Economic
Development Canada licence-exempt RSSs. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.
–The Bluetooth antenna cannot be removed (or replaced) by user.
–This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC
radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the
radiator at least 20cm or more away from person’s body.
–This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
–Alteration or modifications carried out without appropriate authorization may invalidate the user’s
right to operate the equipment.
–NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
3En
English
Contents
AAC ................................................................................. 70
Google™, Google Play, Android ............................ 70
Android Auto............................................................... 70
Detailed information regarding connected iPod
devices .................................................................... 70
Using app-based connected content................. 71
Pandora® ....................................................................... 71
HDMI............................................................................... 71
Notice regarding video viewing........................... 71
Notice regarding DVD-Video viewing ................ 71
Notice regarding MP3 file usage.......................... 71
Notice regarding open source licenses.............. 71
Using the LCD screen correctly............................. 71
Specifications .............................................................. 72

CAUTION
This product is a Class 1 laser product classified under the safety standard, IEC 60825-1:2007, and
contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt
to gain access to the inside of the product. Refer all servicing to qualified personnel.
CLASS 1 LASER PRODUCT
CAUTION—CLASS 1M VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN, DO NOT VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
4En
CAN ICES-3 B/NMB-3 B
WARNING
•This product contains chemicals known to the State of California and other governmental entities to
cause cancer and birth defects or other reproductive harm. Wash hands after handling.
•Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the
product, and to protect it from overheating. To prevent fire hazard, the openings should never be
blocked or covered with items (such as papers, floor mat, cloths).
CAUTION
This product is evaluated in moderate and tropical climate condition under the Audio, video and
similar electronic apparatus - Safety requirements, IEC 60065.
Get the most out of your equipment by playing it at a safe level—a level that lets the sound come
through clearly without annoying blaring or distortion and, most importantly, without affecting your
sensitive hearing. Sound can be deceiving.
Over time, your hearing“comfort level” adapts to higher volumes of sound, so what sounds“normal”
can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a
safe level BEFORE your hearing adapts.
▶ESTABLISH A SAFE LEVEL:
– Set your volume control at a low setting.
– Slowly increase the sound until you can hear it comfortably and clearly, without
distortion.
– Once you have established a comfortable sound level, set the dial and leave it
there.
▶BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
– Do not turn up the volume so high that you can’t hear what’s around you.
– Use caution or temporarily discontinue use in potentially hazardous situations.
The Safety of Your Ears is in Your Hands
– Do not use headphones while operating a motorized vehicle; the use of
headphones may create a traffic hazard and is illegal in many areas.
Important safety information
WARNING
•Do not attempt to install or service this product by yourself. Installation or servicing of this product by
persons without training and experience in electronic equipment and automotive accessories may
be dangerous and could expose you to the risk of electric shock, injury or other hazards.
•Do not allow this product to come into contact with liquids. Electrical shock could result. Also,
damage to the product, smoke, and overheating could result from contact with liquids.
•If liquid or foreign matter should get inside this product, park your vehicle in a safe place, turn the
ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorized Pioneer
Service Station. Do not use this product in this condition because doing so may result in a fire, electric
shock, or other failure.
•If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the
LCD screen, turn off the power immediately and consult your dealer or the nearest authorized
Pioneer Service Station. Using this product in this condition may result in permanent damage to the
system.
•Do not disassemble or modify this product, as there are high-voltage components inside which may
cause an electric shock. Be sure to consult your dealer or the nearest authorized Pioneer Service
Station for internal inspection, adjustments or repairs.
Before using this product, be sure to read and fully understand the following safety
information:
•Do not operate this product, any applications, or the rear view camera option (if
purchased) if doing so will divert your attention in any way from the safe operation of
your vehicle. Always observe safe driving rules and follow all existing traffic
regulations. If you experience difficulty in operating this product, pull over, park your
vehicle in a safe location and apply the parking brake before making the necessary
adjustments.
•Never set the volume of this product so high that you cannot hear outside traffic and
emergency vehicles.
•To promote safety, certain functions are disabled unless the vehicle is stopped and the
parking brake is applied.
•Keep this manual handy as a reference for operating procedures and safety
information.
•Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the
performance of any of the vehicle’s operating systems or safety features, including air
bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the
vehicle.
•Please remember to fasten your seat belt at all times while operating your vehicle. If
you are ever in an accident, your injuries can be considerably more severe if your seat
belt is not properly buckled.
•Never use headphones while driving.

