Pioneer CNSD-300FM Installation and operating instructions

Upgrade Instructions and
Operation Manual Addendum
2012 F-series NAVIGATION UPGRADE SD-CARD
CNSD-350FM
2012 F/X-series NAVIGATION UPGRADE SD-CARD
CNSD-300FM
This software upgrade will result in changes to certain
features and availability of information. While the
changes are intended to improve the overall user
experience for most users, Pioneer and its licensors
disclaim any warranty or liability for damages in
connection with such changes.
English

En
2

En 3

En
4

En 5

En
6

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly.
Important
!The screens shown in the examples may
differ from actual screens.
!Actual screens may be changed without
notice for performance and function im-
provements.
Precaution
Failure to operate 8
Visit our website 9
SD memory card 9
Copyright 9
Manual overview 9
Conventions used in this manual 9
Models to be upgraded 10
–To customers who have purchased the
CNSD-350FM 10
–To customers who have purchased the
CNSD-300FM 10
Renewed points through this upgrade 10
–For customers upgrading the hardware
for the first time 10
–For customers who have previously
upgraded the hardware 10
–Browsing information on MSN
Direct 10
Setting items to be deleted and initialized by
upgrade 11
License agreement
PIONEER CNSD-350FM, CNSD-300FM - for
U.S.A. 12
PIONEER CNSD-350FM, CNSD-300FM - for
Canada 14
TERMS AND CONDITIONS FOR THE
TOMTOM DATA 16
About the database
About the data for the map database 19
Icons for XM Satellite Radio 19
Instructions for upgrading
The navigation system upgrade process 20
Preparation for upgrade 20
–Checking the device number 20
–Checking the current version 20
–Getting the password for
authentication 21
Upgrade procedures 21
–Upgrading the software program and
the map database 21
–Checking whether the upgrade was
done properly 22
–Updating the Bluetooth wireless
technology software 23
Changes on the upgraded program
Navigation functions 24
–Signpost and recommended lane 24
–Switching the map mode 24
–Hiding controls for tilt and rotation
angle 25
–Searching for POIs around the
address 25
AV functions 26
–Selecting a track from the list 26
Settings Menu 26
–Textured Polygons 26
–POI Settings 26
–Displayed Info 27
–Manage Track Logs 27
–Changes of default value 27
Restore Factory Settings 28
–Setting items to be deleted 29
Troubleshooting
Problems in the procedures for updating 31
Messages in the procedures for
updating 31
En 7
Contents

!Read the entire manual before upgrading
the program of your navigation system.
!This package is unique, and cannot be in-
stalled on more than one unit.
Failure to operate
!Should the navigation system fail to oper-
ate properly, contact your dealer or nearest
authorized Pioneer Service Station.
!Do not lose the supplied Media Number
Card (MEDIA NUMBER CARD). If the
Media Number Card is lost, reissue of the
Media Number (MEDIA NUMBER) is not
possible. Also you must submit the Media
Number Card when repairs are needed.
The card is necessary as proof of authenti-
city if service is required (including recov-
ery).
After-sales service for Pioneer products
Please contact the dealer or distributor from
which you purchased the product for after-
sales service (including warranty conditions)
or any other information. In case the necessary
information is not available, please contact the
companies listed below.
Please do not ship your product to the compa-
nies at the addresses listed below for repair
without making advance contact.
!U.S.A
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760 Long Beach, CA 90801-1760
800-421-1404
!CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
340 Ferrier Street, Unit 2, Markham, Ontario
L3R 2Z5, Canada
1-877-283-5901
905-479-4411
For warranty information, please see the Lim-
ited Warranty sheet included with your pro-
duct.
En
8
Chapter
01 Precaution

