Planet IVS-100 User manual

Table of Contents
Requirements
1
Physical Installation
2
Video Server administration
3
Further Configuration
5

This page is intentionally left blank

1
Thank you for purchasing PLANET IVS-100, Internet video server for IP surveillance
applications. Before installation, please be sure to read this quick installation guide and
user's manual carefully to complete machine installation.
Requirements
IVS-100
Network Environment
LAN
10/ 100M Ethernet
Camera
Analog camera with coaxial connector
Monitoring System Recommended
System Hardware
•
CPU: Pentium III, 800 MHz or above
•
Memory Size: 128 MB (256 MB recommended)
•
VGA card resolution: 1024 x 768 or above
System Requirement for Viewer & Recorder Application
Support OS
Win 98 SE, Win 2000, Win Me, Win XP
System Hardware
1-4 cameras surveillance application
•
CPU: Pentium III, 800 MHz or above
•
Memory Size: 128 MB (256 MB recommended)
•
VGA card resolution: 1024 x 768 or above
4 or more cameras surveillance application
•
CPU: Pentium 4, 1.7G MHz or above
•
Memory Size: 512 MB or above
•
VGA card resolution: 1024 x 768 or above

2
Physical Installation
1. Connect an Ethernet cable
Connect one end of an Ethernet cable to the
LAN
port located on the IVS-100
LAN port located on the IVS-100 LAN
rear panel and attach the other end to the net-work device (hub or switch).
2. Connect the CCTV camera
Connect CCTV camera cable to the
Video-in
port located on the IVS-100 front
panel and make sure the camera securely connected.
3. Attach the external power supply
Connect the provided power adapter to the IVS-100 s connector labeled
“12VDC” on rear panel. Power on the CCTV camera as well.
4. Check the LEDs
The STATUS would be
ON
, and the 10/100 LED would flash for few times to
detect network connection. The network indication LEDs would be on depend-
ing on which network type is available.
Front panel of IVS-100
Rear panel of IVS-100

3
Video Server administration
PLANET IVS-100 provides GUI (Web based, Graphical User Interface) for machine
management and maintenance.
When you installed your IP camera over your network environment,
To start IVS-100 web con guration, you must have one of these web browsers installed
on computer for web management
•
Microsoft Internet Explorer 6.0 or higher with Java support
Default LAN interface IP address of IVS-100 is
192.168.0.20
. You may now open your
web browser, and insert
http://192.168.0.20
in the address bar of your web browser to
logon IVS-100 web con guration page.
IVS-100 will prompt for User Name and Password, please enter:
admin
as username to
continue machine Web Management.
If dif culty is met, please refer to the following steps to establish the connection:
•
Your PC can establish a physical connection to the Internet Camera. The PC
and the Video Server must be directly connected (using the LAN port on the
IVS-100) or on the same LAN segment. That is, the PC must be configured
to an IP address and subnet mask in 192.168.0.x segment. For example: IP:
192.168.0.2, subnet mask: 255.255.255.0.
•
The Internet Video Server must be installed and powered ON.
•
If the IVS-100’s default IP Address (
192.168.0.20
) is already used by another
device, the other device must be turned OFF until the Video Server is allocated
a new IP Address during configuration.
Or you may execute
IPEditV3
to discover IVS-100’s IP ad-dress. Before starting
installation, please ensure that:
Procedures of IPEdit utility
•
Please find the
IPEditV3.exe
in the Utility folder on user s manual CD
•
Double-click the
IPEditV3.exe
and the following screen should be prompt on
your computer.
•
Choose the destination camera for IP address and device name modifications.

4
•
After modifications, you may now connect the IVS-100 via web browser.

5
Further Configuration
If you want to con gure more detail settings of IVS-100, please refer to our user s manual
in the CD. If you have any dif culty on resolving the problem while installing or using the
camera, please feel free to contact PLANET for support.

6
This page is intentionally left blank