5En
English
•Rear visibility systems (backup cameras) are required in certain new vehicles sold in
the U.S. and Canada. U.S. regulations began according to a two year phase-in on May
1, 2016, and both the U.S. and Canada require that all such vehicles manufactured on
or after May 1, 2018 have rear visibility systems. Owners of vehicles equipped with
compliant rear visibility systems should not install or use this product in a way
that alters or disables that system's compliance with applicable regulations. If
you are unsure whether your vehicle has a rear visibility system subject to the U.S. or
Canadian regulations, please contact the vehicle manufacturer or dealer.
If your vehicle has a compliant backup camera that displays the backup view through
the factory receiver, do not use the Pioneer receiver unless it is connected to and
displays the same view as the factory backup camera. Connection to the factory
backup camera will require an adaptor, sold separately. Not all vehicles may be able to
connect. Please check with a qualified professional installer for installation options
specific to your vehicle.
To ensure safe driving
Parking brake interlock
Certain functions (such as viewing of video image and certain touch panel key
operations) offered by this product could be dangerous (possibly resulting in serious
injury or death) and/or unlawful if used while driving. To prevent such functions from
being used while the vehicle is in motion, there is an interlock system that senses when
the parking brake is set and when the vehicle is moving. If you attempt to use the
functions described above while driving, they will become disabled until you stop the
vehicle in a safe place.
WARNING
• LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND
MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH.
IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY
RESULT IN SERIOUS INJURY OR DAMAGE.
• Do not take any steps to tamper with or disable the parking brake interlock system which is in
place for your protection. Tampering with or disabling the parking brake interlock system
could result in serious injury or death.
• To avoid the risk of damage and injury and the potential violation of applicable laws, this
product is not for use with a video image that is visible to the driver.
•In some countries the viewing of video image on a display inside a vehicle even by persons other
than the driver may be illegal. Where such regulations apply, they must be obeyed.
If you attempt to watch video image while driving, the warning “Viewing of front seat
video source while driving is strictly prohibited.” will appear on the screen. To watch
video image on this display, stop the vehicle in a safe place and apply the parking brake.
Please keep the brake pedal pushed down before releasing the parking brake.
When using a display connected to V OUT
The video output terminal (V OUT) is for connection of a display to enable passengers in
the rear seats to watch video images.
WARNING
NEVER install the rear display in a location that enables the driver to watch video images while driving.
To avoid battery exhaustion
Be sure to run the vehicle engine while using this product. Using this product without
running the engine can drain the battery.
WARNING
Do not install this product in a vehicle that does not have an ACC wire or circuitry available.
Rear view camera
With an optional rear view camera, you are able to use this product as an aid to keep an
eye on trailers, or backing into a tight parking spot.
WARNING
•SCREEN IMAGE MAY APPEAR REVERSED.
•USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN
INJURY OR DAMAGE.
•If this product displays the vehicle's backup camera image, close the LCD panel before putting the
vehicle in reverse.
CAUTION
•For safety reasons, the rear view camera function is not available until this product boots up
completely.
•The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up.
Do not use this function for entertainment purposes.
Handling the SD card slot
CAUTION
•Keep the SD memory card out of the reach of small children to prevent them from accidentally
swallowing it.
•To prevent data loss and damage to the storage device, never remove it from this product while data
is being transferred.
•If data loss or corruption occurs on the storage device for any reason, it is usually not possible to
recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or
corruption.