Visit our website
Visit us at the following site:
http://www.pioneerelectronics.com
In Canada
http://www.pioneerelectronics.ca
1 Register your product. We will keep the details
of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.
2 Receive updates on the latest products and
technologies.
3 Download owner’s manuals, order product
catalogs, research new products, and much
more.
4 Receive notices of software upgrades and
software updates.
SD memory card
pKeep the SD memory card out of the reach
of small children to prevent them from ac-
cidentally swallowing it.
pDo not store the SD memory card in high
temperatures or direct sunlight.
pDo not subject the SD memory card to
shock or impact.
pDo not allow the SD memory card to come
into contact with liquids. Damage to the
SD memory card and your products could
result from contact with liquids.
pBe careful not to touch terminals on the
SD memory card. Doing so may cause con-
nection failures. If any terminals are dirty,
wipe them with a clean dry cloth.
pSD Logo is a trademark of SD-3C, LLC.
Copyright
The names of private corporations, pro-
ducts and other entities described herein
are the registered trademarks or trade-
marks of their respective firms.
=For more information, refer to the Operation
Manual of your navigation system.
Manual overview
This manual describes how to get the pass-
word and activate the upgrade. It also provides
an overview of how functions change after the
upgrade.
Conventions used in this
manual
Before moving on, take a few minutes to read
the following information about the conven-
tions used in this manual. Familiarity with
these conventions will help you greatly as you
learn how to use your new equipment.
!Buttons on your navigation system are de-
scribed in ALL CAPITAL,BOLD lettering:
e.g.)
With the map displayed, press the MENU
button.
!Menu items, screen titles, and functional
components are described in bold with
double quotation marks “”:
e.g.)
Displaying the screen for system settings
!Touch panel keys that are available on the
screen are described in bold in brackets [ ]:
e.g.)
Touch [Settings].
!Extra information, alternatives and other
notes are presented in the following for-
mat:
e.g.)
pIf the home location has not been stored
yet, set the location first.
En 9
Chapter
01
Precaution
Precaution

!References are indicated like this:
e.g.)
=For details of the operation, refer to
Checking the device number on page
20.
Models to be upgraded
To customers who have
purchased the CNSD-350FM
This package can upgrade the software pro-
gram and database of the following models:
AVIC-F500BT
To customers who have
purchased the CNSD-300FM
This package can upgrade the software pro-
gram and database of the following models:
AVIC-X9115BT, AVIC-X910BT, AVIC-
F900BT, AVIC-F90BT, AVIC-X7115BT,
AVIC-F7010BT, AVIC-X710BT, AVIC-
F700BT
Renewed points through
this upgrade
For customers upgrading the
hardware for the first time
For customers using AVIC-F900BT,
AVIC-F90BT, AVIC-F7010BT, AVIC-F700BT
or AVIC-F500BT
By upgrading the navigation system with this
product, the points described in this manual
are changed.
For customers using AVIC-X9115BT,
AVIC-X910BT, AVIC-X7115BT or AVIC-
X710BT
By upgrading the navigation system with this
product, following points are changed.
!Map database (including POI) is renewed.
!Device Number is displayed on the “Ser-
vice Information”screen.
!The XM Satellite Radio in the lineup and
icon of the broadcast station will be chan-
ged.
The other operations are essentially the same
as those at the time you purchased the hard-
ware. Use Operation Manual included in the
hardware package as your primary reference.
For customers who have
previously upgraded the hardware
By upgrading the navigation system with this
product, following points are changed.
!Map database (including POI) is renewed.
!Device Number is displayed on the “Ser-
vice Information”screen.
!The XM Satellite Radio in the lineup and
icon of the broadcast station will be chan-
ged.
The other operations are essentially the same
as those at the time you purchased the hard-
ware. Use Operation Manual included in the
hardware package as your primary reference.
Browsing information on MSN
Direct
All MSN Direct features will be disabled.
The MSN Direct service has been discontin-
ued as of January 1, 2012. More information is
available at
http://www.pioneerelectronics.com/MSNDirectNotice
En
10
Chapter
01 Precaution

Setting items to be deleted and initialized by upgrade
The following data and settings will be cleared and reset to default values. Other items will be retained. How-
ever, some items are not listed because the setting can be easily recovered by users, such as the last map
scale, the last status of AV operation screen, etc.
Navigation functions
Destination Menu
“History”on “Address”
History
Favorites
“Saved Criteria”on “POI”
Navi Settings All settings
System Settings All settings
Others
Pin icon data
Anti-theft password
Audio functions
AV Settings All settings
SD,USB All settings (*1)
Volume setting for AV sources, EQ settings (*2)
(*1) All settings including the setting on the “Function”menu are deleted.
(*2) These settings are cleared only if you use AVIC-F500BT.
The user data stored in the internal memory of the unit may be erased if an unexpected error occurs during
software installation. Pioneer is not responsible for any data loss or unavailability of user data.
En 11
Chapter
01
Precaution
Precaution

