Planet Audio RED LINE Series User manual

All manuals and user guides at all-guides.com
all-guides.com

47
ACCESSORY
Accessory Quantity
User Manual 1PC
Wire 1PC
USB Cable 1PC
Keys 2PCS
Install metal bar 1PC
Remote controller 1PC
Warranty card 1PC
INSTRUCTIONS
All manuals and user guides at all-guides.com

3
4
4
5
6
7
8
11
12
13
14
16
17
18
20
22
23
33
36
38
39
40
41
43
44
45
46
47
CONTENTS
In-Dash DVD/MP3/CD Receiver
With 5.2” Widescreen
Touch Screen TFT Monitor
And Front Panel A/V Aux Input
P5200T
Welcome
Warning
Note
Features
Basic Operation
Panel Arrangement
Main Menu Touch Operation
OSD Setup
Adjust Mode
Remote Control Function
Loading
Touchscreen Display For Disc playback
DVD Mode
ouch Operation
Radio Operation
DVD Basic Operation
VCD Basic Operation
CD/MP3 Basic Operation
Music Surroundings Setting
EQ Setting
Audio Frequency/Tone
TV MODE
Other Play Mode
Trouble Shooting
Wiring Diagram
Specifications
Accessory
RDS T
46
SPECIFICATIONS:
Power supply
Power range
Max operate current
Install size
Ground system
Amp Rating
DC 12V
10.8-16.0V DC
10A
155X182X53mm
Negative ground
80Wattsx4Channels
FM tuner
EuropeanFrequencyrange
USAfrequencyrange
Signal/Noise ratio
Stereoseparation
Search station volt
Distortion rate
87.5-108MHz
87.5-107.9MHz
55dB
30dB
20-30dBuv
1.5%
DVD PLAYER
Signal/Noise ratio
Frequency response
70dB
20Hz-20KHz
AM tuner
522-1620KHz
530-1710KHz
32dB
EuropeanFrequencyrange
USAfrequencyrange
Limit noise sensitivity
TV tuner
Signal 48.25-863.25MHz
INSTRUCTIONS
All manuals and user guides at all-guides.com

WELCOME
To properly use this product, please go through this instruction manual for installation
and operation, put it in a safe place for future use!
WARNING
NOTE:
We keep improving this product all the time. There may be some changes in it that are
not in this manual.
Thank you for enjoying our series of digital car A/V product.
1. Please keep the disc slot clean, wipe it off when there is some dirt on it. You should
wipe off any dirt on the disc before you place it into the unit. If the disc is dirty and you
place it inside the unit, it will cause the unit to go into an error and will not play the disc.
Please ask professional to clean the laser.
2. Playing the radio at higher volumes for a long period of time may cause hearing
issues. You should play this unit at a moderate listen level.
3. This unit is set up by precision parts. If you open up this unit, you will void any and
all of your warranty.
4. Please do not touch LCD display with any hard object so that you prevent it from
getting scratched or damaged.
5. To avoid an accident caused by watching the LCD screen. This unit has a vehicle
lock out wire so that you will not be allowed to watch a video while driving down
the road.
6. This unit is meant for a 12V power and negative ground system from a vehicle.
INSTRUCTIONS
4 45
INSTRUCTIONS
WIRING DIAGRAM
This player is equipped with ISO standard connector, please follow below instruction:
● Yellow – 12 V Constant
● Black – Ground wire
● Blue - Power Antenna / Remote Amp Turn On
● Orange – Back-Up Camera Trigger (+) ● Pink – Parking Brake (-)
● White/White black - Left front speaker (+-)
● Purple/Purple black - Right rear speaker (+/-)
● Green/Green black - Left rear speaker (+/-)
● Red - ACC ON (+12V) ● Grey/Grey black - Right front speaker (+/-)
Note:
The “PARKING BRAKE” wire must be connected to the parking brake system
of your car. When the parking brake is engages, the LCD will be allowed to view
your video.If not, the screen will produce an image saying, “PARKING BRAKE”.
This is a safety feature designed for the driver not to watch a video while driving.
The video output on this unit will not be affected by this.
All manuals and user guides at all-guides.com