6En
•Never insert or eject an SD memory card while driving.
Handling the USB connector
CAUTION
•To prevent data loss and damage to the storage device, never remove it from this product while data
is being transferred.
•Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no
responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using
this product.
Failure to operate
After-sales service for Pioneer products
Please contact the dealer or distributor from which you purchased the product for after-sales service
(including warranty conditions) or any other information. In case the necessary information is not
available, please contact the companies listed below.
Please do not ship your product to the companies at the addresses listed below for repair without
making advance contact.
–USA&CANADA
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760 Long Beach, CA 90801-1760
800-421-1404
For warranty information, please see the Limited Warranty sheet included with your product.
Visit our website
Visit us at the following site:
http://www.pioneerelectronics.com
http://www.pioneerelectronics.ca
•We offer the latest information about PIONEER CORPORATION on our website.
•Pioneer regularly provides software updates to further improve it’s products. Please
check the support section of the Pioneer website for all available software updates.
1Register your product.
2Receive updates on the latest products and technologies.
3Download owner’s manuals, order product catalogs, research new products, and
much more.
4Receive notices of software upgrades and software updates.
Protecting the LCD panel and screen
•Do not expose the LCD screen to direct sunlight when this product is not used. This
may result in LCD screen malfunction due to the resulting high temperatures.
•When using a cellular phone, keep the antenna of the cellular phone away from the
LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc.
•To protect the LCD screen from damage, be sure to touch the touch panel keys only
with your finger and do so gently.
Notes on internal memory
•If the battery is disconnected or discharged, the memory will be erased and must be
reprogrammed.
•The information will be erased by disconnecting the yellow lead from the battery (or
removing the battery itself).
•Some of the settings and recorded contents will not be reset.
About this manual
This manual uses diagrams of actual screens to describe operations. However, the
screens on some units may not match those shown in this manual depending on the
model used.
This indicates to touch the appropriate soft key on the touch screen.
This indicates to touch and hold the appropriate soft key on the touch screen.
Meanings of symbols used in this manual

Parts and controls
Main unit
LCD screen
VOL (+/-)
Press to switch between the Application screen and the AV operation screen.
Press and hold to switch to the camera view mode.
To activate the camera view mode with this button, set [Back Camera Input] to
[On] or [AV Input] to [Camera] (page 49).
Press to display the top menu screen.
Press and hold to power off. To power back on, press any button.
Press to display the menu bar (page 11).
Press and hold to mute or unmute.
Press to display the top menu screen or back to previous screen.
Press and hold to turn off the display.
Press to activate the voice recognition mode with a connected iPhone or
smartphone.
Press and hold to display the connectable device list screen or device search
screen.
RESET Press to reset the microprocessor (page 9).
SD card slot Refer to Inserting and ejecting an SD memory card (page 26).
Auto EQ
microphone
input jack
Use to connect a microphone for acoustical measurement (sold separately).
Disc-loading
slot
Refer to Inserting and ejecting a disc (page 23).
Remote Control
7En
English
NOTE
VOLUME (+/-)
REAR SRC Press to cycle through all the available rear sources.
Press and hold to turn the rear source off.
SRC Press to cycle through all the available sources.
Press and hold to turn the source off.
TOP MENU Press to return to the top menu during DVD playback.
Source mode
select switch
Use to switch the source mode between the front source and the rear source.
Thumb pad Use to select a menu on the DVD menu.
MUTE
MENU Displays the DVD menu during DVD playback.
AUDIO
SUBTITLE
ANGLE
Press to change the audio language, subtitle language or viewing angle
during DVD playback.
BAND/ESC Press to select the tuner band when tuner is selected as a source.
Press to switch between media file types when playing the following types of
data:
•Disc
•External storage device (USB, SD)

8En
CAUTION
•Do not attempt to detach the front panel while DISC/SD is in the eject position.
•Do not attempt to detach the front panel while data is being written to USB/SD. Doing so may cause
the data to become corrupted.
•After the front panel has been detached, the attaching plate will move back to its original position
automatically. Be careful not to let hands or other objects get caught behind the monitor as it is
moving back.
•Please make sure that the front panel is in its original position while the vehicle is in motion. It is
dangerous to drive with the front panel sticking out.
•Do not place beverages or other objects on top of the front panel while it is fully open.
Important
•Handle the front panel with care when removing or attaching it.
•Avoid subjecting the front panel to excessive shock.
•Keep the front panel out of direct sunlight and high temperatures.
•If removed, replace the front panel on the product before starting up your vehicle.
1Press .
2Touch .
3Slide the dial at the bottom of the front panel to the right, and lift up the front
panel while pushing down on the dial.
RETURN Press to return to the specified point and start playback from there.
Press to pause or resume playback.
or For audio: Press and hold to perform fast reverse or fast forward.
For video: Press to perform fast reverse or fast forward.
or Press to return to the previous track (chapter) or go to the next track (chapter).
Press to answer or end a call.
Press to stop playback.
If you resume playback, playback will start from the point where you stopped.
Press the button again to stop playback completely.
FOLDER/P.CH Press to select the next or previous title or folder.
Press to recall radio station frequencies assigned to preset channel keys.
Press to answer or end a call.
Protecting your product against theft
Removing the front panel
4Put the front panel into the provided protective case for safe keeping.
1Slide the front panel into the top of the product and push it into place.
Slide the inserter on the front panel into the insertion slot on top of the unit and push
it into place.
2Push on the bottom of the front panel until it clicks into place.
Attaching the front panel