PIONEER CNSD-350FM,
CNSD-300FM - for U.S.A.
THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
ELECTRONICS (USA) INC. (“PIONEER”).
PLEASE READ THE TERMS AND CONDI-
TIONS OF THIS AGREEMENT CAREFULLY BE-
FORE USING THE SOFTWARE INSTALLED ON
THE PIONEER PRODUCTS. BY USING THE
SOFTWARE INSTALLED ON THE PIONEER
PRODUCTS, YOU AGREE TO BE BOUND BY
THE TERMS OF THIS AGREEMENT. THE SOFT-
WARE INCLUDES A DATABASE LICENSED BY
THIRD PARTY SUPPLIER(S) (“SUPPLIERS”),
AND YOUR USE OF THE DATABASE IS COV-
ERED BY THE SUPPLIERS’SEPARATE
TERMS, WHICH ARE ATTACHED TO THIS
AGREEMENT (Refer to page 16). IF YOU DO
NOT AGREE WITH ALL OF THESE TERMS,
PLEASE RETURN THE PIONEER PRODUCTS
(INCLUDING THE SOFTWARE, AND ANY
WRITTEN MATERIALS) WITHIN FIVE (5) DAYS
OF RECEIPT OF THE PRODUCTS, TO THE
AUTHORIZED PIONEER DEALER FROM
WHICH YOU PURCHASED THEM. USE OF
THE SOFTWARE SHALL BE DEEMED TO BE
YOUR CONSENT TO THE LICENSE AGREE-
MENT.
1 GRANT OF LICENSE
Pioneer grants to you a non-transferable, non
exclusive license to use the software installed
on the Pioneer products (the “Software”) and
the related documentation solely for your own
personal use or for internal use by your busi-
ness, only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the
Software. You shall not loan, rent, disclose,
publish, sell, assign, lease, sublicense, market
or otherwise transfer the Software or use it in
any manner not expressly authorized by this
agreement. You shall not derive or attempt to
derive the source code or structure of all or
any portion of the Software by reverse engi-
neering, disassembly, decompilation, or any
other means. You shall not use the Software to
operate a service bureau or for any other use
involving the processing of data for other per-
sons or entities.
Pioneer and its licensor(s) shall retain all copy-
right, trade secret, patent and other proprie-
tary ownership rights in the Software. The
Software is copyrighted and may not be cop-
ied, even if modified or merged with other pro-
ducts. You shall not alter or remove any
copyright notice or proprietary legend con-
tained in or on the Software.
You may transfer all of your license rights in
the Software, the related documentation and a
copy of this License Agreement to another
party, provided that the party reads and agrees
to accept the terms and conditions of this Li-
cense Agreement.
2 DISCLAIMER OF WARRANTY
The Software and related documentation are
provided to you “AS IS”. PIONEER AND ITS LI-
CENSOR(S) (for the purpose of provisions 2
and 3, Pioneer and its licensor(s) shall be col-
lectively referred to as “Pioneer”) MAKES AND
YOU RECEIVE NO WARRANTY FOR THE SOFT-
WARE, WHETHER EXPRESS OR IMPLIED,
AND ALL WARRANTIES OF MERCHANTABIL-
ITY AND FITNESS FOR ANY PARTICULAR
PURPOSE FOR THE SOFTWARE ARE EX-
PRESSLY EXCLUDED. SOME STATES DO NOT
ALLOW EXCLUSION OF IMPLIED WARRAN-
TIES, SO THE ABOVE EXCLUSION MAY NOT
APPLY TO YOU. The Software is complex and
may contain some nonconformities, defects or
errors. Pioneer does not warrant that the Soft-
ware will meet your needs or expectations,
that operation of the Software will be error free
or uninterrupted, or that all nonconformities
can or will be corrected. Furthermore, Pioneer
does not make any representations or warran-
ties regarding the use or results of the use of
the Software in terms of its accuracy, reliability
or otherwise.
En
12
Chapter
02 License agreement