INSTRUCTIONS
NOTE
● This unit can play the following disc
Note: 1. This unit is compatible with MP4/DVD/VCD1.0/2.0/3.0 version,
DVD, CD-R, CD-RW, MP3, WMA, JPEG.
2. When playing a DVD, VCD, MP3, CD disc the display will auto
identify the disc and show corresponding word. When appears
on the display, that means that there is no function, please choose
another mode.
MODE
DVD
VCD
MP3
CD
ICON CONTENT DISC SIZE
Sound,image
Sound,image
Soundonly
Soundonly
12cm
12cm
12cm
12cm
5
44
INSTRUCTIONS
TROUBLE SHOOTING
After ignition
switch off, setting
information all lose
Remote control no
function
Poor performance
of radio station
Can not load disc
Can not play disc
Can not switch
language/subtitle
No image
PROBLEM
Can not power on
CAUSE
Check whether power fuse
blew or not
Some factor cause MPU wrong
operation
No enough power supply
from battery
Disc is scratched
Put wrong side of disc into unit
Lens has dirty
There is only one language/
subtitle in disc
Video line between unit and
TV is not properly connected
SOLUTION
Change fuse same as the old one
Press RESET button on the panel by pen
point, then, power on
Check whether antenna is connected or not,
or poor connection
Change new disc
Slot in the disc with sign side up
Clean lens by lens clean disc
If disc is not with multi-language/subtitle, it
cannot switch language/subtitle
Reconnect lines
Improper length of antenna,
poor connection of antenna
grounding
The disc will not go in all
the way
Change the wiring around
Change battery in remote control
Remove the 2 screws on top of the radio
Wrong connection between
ignition line ACC and
Constant 12 Volt wire
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
6 43
OTHER PLAY MODE
AUX IN:
AUX IN OPERATION
1) Press “Source” button on remote control or touch “AUX” on the touch screen, to
switch to AUX mode.
2) This will allow you to listen and or watch any source that you have plugged into this
section of the radio.
3) This unit has 1 - Video RCA input & 1 pair of Audio RCA’s for this feature.
CCD (Back-Up Camera)
1) If there is a back-up camera installed onto your car, you will need to connect it to
the CCD video input.
2) When you are backing up the car there you will see this image on your screen.
3) You can set CCD image according to your car's own position in general setting mode.
RADIO
1.AM/FM Radio Tuner
2.30 Radio Preset Stations(18FM,12AM)
DVD PLAYER
1.MPEG-4 Decoder Technology
2.Compatible with Mp4(AVI/5.X),DVD(DVD-R/DVD-RW),VCD,
SVCD,CD-RW,WMA,MP3,JPG
3.Supporting Multiple Subtitles,Angles,Languages
4.Child lock funcion
5.4-Channel Audio Output
6.pause,Play,Up/Down,Stop,Zoom,PBC Function
LCD DISPLAY
1.5.2 inch,16:9 TFT LCD display
2.Touchscreen
3.Auto adotoried panel
4.Angle turn adjustable
TV TUNER
Signal: 48.25-863.25MHz
FEATURES
All manuals and user guides at all-guides.com
all-guides.com