Basic operation
Notes on using the LCD panel
9En
English
WARNING
•Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be
especially cautious of children’s hands and fingers.
•Do not use with the LCD panel left open. It may result in injury in the event of an accident.
•Close the LCD panel before putting the vehicle in motion. Driving with the LCD panel open may
damage the unit, and any backup camera image shown through the LCD panel will not be visible.
CAUTION
•Do not open or close the LCD panel forcefully. It may cause a malfunction.
•Do not operate this product until the LCD panel has completely opened or closed. If this product is
operated while the LCD panel is opening or closing, the LCD panel may stop at that angle for safety.
•Do not place glass or can on the open LCD panel.
Adjusting the LCD panel angle
1Press .
2Touch or to adjust the angle of the LCD panel.
3Touch .
Returns to the previous screen.
Resetting the microprocessor
CAUTION
•Pressing the RESET button resets settings and recorded contents to the factory settings.
– Do not perform this operation when a device is connected to this product.
– Some of the settings and recorded contents will not be reset.
•The microprocessor must be reset under the following conditions:
– Prior to using this product for the first time after installation.
– If this product fails to operate properly.
– If there appears to be problems with the operation of the system.
1Turn the ignition switch OFF.
2Press RESET with a pen tip or other pointed tools.
Settings and recorded contents are reset to the factory settings.

Preparing the remote control
10 En
Remove the insulation sheet before use.
How to replace the battery
Insert the CR2025 (3 V) battery with the plus (+) and
minus (-) poles orientated properly.
WARNING
•Do not ingest the battery, Chemical Burn Hazard.
(The remote control supplied with) This product contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to
death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from
children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
•Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine,
fire or the like.
CAUTION
•Remove the battery if the remote control is not used for a month or longer.
•There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or
equivalent type.
•Do not handle the battery with metallic tools.
•Do not store the battery with metallic objects.
•If the battery leaks, wipe the remote control completely clean and install a new battery.
•When disposing of used batteries, please comply with governmental regulations or environmental
public institutions’ rules that apply in your country/area.
•“Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate. (Applicable to California, U.S.A.)”
Point the remote control in the direction of the front panel to operate.
Using the remote control
NOTE
The remote control may not function properly in direct sunlight.
Important
•Do not store the remote control in high temperatures or direct sunlight.
•Do not let the remote control fall onto the floor, where it may become jammed under the brake or gas
pedal.
Starting up the unit
1Start the engine to boot up the system.
The [Select Program Language] screen appears.
NOTES
•From the second time on, the screen shown will differ depending on the previous conditions.
•From the second time on, enter the password for the anti-theft function if the password entry
screen appears.
2Touch the language.
3Touch .
The [Speaker Mode Settings] screen appears.
4Touch the speaker modes.
[Standard Mode]
4-speaker system with front and rear speakers, or a 6-speaker system with front and
rear speakers and subwoofers.
[Network Mode]
3-way system with a high range speaker, middle range speaker and subwoofer (low
range speaker) for reproduction of high, middle and low frequencies (bands).
WARNING
Do not use the unit in standard mode when a speaker system for 3-way network mode is
connected to the unit. This may cause damage to the speakers.
5Touch .
Initial Legal Disclaimer screen appears.
6Touch [OK].
The top menu screen appears.
NOTE
Once the speaker mode is set, the setting cannot be changed unless this product is restored to the
default settings. Restore the default settings to change the speaker mode setting (page 62).