3 LIMITATION OF LIABILITY
IN NO EVENT SHALL PIONEER BE LIABLE
FOR ANY DAMAGES, CLAIM OR LOSS IN-
CURRED BY YOU (INCLUDING, WITHOUT LIM-
ITATION, COMPENSATORY, INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, LOST PROFITS, LOST
INCOME, LOST SALES OR BUSINESS, EXPEN-
DITURES, INVESTMENTS, OR COMMITMENTS
IN CONNECTION WITH ANY BUSINESS, LOSS
OF ANY GOODWILL, OR DAMAGES) RESULT-
ING FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF
SUCH DAMAGES. THIS LIMITATION APPLIES
TO ANY AND ALL CAUSES OF ACTION INDIVI-
DUALLY OR IN THE AGGREGATE, INCLUDING
WITHOUT LIMITATION BREACH OF CON-
TRACT, BREACH OF WARRANTY, NEGLI-
GENCE, STRICT LIABILITY,
MISREPRESENTATION, AND OTHER TORTS.
IF PIONEER’S WARRANTY DISCLAIMER OR
LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE
OR INAPPLICABLE, YOU AGREE THAT
PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50 %) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRO-
DUCT.
Some states do not allow the exclusion or lim-
itation of incidental or consequential da-
mages, so the above limitation or exclusion
may not apply to you. This warranty disclaimer
and limitation of liability shall not be applic-
able to the extent that they are prohibited by
any applicable federal, state or local law which
provides that such a disclaimer or limitation
cannot be waived or preempted.
4 EXPORT LAW ASSURANCES
You agree and certify that neither the Software
nor any other technical data received from
Pioneer, nor the direct product thereof, will be
exported outside the United States except as
authorized and as permitted by the laws and
regulations of the United States. If the Soft-
ware has been rightfully obtained by you out-
side of the United States, you agree that you
will not re-export the Software nor any other
technical data received from Pioneer, nor the
direct product thereof, except as permitted by
the laws and regulations of the United States
and the laws and regulations of the jurisdic-
tion in which you obtained the Software.
5 TERMINATION
This Agreement is effective until terminated.
You may terminate it at any time by destroying
the Software. The Agreement also will termi-
nate if you do not comply with any terms or
conditions of this Agreement. Upon such ter-
mination, you agree to destroy the Software.
6 U.S. GOVERNMENT END USERS
If the Software is being acquired by or on be-
half of the United States government or any
other entity seeking or applying rights similar
to those customarily claimed by the United
States government, the Data is licensed with
“Limited Rights”. Utilization of the Software is
subject to the restrictions specified in the
“Rights in Technical Data”clause at DFARS
252.227-7013, or the equivalent clause for non-
defense agencies. Pioneer Electronics (USA)
Inc., 1925 E. Dominguez Street, Long Beach,
CA 90810.
7 MISCELLANEOUS
This is the entire Agreement between Pioneer
and you regarding its subject matter. No
change in this Agreement shall be effective
unless agreed to in writing by Pioneer. Pioneer
retailers do not have the authority to change
this Agreement. This Agreement shall be gov-
erned by and construed in accordance with
the internal laws of the State of California. If
any provision of this Agreement is declared in-
valid or unenforceable, the remaining provi-
sions of this Agreement shall remain in full
force and effect.
En 13
Chapter
02
License agreement
License agreement