INSTRUCTIONS INSTRUCTIONS
7
42
BASIC OPERATION
1. SOURCE ON/OFF
Press SRC button on panel or PWR button on remote control quickly to power on.
Press SRC button on panel or PWR button on remote control longer to power off.
2. PLAYING SOURCE CHOOSE
Press SOURCE button on remote control, unit will switch sources in the following
→
3. MUTE CONTROL
Press MUTE button on panel or MUTE button on remote control shortly to turn off
sound output, press again to back to sound output.
4. VOLUME ADJUSTMENT
1) Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch
button on display to adjust volume level.
2) The volume setting on this unit is 0 - 39.
TONE MODE ADJUSTING (SEL)
Press SEL button on remote control or SEL button on the panel to choose your desired
tune mode:
NOTE:
1) DVD playing mode, MBP & User will be automatically activated.
2) After 5 seconds you choose desired mode, do not adjust volume button. The mode
will automatically take you back to status before adjustment.
5. RESET
1) If unit is not working correctly, you should press the RES button. This will reset the
radio and should start working correctly afterwards.
2) After reset, all settings will resume back to the factory default settings.
Sequence:RADIO DVD AUX TV
→
→
VOL BAS TRE L/R F/R
→ → →
→
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
8 41
1.SRC Button
2.MENU Button
3.BAND/P.N Button
4.APS/Play/Pause Button
5.MUTE Button
6.REL Button
7.SEEK- Button
8.SEEK+ Button
9.VOL+ Button
10.VOL- Button
11.Aux External Input
12.OPEN Button
13.USB Socket
14.SD Socket
15.Remote control receiver
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
9 40
BASIC FUNCTION
2.MENU Button
Press this button to back to the main menu.
5.MUTE Button
Press this button to shut off the sound output, re-press this button can resume the
sound output.
6.REL Button
Press this button to release the panel;
AUDIO FREQUENCY
This function shows that the effect of standard audio output.
TONE
Note: You can change the timbre of the sound in DVD mode. We suggest keep it in the
original place.
1.SRC Button
Short press this button to power on.
Long press this button to power off.
Every button-press activates mode
change as follows:
Note: When the device without connecting
to USB, SD, CDC or DVD no disc inside,
the system will automatically skip these
related working mode.
4.APS / Play/Pause Button
In radio state,short press this button to browse the radio stations which stored on
the no Button for 5 seconds,long press this button to auto scan & store radio
station.In playing state,press this button to select meno stereo;
Press this button at vioce playing state to execute play/pause functions.
7.SEEK- Button
At radio state, short press this button to manual seek radio frequency to forward direction,
long press this button to automatically seek radio frequency to forward direction;
At voice playing state, short press this button to select the previous song;
At TV state, short press this button to select TV channels to forward direction single steply,
long press this button to select TV channels to forward direction continuously.
3.BAND/P.N Button
In radio mode,press this button to switch hank,every time to choose band,the
sequence is as follows: FM1 FM2 FM3 AM1 AM2
In playing state,press this button to switch video system AUTO,NTISC,PAL
In TV mode, shortly press this button to switch TV sound system. The sequence is as
SECAM PAL M PAL N NTSC PAL I
TV
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
10 39
11.Aux External Input
External connected audio input;
14.SD Socket
Connect the SD memory card to this socket, and the unit can play MP3 music.
15.Remote control receiver
It can receive infrared message of remote control.
9.VOL+ Button
Press this button to increase the volume.
10.VOL- Button
Press this button to reduce the volvme.
EQ SETTING
User defined
Classic
Standard
Rock
Jazz
Pop
13.USB Socket
Connect the USB memory to this socket, and the unit can play music format files
supported by this unit in the USB memory.
12.OPEN Button
Press this button can eject the disc.
Slot indicator light RESET Light
RESET Button Disk slot
8.SEEK+ Button
At radio state, short press this button to manual seek radio frequency to backward direction,
long press this button to automatically seek radio frequency to back ward direction'
At voice playing state, short press this button to select the next song;
At TV state, short press this button to select TV channels to backward direction single steply,
long press this button to select TV channels to backward direction continuously.
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
11
38
MAIN MENU TOUCH OPERATION (PIC 1)
RADIO
DVD
POWER
AUX INPUT
BLUETOOTH
TV
GPS
IPOD
USB/SD
OSD SET
CDC
This unit without CDC/GPS/BLUETOOTH function.
MUSIC SURROUNDINGS SETTING (PIC 7)
Church
Concert
Passive
Wide
Live
Note: This function only is used with the remote control in CD/MP3/USB/SD mode.
Once you have one of these settings on. You will no longer have Bass & Treble
adjustments until this feature is set to off.
All manuals and user guides at all-guides.com
all-guides.com

