PiPO Media BOX X8 User manual

X8
Ｍｅｄｉａ BOX— X8
USER MANUAL

X8
WELCOME！
Thank you for purchasing this device。it brings you wonderful user
experience. Before beginning, please refer to this user manual carefully.
In case of any doubts regarding PIPO X8, you are welcomed to visit the PIPO
official Facebook website: www.facebook.com/pipocn, for raising your
questions and sharing your experience。Thank you！
Product features：
WiFi connection，achieve displaying synchronization easily；
Based on Intel Baytrail 3736F architecture，processor frequency is 2.16GHz；

X8
CHAPTER ONE A Glance on X8
一、 X8 Appearance

X8
KEYS
1：Power Switch key,
2： USB port, for connecting peripherals
3：Earphone jack
4：Micro USB for connecting to PC, when X8 is running Android OS
5: TF card slot: for TF card , maximum to 64GB
7: HDMI port
8: Lan RJ45 for internet cable
9: DC 12V power supply jack
二、Product Specifications

X8
Items
Function description
1
Processor
Baytrail 3736F ，frequency is 1.83GHz,up to 2.16
2
LCD
7”1280*800
3
RAM
2GB
4
Storage
32GB OR 64GB
5
OS
Windows 8.1 with Bing + Android 4.4
4
WiFi
2.4GHz , WiFi signal；
6
Connection
ports
HDMI 1.4； MicroUSB for power supply and upgrading,
and USB2.0 for peripherals；
7
Switch key
Mode switching、reset 、upgrading key；
8
Bluetooth
4.0
三、 X8 Accessories：
Name
quantity

X8
Power charger
pc
1
User manual
pc
1
CHAPTER TWO Operations
一、OS operation
1. Connect 12V 2.4A Charger to the X8 DC jack for power supplying；
2. press power button for a few seconds to turn it on;

X8
3. Select Android or Windows, press Android icon to go to regular Android
OS , and press Windows icon to go to Windows system
4.OS Switch
When you are in Windows system press the Win to And Icon for switching
into Android

X8

X8

X8
When you are in Android system, slide the top right corner, and press
the OS switch icon to set up into Windows

X8
5.HDMI output
Go to “Device”-“project”, and connect X8 to TV set (any display )
via HDMI cable

X8
5.1 PC screen only
Images could be shown only in TV BOX X8, HDMI output will be cut off
5.2 Duplicate
The HDMI output on the TV set may be not by full screen, This is
because of the X8 LCD solution is 1280*800, so the HDMI output on the
TV set is also shown by 1280*800

X8

X8
5.3 Extend
When you set up Project mode into Extend, then the X8 rotation may
Be locked, you can not rotate the X8 LCD. Press the desktop for a few
seconds, go to the setting like this in the picture. ”graphics
options ”—“rotation”—“built-in display” or “digital
television”, to set up rotation here

X8
The X8 LCD is the first screen, and the TV set display is the second screen,
move the mouse pointer outside of first screen, it will jump into second
screen and if you move the mouse pointer outside of screen screen, the
mouse pointer will jump into first screen. First screen and second screen
are separate displays, you can do different task on first screen and
second screen. For example watching video on second screen, and the the
same time skype chat or what’sapp chat with friends on the first screen.
There is a lot of fun in the Extend mode, just explore into it!

X8

X8

X8
5.4 Second screen only
In this mode, the images could only be shown on the TV set display,
And the X8 LCD will be light off. And the second screen image may be
upside down. Then please rotate the X8, place the X8 to be landscape
mode or portrait mode, the second screen could be adjusted to normal
displaying.

X8
二、Other functions
Reset
To reset or recover the X8, go to “setting”--”change PC
setting”—“update and recovery”
System upgrading and software fixing
Please download the WINPE-TOOLS and X8 Images from PIPO official website:
www.pipo.cn/en service section
Procedure：
1COPY THE WINPE_TOOLS FILE TO THE USB STORAGE,PLACE THIS FILE TO THE
ROOT(USB FORMAT TO BE NTFS AND FAT32, IT DEPENDS ON IMAGES,FOR EXAMPLE W3,
THE INSTALL .WIM FILE IS BIGGER THAN 4GB IN SIZE,THE FORMAT TO BE NTFS), THE USB
NAME SHALL BE : WINPE

X8
2. COPY THE IMAGES INTO "IMAGE"OF WIMPE_TOOLS, FOR EXAMPLE,COPY THE "
INSTALL.WIM " & " WINRE.WIM "IN W3 FOLDER INTO THE IMAGES FOLDER OF
WINPE_TOOLS
IF INSTALL W4, ENTER INTO SCRIPT,CHANGE THE MAIN_W4.CMD INTO MAIN.CMD,DELETE
ANOTHER MAIN.CMD OR RENAME IT
AFTER ALL OF THE ABOVE STEPS,START THE TABLETS WITH THE USB STORAGE INSERTED.