11En
English
To change the speaker mode, you need to restore this product to the default settings.
1Restore the default setting (page 62).
Using the touch panel
You can operate this product by touching the keys on the screen directly with your
fingers.
NOTE
To protect the LCD screen from damage, be sure to touch the screen only with your finger gently.
: Returns to the previous screen.
: Close the screen.
Touching an item on the list allows you to narrow down the options and
proceed to the next operation.
Appears when all characters are not displayed on the display area.
If you touch the key, the rests are scrolled for display.
This function is available only when you stop your vehicle in a safe place and apply
the parking brake.
Appears when items cannot be displayed on a single page.
Drag the side bar, the initial search bar or the list to view any hidden items.
You can change the playback point by dragging the key.
The playback time corresponding to the position of the key is displayed while
dragging the key.
Switching the speaker mode
Common touch panel keys
Operating list screens
NOTE
1Press .
The menu bar pops up on the screen.
NOTE
The menu bar availability may vary depending on the activating source.
Switches the dimmer duration by day or night.
When AppRadio Mode + is on, AppRadio Mode + SideControlBar is displayed.
Switches between playback and pause.
Skips files forward or backward.
Performs fast reverse or fast forward.
Displays setting menu screen (page 49).
Closes the menu bar.
1Touch or .
Operating the time bar
Operating the menu bar
NOTE
Switching the operation panel

12 En
The hidden function keys appear.
NOTE
This key does not appear for some AV sources.
Displays the characters that are entered.
Moves the cursor to the right or left for a number of characters equivalent to the
number of touches.
Enters the characters in the text box.
Deletes the input text to the left of the cursor one letter at a time.
Touching and holding the key deletes the letters to the left of the cursor in rapid
succession.
Confirms the entry and proceeds to the next step.
Enters a space.
Switches between alphabet and numbers/symbols.
Switches between capital and lower case letters.
Top menu screen
Operating the on-screen keyboard
Favorite source icons
TIPS
•When you connect the external navigation system to this unit, the navigation
mode key is displayed at the middle of the right side of the display.
•If you select [Power OFF], you can turn off almost all functions. The [Power OFF]
mode is released in the following cases.
– An incoming call is received (only for hands-free phoning via Bluetooth).
– A rear view camera image is input when the vehicle is in reverse.
– A button on this unit is pressed.
– The ignition switch is turned off (ACC OFF), then turned on (ACC ON).
AV/Device source operation key.
Displays the current source.
TIP
When the last source is displayed behind the key, you can switch the source by
touching the key.
Setting the time and date (page 60)
Settings (page 49) and Favorite menu (page 60)

13En
English
Connected device key
Displays connected device.
Switches the source or application with connected devices such as AppRadio
Mode +, external navigation system, Apple CarPlay, Android Auto.
TIPS
•When a device with a compatible application is connected, the favorite
application key appears. Once the key appears, you can adjust the range of the
favorite application key area with the following steps.
1Touch and hold .
appears at the top right of the favorite application key.
2Drag to the desired position.
To finish the adjusting, touch any place of the display except for the
favorite application key.
•You can also switch the mobile device to be connected with the following steps.
1Touch .
2Touch .
3Select desired device then follow the instruction.
Touch for the first wireless connection with the device.
NOTE
This function is available only when you stop your vehicle in a safe place and apply
the parking brake or the vehicle is completely stopped.
AV source (page 19)
Hands-free phoning (page 14)
Bluetooth
Bluetooth connection
1Turn on the Bluetooth function on the device.
2Press .
3Touch then .
The Bluetooth screen appears.
4Touch [Connection].
5Touch .
The unit starts to search for available devices, then displays them in the device list.
6Touch the Bluetooth device name.
After the device is successfully registered, a Bluetooth connection is established by
the system. Once the connection is established, the device name is displayed on the
list.
NOTES
•If twenty devices are already paired, [Memory Full] is displayed. Delete a paired device first (page 14).
•If your device supports SSP (Secure Simple Pairing), a six-digit number appears on the display of this
product. Touch [Yes] to pair the device.
•If a PIN code input is required, enter a PIN code. (The default PIN code is "0000".)
TIP
The Bluetooth connection can also be made by detecting this product from the Bluetooth device.
Before registration, make sure that [Visibility] in the [Bluetooth] menu is set to [On] (page 14). For
details on Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth
device.
Bluetooth settings
1Press .
2Touch then .
CAUTION
Never turn this product off and disconnect the device while the Bluetooth setting operation is being
processed.