INSTRUCTIONS INSTRUCTIONS
12 37
Time display: Touch main menu into adjust mode, press time setup button, the
corresponding function will be display in yellow words.
(1)Press “+” on hour to add hour, press “-” to reduce hour;
(2)Press “+” on minute to add minute, press “-” to reduce minute.
NOTE: Touch the correspondence function, will be display in green background.
The unit include two times system: Europe time (24 hour setup), America time (12
hour setup), when show the AM mark it indicate morning time, when appear the PM
mark, it show the time of afternoon.
OSD SETUP (PIC 2)
Exit
Minute Hour
Radio frequency setting
RDS on/off optional
Time setting
Note: Touch corresponding function,
it will display in yellow words reminding,
and blue back ground reminding.
TIME DISPLAY AND ADJUST
Back-up Camera
left/right selection
Note: There are 3 buttons automatically changed according to your setting change in
radio state when you activate or exit RDS; Change are as following:
PTY LOUD; TA EQ; AF ST;
Remark: This unit is with RDS function, it will automatically adjust the time when you
activate RDS function or have received RDS radio channels. At no received RDS radio
channels or AM state, you should adjust the time.
10. CD Program Play
In CD mode, you can set the sequence of playing by the program function, the operation
is as follows:
When CD is playing, press ST/PROG button, then the display shows:
Input the number of the song you want to program by the remote control, program the
first song, input your desired song, for example, the sixth song, and press number button
6 on the remote control. Program the second song, press button move the cursor to
2 . Input your desired song, for example, the ninth song, press number button 9 on
the remote control. Press button to program play.
Back to the normal mode, press the ST/PROG button, then press button.
Note: This function can only be worked by the remote control.
11. MP3 Program Play
In MP3 mode, you can set the sequence of playing by the program function, the
operation is as follows:
When MP3 is playing, press ST/PROG button, then the display shows:
Then, input desired song by remote control.
For example: Program the first song, input 01, press button move the cursor to the
second lattice, input desired song, for example the third song. Program the second song,
press button, work with button, move the cursor to 2 . Input 01, press button
move the cursor to the second lattice, input desired song, for example, the sixth song
(press 6). Press button to program play.
Back to the normal mode, press the ST/PROG button and then press button.
Note: This function can only be worked by the remote control.
PROG
TC
3__:__
4__:__
TC
7__:__
8__:__
5__:__
6__:__
TC
11__:__
12__:__
9__:__
10__:__
TC
15__:__
16__:__
13__:__
14__:__
PLAY DELETE
1__:__
2__:__
PROG
TC
3__:__
4__:__
TC
7__:__
8__:__
5__:__
6__:__
TC
11__:__
12__:__
9__:__
10__:__
TC
15__:__
16__:__
13__:__
14__:__
PLAY DELETE
1__:__
2__:__
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
13 36
ADJUST MODE (PIC 3)
VOL: press +/- button
to adjust volume
Poweroff
Sharp: press +/- button to adjust
sharp sound high and low
Bass: press +/- button to
adjust bass level
Back main menu
EQ mode
From Rock POP
Classic
Off
DBAS on/off: press once
to DBAS on, press again
to DBAS off
Loud: press once off LOUD
on, press again to turn off
Choose the best listening
place; this function will
make you enjoy the best
comfortable sound effects
Resume standard video
Exit setup
F.F/F.R:Adjust front
and rear speaker
B.L/B.R:Adjust left
and right speaker
Slide in CD/MP3 disc, unit will play it automatically. If disc is in slot, press DVD touch
button on main menu can to play.
1. Repeat Play
In CD/MP3 mode, press AMS/RPT button on remote control, to startup following, repeat
CD disc: Single song repeat→ Repeat play off.
MP3 disc: Single song repeat→Directory repeat→ Repeat play off.
2. Fast Forward/Fast Rewind
Press SEEK + / SEEK - button on remote control, or / touch button on display to
speed forward or backward playing.
Note: Hold above button a bit longer to operate.
3. Previous/Next Song Play
In playing mode, press SEEK + / SEEK - on remote control, or / touch button on
display to choose previous/next song.
4. Pause Play
In play mode, press button on remote control, or button on display to pause.
Press again to go back to normal play.
5. Stop Play
In play mode:
1) Press button on remote control to enter the pause mode, the position will be stored
in unit. At that time, press button on remote control or touch button on display to
resume playing at the stored position.
2) Press button on remote control twice to enter into stop mode, here, press
button on remote control or touch button on display, unit will play from the first song.
6. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
7. Randomly Play
In CD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
8. EQ Mode
1) This function can only be worked by remote control.
2) When playing CD/MP3, press the “ZOOM” button on the remote control, you can
choose the sound mode.
3) When enter this function, press the button / / / to move the course to select
sound mode which in the system menu, after your selection position will show red color
to indicate the confirmation.
9. OPEN
Press OPEN button on panel to eject disc.
CD/MP3 BASIC OPERATION (Look at Picture #4)
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
14 35
PROG
TC
3__:__
4__:__
TC
7__:__
8__:__
5__:__
6__:__
TC
11__:__
12__:__
9__:__
10__:__
TC
15__:__
16__:__
13__:__
14__:__
PLAY DELETE
1__:__
2__:__
15. VCD Program Playing
In VCD mode, you can set playing sequence of songs by program play function.
The program playing operation steps are as follows:
In VCD mode, press ST/PTOG button, display will show:
Input the songs which you want to programmed by the number buttons on remote
control. For example: Program the first song, input your desires song, for example, the
fourth song, and press number button 4 on the remote control. Program the second song,
press button move the cursor to 2 . Input your desired song, for example, the
eighth song, press number button 8 on the remote control. Press button to program
play. Back to the normal mode, press the ST/PROG button, then press button.
Note: This function can only be worked by the remote control.
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
15
34
8. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
9. Number Buttons
In VCD mode, press 0-9 number button to input song. For example, you want to choose
13th song, press 10+ button, and then press 3 button once to play 13th song.
Note: This function can only be worked by the remote control.
10. Repeat Play
In playing mode, press AMS/RPT button on remote control, to startup following, repeat
function. Single song repeat→ Repeat play off.
Note:
1) When playing VCD disc, if PBC is on, no repeat function.
2) After unit is power off or mode is switched to other playing mode except VCD mode.
if you switch back to VCD mode, repeat playing will be cancelled.
11. Randomly Play
In VCD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
Note: When VCD disc, if PBC is on, RDM will not work.
12. Switch Track
In VCD mode, press AUDIO button on remote control to switch track as following
sequence:
13. OPEN
Press OPEN button on panel to eject disc.
Left Right Stereo
14. PBC (MENU) Play
In VCD mode, press this button then play the PBC and display will show whole menu
in disc, work with number button to choose song. When you are playing either song
of the PBC, and you want to stop to select another song, press the button to turn off.
Note:
1) This function can be worked by the control.
2) PBC is suitable for the SVCD and VCD 2.0 disc.
3) In PBC mode, you can not press number button only to choose song.
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
16 33
This white bar shows the rate
of process of loading a disc.
Note: When loading a disc, touch screen function can not be used.
LOADING
All manuals and user guides at all-guides.com
all-guides.com