PIONEER CNSD-350FM,
CNSD-300FM - for Canada
THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
ELECTRONICS OF CANADA, INC.
(“PIONEER”). PLEASE READ THE TERMS AND
CONDITIONS OF THIS AGREEMENT CARE-
FULLY BEFORE USING THE SOFTWARE IN-
STALLED ON THE PIONEER PRODUCTS. BY
USING THE SOFTWARE INSTALLED ON THE
PIONEER PRODUCTS, YOU AGREE TO BE
BOUND BY THE TERMS OF THIS AGREE-
MENT. THE SOFTWARE INCLUDES A DATA-
BASE LICENSED BY THIRD PARTY SUPPLIER
(S) (“SUPPLIERS”), AND YOUR USE OF THE
DATABASE IS COVERED BY THE SUPPLIERS’
SEPARATE TERMS, WHICH ARE ATTACHED
TO THIS AGREEMENT (Refer to page 16). IF
YOU DO NOT AGREE WITH ALL OF THESE
TERMS, PLEASE RETURN THE PIONEER PRO-
DUCTS (INCLUDING THE SOFTWARE, AND
ANY WRITTEN MATERIALS) WITHIN FIVE (5)
DAYS OF RECEIPT OF THE PRODUCTS, TO
THE AUTHORIZED PIONEER DEALER FROM
WHICH YOU PURCHASED THEM. USE OF
THE SOFTWARE SHALL BE DEEMED TO BE
YOUR CONSENT TO THE LICENSE AGREE-
MENT.
1 GRANT OF LICENSE
Pioneer grants to you a non-transferable, non
exclusive license to use the software installed
on the Pioneer products (the “Software”) and
the related documentation solely for your own
personal use or for internal use by your busi-
ness, only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the
Software. You shall not loan, rent, disclose,
publish, sell, assign, lease, sublicense, market
or otherwise transfer the Software or use it in
any manner not expressly authorized by this
agreement. You shall not derive, or attempt to
derive, the source code or structure of all or
any portion of the Software by reverse engi-
neering, disassembly, decompilation, or any
other means. You shall not use the Software to
operate a service bureau or for any other use
involving the processing of data for other per-
sons or entities.
Pioneer and its licensor(s) shall retain all copy-
right, trade secret, patent and other proprie-
tary ownership rights in the Software. The
Software is copyrighted and may not be cop-
ied, even if modified or merged with other pro-
ducts. You shall not alter or remove any
copyright notice or proprietary legend con-
tained in or on the Software.
You may transfer all of your license rights in
the Software, the related documentation and a
copy of this License Agreement to another
party, provided that the party reads and agrees
to accept the terms and conditions of this Li-
cense Agreement.
2 DISCLAIMER OF WARRANTY
The Software and related documentation are
provided to you “AS IS”. PIONEER AND ITS LI-
CENSOR(S) (for the purpose of provisions 2
and 3, Pioneer and its licensor(s) shall be col-
lectively referred to as “Pioneer”) MAKES AND
YOU RECEIVE NO WARRANTY FOR THE SOFT-
WARE, WHETHER EXPRESS OR IMPLIED,
AND ALL WARRANTIES OF MERCHANTABIL-
ITY AND FITNESS FOR ANY PARTICULAR
PURPOSE FOR THE SOFTWARE ARE EX-
PRESSLY EXCLUDED. SOME STATES DO NOT
ALLOW EXCLUSION OF IMPLIED WARRAN-
TIES, SO THE ABOVE EXCLUSION MAY NOT
APPLY TO YOU. The Software is complex and
may contain some nonconformities, defects or
errors. Pioneer does not warrant that the Soft-
ware will meet your needs or expectations,
that operation of the Software will be error free
or uninterrupted, or that all nonconformities
can or will be corrected. Furthermore, Pioneer
does not make any representations or warran-
ties regarding the use or results of the use of
the Software in terms of its accuracy, reliability
or otherwise.
En
14
Chapter
02 License agreement

3 LIMITATION OF LIABILITY
IN NO EVENT SHALL PIONEER BE LIABLE
FOR ANY DAMAGES, CLAIM OR LOSS IN-
CURRED BY YOU (INCLUDING, WITHOUT LIM-
ITATION, COMPENSATORY, INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, LOST PROFITS, LOST
SALES OR BUSINESS, EXPENDITURES, IN-
VESTMENTS, OR COMMITMENTS IN CON-
NECTION WITH ANY BUSINESS, LOSS OF
ANY GOODWILL, OR DAMAGES) RESULTING
FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF
SUCH DAMAGES. THIS LIMITATION APPLIES
TO ALL CAUSES OF ACTION IN THE AGGRE-
GATE, INCLUDING WITHOUT LIMITATION
BREACH OF CONTRACT, BREACH OF WAR-
RANTY, NEGLIGENCE, STRICT LIABILITY, MIS-
REPRESENTATION, AND OTHER TORTS. IF
PIONEER’S WARRANTY DISCLAIMER OR
LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE
OR INAPPLICABLE, YOU AGREE THAT
PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50 %) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRO-
DUCT.
Some states do not allow the exclusion or lim-
itation of incidental or consequential da-
mages, so the above limitation or exclusion
may not apply to you. This warranty disclaimer
and limitation of liability shall not be applic-
able to the extent that they are prohibited by
any applicable federal, state or local law which
provides that such a disclaimer or limitation
cannot be waived or preempted.
4 EXPORT LAW ASSURANCES
You agree and certify that neither the Software
nor any other technical data received from
Pioneer, nor the direct product thereof, will be
exported outside Canada except as authorized
and as permitted by the laws and regulations
of Canada. If the Software has been rightfully
obtained by you outside of Canada, you agree
that you will not re-export the Software nor any
other technical data received from Pioneer,
nor the direct product thereof, except as per-
mitted by the laws and regulations of Canada
and the laws and regulations of the jurisdic-
tion in which you obtained the Software.
5 TERMINATION
This Agreement is effective until terminated.
You may terminate it at any time by destroying
the Software. The Agreement also will termi-
nate if you do not comply with any terms or
conditions of this Agreement. Upon such ter-
mination, you agree to destroy the Software.
6 MISCELLANEOUS
This is the entire Agreement between Pioneer
and you regarding its subject matter. No
change in this Agreement shall be effective
unless agreed to in writing by Pioneer. Pioneer
retailers do not have the authority to change
this Agreement. This Agreement shall be gov-
erned by and construed in accordance with
the internal laws of the Province of Ontario
and the federal laws of Canada applicable
therein. If any provision of this Agreement is
declared invalid or unenforceable, the remain-
ing provisions of this Agreement shall remain
in full force and effect.
En 15
Chapter
02
License agreement
License agreement