Menu Item Description
[Connection] Connect, disconnect, or delete registered Bluetooth device
manually.
Touch to delete registered device.
To connect a registered Bluetooth device manually, touch
the name of the device.
To disconnect the device, touch the name of the connected
device in the list.
Connect the Bluetooth device manually in the following cases:
•Two or more Bluetooth devices are registered, and you want to
manually select the device to be used.
•You want to reconnect a disconnected Bluetooth device.
•Connection cannot be established automatically for some
reason.
[Auto Connect]
[On] [Off]
Select [On] to connect the last connected Bluetooth device
automatically.
[Visibility]
[On] [Off]
Select [On] to make this product visible to the other device.
[PIN Code Input] Change the PIN code for Bluetooth connection.
The default PIN code is“0000”.
1Touch [0] to [9] to input the pin code (up to 8 digits).
2Touch .
[Device Information] Displaying the device name and address of this product.
[Bluetooth Memory Clear] Touch [Clear] then [OK] to clear the Bluetooth memory.
Hands-free phoning
14 En
To use this function you need to connect your cellular phone to this product via
Bluetooth in advance (page 13).
CAUTION
For your safety, avoid talking on the phone as much as possible while driving.
1Press .
2Touch .
The phone menu screen appears.
3Touch one of the call icons on the phone menu screen.
The following items are displayed.
•Name of the current cellular phone
•List number of the current cellular phone
•Reception status of the current cellular phone
•Battery status of the current cellular phone
Using preset dial list (page 15)
Using phone book
Select a contact from the phone book. Touch the desired name on the list then
select the phone number.
•The contacts on your phone will be automatically transferred to this product.
•Update the phone book manually.
•[Visibility] of the [Bluetooth] screen should be on (page 14).
•If two cellular phones are automatically connected to this product with the
Bluetooth device auto connect function, the phone book of the second phone is
displayed.
Using call history
Make a phone call from the received call , dialed call , or missed call .
Direct phone number input
Enter the number keys to enter the phone number then touch to make a call.
Switches to the voice recognition function (page 15).
NOTE
Making a phone call
▶To end the call
1Touch .
TIPS
NOTES

15En
English
▶Registering a phone number
You can easily store up to six phone numbers per device as presets.
1Press .
2Touch .
3Touch or .
On the [Phone Book] screen, touch the desired name to display the contact’s phone
number.
4Touch .
▶Dialing from the preset dial list
1Touch .
2Touch the desired entry on the list to make a call.
The dial screen appears and dialing starts.
▶Deleting a phone number
1Press .
2Touch .
3Touch .
4Touch .
5Touch [Yes].
1Touch to answer the call.
Touch to end the call.
TIPS
•Touch while getting a call waiting, switch to the talking person.
•Touch while getting a call waiting to reject the call.
NOTE
When two phones are connected at the same time, if an incoming call is received on the second phone
while you are talking on the first phone, the dial confirmation screen for the second phone will be
displayed.
Using the preset dial lists
Receiving a phone call
You can use the voice recognition function of iPhone or smartphone.
NOTES
•When an iPhone running iOS 6.1 or higher is used, Siri Eyes Free Mode is available with this product.
•For using this function with a smartphone, the device must be compatible with Android Auto. For
using the voice recognition function with a smartphone, launch Android Auto beforehand.
1Press .
2Touch .
3Touch .
The voice recognition function launches and the voice control screen appears.
TIP
You can also launch the voice recognition function by pressing .
1Touch .
TIP
To display the dial confirmation screen, touch again.
NOTES
•The dial confirmation screen cannot be minimized on the AV operation screen.
•AV sources cannot be selected even if the dial confirmation screen is minimized while talking on the
phone or receiving an incoming call.
1Press .
2Touch then .
Menu Item Description
[Auto Answer]
[On] [Off]
Select [On] to answer an incoming call automatically.
[Ring Tone]
[On] [Off]
Select [On] if the ring tone does not come out from the car
speakers.
[Invert Name] Select [Yes] to change the order of the first and last names
in the phone book.
Voice recognition function
Minimizing the dial confirmation screen
Phone settings