INSTRUCTIONS INSTRUCTIONS
32 17
DIGITAL SETUP
1. Press or button 2. Press / / / button, then to enter.
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
DIGITAL SETUP
LINE OUT
RF REMOD
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
STEREO
MONO L
MONO R
MIX MONO
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
DIGITAL SETUP
FULL
6/8
4/8
2/8
OFF
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
18 31
DVD MODE (PIC 5)
AUDIO SETTING ON TOUCH SCREEN
Bass choosing: when
touched the button will be
yellow, touch this button
to exit, touch it again to
resume.
Loud choosing: this function is defined
open, when it is touched at the first time,
the loud function will be closed, at the
same time, yellow light disappear.
Audio selection:
VOL → BAS → TRE → BAL → FAD
When using this function, the position
bar will be highlighted.
EQ mode: Touch the button
to change settings:
ROCK → POP → CLASSIC → OFF
Change the
listening position
EXIT SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
VIDEO SETUP
EXIT SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
VIDEO SETUP
EXIT SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
VIDEO SETUP
12
10
8
6
4
2
0
EXIT SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
VIDEO SETUP
8
6
4
2
0
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
19
30
VIDEO SETTING ON TOUCH SCREEN
Image mode: You can choose the area in the
broken line on the panel, standard, defined,
soft, according what you need to choose,
the blue back light will disappear.
You can choose: Brightness, Contrast, Color,
Hue, adjust the image effect according to
your sight. The blue bar will show your level.
Video mode: When using this
function, the position will be darker
on the screen.
1. Press or button 2. Press / / / button, then to enter.
VIDEO SETUP
EXIT SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
VIDEO SETUP
EXIT SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
VIDEO SETUP
EXIT SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
VIDEO SETUP
EXIT SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
VIDEO SETUP
12
10
8
6
4
2
0
EXIT SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
VIDEO SETUP
12
10
8
6
4
2
0
EXIT SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
VIDEO SETUP
+ 6
+ 4
+ 2
- 0
- 4
- 6
- 2
All manuals and user guides at all-guides.com

INSTRUCTIONS INSTRUCTIONS
20 29
FM1 87.50MHz
87.50MHz
90.00MHz 108.00MHz
106.00MHz
98.00MHz 87.50MHz
RDS TOUCH OPERATION (PIC 6)
Poweroff
Press this button
to adjust angles
of the monitor
Short press on this button to increase radio frequency;
longer press on this button to seek radio channels
frequency increased direction.
Short press on this button to decrease radio frequency;
longer press on this button to seek radio channels
frequency decreased direction.
Touch this area to enter
& exit main menu.
In the radio state, press “APS” button,
it will automatically seek radio
channels in the whole band and preset
the strongest radio channels.
Press “SEL” to adjust other
functions, please refer to pic 3.
Press this button to exit balance left & right
speaker, re-press this button to resume
balance left & right speaker function.
Press this button to close sound outpt,
re-press this button to resume sound.
Press this button to close stereo output,
re-press this button to resume stereo
output.
For details of RDS operation,please refer to other instruction
1. Press or button 2. Press / / / button, then to enter.
AUDIO SETUP
EXIT SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
LANGUAGE SETUP
EXIT SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
LANGUAGE SETUP
EXIT SETUP
AUDIO OUT
KEY
AUDIO SETUP
AUDIO OUT
KEY
EXIT SETUP
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
AUDIO SETUP
EXIT SETUP
AUDIO SETUP
AUDIO OUT
KEY
AUDIO OUT
EXIT SETUP
AUDIO SETUP
KEY #
+4
+2
0
-2
-4
Press this button each time, it
will automatically execute the
following operation in an order
→
→
→→
of FM1 FM2 FM3
AM1 AM2
Pree TA,when TA is on,it
mean the unit is automatically
track RDS radio channels.
All manuals and user guides at all-guides.com