TERMS AND CONDITIONS FOR THE TOMTOM DATA
En
16
Chapter
02 License agreement

En 17
Chapter
02
License agreement
License agreement

En
18
Chapter
02 License agreement

About the data for the map
database
!Modifications related to roads, streets/high-
ways, terrain, construction and other things
before/during the development period may
not be reflected in this database. Inevitably,
those modifications after that period are
not reflected in this database.
!Regardless of existing and newly-built
things, the data may be different from the
actual condition.
!For details about the map coverage of this
navigation system, refer to the information
on our website.
!It is strictly prohibited to reproduce and use
any part or the whole of this map in any
form without permission from the copyright
owner.
!If the local traffic regulations or conditions
deviate from this data, follow the local traf-
fic regulations (such as signs, indications,
etc.) and conditions (such as construction,
weather, etc.).
!The traffic regulation data used in the map
database applies only to standard sized
passenger vehicles. Note that regulations
for larger vehicles, motorbikes, and other
non-standard vehicles are not included in
the database.
!TomTom Map Version, Rel. 06/2011.
!©2012 TomTom. All rights reserved. Tom-
Tom and the TomTom logo are registered
trademarks of TomTom N.V.
!Powered by NNG
Icons for XM Satellite Radio
The icon of each broadcast station is con-
tained in the hard disk drive based on the data
provided by XM Satellite Radio as of October
2011.
Any changes made by XM Satellite Radio in
the lineup or icon of the broadcast station in
the future may not be supported by the naviga-
tion system, and may cause the unit to display
incorrect icons.
En 19
Chapter
03
About the database
About the database

The navigation system
upgrade process
1Check the device number of your naviga-
tion system.
=For details, refer to Checking the device
number on this page.
j
2Check the version information.
=For details, refer to Checking the current
version on this page.
j
3Get the password for authentication.
=For details, refer to Getting the password
for authentication on the next page.
j
4Upgrade the software program of your navi-
gation system.
=For details, refer to Upgrading the soft-
ware program and the map database on
the next page.
j
5Check whether the upgrade was done prop-
erly.
j
6Update the Bluetooth firmware.
=For details, refer to Updating the
Bluetooth wireless technology software
on page 23.
Preparation for upgrade
Checking the device number
First, check your device number
(DEVICE NUMBER, displayed such as
Device Number or Device#) of your navigation
system for later procedures. To display the de-
vice number, do the following.
1 Park your vehicle in a safe place and
apply the parking brake.
2 Insert the upgrade SD memory card
into the SD card slot.
3 Turn the ignition switch OFF and back
ON to reboot the navigation system.
After a short pause, the device number will ap-
pear.
4 Write down your device number
(Device#) onto the supplied Media Number
Card (MEDIA NUMBER CARD) to avoid mis-
takes.
5 Touch [Cancel].
The navigation system restarts.
6 Turn off the vehicle engine to termi-
nate the system.
The navigation system is also turned off.
7 Eject the upgrade SD memory card.
Checking the current version
You may need the version information to con-
firm completion of upgrade. Check the version
information using the following procedure.
1 Press the MENU button to display the
“Top Menu”, and then touch [Settings].
2 Touch [System Settings].
The “System Settings”menu appears.
3 Touch [Service Information] on the
“System Settings”menu.
4 Write down the version displayed in
“Map Version”and “Version”.
En
20
Chapter
04 Instructions for upgrading