16 En
During a conversation, you can switch to private mode (talk directly on your cellular
phone).
1Touch or to turn private mode on or off.
NOTES
•If two cellular phones are connected to this product and the first phone is set to private mode, you
can receive incoming calls on the second phone while maintaining the call in progress on the first
phone.
•When two cellular phones are connected to this product and private mode of the first phone is
turned off, if an incoming call on the second phone is answered while a call is in progress on the first
phone or while dialing or receiving a call on the first phone, the call, dialing, or receiving on the first
phone is ended.
This product can be adjusted to the other party’s listening volume.
1Touch to switch between the three volume levels.
▶General notes
•Connection to all cellular phones featuring Bluetooth wireless technology is not
guaranteed.
•The line-of-sight distance between this product and your cellular phone must be 10
meters or less when sending and receiving voice and data via Bluetooth technology.
•With some cellular phones, the ring sound may not be output from the speakers.
•If private mode is selected on the cellular phone, hands-free phoning may be disabled.
▶Registration and connection
•Cellular phone operations vary depending on the type of cellular phone. Refer to the
instruction manual that came with your cellular phone for detailed instructions.
•When phone book transfer does not work, disconnect your phone and then perform
pairing again from your phone to this product.
▶Making and receiving calls
•You may hear a noise in the following situations:
– When you answer the phone using the button on the phone.
– When the person on the other end of the line hangs up the phone.
•If the person on the other end of the line cannot hear the conversation due to an echo,
decrease the volume level for hands-free phoning.
•With some cellular phones, even after you press the accept button on the cellular
phone when a call comes in, hands-free phoning may not be performed.
Setting the private mode
Adjusting the other party’s listening volume
Notes for hands-free phoning
•The registered name will appear if the phone number is already registered in the
phone book. When the same phone number is registered under different names, only
the phone number will be displayed.
▶The received call and dialed number histories
•You cannot make a call to the entry of an unknown user (no phone number) in the
received call history.
•If calls are made by operating your cellular phone, no history data will be recorded in
this product.
▶Phone book transfers
•If there are more than 1 000 phone book entries on your cellular phone, not all entries
may download completely.
•Depending on the phone, this product may not display the phone book correctly.
•If the phone book in the phone contains image data, the phone book may not be
transferred correctly.
•Depending on the cellular phone, phone book transfer may not be available.
Bluetooth audio
Before using the Bluetooth audio player, register and connect the device to this product
(page 13).
NOTES
•Depending on the Bluetooth audio player connected to this product, the available operations with
this product may be limited to the following two levels:
– A2DP (Advanced Audio Distribution Profile): Only playing back songs on your audio player is
possible.
– A2DP and AVRCP (Audio/Video Remote Control Profile): Playing back, pausing, selecting songs, etc.,
are possible.
•Depending on the Bluetooth device connected to this product, the available operations with this
product may be limited or differ from the descriptions in this manual.
•While you are listening to songs on your Bluetooth device, refrain from operating the phone function
as much as possible. If you try operating, the signal may cause noise for song playback.
•When you are talking on the Bluetooth device connected to this product via Bluetooth, it may pause
playback.
1Press .
2Touch then .
The system setting screen appears.
3Touch [AV Source Settings].
4Confirm that [Bluetooth Audio] is turned on.
5Press .

17En
English
6Touch .
The AV source screen appears.
7Touch [Bluetooth Audio].
The Bluetooth audio playback screen appears.
Switches between playback and pause.
Skips files forward or backward.
•By pressing then touch or , you can also skip files forward or
backward.
•By pressing then touch and hold or , you can also perform fast
reverse or fast forward.
Selects a file or folder from the list to playback.
This function is available only when the AVRCP version of the Bluetooth device is
1.4 or higher.
Switches among the Bluetooth devices when the devices are connected to
this product via Bluetooth.
Sets a repeat play range.
Plays files in random order.
Bluetooth audio playback screen 1
Basic operation
NOTE
Bluetooth audio playback screen 2

Wi-Fi
18 En
You can connect your Wi-Fi certfied mobile device to this product via Wi-Fi connection.
Wi-Fi connection
1Turn on the Wi-Fi function on the device.
2Press .
3Touch then .
4Touch [Wi-Fi Settings].
5Set [Wi-Fi] to [ON].
6Touch [Device Information].
7Connect this product with the dislayed network name in [Device Information]
from the mobile device.
Wi-Fi settings
1Press .
2Touch then .
3Touch [Wi-Fi Settings].
NOTE
This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
The menu items vary according to the source.
Menu Item Description
[Wi-Fi]
[ON] [OFF]
Switches Wi-Fi connection on or off.
[Device Information] Displays the network name and MAC address of this
product.
Wi-Fi audio
Before using the Wi-Fi audio player, connect the device to this product via Apple CarPlay
(page 34) or Android Auto wirelessly (page 36).
1Press then touch .
2Touch [Wi-Fi Audio].
The Wi-Fi audio playback screen appears.
NOTES
•[Wi-Fi Audio] is displayed as [Android Auto] when the Android Auto is in use.
•[Wi-Fi Audio] is displayed as [Apple CarPlay] when the Apple CarPlay is in use.
Wi-Fi audio screen (Example: Apple CarPlay)
Wi-Fi audio with Apple CarPlay operation is same as the iPod source function. For details
of the operation, refer to the iPod operation (page 30).
Basic operation

AV source
Supported AV source
19En
English
You can play or use the following sources with this product.
•HD Radio Broadcasts (HD Radio™ tuner)
•CD
•ROM (compressed audio or video files on discs)
•DVD-Video
•Video-CD
The following sources can be played back or used by connecting an auxiliary device.
•USB
•SD
•iPod
•Pandora®
•Bluetooth® audio
•Wi-Fi audio (Apple CarPlay, Android Auto)
•SiriusXM® Satellite Radio
•AV input (AV)
•AUX
•HDMI
•Wireless Mirroring
•Car Sources (iDatalink)
Displaying the AV operation screen
1Press then touch the AV operation key.
The AV operation screen appears.
Displays the source list.
Recalls equalizer curves (page 55).
Selecting a source
1Press then touch .
2Touch the source icon.
When you select [Source OFF], the AV source is turned off.
1Press then touch the AV operation key.
2Touch .
3Touch the source key.
When you select [Source OFF], the AV source is turned off.
Changing the display order of source
NOTE
This function is available only when you stop your vehicle in a safe place and apply the parking brake.
1Press then touch .
2Touch and hold the source icon and drag the icon to the desired position.
1Press then touch the AV operation key.
2Touch .
3Touch .
Source on the AV source selection screen
Source on the source list
Changing the display order of source icons
Changing the display order of source keys

20 En
4Drag the source key to the desired position.
Adjusting the range of favorite source icons area
NOTE
This function is available only when you stop your vehicle in a safe place and apply the parking brake.
1Press .
2Touch and hold .
appears at the top left of the favorite source icons.
3Drag to the desired position.
To finish the adjusting, touch any place of the display except for the favorite source
icons area.
Setup for iPod/iPhone or
smartphone
When using an iPod/iPhone or a smartphone with this product, configure settings of this
product according to the device to be connected. This section describes the settings
required for each device.
NOTES
•Operation methods may vary depending on the iPod/iPhone model or smartphone and its software
version.
•Depending on the software version of iPod/iPhone or the version of smartphone OS, it may not be
compatible with this unit.
•The setting may not be operable right after it is changed.
•This setting is available only when a hands-free telephone is not used.
•The setting will change after the following processes are automatically executed.
– The source is turned off.
– AppRadio Mode +, Apple CarPlay or Android Auto is exited.
– The smartphone connection (USB and Bluetooth) is disconnected.
iPod/iPhone
Compatible iPod/iPhone models
•iPhone 7, 7 Plus
•iPhone SE
•iPhone 6, 6 Plus, 6s, 6s Plus
•iPhone 5, 5c, 5s
•iPod touch 5th, 6th generation
•iPod nano 7th generation
Depending on the iPod models, it may not be compatible with some AV sources. For
details about iPod/iPhone compatibility with this product, refer to the information on
our website.
1Press .
2Touch then .
3Touch [Smartphone-related Settings].
4Touch [Smartphone Setup].
5Touch [iPhone/iPod].
The available function icons are displayed.